We present new observations of the active star-formation region NGC 1333 in the Perseus molecular cloud complex from the James Clerk Maxwell Telescope (JCMT) B-Fields In Star-forming Region Observations (BISTRO) survey with the POL-2 instrument. The BISTRO data cover the entire NGC 1333 complex (~ 1.5 pc x 2 pc) at 0.02 pc resolution and spatially resolve the polarized emission from individual filamentary structures for the first time. The inferred magnetic field structure is complex as a whole, with each individual filament aligned at different position angles relative to the local field orientation. We combine the BISTRO data with low- and high- resolution data derived from Planck and interferometers to study the multi-scale magnetic field structure in this region. The magnetic field morphology drastically changes below a scale of ~ 1 pc and remains continuous from the scales of filaments (~ 0.1 pc) to that of protostellar envelopes (~ 0.005 pc or ~ 1000 au). Finally, we construct simple models in which we assume that the magnetic field is always perpendicular to the long axis of the filaments. We demonstrate that the observed variation of the relative orientation between the filament axes and the magnetic field angles are well reproduced by this model, taking into account the projection effects of the magnetic field and filaments relative to the plane of the sky. These projection effects may explain the apparent complexity of the magnetic field structure observed at the resolution of BISTRO data towards the filament network.

Field's linear analysis of thermal instability is repeated using methods related to Whitham's theory of wave hierarchies, which brings out the physically relevant parameters in a much clearer way than in the original analysis. It is also used for the stability of non-equilibrium states and we show that for gas cooling behind a shock, the usual analysis is only quantitatively valid for shocks that are just able to trigger a transition to the cold phase. A magnetic field can readily be included and we show that this does not change the stability criteria. By considering steady shock solutions, we show that almost all plausible initial conditions lead to a magnetically dominated state on the unstable part of the equilibrium curve. These results are used to analyse numerical calculations of perturbed steady shock solutions and of shocks interacting with a warm cloud.

We present the POL-2 850 $\mu$m linear polarization map of the Barnard 1 clump in the Perseus molecular cloud complex from the B-fields In STar-forming Region Observations (BISTRO) survey at the James Clerk Maxwell Telescope. We find a trend of decreasing polarization fraction as a function of total intensity, which we link to depolarization effects towards higher density regions of the cloud. We then use the polarization data at 850 $\mu$m to infer the plane-of-sky orientation of the large-scale magnetic field in Barnard 1. This magnetic field runs North-South across most of the cloud, with the exception of B1-c where it turns more East-West. From the dispersion of polarization angles, we calculate a turbulence correlation length of $5.0 \pm 2.5$ arcsec ($1500$ au), and a turbulent-to-total magnetic energy ratio of $0.5 \pm 0.3$ inside the cloud. We combine this turbulent-to-total magnetic energy ratio with observations of NH$_3$ molecular lines from the Green Bank Ammonia Survey (GAS) to estimate the strength of the plane-of-sky component of the magnetic field through the Davis-Chandrasekhar-Fermi method. With a plane-of-sky amplitude of $120 \pm 60$ $\mu$G and a criticality criterion $\lambda_c = 3.0 \pm 1.5$, we find that Barnard 1 is a supercritical molecular cloud with a magnetic field nearly dominated by its turbulent component.

We present the 850 $\mu$m polarization observations toward the IC5146 filamentary cloud taken using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) and its associated polarimeter (POL-2), mounted on the James Clerk Maxwell Telescope (JCMT), as part of the B-fields In STar forming Regions Observations (BISTRO). This work is aimed at revealing the magnetic field morphology within a core-scale ($\lesssim 1.0$ pc) hub-filament structure (HFS) located at the end of a parsec-scale filament. To investigate whether or not the observed polarization traces the magnetic field in the HFS, we analyze the dependence between the observed polarization fraction and total intensity using a Bayesian approach with the polarization fraction described by the Rice likelihood function, which can correctly describe the probability density function (PDF) of the observed polarization fraction for low signal-to-noise ratio (SNR) data. We find a power-law dependence between the polarization fraction and total intensity with an index of 0.56 in $A_V\sim$ 20--300 mag regions, suggesting that the dust grains in these dense regions can still be aligned with magnetic fields in the IC5146 regions. Our polarization maps reveal a curved magnetic field, possibly dragged by the contraction along the parsec-scale filament. We further obtain a magnetic field strength of 0.5$\pm$0.2 mG toward the central hub using the Davis-Chandrasekhar-Fermi method, corresponding to a mass-to-flux criticality of $\sim$ $1.3\pm0.4$ and an Alfv\'{e}nic Mach number of $<$0.6. These results suggest that gravity and magnetic field is currently of comparable importance in the HFS, and turbulence is less important.

This paper describes 3D simulations of the formation of collapsing cold clumps via thermal instability inside a larger cloud complex. The initial condition was a diffuse atomic, stationary, thermally unstable, 200pc diameter spherical cloud in pressure equilibrium with low density surroundings. This was seeded with 10% density perturbations at the finest initial grid level (0.29pc) around n_H = 1.1cm^{-3} and evolved with self-gravity included. No magnetic field was imposed. Resimulations at a higher resolution of a region extracted from this simulation (down to 0.039pc), show that the thermal instability forms sheets, then filaments and finally clumps. The width of the filaments increases over time, in one particular case from 0.26 to 0.56pc. Thereafter clumps with sizes of around 5pc grow at the intersections of filaments. 21 distinct clumps, with properties similar to those observed in molecular clouds, are found by using the FellWalker algorithm to find minima in the gravitational potential. Not all of these are gravitationally bound, but the convergent nature of the flow and increasing central density suggest they are likely to form stars. Further simulation of the most massive clump shows the gravitational collapse to a density >10^6 cm^{-3}. These results provide realistic initial conditions that can be used to study feedback in individual clumps, interacting clumps and the entire molecular cloud complex.

We report 850~$\mu$m dust polarization observations of a low-mass ($\sim$12 $M_{\odot}$) starless core in the $\rho$ Ophiuchus cloud, Ophiuchus C, made with the POL-2 instrument on the James Clerk Maxwell Telescope (JCMT) as part of the JCMT B-fields In STar-forming Region Observations (BISTRO) survey. We detect an ordered magnetic field projected on the plane of sky in the starless core. The magnetic field across the $\sim$0.1~pc core shows a predominant northeast-southwest orientation centering between $\sim$40$^\circ$ to $\sim$100$^\circ$, indicating that the field in the core is well aligned with the magnetic field in lower-density regions of the cloud probed by near-infrared observations and also the cloud-scale magnetic field traced by Planck observations. The polarization percentage ($P$) decreases with an increasing total intensity ($I$) with a power-law index of $-$1.03 $\pm$ 0.05. We estimate the plane-of-sky field strength ($B_{\mathrm{pos}}$) using modified Davis-Chandrasekhar-Fermi (DCF) methods based on structure function (SF), auto-correlation (ACF), and unsharp masking (UM) analyses. We find that the estimates from the SF, ACF, and UM methods yield strengths of 103 $\pm$ 46 $\mu$G, 136 $\pm$ 69 $\mu$G, and 213 $\pm$ 115 $\mu$G, respectively. Our calculations suggest that the Ophiuchus C core is near magnetically critical or slightly magnetically supercritical (i.e. unstable to collapse). The total magnetic energy calculated from the SF method is comparable to the turbulent energy in Ophiuchus C, while the ACF method and the UM method only set upper limits for the total magnetic energy because of large uncertainties.

We present the results of dust emission polarization measurements of Ophiuchus-B (Oph-B) carried out using the Submillimetre Common-User Bolometer Array 2 (SCUBA-2) camera with its associated polarimeter (POL-2) on the James Clerk Maxwell Telescope (JCMT) in Hawaii. This work is part of the B-fields In Star-forming Region Observations (BISTRO) survey initiated to understand the role of magnetic fields in star formation for nearby star-forming molecular clouds. We present a first look at the geometry and strength of magnetic fields in Oph-B. The field geometry is traced over $\sim$0.2 pc, with clear detection of both of the sub-clumps of Oph-B. The field pattern appears significantly disordered in sub-clump Oph-B1. The field geometry in Oph-B2 is more ordered, with a tendency to be along the major axis of the clump, parallel to the filamentary structure within which it lies. The degree of polarization decreases systematically towards the dense core material in the two sub-clumps. The field lines in the lower density material along the periphery are smoothly joined to the large scale magnetic fields probed by NIR polarization observations. We estimated a magnetic field strength of 630$\pm$410 $\mu$G in the Oph-B2 sub-clump using a Davis-Chandeasekhar-Fermi analysis. With this magnetic field strength, we find a mass-to-flux ratio $\lambda$= 1.6$\pm$1.1, which suggests that the Oph-B2 clump is slightly magnetically supercritical.

We present 850 $\mu$m imaging polarimetry data of the $\rho$ Oph-A core taken with the Submillimeter Common-User Bolometer Array-2 (SCUBA-2) and its polarimeter (POL-2), as part of our ongoing survey project, BISTRO (B-fields In STar forming RegiOns). The polarization vectors are used to identify the orientation of the magnetic field projected on the plane of the sky at a resolution of 0.01 pc. We identify 10 subregions with distinct polarization fractions and angles in the 0.2 pc $\rho$ Oph A core; some of them can be part of a coherent magnetic field structure in the $\rho$ Oph region. The results are consistent with previous observations of the brightest regions of $\rho$ Oph-A, where the degrees of polarization are at a level of a few percents, but our data reveal for the first time the magnetic field structures in the fainter regions surrounding the core where the degree of polarization is much higher ($> 5 \%$). A comparison with previous near-infrared polarimetric data shows that there are several magnetic field components which are consistent at near-infrared and submillimeter wavelengths. Using the Davis-Chandrasekhar-Fermi method, we also derive magnetic field strengths in several sub-core regions, which range from approximately 0.2 to 5 mG. We also find a correlation between the magnetic field orientations projected on the sky with the core centroid velocity components.

The famous Rosette Nebula has an evacuated central cavity formed from the stellar winds ejected from the 2-6 million-year-old co-distant and co-moving central star cluster NGC 2244. However, with upper age estimates of less than 110,000 years, the central cavity is too young compared to NGC 2244 and existing models do not reproduce its properties. A new proper motion study herein using Gaia data reveals the ejection of the most massive star in the Rosette, HD46223, from NGC 2244 occurred 1.73 (+0.34,-0.25)Myr (1$\sigma$ uncertainty) in the past. Assuming this ejection was at the birth of the most massive stars in NGC 2244, including the dominant centrally positioned HD46150, the age is set for the famous ionised region at more than ten times that derived for the cavity. Here, we are able to reproduce the structure of the Rosette Nebula, through simulation of mechanical stellar feedback from a 40M$_{\odot}$ star in a thin sheet-like molecular cloud. We form the 135,000M$_{\odot}$ cloud from thermally-unstable diffuse interstellar medium under the influence of a realistic background magnetic field with thermal/magnetic pressure equilibrium. Properties derived from a snapshot of the simulation at 1.5Myr, including cavity size, stellar age, magnetic field and resulting inclination to the line of sight, match those derived from observations. An elegant explanation is thus provided for the stark contrast in age estimates based on realistic diffuse ISM properties, molecular cloud formation and stellar wind feedback.

We have used the AMR hydrodynamic code, MG, to perform 3D hydrodynamic simulations with self-gravity of stellar feedback in a spherical clumpy molecular cloud formed through the action of thermal instability. We simulate the interaction of the mechanical energy input from 15 Msun, 40 Msun, 60 Msun and 120 Msun stars into a 100 pc-diameter 16,500 Msun cloud with a roughly spherical morphology with randomly distributed high density condensations. The stellar winds are introduced using appropriate non-rotating Geneva stellar evolution models. In the 15 Msun star case, the wind has very little effect, spreading around a few neighbouring clumps before becoming overwhelmed by the cloud collapse. In contrast, in the 40 Msun, 60 Msun and 120 Msun star cases, the more powerful stellar winds create large cavities and carve channels through the cloud, breaking out into the surrounding tenuous medium during the wind phase and considerably altering the cloud structure. After 4.97 Myrs, 3.97 Myrs and 3.01 Myrs respectively, the massive stars explode as supernovae (SNe). The wind-sculpted surroundings considerably affect the evolution of these SN events as they both escape the cloud along wind-carved channels and sweep up remaining clumps of cloud/wind material. The `cloud' as a coherent structure does not survive the SN from any of these stars, but only in the 120 Msun case is the cold molecular material completely destabilised and returned to the unstable thermal phase. In the 40 Msun and 60 Msun cases, coherent clumps of cold material are ejected from the cloud by the SN, potentially capable of further star formation.

We present the first results from the B-fields In STar-forming Region Observations (BISTRO) survey, using the Sub-millimetre Common-User Bolometer Array 2 (SCUBA-2) camera, with its associated polarimeter (POL-2), on the James Clerk Maxwell Telescope (JCMT) in Hawaii. We discuss the survey's aims and objectives. We describe the rationale behind the survey, and the questions which the survey will aim to answer. The most important of these is the role of magnetic fields in the star formation process on the scale of individual filaments and cores in dense regions. We describe the data acquisition and reduction processes for POL-2, demonstrating both repeatability and consistency with previous data. We present a first-look analysis of the first results from the BISTRO survey in the OMC 1 region. We see that the magnetic field lies approximately perpendicular to the famous 'integral filament' in the densest regions of that filament. Furthermore, we see an 'hour-glass' magnetic field morphology extending beyond the densest region of the integral filament into the less-dense surrounding material, and discuss possible causes for this. We also discuss the more complex morphology seen along the Orion Bar region. We examine the morphology of the field along the lower-density north-eastern filament. We find consistency with previous theoretical models that predict magnetic fields lying parallel to low-density, non-self-gravitating filaments, and perpendicular to higher-density, self-gravitating filaments.

We describe the results of 3D simulations of the interaction of hydrodynamic shocks with Bonnor-Ebert spheres performed with an Adaptive Mesh Refinement code. The calculations are isothermal and the clouds are embedded in a medium in which the sound speed is either four or ten times that in the cloud. The strengths of the shocks are such that they induce gravitational collapse in some cases and not in others and we derive a simple estimate for the shock strength required for this to occur. These results are relevant to dense cores and Bok globules in star forming regions subjected to shocks produced by stellar feedback.

We have used the AMR hydrodynamic code, MG, to perform 3D magnetohydrodynamic simulations with self-gravity of stellar feedback in a sheet-like molecular cloud formed through the action of the thermal instability. We simulate the interaction of the mechanical energy input from a 15 solar mass star and a 40 solar mass star into a 100 pc-diameter 17000 solar mass cloud with a corrugated sheet morphology that in projection appears filamentary. The stellar winds are introduced using appropriate Geneva stellar evolution models. In the 15 solar mass star case, the wind forms a narrow bipolar cavity with minimal effect on the parent cloud. In the 40 solar mass star case, the more powerful stellar wind creates a large cylindrical cavity through the centre of the cloud. After 12.5 Myrs and 4.97 Myrs respectively, the massive stars explode as supernovae (SNe). In the 15 solar mass star case, the SN material and energy is primarily deposited into the molecular cloud surroundings over ~10^5 years before the SN remnant escapes the cloud. In the 40 solar mass star case, a significant fraction of the SN material and energy rapidly escapes the molecular cloud along the wind cavity in a few tens of kiloyears. Both SN events compress the molecular cloud material around them to higher densities (so may trigger further star formation), and strengthen the magnetic field, typically by factors of 2-3 but up to a factor of 10. Our simulations are relevant to observations of bubbles in flattened ring-like molecular clouds and bipolar HII regions.

We numerically reproduce the density profiles for filaments that are in magnetohydrostatic and pressure equilibrium with their surroundings obtained in Tomisaka (2014) and show that these equilibria are dynamically stable. If the effect of ambipolar diffusion is considered, these filaments lose magnetic support initiating cloud collapse. The filaments do not lose magnetic flux. Rather the magnetic flux is redistributed within the filament from the centre towards the envelope. The rate of the collapse is inversely proportional to the fractional ionisation and two gravitationally-driven ambipolar diffusion regimes for the collapse are observed as predicted in Mouschovias & Morton (1991). For high values of the ionisation coefficient, that is $X \geq 10^{-7}$, the gas is strongly coupled to the magnetic field and the Jeans length is larger than the ambipolar diffusion length scale. Then the collapse is governed by magnetically-regulated ambipolar diffusion. For $X \lesssim 10^{-8}$, the gas is weakly coupled to the magnetic field and the magnetic support is removed by gravitationally-dominated ambipolar diffusion. Here, neutrals and ions only collide sporadically, that is the ambipolar diffusion length scale is larger than the Jeans length. When decaying turbulence is included, additional support is provided to the filament. This slows down the collapse of the filament even in the absence of a magnetic field. When a magnetic field is present, the collapse rate increases by a ratio smaller than for the non-magnetic case. This is because of a speed-up of the ambipolar diffusion due to larger magnetic field gradients generated by the turbulence and because the ambipolar diffusion aids the dissipation of turbulence below the ambipolar diffusion length scale. The highest increase in the rate is observed for the lowest ionisation coefficient and the highest turbulent intensity.

We have used the AMR hydrodynamic code, MG, to perform idealised 3D MHD simulations of the formation of clumpy and filamentary structure in a thermally unstable medium without turbulence. A stationary thermally unstable spherical diffuse atomic cloud with uniform density in pressure equilibrium with low density surroundings was seeded with random density variations and allowed to evolve. A range of magnetic field strengths threading the cloud have been explored, from beta=0.1 to beta=1.0 to the zero magnetic field case (beta=infinity), where beta is the ratio of thermal pressure to magnetic pressure. Once the density inhomogeneities had developed to the point where gravity started to become important, self-gravity was introduced to the simulation. With no magnetic field, clouds and clumps form within the cloud with aspect ratios of around unity, whereas in the presence of a relatively strong field (beta=0.1) these become filaments, then evolve into interconnected corrugated sheets that are predominantly perpendicular to the magnetic field. With magnetic and thermal pressure equality (beta=1.0), filaments, clouds and clumps are formed. At any particular instant, the projection of the 3D structure onto a plane parallel to the magnetic field, i.e. a line of sight perpendicular to the magnetic field, resembles the appearance of filamentary molecular clouds. The filament densities, widths, velocity dispersions and temperatures resemble those observed in molecular clouds. In contrast, in the strong field case beta=0.1, projection of the 3D structure along a line of sight parallel to the magnetic field reveals a remarkably uniform structure.

The regulation of galactic-scale star formation rates (SFRs) is a basic problem for theories of galaxy formation and evolution: which processes are responsible for making observed star formation rates so inefficient compared to maximal rates of gas content divided by dynamical timescale? Here we study the effect of magnetic fields of different strengths on the evolution of giant molecular clouds (GMCs) within a kiloparsec patch of a disk galaxy and resolving scales down to $\simeq0.5\:{\rm{pc}}$. Including an empirically motivated prescription for star formation from dense gas ($n_{\rm{H}}>10^5\:{\rm{cm}^{-3}}$) at an efficiency of 2\% per local free-fall time, we derive the amount of suppression of star formation by magnetic fields compared to the nonmagnetized case. We find GMC fragmentation, dense clump formation and SFR can be significantly affected by the inclusion of magnetic fields, especially in our strongest investigated $B$-field case of $80\:{\rm{\mu}}$G. However, our chosen kpc-scale region, extracted from a global galaxy simulation, happens to contain a starbursting cloud complex that is only modestly affected by these magnetic fields and likely requires internal star formation feedback to regulate its SFR.

We present 2D adiabatic magnetohydrodynamic (MHD) simulations of a shock interacting with groups of two or three cylindrical clouds. We study how the presence of a nearby cloud influences the dynamics of this interaction, and explore the resulting differences and similarities in the evolution of each cloud. The understanding gained from this small-scale study will help to interpret the behaviour of systems with many 10's or 100's of clouds. We observe a wide variety of behaviour in the interactions studied, which is dependent on the initial positions of the clouds and the orientation and strength of the magnetic field. We find: i) some clouds are stretched along their field-lines, whereas others are confined by their field-lines; ii) upstream clouds may accelerate past downstream clouds (though magnetic tension can prevent this); iii) clouds may also change their relative positions transverse to the direction of shock propagation as they "slingshot" past each other; iv) downstream clouds may be offered some protection from the oncoming flow as a result of being in the lee of an upstream cloud; v) the cycle of cloud compression and re-expansion is generally weaker when there are nearby neighbouring clouds; vi) the plasma $\beta$ in cloud material can vary rapidly as clouds collide with one another, but low values of $\beta$ are always transitory. This work is relevant to studies of multi-phase regions, where fast, low-density gas interacts with dense clouds, such as in circumstellar bubbles, supernova remnants, superbubbles and galactic winds.

We perform three dimensional hydrodynamic simulations of the ram pressure stripping of the hot extended gaseous halo of a massive galaxy using the k-epsilon sub-grid turbulence model at Mach numbers 0.9, 1.1 and 1.9. The k-epsilon model is used to simulate high Reynolds number flows by increasing the transport coefficients in regions of high turbulence. We find that the initial, instantaneous stripping is the same whether or not the k-epsilon model is implemented and is in agreement with the results of other studies. However the use of the k-epsilon model leads to five times less gas remaining after stripping by a supersonic flow has proceeded for 10 Gyr, which is more consistent with what simple analytic calculations indicate. Hence the continual Kelvin-Helmholtz stripping plays a significant role in the ram pressure stripping of the haloes of massive galaxies. To properly account for this, simulations of galaxy clusters will require the use of sub-grid turbulence models

An ideal magnetohydrodynamics (MHD) code with adaptive mesh refinement (AMR) was used to investigate the interactions of fast-mode shocks with self-gravitating, isothermal cores with mass-to-flux ratios that are somewhat below the minimum value required for gravitational collapse. We find that shock focussing produces colliding flows along the field lines that generate very high densities, even for relatively weak shocks. Self-gravity plays only a minor role in determining the highest density that is reached, but it does play a role in the subsequent evolution. The densities at comparable times differ by a factor of a few for shocks initially propagating perpendicularly or obliquely to the magnetic field in the ambient medium.

We compare the results for a set of hydrodynamical tests performed with the AMR finite volume code, MG and the SPH code, SEREN. The test suite includes shock tube tests, with and without cooling, the non-linear thin-shell instability and the Kelvin-Helmholtz instability. The main conclusions are : (i) the two methods converge in the limit of high resolution and accuracy in most cases. All tests show good agreement when numerical effects (e.g. discontinuities in SPH) are properly treated. (ii) Both methods can capture adiabatic shocks and well-resolved cooling shocks perfectly well with standard prescriptions. However, they both have problems when dealing with under-resolved cooling shocks, or strictly isothermal shocks, at high Mach numbers. The finite volume code only works well at 1st order and even then requires some additional artificial viscosity. SPH requires either a larger value of the artificial viscosity parameter, alpha_AV, or a modified form of the standard artificial viscosity term using the harmonic mean of the density, rather than the arithmetic mean. (iii) Some SPH simulations require larger kernels to increase neighbour number and reduce particle noise in order to achieve agreement with finite volume simulations. However, this is partly due to the need to reduce noise that can corrupt the growth of small-scale perturbations. In contrast, instabilities seeded from large-scale perturbations do not require more neighbours and hence work well with standard SPH formulations and converge with the finite volume simulations. (iv) For purely hydrodynamical problems, SPH simulations take an order of magnitude longer to run than finite volume simulations when running at equivalent resolutions, i.e. when they both resolve the underlying physics to the same degree. This requires about 2-3 times as many particles as the number of cells.

We present simulations of the evolution of self-gravitating dense gas on kiloparsec-size scales in a galactic disk, designed to study dense clump formation from giant molecular clouds (GMCs). These dense clumps are expected to be the precursors to star clusters and this process may be the rate limiting step controling star formation rates in galactic systems as described by the Kennicutt-Schmidt relation. The evolution of these simulated GMCs and clumps is determined by self-gravity balanced by turbulent pressure support and the large scale galactic shear. While the cloud structures and densities significantly change during their evolution, they remain roughly in virial equilibrium for time scales exceeding the free-fall time of GMCs, indicating that energy from the galactic shear continuously cascades down. We implement star formation at a slow, inefficient rate of 2% per local free-fall time, but this yields global star formation rates that are more than ~two orders of magnitude larger than the observed Kennicutt-Schmidt relation due to the over-production of dense clump gas. To explain this discrepancy, we anticipate magnetic fields to provide additional support. Low-resolution simulations indeed show that the magnetic field reduces the star formation rate.

We present the first results for the sputtering of grain mantles and cores obtained with self-consistent multifluid hydromagnetic models of C-type shocks propagating through dusty media. The threshold shock speed for mantle sputtering is about 10 km/s and is independent of density. The mantles are completely vapourised in shocks with speeds of 20-25 km/s. At such shock speeds core sputtering commences and gas-phase SiO forms. Core destruction is not total in any C-type shock because grains are not completely destroyed in shocks with speeds near the minimum speeds at which J-type shocks appear. Due to the density-dependence of the critical shock speed for this transition, higher gas-phase SiO fractional abundances are produced behind shocks propagating in lower density gas. For shock speeds near the threshold speeds for both core and mantle sputtering, sputtering is much greater for shock velocities at smaller angles relative to the upstream magnetic field. At higher shock speeds, the angular variation is still present but less pronounced.

Research performed in the 1950s and 1960s by Leon Mestel on the roles of magnetic fields in star formation established the framework within which he and other key figures have conducted subsequent investigations on the subject. This short tribute to Leon contains a brief summary of some, but not all, of his ground breaking contributions in the area. It also mentions of some of the relevant problems that have received attention in the last few years. The coverage is not comprehensive, and the authors have drawn on their own results more and touched more briefly on those of others than they would in a normal review. Theirs is a personal contribution to the issue honouring Leon, one of the truly great gentlemen, wits, and most insightful of astrophysicists.

We present numerical simulations of the adiabatic interaction of a shock with a clumpy region containing many individual clouds. Our work incorporates a sub-grid turbulence model which for the first time makes this investigation feasible. We vary the Mach number of the shock, the density contrast of the clouds, and the ratio of total cloud mass to inter-cloud mass within the clumpy region. Cloud material becomes incorporated into the flow. This "mass-loading" reduces the Mach number of the shock, and leads to the formation of a dense shell. In cases in which the mass-loading is sufficient the flow slows enough that the shock degenerates into a wave. The interaction evolves through up to four stages: initially the shock decelerates; then its speed is nearly constant; next the shock accelerates as it leaves the clumpy region; finally it moves at a constant speed close to its initial speed. Turbulence is generated in the post-shock flow as the shock sweeps through the clumpy region. Clouds exposed to turbulence can be destroyed more rapidly than a similar cloud in an "isolated" environment. The lifetime of a downstream cloud decreases with increasing cloud-to-intercloud mass ratio. We briefly discuss the significance of these results for starburst superwinds and galaxy evolution.

In the absence of magnetic fields and cosmic rays, radiative cooling laws with a range of dependences on temperature affect the stability of interstellar gas. For about four and a half decades, astrophysicists have recognised the importance of the thermal instablity for the formation of clouds in the interstellar medium. Even in the past several years, many papers have concerned the role of the thermal instability in the production of molecular clouds. About three and a half decades ago, astrophysicists investigating radiative shocks noticed that for many cooling laws such shocks are unstable. Attempts to address the effects of cosmic rays on the stablity of radiative media that are initially uniform or that have just passed through shocks have been made. The simplest approach to such studies involves the assumption that the cosmic rays behave as a fluid. Work based on such an approach is described. Cosmic rays have no effect on the stability of initially uniform, static media with respect to isobaric perturbations, though they do affect the stability of such media with respect to isentropic perturbations. The effect of cosmic rays on the stability of radiative shocked media depends greatly on the efficiency of the conversion of energy in accelerated cosmic rays into thermal energy in the thermalized fluid. If that efficiency is low, radiative cooling makes weak shocks propagating into upstream media with low cosmic-ray pressures more likely to be cosmic-ray dominated than adiabatic shocks of comparable strength. The cosmic-ray dominated shocks do not display radiative overstability. Highly efficient conversion of cosmic-ray energy into thermal energy leads shocked media to behave as they do when cosmic rays are absent.

To understand the formation of a magnetically dominated molecular cloud from an atomic cloud, we study the interaction of a weak, radiative shock with a magnetised cloud. The thermally stable warm atomic cloud is initially in static equilibrium with the surrounding hot ionised gas. A shock propagating through the hot medium then interacts with the cloud. We follow the dynamical evolution of the shocked cloud with a time-dependent ideal magnetohydrodynamic code. By performing the simulations in 3D, we investigate the effect of different magnetic field orientations including parallel, perpendicular and oblique to the shock normal. We find that the angle between the shock normal and the magnetic field must be small to produce clouds with properties similar to observed molecular clouds.

The turbulent destruction of a cloud subject to the passage of an adiabatic shock is studied. We find large discrepancies between the lifetime of the cloud and the analytical result of Hartquist et al. (1986). These differences appear to be due to the assumption in Hartquist et al. that mass-loss occurs largely as a result of lower pressure regions on the surface of the cloud away from the stagnation point, whereas in reality Kelvin-Helmholtz (KH) instabilities play a dominant role in the cloud destruction. We find that the true lifetime of the cloud (defined as when all of the material from the core of the cloud is well mixed with the intercloud material in the hydrodynamic cells) is about 6 times t_KHD, where t_KHD is the growth timescale for the most disruptive, long-wavelength, KH instabilities. These findings have wide implications for diffuse sources where there is transfer of material between hot and cool phases. The properties of the interaction as a function of Mach number and cloud density contrast are also studied. The interaction is milder at lower Mach numbers with the most marked differences occuring at low shock Mach numbers when the postshock gas is subsonic with respect to the cloud (i.e. M < 2.76). Material stripped off the cloud only forms a long "tail-like" feature if the density contrast of the cloud to the ambient medium, chi > 1e3.

Outflows of young stars drive shocks into dusty, molecular regions. Most models of such shocks assume that they are steady and propagating perpendicular to the magnetic field. Real shocks often violate both of these assumptions and the media through which they propagate are inhomogeneous. We use the code employed previously to produce the first time-dependent simulations of fast-mode, oblique C-type shocks interacting with density perturbations. We include a self-consistent calculation of the thermal and ionisation balances and a fluid treatment of grains. We identify features that develop when a multifluid shock encounters a density inhomogeneity to investigate whether any part of the precursor region ever behaves in a quasi-steady fashion. If it does the shock may be modelled approximately without solving the time-dependent hydromagnetic equations. Simulations were made for initially steady oblique C-type shocks encountering density inhomogeneities. For a semi-finite inhomogeneity with a density larger than the surrounding medium, a transmitted shock evolves from being J-type to a steady C-type shock on a timescale comparable to the ion-flow time through it. A sufficiently upstream part of the precursor of an evolving J-type shock is quasi-steady. The ion-flow timescale is also relevant for the evolution of a shock moving into a region of decreasing density. The models for shocks propagating into regions in which the density increases and then decreases to its initial value cannot be entirely described in terms of the results obtained for monotonically increasing and decreasing densities. For the latter model, the long-term evolution to a C-type shock cannot be approximated by quasi-steady models.

Using a time-dependent multifluid, magnetohydrodynamic code, we calculated the structure of steady perpendicular and oblique C-type shocks in dusty plasmas. We included relevant processes to describe mass transfer between the different fluids, radiative cooling by emission lines and grain charging and studied the effect of single-sized and multiple sized grains on the shock structure. Our models are the first of oblique fast-mode molecular shocks in which such a rigorous treatment of the dust grain dynamics has been combined with a self-consistent calculation of the thermal and ionisation structures including appropriate microphysics. At low densities the grains do not play any significant role in the shock dynamics. At high densities, the ionisation fraction is sufficiently low that dust grains are important charge and current carriers and, thus, determine the shock structure. We find that the magnetic field in the shock front has a significant rotation out of the initial upstream plane. This is most pronounced for single-sized grains and small angles of the shock normal with the magnetic field. Our results are similar to previous studies of steady C-type shocks showing that our method is efficient, rigorous and robust. Unlike the method employed in the previous most detailed treatment of dust in steady oblique fast-mode shocks, ours allows a reliable calculation even when chemical or other conditions deviate from local statistical equilibrium. We are also able to model transient phenomena.

In 1986 Alex Dalgarno published a paper entitled "Is Interstellar Chemistry Useful?" By the middle 1970s, and perhaps even earlier, Alex had hoped that astronomical molecules would prove to: possess significant diagnostic utility; control many of the environments in which they exist; stimulate a wide variety of physicists and chemists who are at least as fascinated by the mechanisms forming and removing the molecules as by astronomy. His own research efforts have contributed greatly to the realization of that hope. This paper contains a few examples of: how molecules are used to diagnose large-scale dynamics in astronomical sources including star forming regions and supernovae; the ways in which molecular processes control the evolution of astronomical objects such as dense cores destined to become stars and very evolved giant stars; theoretical and laboratory investigations that elucidate the processes producing and removing astronomical molecules and allow their detection.

We present a time-dependent cosmic-ray modified shock model for which the calculated H-alpha emissivity profile agrees well with the H-alpha flux increase ahead of the Balmer-dominated shock at knot g in Tycho's supernova remnant, observed by Lee et al (2007). The backreaction of the cosmic ray component on the thermal component is treated in the two-fluid approximation, and we include thermal particle injection and energy transfer due to the acoustic instability in the precursor. The transient state of our model that describes the current state of the shock at knot g, occurs during the evolution from a thermal gas dominated shock to a smooth cosmic-ray dominated shock. Assuming a distance of 2.3 kpc to Tycho's remnant we obtain values for the cosmic ray diffusion coefficient, the injection parameter, and the time scale for the energy transfer of 10^{24} cm^{2} s^{-1}, 4.2x10^{-3}, and 426 y, respectively. We have also studied the parameter space for fast (300 km s^{-1} - 3000 km s^{-1}), time-asymptotically steady shocks and have identified a branch of solutions, for which the temperature in the cosmic ray precursor typically reaches 2-6x10^{4} K and the bulk acceleration of the flow through the precursor is less than 10 km s^{-1}. These solutions fall into the low cosmic ray acceleration efficiency regime and are relatively insensitive to shock parameters. This low cosmic ray acceleration efficiency branch of solutions may provide a natural explanation for the line broadening of the H-alpha narrow component observed in non-radiative shocks in many supernova remnants.

The interaction of a shock with a cloud has been extensively studied in the literature, where the effects of magnetic fields, radiative cooling and thermal conduction have been considered. However, the formation of fully developed turbulence has often been prevented by the artificial viscosity inherent in hydrodynamical simulations, and a uniform post-shock flow has been assumed in all previous single-cloud studies. In reality, the flow behind the shock is also likely to be turbulent, with non-uniform density, pressure and velocity structure created as the shock sweeps over inhomogenities upstream of the cloud. To address these twin issues we use a sub-grid compressible k-epsilon turbulence model to estimate the properties of the turbulence generated in shock-cloud interactions and the resulting increase in the transport coefficients that the turbulence brings. A detailed comparison with the output from an inviscid hydrodynamical code puts these new results into context. We find that cloud destruction in inviscid and k-epsilon models occurs at roughly the same speed when the post-shock flow is smooth and when the density contrast between the cloud and inter-cloud medium is less than 100. However, there are increasing and significant differences as this contrast increases. Clouds subjected to strong ``buffeting'' by a highly turbulent post-shock environment are destroyed significantly quicker. Additional calculations with an inviscid code where the post-shock flow is given random, grid-scale, motions confirms the more rapid destruction of the cloud. Our results clearly show that turbulence plays an important role in shock-cloud interactions, and that environmental turbulence adds a new dimension to the parameter space which has hitherto been studied (abridged).

Outflows of pre-main-sequence stars drive shocks into molecular material within 0.01 - 1 pc of the young stars. The shock-heated gas emits infrared, millimeter and submillimeter lines of many species including. Dust grains are important charge carriers and play a large role in coupling the magnetic field and flow of neutral gas. Some effects of the dust on the dynamics of oblique shocks began to emerge in the 1990s. However, detailed models of these shocks are required for the calculation of the grain sputtering contribution to gas phase abundances of species producing observed emissions. We are developing such models. Some of the molecular species introduced into the gas phase by sputtering in shocks or by thermally driven desorption in hot cores form on grain surfaces. Recently laboratory studies have begun to contribute to the understanding of surface reactions and thermally driven desorption important for the chemistry of star forming clouds. Dusty plasmas are prevalent in many evolved stars just as well as in star forming regions. Radiation pressure on dust plays a significant role in mass loss from some post-main-sequence stars. The mechanisms leading to the formation of carbonaceous dust in the stellar outflows are similar to those important for soot formation in flames. However, nucleation in oxygen-rich outflows is less well understood and remains a challenging research area. Dust is observed in supernova ejecta that have not passed through the reverse shocks that develop in the interaction of ejecta with ambient media. Dust is detected in high redshift galaxies that are sufficiently young that the only stars that could have produced the dust were so massive that they became supernovae. Consequently, the issue of the survival of dust in strong supernova shocks is of considerable interest.

We aim to understand the formation of dense cores by magnetosonic waves in regions where the thermal to magnetic pressure ratio is small. Because of the low-ionisation fraction in molecular clouds, neutral and charged particles are weakly coupled. Ambipolar diffusion then plays an important role in the formation process. A quiescent, uniform plasma is perturbed by a fast-mode wave. Using 2D numerical simulations, we follow the evolution of the fast-mode wave. The simulations are done with a multifluid, adaptive mesh refinement MHD code. Initial perturbations with wavelengths that are 2 orders of magnitude larger than the dissipation length are strongly affected by the ion-neutral drift. Only in situations where there are large variations in the magnetic field corresponding to a highly turbulent gas can fast-mode waves generate dense cores. This means that, in most cores, no substructure can be produced. However, Core D of TMC-1 is an exception to this case. Due to its atypically high ionisation fraction, waves with wavelengths up to 3 orders of magnitude greater than the dissipation length can be present. Such waves are only weakly affected by ambipolar diffusion and can produce dense substructure without large wave-amplitudes. Our results also explain the observed transition from Alfvenic turbulent motion at large scales to subsonic motions at the level of dense cores.

Recent data support the idea that the filaments observed in H_alpha emission near the centres of some galaxy clusters were shaped by bulk flows within their intracluster media. We present numerical simulations of evaporated clump material interacting with impinging winds to investigate this possibility. In each simulation, a clump falls due to gravity while the drag of a wind retards the fall of evaporated material leading to elongation of the tail. However, we find that long filaments can only form if the outflowing wind velocity is sufficiently large, 10^8 cm s^-1. Otherwise, the tail material sinks almost as quickly as the cloud. For reasonable values of parameters, the morphological structure of a tail is qualitatively similar to those observed in clusters. Under certain conditions, the kinematics of the tail resemble those reported in Hatch et al.(2006). A comparison of the observations with the numerical results indicates that the filaments are likely to be a few tens of Myrs old. We also present arguments which suggest that the momentum transfer, from an outflowing wind, in the formation of these filaments is probably significant. As a result, tail formation could play a role in dissipating some of the energy injected by a central AGN close to the cluster centre where it is needed most. The trapping of energy by the cold gas may provide an additional feedback mechanism that helps to regulate the heating of the central regions of galaxy clusters and couple the AGN to the ICM.

To understand the formation of a magnetically dominated molecular cloud out of an atomic cloud, we follow the dynamical evolution of the cloud with a time-dependent axisymmetric magnetohydrodynamic code. A thermally stable warm atomic cloud is initially in static equilibrium with the surrounding hot ionised gas. A shock propagating through the hot medium interacts with the cloud. As a fast-mode shock propagates through the cloud, the gas behind it becomes thermally unstable. The $\beta$ value of the gas also becomes much smaller than the initial value of order unity. These conditions are ideal for magnetohydrodynamic waves to produce high-density clumps embedded in a rarefied warm medium. A slow-mode shock follows the fast-mode shock. Behind this shock a dense shell forms, which subsequently fragments. This is a primary region for the formation of massive stars. Our simulations show that only weak and moderate-strength shocks can form cold clouds which have properties typical of giant molecular clouds.

We have performed 2D hydromagnetic simulations with an adaptive mesh refinement code to examine the response of a pre-existing initially spherical dense core to a non-linear fast-mode wave. One key parameter is the ratio of the wavelength to the initial core radius. If that ratio is large and the wave amplitude is sufficient, significant compression of the core occurs, as envisaged by Myers & Lazarian (1998) in their "turbulent cooling flow" picture. For smaller values of that ratio, an initial value of the ratio of the thermal pressure to magnetic pressure of 0.2, and sufficiently large wave amplitude, the scattering induces the production of dense substructure in the core. This substructure may be related to that detected in the dense core associated with the cyanopolyyne peak in TMC-1. Our simulations also show that short-wavelength waves, contrary to large-wavelength waves, do not confine dense cores.

We have examined a stream-source model for the production of the cometary tails observed in the Helix Nebula NGC 7293 in which a transonic or moderately supersonic stream of ionized gas overruns a source of ionized gas. Hydrodynamic calculations reveal velocity structures which are in good agreement with the observational data on tail velocities and are consistent with observations of the nebular structure. The results also are indicative of a stellar atmosphere origin for the cometary globules. Tail remnants persist for timescales long enough for their identification with faint striations visible in the nebula gas to be plausible.

Using two dimensional simulations, we study the formation of structures with a high-density contrast by magnetohydrodynamic waves in regions in which the ratio of thermal to magnetic pressure is small. The initial state is a uniform background perturbed by fast-mode wave. Our most significant result is that dense structures persist for far longer in a two-dimensional simulation than in the one-dimensional case. Once formed, these structures persist as long as the fast-mode amplitude remains high.

We consider the dynamical evolution of an interstellar cloud that is initially in thermal equilibrium in the warm phase and is then subjected to a sudden increase in the pressure of its surroundings. We find that if the initial plasma beta of the cloud is of order unity, then there is a considerable period during which the material in the cloud both has a small beta and is in the thermally unstable temperature range. These conditions are not only consistent with observations of star forming regions, but are also ideally suited to the production of density inhomogeneities by magnetohydrodynamic waves. The end result should be a cloud whose size and average density are typical of Giant Molecular Clouds (GMCs) and which contains denser regions whose densities are in the range inferred for the translucent clumps in GMCs.

Because of its key role in feedback in star formation and galaxy formation, we examine the nature of the interaction of a flow with discrete sources of mass injection. We show the results of two-dimensional numerical simulations in which we explore a range of configurations for the mass sources and study the effects of their proximity on the downstream flow. The mass sources act effectively as a single source of mass injection if they are so close together that the ratio of their combined mass injection rate is comparable to or exceeds the mass flux of the incident flow into the volume that they occupy. The simulations are relevant to many diffuse sources, such as planetary nebulae and starburst superwinds, in which a global flow interacts with material evaporating or being ablated from the surface of globules of cool, dense gas.

One aspect of supernova remnant evolution that is relatively unstudied is the influence of an AGN environment. A high density ambient medium and a nearby powerful continuum source will assist the cooling of shocked ejecta and swept-up gas. Motion of the surrounding medium relative to the remnant will also affect the remnant morphology. In an extension to previous work we have performed 2D hydrodynamical calculations of SNR evolution in an AGN environment, and have determined the evolutionary behaviour of cold gas in the remnant. The cold gas will contribute to the observed broad line emission in AGNs, and we present preliminary theoretical line profiles from our calculations. A more detailed comparison with observations will be performed in future work. The SNR-AGN interaction may be useful as a diagnostic of the AGN wind.

This paper describes a numerical scheme for multi-fluid hydrodynamics in the limit of small mass densities of the charged particles. The inertia of the charged particles can then be neglected, which makes it possible to write an evolution equation for the magnetic field that can be solved using an implicit scheme. This avoids the severe restriction on the stable timestep that would otherwise arise at high resolution, or when the Hall effect is large. Numerical tests show that the scheme can accurately model steady multi-fluid shock structures both with and without sub-shocks. Although the emphasis is on shocks in molecular clouds, a multi-dimensional version of this code could be applied to any Astrophysical flow in which ambi-polar diffusion or the Hall effect, or both play a significant role.

We investigate the evolution of spherically symmetric supernova remnants in which mass loading takes place due to conductively driven evaporation of embedded clouds. Numerical simulations reveal significant differences between the evolution of conductively mass loaded and the ablatively mass loaded remnants studied in Paper I. A main difference is the way in which conductive mass loading is extinguished at fairly early times, once the interior temperature of the remnant falls below ~10 million K. Thus, at late times remnants that ablatively mass load are dominated by loaded mass and thermal energy, while those that conductively mass load are dominated by swept-up mass and kinetic energy. Simple approximations to the remnant evolution, complementary to those in Paper I, are given.

We show that there are simple one dimensional problems for which the MHD code, ZEUS, generates significant errors, whereas upwind conservative schemes perform very well on these problems.

We analyse the stability of a magnetized medium consisting of a neutral fluid and a fluid of charged particles, coupled to each other through a drag force and exposed to differential body forces (for example, as the result of radiation forces on one phase). We consider a uniform equilibrium and simple model input physics, but do not arbitrarily restrict the relative orientations of the magnetic field, slip velocity and wave vector of the disturbance. We find several instabilities and classify these in terms of wave resonances. We briefly apply our results to the structure of SiO maser regions appearing in the winds from late-type stars.

We show that a cooled region of shocked supernova ejecta forms in a type II supernova-QSO wind interaction, and has a density, an ionization parameter, and a column density compatible with those inferred for the high ionization component of the broad emission line regions in QSOs. The calculations are based on the assumption that the ejecta flow is described initially by a similarity solution investigated by Chevalier (1982) and Nadyozhin (1985) and is spherically symmetric. Heating and cooling appropriate for gas irradiated by a nearby powerful continuum source is included in our model, together with reasonable assumptions for the properties of the QSO wind. The model results are also in agreement with observational correlations and imply reasonable supernova rates.