We report on the first detection of very high-energy (VHE) gamma-ray emission from the Crab Nebula by a Cherenkov telescope in dual-mirror Schwarzschild-Couder (SC) configuration. The result has been achieved by means of the 4 m size ASTRI-Horn telescope, operated on Mt. Etna (Italy) and developed in the context of the Cherenkov Telescope Array Observatory preparatory phase. The dual-mirror SC design is aplanatic and characterized by a small plate scale, allowing us to implement large field of view cameras with small-size pixel sensors and a high compactness. The curved focal plane of the ASTRI camera is covered by silicon photo-multipliers (SiPMs), managed by an unconventional front-end electronics based on a customized peak-sensing detector mode. The system includes internal and external calibration systems, hardware and software for control and acquisition, and the complete data archiving and processing chain. The observations of the Crab Nebula were carried out in December 2018, during the telescope verification phase, for a total observation time (after data selection) of 24.4 h, equally divided into on- and off-axis source exposure. The camera system was still under commissioning and its functionality was not yet completely exploited. Furthermore, due to recent eruptions of the Etna Volcano, the mirror reflection efficiency was reduced. Nevertheless, the observations led to the detection of the source with a statistical significance of 5.4 sigma above an energy threshold of ~3 TeV. This result provides an important step towards the use of dual-mirror systems in Cherenkov gamma-ray astronomy. A pathfinder mini-array based on nine large field-of-view ASTRI-like telescopes is under implementation.

Observations of circumstellar environments to look for the direct signal of exoplanets and the scattered light from disks has significant instrumental implications. In the past 15 years, major developments in adaptive optics, coronagraphy, optical manufacturing, wavefront sensing and data processing, together with a consistent global system analysis have enabled a new generation of high-contrast imagers and spectrographs on large ground-based telescopes with much better performance. One of the most productive is the Spectro-Polarimetic High contrast imager for Exoplanets REsearch (SPHERE) designed and built for the ESO Very Large Telescope (VLT) in Chile. SPHERE includes an extreme adaptive optics system, a highly stable common path interface, several types of coronagraphs and three science instruments. Two of them, the Integral Field Spectrograph (IFS) and the Infra-Red Dual-band Imager and Spectrograph (IRDIS), are designed to efficiently cover the near-infrared (NIR) range in a single observation for efficient young planet search. The third one, ZIMPOL, is designed for visible (VIR) polarimetric observation to look for the reflected light of exoplanets and the light scattered by debris disks. This suite of three science instruments enables to study circumstellar environments at unprecedented angular resolution both in the visible and the near-infrared. In this work, we present the complete instrument and its on-sky performance after 4 years of operations at the VLT.

In the last years we have operated two very similar ultrafast photon counting photometers (Iqueye and Aqueye+) on different telescopes. The absolute time accuracy in time tagging the detected photon with these instruments is of the order of 500 ps for hours of observation, allowing us to obtain, for example, the most accurate ever light curve in visible light of the optical pulsars. Recently we adapted the two photometers for working together on two telescopes at Asiago (Italy), for realizing an Hanbury-Brown and Twiss Intensity Interferometry like experiment with two 3.9 km distant telescopes. In this paper we report about the status of the activity and on the very preliminary results of our first attempt to measure the photon intensity correlation.

The nearby Herbig Be star HD100546 is known to be a laboratory for the study of protoplanets and their relation with the circumstellar disk that is carved by at least 2 gaps. We observed the HD100546 environment with high contrast imaging exploiting several different observing modes of SPHERE, including datasets with/without coronagraphs, dual band imaging, integral field spectroscopy and polarimetry. The picture emerging from these different data sets is complex. Flux-conservative algorithms images clearly show the disk up to 200au. More aggressive algorithms reveal several rings and warped arms overlapping the main disk. The bright parts of this ring lie at considerable height over the disk mid-plane at about 30au. Our images demonstrate that the brightest wings close to the star in the near side of the disk are a unique structure, corresponding to the outer edge of the intermediate disk at ~40au. Modeling of the scattered light from the disk with a geometrical algorithm reveals that a moderately thin structure can well reproduce the light distribution in the flux-conservative images. We suggest that the gap between 44 and 113 au span between the 1:2 and 3:2 resonance orbits of a massive body located at ~70au that might coincide with the candidate planet HD100546b detected with previous thermal IR observations. In this picture, the two wings can be the near side of a ring formed by disk material brought out of the disk at the 1:2 resonance with the same massive object. While we find no clear evidence confirming detection of the planet candidate HD100546c in our data, we find a diffuse emission close to the expected position of HD100546b. This source can be described as an extremely reddened substellar object surrounded by a dust cloud or its circumplanetary disk. Its astrometry is broadly consistent with a circular orbital motion on the disk plane.

SHARK-NIR is one of the two coronagraphic instruments proposed for the Large Binocular Telescope. Together with SHARK-VIS (performing coronagraphic imaging in the visible domain), it will offer the possibility to do binocular observations combining direct imaging, coronagraphic imaging and coronagraphic low resolution spectroscopy in a wide wavelength domain, going from 0.5{\mu}m to 1.7{\mu}m. Additionally, the contemporary usage of LMIRCam, the coronagraphic LBTI NIR camera, working from K to L band, will extend even more the covered wavelength range. In January 2017 SHARK-NIR underwent a successful final design review, which endorsed the instrument for construction and future implementation at LBT. We report here the final design of the instrument, which foresees two intermediate pupil planes and three focal planes to accomodate a certain number of coronagraphic techniques, selected to maximize the instrument contrast at various distances from the star. Exo-Planets search and characterization has been the science case driving the instrument design, but the SOUL upgrade of the LBT AO will increase the instrument performance in the faint end regime, allowing to do galactic (jets and disks) and extra-galactic (AGN and QSO) science on a relatively wide sample of targets, normally not reachable in other similar facilities.

HR2562 is an F5V star located at ~33 pc from the Sun hosting a substellar companion that was discovered using the GPI instrument. The main objective of the present paper is to provide an extensive characterisation of the substellar companion, by deriving its fundamental properties. We observed HR 2562 with the near-infrared branch (IFS and IRDIS) of SPHERE at the VLT. During our observations IFS was operating in the YJ band, while IRDIS was observing with the $H$ broad-band filter. The data were reduced with the dedicated SPHERE GTO pipeline, which is custom-designed for this instrument. On the reduced images, we then applied the post-processing procedures that are specifically prepared to subtract the speckle noise. The companion is clearly detected in both IRDIS and IFS datasets. We obtained photometry in three different spectral bands. The comparison with template spectra allowed us to derive a spectral type of T2-T3 for the companion. Using both evolutionary and atmospheric models we inferred the main physical parameters of the companion obtaining a mass of 32+/-14$~MJup, T_{eff}=1100+/-200 K and log(g)=4.75+/-0.41.

A large number of systems harboring a debris disk show evidence for a double belt architecture. One hypothesis for explaining the gap between the belts is the presence of one or more planets dynamically carving it. This work aims to investigate this scenario in systems harboring two components debris disks. All the targets in the sample were observed with the SPHERE instrument which performs high-contrast direct imaging. Positions of the inner and outer belts were estimated by SED fitting of the infrared excesses or, when available, from resolved images of the disk. Very few planets have been observed so far in debris disks gaps and we intended to test if such non-detections depend on the observational limits of the present instruments. This aim is achieved by deriving theoretical predictions of masses, eccentricities and semi-major axes of planets able to open the observed gaps and comparing such parameters with detection limits obtained with SPHERE. The relation between the gap and the planet is due to the chaotic zone around the orbit of the planet. The radial extent of this zone depends on the mass ratio between the planet and the star, on the semi-major axis and on the eccentricity of the planet and it can be estimated analytically. We apply the formalism to the case of one planet on a circular or eccentric orbit. We then consider multi-planetary systems: 2 and 3 equal-mass planets on circular orbits and 2 equal-mass planets on eccentric orbits in a packed configuration. We then compare each couple of values (M,a), derived from the dynamical analysis of single and multiple planetary models, with the detection limits obtained with SPHERE. Our results show that the apparent lack of planets in gaps between double belts could be explained by the presence of a system of two or more planets possibly of low mass and on an eccentric orbits whose sizes are below the present detection limits.

In this paper we present the results of the SPHERE observation of the HD 284149 system, aimed at a more detailed characterisation of both the primary and its brown dwarf companion. We observed HD 284149 in the near-infrared with SPHERE, using the imaging mode (IRDIS+IFS) and the long-slit spectroscopy mode (IRDIS-LSS). The data were reduced using the dedicated SPHERE pipeline, and algorithms such as PCA and TLOCI were applied to reduce the speckle pattern. The IFS images revealed a previously unknown low-mass (~0.16$M_{\odot}$) stellar companion (HD 294149 B) at ~0.1$^{\prime\prime}$, compatible with previously observed radial velocity differences, as well as proper motion differences between Gaia and Tycho-2 measurements. The known brown dwarf companion (HD 284149 b) is clearly visible in the IRDIS images. This allowed us to refine both its photometry and astrometry. The analysis of the medium resolution IRDIS long slit spectra also allowed a refinement of temperature and spectral type estimates. A full reassessment of the age and distance of the system was also performed, leading to more precise values of both mass and semi-major axis. As a result of this study, HD 284149 ABb therefore becomes the latest addition to the (short) list of brown dwarfs on wide circumbinary orbits, providing new evidence to support recent claims that object in such configuration occur with a similar frequency to wide companions to single stars.

The recent discovery of an earth-like planet around Proxima Centauri has drawn much attention to this star and its environment. We performed a series of observations of Proxima Centauri using SPHERE, the planet finder instrument installed at the ESO Very Large Telescope UT3, using its near infrared modules, IRDIS and IFS. No planet was directly detected but we set upper limits on the mass up to 7 au exploiting the AMES-COND models. Our IFS observations reveal that no planet more massive than ~6-7 M Jup can be present within 1 au. The dual band imaging camera IRDIS also enables us to probe larger separations than the other techniques like the radial velocity or astrometry. We obtained mass limits of the order of 4 M Jup at separations of 2 au or larger representing the most stringent mass limits at separations larger than 5 au available at the moment. We also did an attempt to estimate the radius of possible planets around Proxima using the reflected light. Since the residual noise for this observations are dominated by photon noise and thermal background, longer exposures in good observing conditions could further improve the achievable contrast limit.

Since a number of years our group is engaged in the design, construction and operation of instruments with very high time resolution in the optical band for applications to Quantum Astronomy and more conventional Astrophysics. Two instruments were built to perform photon counting with sub-nanosecond temporal accuracy. The first of the two, Aqueye+, is regularly mounted at the 1.8 m Copernicus telescope in Asiago, while the second one, Iqueye, was mounted at the ESO New Technology Telescope in Chile, and at the William Herschel Telescope and Telescopio Nazionale Galileo on the Roque (La Palma, Canary Islands). Both instruments deliver extraordinarily accurate results in optical pulsar timing. Recently, Iqueye was moved to Asiago to be mounted at the 1.2 m Galileo telescope to attempt, for the first time ever, experiments of optical intensity interferometry (a` la Hanbury Brown and Twiss) on a baseline of a few kilometers, together with the Copernicus telescope. This application was one of the original goals for the development of our instrumentation. To carry out these measurements, we are experimenting a new way of coupling the instruments to the telescopes, by means of moderate-aperture, low-optical-attenuation multi-mode optical fibers with a double-clad design. Fibers are housed in dedicated optical interfaces attached to the focus of another instrument of the 1.8 m telescope (Aqueye+) or to the Nasmyth focus of the 1.2 m telescope (Iqueye). This soft-mount solution has the advantage to facilitate the mounting of the photon counters, to keep them under controlled temperature and humidity conditions (reducing potential systematics related to varying ambient conditions), and to mitigate scheduling requirements. Here we will describe the first successful implementation of the Asiago intensity interferometer and future plans for improving it.

Cherenkov Telescopes are equipped with optical dishes of large diameter -- in general based on segmented mirrors -- with typical angular resolution of a few arc-minutes. To evaluate the mirror's quality specific metrological systems are required that possibly take into account the environmental conditions in which typically these telescopes operate (in open air without dome protection). For this purpose a new facility for the characterization of mirrors has been developed at the labs of the Osservatorio Astronomico di Brera of the Italian National Institute of Astrophysics. The facility allows the precise measurement of the radius of curvature and the distribution of the concentred light in terms of focused and scattered components and it works in open air. In this paper we describe the facility and report some examples of its measuring capabilities.

Aqueye+ is a new ultrafast optical single photon counter, based on single photon avalanche photodiodes (SPAD) and a 4-fold split-pupil concept. It is a completely revisited version of its predecessor, Aqueye, successfully mounted at the 182 cm Copernicus telescope in Asiago. Here we will present the new technological features implemented on Aqueye+, namely a state of the art timing system, a dedicated and optimized optical train, a high sensitivity and high frame rate field camera and remote control, which will give Aqueye plus much superior performances with respect to its predecessor, unparalleled by any other existing fast photometer. The instrument will host also an optical vorticity module to achieve high performance astronomical coronography and a real time acquisition of atmospheric seeing unit. The present paper describes the instrument and its first performances.

A highly and rapidly variable bipolar mass outflow from StHa 190 has been discovered, the first time in a yellow symbiotic star. Permitted emission lines are flanked by symmetrical jet features and multi-component P-Cyg profiles, with velocities up to 300 km/sec. Given the high orbital inclination of the binary, if the jets leave the system nearly perpendicular to the orbital plane, the de-projected velocity equals or exceeds the escape velocity (1000 km/sec). StHa190 looks quite peculiar in many other respects: the hot component is an O-type sub-dwarf without an accretion disk or a veiling nebular continuum and the cool component is a G7 III star rotating at a spectacular 105 km/sec unseen by a large margin in field G giants.

We present an analysis of high dispersion spectra (R~40000) of three red clump stars in the old open cluster NGC 6819. The spectra were obtained with SARG, the high dispersion spectrograph of the Telescopio Nazionale Galileo. The spectra were analyzed using both equivalent widths measured with an automatic procedure, and comparisons with synthetic spectra. NGC 6819 is found to be slightly metal-rich ([Fe/H]= +0.09 +/-0.03, internal error); there are no previous high resolution studies to compare with. Most element-to-element abundance ratios are close to solar; we find a slight excess of Si, and a significant Na overabundance. Our spectra can also be used to derive the interstellar reddening towards the cluster, by comparing the observed colours with those expected from line excitation: we derive E(B-V)=0.14 +/-0.04, in agreement with the most recent estimate for this cluster.