The far-infrared (FIR) is one of the few wavelength ranges where no astronomical data with sub-arcsec resolution exist yet. Neither of the medium-term satellite projects like SPICA, Millimetron or OST will resolve this malady. Information at high spatial and spectral resolution in the FIR, taken from atomic fine-structure lines, highly excited CO, and especially from water lines would, however, open the door for transformative science. This calls for interferometric concepts. We present first results of our feasibility study IRASSI (Infrared Astronomy Satellite Swarm Interferometry) for a FIR space interferometer. Extending on the principal concept of the ESPRIT study, it features heterodyne interferometry within a swarm of 5 satellite elements. The satellites can drift in and out within a range of several hundred meters, thereby achieving spatial resolutions of <0.1" over the whole wavelength range of 1-6 THz. Precise knowledge on the baselines will be ensured by metrology methods employing laser-based optical frequency combs, for which preliminary ground-based tests have been designed by us. We first show how the science requirements translate into operational and design parameters. We have put much emphasis on the navigational aspects of such a free-flying satellite swarm operating in relatively close vicinity. We hence present work on the formation geometry, the relative dynamics of the swarm, and aspects of our investigation towards attitude estimation. Furthermore, we discuss issues regarding the real-time capability of the autonomous relative positioning system, which is an important aspect for IRASSI where, due to the large raw data rates expected, the interferometric correlation has to be done onboard. We also address questions regarding the spacecraft architecture and how a thermomechanical model is used to study the effect of thermal perturbations on the spacecraft. (abridged)

Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150 K (near the South Pole) and a very low gravity of 0.114 m/s$^2$ or 1100 {\mu}g. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket.