sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Filho, Cesar Meirelles

Normalized to: Filho, C.

7 article(s) in total. 13 co-authors, from 1 to 2 common article(s). Median position in authors list is 1,0.

[1]  oai:arXiv.org:1704.08089  [pdf] - 1724820
Constraints on kinematic parameters at $z\ne0$
Comments: 16 pages, 6 tables, 5 figures, accepted for publication in JCAP
Submitted: 2017-04-26, last modified: 2018-07-11
The standard cosmographic approach consists in performing a series expansion of a cosmological observable around $z=0$ and then using the data to constrain the cosmographic (or kinematic) parameters at present time. Such a procedure works well if applied to redshift ranges inside the $z$-series convergence radius ($z<1$), but can be problematic if we want to cover redshift intervals that fall outside the $z-$series convergence radius. This problem can be circumvented if we work with the $y-$redshift, $y=z/(1+z)$, or the scale factor, $a=1/(1+z)=1-y$, for example. In this paper, we use the scale factor $a$ as the variable of expansion. We expand the luminosity distance and the Hubble parameter around an arbitrary $\tilde{a}$ and use the Supernovae Ia (SNe Ia) and the Hubble parameter data to estimate $H$, $q$, $j$ and $s$ at $z\ne0$ ($\tilde{a}\neq1$). We show that the last relevant term for both expansions is the third. Since the third order expansion of $d_L(z)$ has one parameter less than the third order expansion of $H(z)$, we also consider, for completeness, a fourth order expansion of $d_L(z)$. For the third order expansions, the results obtained from both SNe Ia and $H(z)$ data are incompatible with the $\Lambda$CDM model at $2\sigma$ confidence level, but also incompatible with each other. When the fourth order expansion of $d_L(z)$ is taken into account, the results obtained from SNe Ia data are compatible with the $\Lambda$CDM model at $2\sigma$ confidence level, but still remains incompatible with results obtained from $H(z)$ data. These conflicting results may indicate a tension between the current SNe Ia and $H(z)$ data sets.
[2]  oai:arXiv.org:1402.1150  [pdf] - 780745
Hydrothermal formation of Clay-Carbonate alteration assemblages in the Nili Fossae region of Mars
Comments: 21 pages, 7 figures, 2 tables
Submitted: 2014-02-05
The Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) has returned observations of the Nili Fossae region indicating the presence of Mg- carbonate in small (<10km sq2), relatively bright rock units that are commonly fractured (Ehlmann et al., 2008b). We have analyzed spectra from CRISM images and used co-located HiRISE images in order to further characterize these carbonate-bearing units. We applied absorption band mapping techniques to investigate a range of possible phyllosilicate and carbonate minerals that could be present in the Nili Fossae region. We also describe a clay-carbonate hydrothermal alteration mineral assemblage in the Archean Warrawoona Group of Western Australia that is a potential Earth analog to the Nili Fossae carbonate-bearing rock units. We discuss the geological and biological implications for hydrothermal processes on Noachian Mars.
[3]  oai:arXiv.org:0803.3851  [pdf] - 11251
On the double natured solutions to the two-temperature external soft photon comptonized accretion disks
Comments: 7 pages, 6 tables
Submitted: 2008-03-26
We have analyzed pair production in the innermost region of a two-temperature external soft photon comptonized accretion disk. We have shown that, if the viscosity parameter is greater than a temperature and r dependent critical value, the solution to the disk equation is double valued: one, advection dominated and the other, radiation dominated. When the viscosity parameter is below this critical value, the accretion rate has to be confined within a region limited by a minimum and a maximum accretion rates in order to have two steady state solutions. These critical accretion rates are shown to be dependent on r, on the temperature and on the viscosity parameter . Depending on the combination of the parameters, the advection dominated solution may not be physically consistent.
[4]  oai:arXiv.org:0710.3130  [pdf] - 6094
An Alternative Look To Precession In Accretion Disks
Comments: 34 pages, 5 figures By mistake the name of the other two authors have been included in the first submission. These names have been withdrawn
Submitted: 2007-10-16, last modified: 2007-10-17
We have considered precession in accretion disks in which a second moment of inertia relative to an axis perpendicular to the axis of rotation may be very important. This formalism, that takes into account the precession contribution to the angular momentum, is based on the existence of a parameter $\it p$ which determines three characteristic densities resulting from the averaging process and imposes constraints on the actual disk density. It is shown that the precession velocity will lie in a three branch solution, and depends on how large is the disk actual density as compared to the characteristic densities. Besides the large spread on the solution for the precession velocity, depending on the density strength, it may be prograde and retrograde. It is shown that the keplerian thin disk, with very large density values compared to characteristic ones, only precesses very far away from the primary object, which implies very large precession periods. For other models, the disk will thicken, with large deviations from the keplerian approximation. Constraints on the density only will be effective for very large values of the ratio ${{\dot M} \over M_{p}}$, respectively, accretion rate and mass of the primary. Under this condition, the structure of the precessing region is found. Lower bounds on the precession period are found for not so large values of this ratio. Deviations from the mean precessional motion are considered. It is shown that these deviations result in periodic motions as long as the time scales associated to them are comparable to the remaining time scales. Otherwise, they result in misalignment motions, forcing the plane of the disk to become normal to the orbital plane of the secondary.
[5]  oai:arXiv.org:0710.1805  [pdf] - 5846
The dependence of the viscosity-parameter on the disk scale height profile
Comments: 8 pages, submitted to ApjL
Submitted: 2007-10-09
It is shown that the height scale for accretion disks is a constant whenever hydrostatic equilibrium and sub-sonic turbulence regime hold in the disk. In order to have a variable height scale, processes that do contribute with an extra term to the continuity equation are needed. This makes the viscosity parameter much greater in the outer region and much smaller in the inner region. Under these circumstances, turbulence is a presumable source of viscosity in the disk.
[6]  oai:arXiv.org:astro-ph/0401447  [pdf] - 62317
Are there thin accretion disks?
Comments: 17 pages; uses AASTeX v5.0; submitted to ApJ
Submitted: 2004-01-22, last modified: 2004-01-23
Total and internal energy requirements set constraints on the allowable temperature on the disk. In a gas pressure dominated disk, they lead to a cooling rate that decreases with temperature. These findings are used to show that the flow is mildly supersonic, with the azimuthal Mach number moderately exceeding one in a large extent of the disk. Only in the narrow outermost region, of about 12% of the disk extent, the Mach number greatly exceeds one. It is also shown that, under most favorable conditions, radiation can, at the most, transport 20% of the heat produced, close to the inner radius. Far away, under the same conditions, this efficiency can rise to 100%. This result depends only on boundary conditions, being independent of the accretion rate and mass of the central object.The geometrical thin disk approximation is violated everywhere in the disk, except in the narrow region where, under the unlikely assumption of thermodynamical equilibrium or, at least, local equilibrium, the flow is indeed supersonic.
[7]  oai:arXiv.org:astro-ph/0207537  [pdf] - 50680
Pion production in the inner disk around Cygnus X-1
Comments: 23 pages, 11 figures
Submitted: 2002-07-24
Neutron production via ^{4}He breakup and p(p, n{pi}^+)p is considered in the innermost region of an accretion disk surrounding a Kerr Black Hole. These reactions occur in a plasma in Wien equilibrium, where (radiatively produced) pair production equals annihilation. Cooling of the disk is assumed to be due to unsaturated inverse Comptonization of external soft photons and to the energy needed to ignite both nuclear reactions. Assuming matter composition of 90% Hydrogen and 10% He, it is shown that, close to the border of this region, neutron production is essentially from ^{4}He breakup. Close to the horizon, the contribution from p(p, n{pi}^+)p to the neutron production is comparable to that from the breakup. It is shown that the viscosity generated by the collisions of the accreting matter with the neutrons may drive stationary accretion, for accretion rates below a critical value. In this case, solution to the disk equations is double-valued and for both solutions protons overnumber the pairs. It is claimed that these solutions may mimic the states of high and low luminosity observed in Cygnus X-1 and related sources. This would be explained either by the coupling of thermal instability to the peculiar behavior of the viscosity parameter alpha with the ion temperature that may intermittently switch accretion off or by the impossibility of a perfect tuning for both thermal and pair equilibrium in the disk, a fact that forces the system to undergo a kind of limit cycle behavior around the upper solution.