Binospec is a high throughput, 370 to 1000 nm, imaging spectrograph that addresses two adjacent 8' by 15' fields of view. Binospec was commissioned in late 2017 at the f/5 focus of the 6.5m MMT and is now available to all MMT observers. Aperture masks cut from stainless steel with a laser cutter are used to define the entrance apertures that range from 15' long slits to hundreds of 2" slitlets. System throughputs, including the MMT's mirrors and the f/5 wide-field corrector peak at ~30%. Three reflection gratings, duplicated for the two beams, provide resolutions ($\lambda$/$\Delta \lambda$) between 1300 and $>$5000 with a 1" wide slit. Two through-the-mask guiders are used for target acquisition, mask alignment, guiding, and precision offsets. A full-time Shack-Hartmann wave front sensor allows continuous adjustment of primary mirror support forces, telescope collimation and focus. Active flexure control maintains spectrograph alignment and focus under varying gravity and thermal conditions.

We report on the design and performance of the Keck Cosmic Web Imager (KCWI), a general purpose optical integral field spectrograph that has been installed at the Nasmyth port of the 10 m Keck II telescope on Mauna Kea, HI. The novel design provides blue-optimized seeing-limited imaging from 350-560 nm with configurable spectral resolution from 1000 - 20000 in a field of view up to 20"x33". Selectable volume phase holographic (VPH) gratings and high performance dielectric, multilayer silver and enhanced aluminum coatings provide end-to-end peak efficiency in excess of 45% while accommodating the future addition of a red channel that will extend wavelength coverage to 1 micron. KCWI takes full advantage of the excellent seeing and dark sky above Mauna Kea with an available nod-and-shuffle observing mode. The instrument is optimized for observations of faint, diffuse objects such as the intergalactic medium or cosmic web. In this paper, a detailed description of the instrument design is provided with measured performance results from the laboratory test program and ten nights of on-sky commissioning during the spring of 2017. The KCWI team is lead by Caltech and JPL (project management, design and implementation) in partnership with the University of California at Santa Cruz (camera optical and mechanical design) and the W. M. Keck Observatory (observatory interfaces).

The Automated Planet Finder (APF) is a facility purpose-built for the discovery and characterization of extrasolar planets through high-cadence Doppler velocimetry of the reflex barycentric accelerations of their host stars. Located atop Mt. Hamilton, the APF facility consists of a 2.4-m telescope and its Levy spectrometer, an optical echelle spectrometer optimized for precision Doppler velocimetry. APF features a fixed format spectral range from 374 nm - 970 nm, and delivers a "Throughput" (resolution * slit width product) of 114,000 arc-seconds, with spectral resolutions up to 150,000. Overall system efficiency (fraction of photons incident on the primary mirror that are detected by the science CCD) on blaze at 560 nm in planet-hunting mode is 15%. First-light tests on the RV standard stars HD 185144 and HD 9407 demonstrate sub-meter per second precision (RMS per observation) held over a 3-month period. This paper reviews the basic features of the telescope, dome, and spectrometer, and gives a brief summary of first-light performance.

We present the design and performance of the multi-object fiber spectrographs for the Sloan Digital Sky Survey (SDSS) and their upgrade for the Baryon Oscillation Spectroscopic Survey (BOSS). Originally commissioned in Fall 1999 on the 2.5-m aperture Sloan Telescope at Apache Point Observatory, the spectrographs produced more than 1.5 million spectra for the SDSS and SDSS-II surveys, enabling a wide variety of Galactic and extra-galactic science including the first observation of baryon acoustic oscillations in 2005. The spectrographs were upgraded in 2009 and are currently in use for BOSS, the flagship survey of the third-generation SDSS-III project. BOSS will measure redshifts of 1.35 million massive galaxies to redshift 0.7 and Lyman-alpha absorption of 160,000 high redshift quasars over 10,000 square degrees of sky, making percent level measurements of the absolute cosmic distance scale of the Universe and placing tight constraints on the equation of state of dark energy. The twin multi-object fiber spectrographs utilize a simple optical layout with reflective collimators, gratings, all-refractive cameras, and state-of-the-art CCD detectors to produce hundreds of spectra simultaneously in two channels over a bandpass covering the near ultraviolet to the near infrared, with a resolving power R = \lambda/FWHM ~ 2000. Building on proven heritage, the spectrographs were upgraded for BOSS with volume-phase holographic gratings and modern CCD detectors, improving the peak throughput by nearly a factor of two, extending the bandpass to cover 360 < \lambda < 1000 nm, and increasing the number of fibers from 640 to 1000 per exposure. In this paper we describe the original SDSS spectrograph design and the upgrades implemented for BOSS, and document the predicted and measured performances.

The MMT and Magellan infrared spectrograph (MMIRS) is a cryogenic multiple slit spectrograph operating in the wavelength range 0.9-2.4 micron. MMIRS' refractive optics offer a 6.9 by 6.9 arcmin field of view for imaging with a spatial resolution of 0.2 arcsec per pixel on a HAWAII-2 array. For spectroscopy, MMIRS can be used with long slits up to 6.9 arcmin long, or with custom slit masks having slitlets distributed over a 4 by 6.9 arcmin area. A range of dispersers offer spectral resolutions of 800 to 3000. MMIRS is designed to be used at the f/5 foci of the MMT or Magellan Clay 6.5m telescopes. MMIRS was commissioned in 2009 at the MMT and has been in routine operation at the Magellan Clay Telescope since 2010. MMIRS is being used for a wide range of scientific investigations from exoplanet atmospheres to Ly-alpha emitters.

We present a new solution for the dispersive element in astronomical spectrographs, which in many cases can provide an upgrade path to enhance the spectral resolution of existing moderate-resolution reflection-grating spectrographs. We demonstrate that in the case of LRIS-R at the Keck 1 Telescope a spectral resolution of 18,000 can be achieved with reasonable throughput under good seeing conditions.

The U.S. Naval Observatory Robotic Astrometric Telescope (URAT) project aims at a highly accurate (5 mas), ground-based, all-sky survey. Requirements are presented for the optics and telescope for this 0.85 m aperture, 4.5 degree diameter field-of-view, specialized instrument, which are close to the capability of the industry. The history of the design process is presented as well as astrometric performance evaluations of the toleranced, optical design, with expected wavefront errors included.

The Ohara glass S-FTM16 is of considerable interest for near-infrared optical designs because it transmits well through the K band and because negative S-FTM16 elements can be used to accurately achromatize positive calcium fluoride elements in refractive collimators and cameras. Glass manufacturers have sophisticated equipment to measure the refractive index at room temperature, but cannot typically measure the refractive index at cryogenic temperatures. Near-infrared optics, however, are operated at cryogenic temperatures to reduce thermal background. Thus we need to know the temperature dependence of S-FTM16's refractive index. We report here our measurements of the thermal dependence of S-FTM16's refractive index between room temperature and ~77 K. Within our measurement errors we find no evidence for a wavelength dependence or a nonlinear temperature term so our series of measurements can be reduced to a single number. We find that Delta n_{abs} / Delta T = -2.4x10^{-6} K^{-1} between 298 K and ~77 K and in the wavelength range 0.6 micron to 2.6 micron. We estimate that the systematic error (which dominates the measurement error) in our measurement is 10%, sufficiently low for most purposes. We also find the integrated linear thermal expansion of S-FTM16 between 298 K and 77 K is -0.00167 m m^{-1}.

We use the Karachentseva (1973) ``Catalogue of Very Isolated Galaxies'' to investigate a candidate list of >100 very isolated early-type galaxies. Broad-band imaging and low resolution spectroscopy are available for a large fraction of these candidates and result in a sample of 102 very isolated early-type galaxies, including 65 ellipticals and 37 S0 galaxies. Many of these systems are quite luminous and the resulting optical luminosity functions of the Es and early-types (E+S0s) show no statistical differences when compared to luminosity functions dominated by group and cluster galaxies. However, whereas S0s outnumber Es 4:1 in the CfA survey, isolated Es outnumber S0s by nearly 2:1. We conclude that very isolated elliptical galaxies show no evidence for a different formation and/or evolution process compared to Es formed in groups or clusters, but that most S0s are formed by a mechanism (e.g., gas stripping) that occurs only in groups and rich clusters. Our luminosity function results for ellipticals are consistent with very isolated ellipticals being formed by merger events, in which no companions remain. CHANDRA observations were proposed to test specifically the merger hypothesis for isolated ellipticals. However, this program has resulted in the observation of only one isolated early-type galaxy, the S0 KIG 284, which was not detected at a limit well below that expected for a remnant group of galaxies. Therefore, the hypothesis remains untested that very isolated elliptical galaxies are the remains of a compact group of galaxies which completely merged.

The observation of a prompt optical flash from GRB990123 convincingly demonstrated the value of autonomous robotic telescope systems. Pursuing a program of rapid follow-up observations of gamma-ray bursts, the Robotic Optical Transient Search Experiment (ROTSE) has developed a next-generation instrument, ROTSE-III, that will continue the search for fast optical transients. The entire system was designed as an economical robotic facility to be installed at remote sites throughout the world. There are seven major system components: optics, optical tube assembly, CCD camera, telescope mount, enclosure, environmental sensing & protection and data acquisition. Each is described in turn in the hope that the techniques developed here will be useful in similar contexts elsewhere.

The Echellette Spectrograph and Imager (ESI) is a multipurpose instrument which has been delivered by the Instrument Development Laboratory of Lick Observatory for use at the Cassegrain focus of the Keck II telescope. ESI saw first light on August 29, 1999. ESI is a multi-mode instrument that enables the observer to seamlessly switch between three modes during an observation. The three modes of ESI are: An R=13,000-echellette mode; Low-dispersion prismatic mode; Direct imaging mode. ESI contains a unique flexure compensation system which reduces the small instrument flexure to negligible proportions. Long-exposure images on the sky show FWHM spot diameters of 34 microns (0.34") averaged over the entire field of view. These are the best non-AO images taken in the visible at Keck Observatory to date. Maximum efficiencies are measured to be 28% for the echellette mode and greater than 41% for low-dispersion prismatic mode including atmospheric, telescope and detector losses. In this paper we describe the instrument and its development. We also discuss the performance-testing and some observational results.

This paper presents NICMOS images of the nucleus and emission line regions in NGC 1068. The location of the nucleus relative to the emission line features is established and the physics underlying the morphology is discussed.

We report a new Fabry-Perot search for Halpha emission from the intergalactic cloud HI 1225+01 in an attempt to measure the low redshift ionizing background radiation. We set a new 2 sigma upper limit on Halpha emission of 8 mR (5 x 10^{-20} ergs cm^{-2} s^{-1} arcsec^{-2}). Conversion of this limit to limits on the strength of the ionizing background requires knowledge of the ratio of the projected to total surface area of this cloud, which is uncertain. We discuss the plausible range of this ratio, and within this range find that the strength of the ionizing backround is in the lower range of, but consistent with, previous observational and theoretical estimates.

High resolution, 1.1, 1.6, and 2.2 micron imaging of the luminous infrared galaxy NGC 6090 obtained with NICMOS of the Hubble Space Telescope are presented. These new observations are centered on the two nuclei of the merger, and reveal the spiral structure of the eastern galaxy and the amorphous nature of the western galaxy. The nuclear separation of 3.2 kpc (H_0 = 75 km/s/Mpc) indicates that NGC 6090 is at an intermediate stage of merging. Bright knots/clusters are also visible in the region overlapping the merging galaxies; four of these knots appear bluer than the underlying galaxies and have colors consistent with young (<~ 10^7 yr) star clusters. The spatial coincidence of the knots with the molecular gas in NGC 6090 indicates that much of the present star formation is occuring outside of the nuclear region of merging galaxies, consistent with recent studies of other double nuclei luminous infrared galaxies.

We report high resolution imaging of the ultraluminous infrared galaxy Arp 220 at 1.1, 1.6, and 2.22 microns with NICMOS on the HST. The diffraction-limited images at 0.1--0.2 arcsecond resolution clearly resolve both nuclei of the merging galaxy system and reveal for the first time a number of luminous star clusters in the circumnuclear envelope. The morphologies of both nuclei are strongly affected by dust obscuration, even at 2.2 microns : the primary nucleus (west) presents a crescent shape, concave to the south and the secondary (eastern) nucleus is bifurcated by a dust lane with the southern component being very reddened. In the western nucleus, the morphology of the 2.2 micron emission is most likely the result of obscuration by an opaque disk embedded within the nuclear star cluster. The morphology of the central starburst-cluster in the western nucleus is consistent with either a circumnuclear ring of star formation or a spherical cluster with the bottom half obscured by the embedded dust disk. Comparison of cm-wave radio continuum maps with the near-infrared images suggests that the radio nuclei lie in the dust disk on the west and near the highly reddened southern component of the eastern complex. The radio nuclei are separated by 0.98 arcseconds (corresponding to 364 pc at 77 Mpc) and the half-widths of the infrared nuclei are approximately 0.2-0.5 arcseconds. At least 8, unresolved infrared sources -- probably globular clusters -- are also seen in the circumnuclear envelope at radii 2-7 arcseconds . Their near-infrared colors do not significantly constrain their ages.