To achieve mass, power, and cost reduction, there is a trend to reduce the volume of many instruments aboard spacecraft, especially for small spacecraft (cubesats or nanosats) with very limited mass, volume and power budgets. With the current trend of miniaturizing spacecraft instruments one could naturally ask if is there a physical limit to this process for star sensors. This paper shows that there is a fundamental limit on star sensor accuracy, which depends on stellar distribution, star sensor dimensions and exposure time. An estimate of such limit is given for our location in the galaxy.

The protoMIRAX hard X-ray imaging telescope is a balloon-borne experiment developed as a pathfinder for the MIRAX satellite mission. The experiment consists essentially in a coded-aperture hard X-ray (30-200 keV) imager with a square array (13$\times$13) of 2mm-thick planar CZT detectors with a total area of 169 cm$^2$. The total, fully-coded field-of-view is $21^{\circ}\times 21^{\circ}$ and the angular resolution is 1$^{\circ}$43'. In this paper we describe the protoMIRAX instrument and all the subsystems of its balloon gondola, and we show simulated results of the instrument performance. The main objective of protoMIRAX is to carry out imaging spectroscopy of selected bright sources to demonstrate the performance of a prototype of the MIRAX hard X-ray imager. Detailed background and imaging simulations have been performed for protoMIRAX balloon flights. The 3$\sigma$ sensitivity for the 30-200 keV range is ~1.9 $\times$ 10$^{-5}$ photons cm$^{-2}$ s$^{-1}$ for an integration time of 8 hs at an atmospheric depth of 2.7 g cm$^{-2}$ and an average zenith angle of 30$^{\circ}$. We have developed an attitude control system for the balloon gondola and new data handling and ground systems that also include prototypes for the MIRAX satellite. We present the results of Monte Carlo simulations of the camera response at balloon altitudes, showing the expected background level and the detailed sensitivity of protoMIRAX. We also present the results of imaging simulations of the Crab region. The results show that protoMIRAX is capable of making spectral and imaging observations of bright hard X-ray source fields. Furthermore, the balloon observations will carry out very important tests and demonstrations of MIRAX hardware and software in a near space environment.