Normalized to: Favre, J.
[1]
oai:arXiv.org:1507.05806 [pdf] - 1273233
Properties of Cosmological Filaments extracted from Eulerian Simulations
Submitted: 2015-07-21
Using a new parallel algorithm implemented within the VisIt framework, we
analysed large cosmological grid simulations to study the properties of baryons
in filaments. The procedure allows us to build large catalogues with up to
$\sim 3 \cdot 10^4$ filaments per simulated volume and to investigate the
properties of cosmic filaments for very large volumes at high resolution (up to
$300^3 ~\rm Mpc^3$ simulated with $2048^3$ cells). We determined scaling
relations for the mass, volume, length and temperature of filaments and
compared them to those of galaxy clusters. The longest filaments have a total
length of about $200 ~\rm Mpc$ with a mass of several $10^{15} M_{\odot}$. We
also investigated the effects of different gas physics. Radiative cooling
significantly modifies the thermal properties of the warm-hot-intergalactic
medium of filaments, mainly by lowering their mean temperature via line
cooling. On the other hand, powerful feedback from active galactic nuclei in
surrounding halos can heat up the gas in filaments. The impact of
shock-accelerated cosmic rays from diffusive shock acceleration on filaments is
small and the ratio of between cosmic ray and gas pressure within filaments is
of the order of $\sim 10-20$ percent.
[2]
oai:arXiv.org:1405.2938 [pdf] - 891961
The energetics of relativistic magnetic reconnection: ion-electron
repartition and particle distribution hardness
Submitted: 2014-05-12
Collisionless magnetic reconnection is a prime candidate to account for
flare-like or steady emission, outflow launching, or plasma heating, in a
variety of high-energy astrophysical objects, including ones with relativistic
ion-electron plasmas. But the fate of the initial magnetic energy in a
reconnection event remains poorly known: what is the amount given to kinetic
energy, the ion/electron repartition, and the hardness of the particle
distributions? We explore these questions with 2D particle-in-cell simulations
of ion-electron plasmas. We find that 45 to 75% of the total initial magnetic
energy ends up in kinetic energy, this fraction increasing with the inflow
magnetization. Depending on the guide field strength, ions get from 30 to 60%
of the total kinetic energy. Particles can be separated into two populations
that only weakly mix: (i) particles initially in the current sheet, heated by
its initial tearing and subsequent contraction of the islands; and (ii)
particles from the background plasma that primarily gain energy via the
reconnection electric field when passing near the X-point. Particles (ii) tend
to form a power-law with an index $p=-d\log n(\gamma)/d\log\gamma$, that
depends mostly on the inflow Alfv\'en speed $V_A$ and magnetization $\sigma_s$
of species $s$, with for electrons $p=5$ to $1.2$ for increasing $\sigma_e$.
The highest particle Lorentz factor, for ions or electrons, increases roughly
linearly with time for all the relativistic simulations. This is faster, and
the spectra can be harder, than for collisionless shock acceleration. We
discuss applications to microquasar and AGN coronae, to extragalactic jets, and
to radio lobes. We point out situations where effects such as Compton drag or
pair creation are important.
[3]
oai:arXiv.org:1405.0600 [pdf] - 818297
Simulation of microquasars -- the challenge of scales
Submitted: 2014-05-03
We present first results of a long-term project which aims at multi-scale,
multi-physics simulations of wind accretion in microquasars and high-mass X-ray
binaries. The 3D hydrodynamical simulations cover all scales, from the
circum-binary environment down to the immediate vicinity of the black hole. We
first introduce the numerical method and parallelization strategy of the AMR
A-MAZE code. We then discuss some preliminary results of how, and on what
scales, an accretion disk is formed around the black hole. We finally present
some characteristics of this disk, which is far from Keplerian. We emphasize
that on all scales shocks play a decisive role for the accretion process and
the process of structure formation -- for the formation of the large scale,
nearly coherent structure of the disk, but also for the formation of turbulent
fluctuations.
[4]
oai:arXiv.org:1404.7366 [pdf] - 891957
Relativistic magnetic reconnection in collisionless ion-electron plasmas
explored with particle-in-cell simulations
Submitted: 2014-04-29
Magnetic reconnection is a leading mechanism for magnetic energy conversion
and high-energy non-thermal particle production in a variety of high-energy
astrophysical objects, including ones with relativistic ion-electron plasmas
(e.g., microquasars or AGNs) - a regime where first principle studies are
scarce. We present 2D particle-in-cell (PIC) simulations of low $\beta$
ion-electron plasmas under relativistic conditions, i.e., with inflow magnetic
energy exceeding the plasma rest-mass energy. We identify outstanding
properties: (i) For relativistic inflow magnetizations (here $10 < \sigma_e <
360$), the reconnection outflows are dominated by thermal agitation instead of
bulk kinetic energy. (ii) At large inflow electron magnetization ($\sigma_e >
80$), the reconnection electric field is sustained more by bulk inertia than by
thermal inertia. It challenges the thermal-inertia-paradigm and its
implications. (iii) The inflows feature sharp transitions at the entrance of
the diffusion zones. These are not shocks but results from particle ballistic
motions, all bouncing at the same location, provided that the thermal velocity
in the inflow is far smaller than the inflow E cross B bulk velocity. (iv)
Island centers are magnetically isolated from the rest of the flow, and can
present a density depletion at their center. (v) The reconnection rates are
slightly larger than in non-relativistic studies. They are best normalized by
the inflow relativistic Alfv\'en speed projected in the outflow direction,
which then leads to rates in a close range (0.14-0.25) thus allowing for an
easy estimation of the reconnection electric field.
[5]
oai:arXiv.org:1401.0816 [pdf] - 766714
Supersonic turbulence in 3D isothermal flow collision
Submitted: 2014-01-04
Colliding supersonic bulk flows shape observable properties and internal
physics of various astrophysical objects, like O-star winds, molecular clouds,
galactic sheets, binaries, or gamma-ray bursts. Using numerical simulations, we
show that the bulk flows leave a clear imprint on the collision zone, its mean
properties and the turbulence it naturally develops. Our model setup consists
of 3D head-on colliding isothermal hydrodynamical flows with Mach numbers
between 2 and 43. Simulation results are in line with expectations from
self-similarity: root mean square Mach numbers (Mrms) scale linearly with
upstream Mach numbers, mean densities remain limited to a few times the
upstream density. The density PDF is not log-normal. The turbulence is
inhomogeneous: weaker in the zone center than close to the confining shocks. It
is anisotropic: while Mrms is generally supersonic, Mrms transverse to the
upstream flow is always subsonic. We argue that uniform, isothermal, head-on
colliding flows generally disfavor isotropic, supersonic turbulence. The
anisotropy carries over to other quantities like the density variance - Mach
number relation. Structure functions differ depending on whether they are
computed along a line-of-sight perpendicular or parallel to the upstream flow.
We suggest that such line-of-sight effects should be kept in mind when
interpreting turbulence characteristics derived from observations.
[6]
oai:arXiv.org:1309.1360 [pdf] - 1179032
Circum-stellar medium around rotating massive stars at solar metallicity
Submitted: 2013-09-05, last modified: 2013-10-03
Aims. Observations show nebulae around some massive stars but not around
others. If observed, their chemical composition is far from homogeneous. Our
goal is to put these observational features into the context of the evolution
of massive stars and their circumstellar medium (CSM) and, more generally, to
quantify the role of massive stars for the chemical and dynamical evolution of
the ISM. Methods. Using the A-MAZE code, we perform 2d-axisymmetric
hydrodynamical simulations of the evolution of the CSM, shaped by stellar
winds, for a whole grid of massive stellar models from 15 to 120 Msun and
following the stellar evolution from the zero-age main-sequence to the time of
supernova explosion. In addition to the usual quantities, we also follow five
chemical species: H, He, C, N, and O. Results. We show how various quantities
evolve as a function of time: size of the bubble, position of the wind
termination shock, chemical composition of the bubble, etc. The chemical
composition of the bubble changes considerably compared to the initial
composition, particularly during the red-supergiant (RSG) and Wolf-Rayet (WR)
phases. In some extreme cases, the inner region of the bubble can be completely
depleted in hydrogen and nitrogen, and is mainly composed of carbon, helium and
oxygen. We argue why the bubble typically expands at a lower rate than
predicted by self-similarity theory. In particular, the size of the bubble is
very sensitive to the density of the ISM, decreasing by a factor of around 2.5
for each additional dex in ISM density. The bubble size also decreases with the
metallicity of the central star, as low-metallicity stars have weaker winds.
Our models qualitatively fit the observations of WR ejecta nebulae.
[7]
oai:arXiv.org:1308.5892 [pdf] - 744527
Apar-T: code, validation, and physical interpretation of
particle-in-cell results
Submitted: 2013-08-27
We present the parallel particle-in-cell (PIC) code Apar-T and, more
importantly, address the fundamental question of the relations between the PIC
model, the Vlasov-Maxwell theory, and real plasmas.
First, we present four validation tests: spectra from simulations of thermal
plasmas, linear growth rates of the relativistic tearing instability and of the
filamentation instability, and non-linear filamentation merging phase. For the
filamentation instability we show that the effective growth rates measured on
the total energy can differ by more than 50% from the linear cold predictions
and from the fastest modes of the simulation.
Second, we detail a new method for initial loading of Maxwell-J\"uttner
particle distributions with relativistic bulk velocity and relativistic
temperature, and explain why the traditional method with individual particle
boosting fails.
Third, we scrutinize the question of what description of physical plasmas is
obtained by PIC models. These models rely on two building blocks:
coarse-graining, i.e., grouping of the order of p~10^10 real particles into a
single computer superparticle, and field storage on a grid with its subsequent
finite superparticle size. We introduce the notion of coarse-graining dependent
quantities, i.e., quantities depending on p. They derive from the PIC plasma
parameter Lambda^{PIC}, which we show to scale as 1/p. We explore two
implications. One is that PIC collision- and fluctuation-induced thermalization
times are expected to scale with the number of superparticles per grid cell,
and thus to be a factor p~10^10 smaller than in real plasmas. The other is that
the level of electric field fluctuations scales as 1/Lambda^{PIC} ~ p. We
provide a corresponding exact expression.
Fourth, we compare the Vlasov-Maxwell theory, which describes a phase-space
fluid with infinite Lambda, to the PIC model and its relatively small Lambda.
[8]
oai:arXiv.org:0912.2496 [pdf] - 31701
Supersonically Turbulent, Shock Bound Interaction Zones
Submitted: 2009-12-13
Shock bound interaction zones (SBIZs) are ubiquitous in astrophysics. We
present numerical results for 2D and 3D, plane-parallel, infinitely extended
SBIZs. Isothermal settings and parameterized cooling are considered. We
highlight and compare characteristic of such zones. We emphasize the mutual
coupling between the turbulence within the SBIZ and the confining shocks, point
out potential differences to 3D periodic box studies of supersonic turbulence,
and contemplate on possible effects on the X-ray emission of such zones.
[9]
oai:arXiv.org:0912.2498 [pdf] - 31702
Recurrent Novae: Progenitors of SN Ia?
Submitted: 2009-12-13
We present 3D hydrodynamical simulations of the separated binary RS Ophiuchi
(RS Oph), a recurrent nova and potential progenitor of a SN Ia. RS Oph is
composed of a red giant (RG) and a white dwarf (WD) whose mass is close to the
Chandrasekhar limit. In an isothermal scenario, the WD accrets about 10% of a
20 km/s RG wind by a non-Keplerian accretion disk with strong spiral shocks,
and about 2% of a 60 km/s RG wind by what we term a 'turbulent accretion ball'.
A significantly larger impact have the thermodynamics. In an adiabatic scenario
only about 0.7% of the 20 km/s RG wind is accreted. The rate of change of the
system separation due to mass and angular momentum loss out of the system is
negative in all three cases studied, but is ten times smaller for a fast RG
wind (60 km/s) than for a slow RG wind (20 km/s). The results demonstrate that
existing nova models and observed recurrence times fit well together with 3D
wind accretion and that RS Oph is one of the most promising systems to become
an SN Ia.