Context. Massive stars are predicted to excite internal gravity waves (IGWs) by turbulent core convection and from turbulent pressure fluctuations in their near-surface layers. These IGWs are extremely efficient at transporting angular momentum and chemical species within stellar interiors, but they remain largely unconstrained observationally. Aims. We aim to characterise the photometric detection of IGWs across a large number of O and early-B stars in the Hertzsprung-Russell diagram, and explain the ubiquitous detection of stochastic variability in the photospheres of massive stars. Methods. We combined high-precision time-series photometry from the NASA Transiting Exoplanet Survey Satellite with high-resolution ground-based spectroscopy of 70 stars with spectral types O and B to probe the relationship between the photometric signatures of IGWs and parameters such as spectroscopic mass, luminosity, and macroturbulence. Results. A relationship is found between the location of a star in the spectroscopic Hertzsprung-Russell diagram and the amplitudes and frequencies of stochastic photometric variability in the light curves of massive stars. Furthermore, the properties of the stochastic variability are statistically correlated with macroturbulent velocity broadening in the spectral lines of massive stars. Conclusions. The common ensemble morphology for the stochastic low-frequency variability detected in space photometry and its relationship to macroturbulence is strong evidence for IGWs in massive stars, since these types of waves are unique in providing the dominant tangential velocity field required to explain the observed spectroscopy.

Context. Recent, nonlinear simulations of wave generation and propagation in full-star models have been carried out in the anelastic approximation using spectral methods. Although it makes long time steps possible, this approach excludes the physics of sound waves completely and rather high artificial viscosity and thermal diffusivity are needed for numerical stability. Direct comparison with observations is thus limited. Aims. We explore the capabilities of our compressible multidimensional hydrodynamics code SLH to simulate stellar oscillations. Methods. We compare some fundamental properties of internal gravity and pressure waves in 2D SLH simulations to linear wave theory using two test cases: (1) an interval gravity wave packet in the Boussinesq limit and (2) a realistic $3\mathrm{M}_\odot$ stellar model with a convective core and a radiative envelope. Oscillation properties of the stellar model are also discussed in the context of observations. Results. Our tests show that specialized low-Mach techniques are necessary when simulating oscillations in stellar interiors. Basic properties of internal gravity and pressure waves in our simulations are in good agreement with linear wave theory. As compared to anelastic simulations of the same stellar model, we can follow internal gravity waves of much lower frequencies. The temporal frequency spectra of velocity and temperature are flat and compatible with observed spectra of massive stars. Conclusion. The low-Mach compressible approach to hydrodynamical simulations of stellar oscillations is promising. Our simulations are less dissipative and require less luminosity boosting than comparable spectral simulations. The fully-compressible approach allows the coupling of gravity and pressure waves to be studied too.

Almost all massive stars explode as supernovae and form a black hole or neutron star. The remnant mass and the impact of the chemical yield on subsequent star formation and galactic evolution strongly depend on the internal physics of the progenitor star, which is currently not well understood. The theoretical uncertainties of stellar interiors accumulate with stellar age, which is particularly pertinent for the blue supergiant phase. Stellar oscillations represent a unique method of probing stellar interiors, yet inference for blue supergiants is hampered by a dearth of observed pulsation modes. Here we report the detection of diverse variability in blue supergiants using the K2 and TESS space missions. The discovery of pulsation modes or an entire spectrum of low-frequency gravity waves in these stars allow us to map the evolution of hot massive stars towards the ends of their lives. Future asteroseismic modelling will provide constraints on ages, core masses, interior mixing, rotation and angular momentum transport. The discovery of variability in blue supergiants is a step towards a data-driven empirical calibration of theoretical evolution models for the most massive stars in the Universe.

We present the first three-dimensional (3D), hydrodynamic simulations of the core convection zone (CZ) and extended radiative zone spanning from 1% to 90% of the stellar radius of an intermediate mass (3 $\mathrm{M}_\odot$) star. This allows us to self-consistently follow the generation of internal gravity waves (IGWs) at the convective boundary and their propagation to the surface. We find that convection in the core is dominated by plumes. The frequency spectrum in the CZ and that of IGW generation is a double power law as seen in previous two-dimensional (2D) simulations. The spectrum is significantly flatter than theoretical predictions using excitation through Reynolds stresses induced by convective eddies alone. It is compatible with excitation through plume penetration. An empirically determined distribution of plume frequencies generally matches the one necessary to explain a large part of the observed spectrum. We observe waves propagating in the radiation zone and excited standing modes, which can be identified as gravity and fundamental modes. They show similar frequencies and node patterns to those predicted by the stellar oscillation code GYRE. The continuous part of the spectrum fulfills the IGW dispersion relation. A spectrum of tangential velocity and temperature fluctuations close to the surface is extracted, which are directly related to observable brightness variations in stars. Unlike 2D simulations we do not see the high frequencies associated with wave breaking, likely because these 3D simulations are more heavily damped.

The evolution of a star is driven by the physical processes in its interior making the theory of stellar structure and evolution the most crucial ingredient for not only stellar evolution studies, but any field of astronomy which relies on the yields along stellar evolution. High-precision time-series photometric data assembled by recent space missions revealed that current models of stellar structure and evolution show major shortcomings already in the two earliest nuclear burning phases, impacting all subsequent phases prior to the formation of the end-of-life remnant. This white paper focuses specifically on the transport of chemical elements and of angular momentum in the stellar structure and evolution models of stars born with convective core, as revealed by their gravity-mode oscillations.

Internal gravity waves (IGW) propagate in the radiation zones of all stars. During propagation, their amplitudes are affected by two main features: radiative diffusion and density stratification. We have studied the implications of these two features on waves traveling within the radiative zones of non-rotating stars with stellar parameters obtained from the one dimensional stellar evolution code, MESA. As a simple measure of induced wave dynamics, we define a criterion to see if waves can become nonlinear and if so, under what conditions. This was done to understand the role IGW may play in angular momentum transport and mixing within stellar interiors. We find that the IGW generation spectrum, convective velocities and the strength of density stratification all play major roles in whether waves become nonlinear. With increasing stellar mass, there is an increasing trend in nonlinear wave energies. The trends with different metallicities and ages depend on the generation spectrum.

Early-type stars are predicted to excite an entire spectrum of internal gravity waves (IGWs) at the interface of their convective cores and radiative envelopes. Numerical simulations of IGWs predict stochastic low-frequency variability in photometric observations, yet the detection of IGWs in early-type stars has been limited by a dearth of high-quality photometric time series. We present observational evidence of stochastic low-frequency variability in the CoRoT photometry of a sample of O, B, A and F stars. The presence of this stochastic low-frequency variability in stars across the upper main-sequence cannot be universally explained as granulation or stellar winds, but its morphology is found to be consistent with predictions from IGW simulations.

Context. Main sequence stars with a convective core are predicted to stochastically excite Internal Gravity Waves (IGWs), which effectively transport angular momentum throughout the stellar interior and explain the observed near-uniform interior rotation rates of intermediate-mass stars. However, there are few detections of IGWs, and fewer still made using photometry, with more detections needed to constrain numerical simulations. Aims. We aim to formalise the detection and characterisation of IGWs in photometric observations of stars born with convective cores (M > 1.5 M$_{\odot}$) and parameterise the low-frequency power excess caused by IGWs. Methods. Using the most recent CoRoT light curves for a sample of O, B, A and F stars, we parameterise the morphology of the flux contribution of IGWs in Fourier space using an MCMC numerical scheme within a Bayesian framework. We compare this to predictions from IGW numerical simulations and investigate how the observed morphology changes as a function of stellar parameters. Results. We demonstrate that a common morphology for the low-frequency power excess is observed in early-type stars observed by CoRoT. Our study shows that a background frequency-dependent source of astrophysical signal is common, which we interpret as IGWs. We provide constraints on the amplitudes of IGWs and the shape of their detected frequency spectrum across a range of mass, which is the first ensemble study of stochastic variability in such a diverse sample of stars. Conclusions. The evidence of a low-frequency power excess across a wide mass range supports the interpretation of IGWs in photometry of O, B, A and F stars. We also discuss the prospects of observing hundreds of massive stars with the Transiting Exoplanet Survey Satellite (TESS) in the near future.

The treatment of mixing processes is still one of the major uncertainties in 1D stellar evolution models. This is mostly due to the need to parametrize and approximate aspects of hydrodynamics in hydrostatic codes. In particular, the effect of hydrodynamic instabilities in rotating stars, for example, dynamical shear instability, evades consistent description. We intend to study the accuracy of the diffusion approximation to dynamical shear in hydrostatic stellar evolution models by comparing 1D models to a first-principle hydrodynamics simulation starting from the same initial conditions. We chose an initial model calculated with the stellar evolution code GENEC that is just at the onset of a dynamical shear instability but does not show any other instabilities (e.g., convection). This was mapped to the hydrodynamics code SLH to perform a 2D simulation in the equatorial plane. We compare the resulting profiles in the two codes and compute an effective diffusion coefficient for the hydro simulation. Shear instabilities develop in the 2D simulation in the regions predicted by linear theory to become unstable in the 1D model. Angular velocity and chemical composition is redistributed in the unstable region, thereby creating new unstable regions. Eventually the 2D simulation settles in a symmetric, steady state, which is Richardson stable everywhere, whereas the instability remains for longer in the 1D model due to current limitations in the 1D code. A spatially resolved diffusion coefficient is extracted by comparing the initial and final profiles of mean atomic mass. The presented simulation gives a first insight on hydrodynamics of shear instabilities in a real stellar environment and even allows us to directly extract an effective diffusion coefficient. We see evidence for a critical Richardson number of 0.25 as regions above this value remain stable for the course of the simulation.

Based on the Roe solver a new technique that allows to correctly represent low Mach number flows with a discretization of the compressible Euler equations was proposed in Miczek et al.: New numerical solver for flows at various mach numbers. A&A 576, A50 (2015). We analyze properties of this scheme and demonstrate that its limit yields a discretization of the continuous limit system. Furthermore we perform a linear stability analysis for the case of explicit time integration and study the performance of the scheme under implicit time integration via the evolution of its condition number. A numerical implementation demonstrates the capabilities of the scheme on the example of the Gresho vortex which can be accurately followed down to Mach numbers of ~1e-10 .

In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysics, Seismics), GPI-2/GASPI (Toolkit for HPC), Seven-League Hydro (Astrophysics), ILBDC (Lattice Boltzmann CFD), Iphigenie (Molecular Dynamic), FLASH (Astrophysics), GADGET (Cosmological Dynamics), PSC (Plasma Physics), waLBerla (Lattice Boltzmann CFD), Musubi (Lattice Boltzmann CFD), Vertex3D (Stellar Astrophysics), CIAO (Combustion CFD), and LS1-Mardyn (Material Science). The projects were allowed to use the machine exclusively during the 28 day period, which corresponds to a total of 63.4 million core-hours, of which 43.8 million core-hours were used by the applications, resulting in a utilization of 69%. The top 3 users were using 15.2, 6.4, and 4.7 million core-hours, respectively.

In the classical picture, electron-capture supernovae and the accretion-induced collapse of oxygen-neon white dwarfs (ONeWDs) undergo an oxygen deflagration phase before gravitational collapse produces a neutron star (NS). These types of core collapse events are postulated to explain several astronomical phenomena. In this work, the deflagration phase is simulated for the first time using multidimensional hydrodynamics, with the aim of gaining new insight into the explosive deaths of $8-10~M_\odot$ stars and ONeWDs that accrete material from a binary companion star. The main aim is to determine whether these events are thermonuclear or core-collapse supernova explosions, and hence whether NSs are formed by such phenomena. The deflagration is simulated in ONe cores with three different central ignition densities. The intermediate density case is perhaps the most realistic, being based on recent nuclear physics calculations and 1D stellar models. The 3D hydrodynamic simulations presented in this work begin from a centrally confined flame structure using a level-set-based flame approach and are performed in $256^3$ and $512^3$ numerical resolutions. In the simulations with intermediate and low ignition density, the cores do not appear to collapse into NSs. Instead, almost a solar mass of material becomes unbound from the cores, leaving bound remnants. These simulations represent the case in which semiconvective mixing during the electron-capture phase preceding the deflagration is inefficient. The masses of the bound remnants double when Coulomb corrections are included in the EoS, however they still do not exceed the effective Chandrasekhar mass and, hence, would not collapse into NSs. The simulations with the highest ignition density ($\log_{10}\rho_{\rm c}=10.3$), representing the case where semiconvective mixing is very efficient, show clear signs that the core will collapse into a NS.

Many problems in stellar astrophysics feature flows at low Mach numbers. Conventional compressible hydrodynamics schemes frequently used in the field have been developed for the transonic regime and exhibit excessive numerical dissipation for these flows. While schemes were proposed that solve hydrodynamics strictly in the low Mach regime and thus restrict their applicability, we aim at developing a scheme that correctly operates in a wide range of Mach numbers. Based on an analysis of the asymptotic behavior of the Euler equations in the low Mach limit we propose a novel scheme that is able to maintain a low Mach number flow setup while retaining all effects of compressibility. This is achieved by a suitable modification of the well-known Roe solver. Numerical tests demonstrate the capability of this new scheme to reproduce slow flow structures even in moderate numerical resolution. Our scheme provides a promising approach to a consistent multidimensional hydrodynamical treatment of astrophysical low Mach number problems such as convection, instabilities, and mixing in stellar evolution.

In the version of the SD scenario of SNe Ia studied here, a CO WD explodes close to the Chandrasekhar limit after accreting material from a non-degenerate He companion. In the present study, we employ the Stellar GADGET code to perform 3D hydrodynamical simulations of the interaction of the SN Ia ejecta with the He companion taking into account its orbital motion and spin. It is found that only 2%--5% of the initial companion mass are stripped off from the outer layers of He companions due to the SN impact. The dependence of the unbound mass (or the kick velocity) on the orbital separation can be fitted in good approximation by a power law for a given companion model. After the SN impact, the outer layers of a He donor star are significantly enriched with heavy elements from the low-expansion-velocity tail of SN Ia ejecta. The total mass of accumulated SN-ejecta material on the companion surface reaches about > 10e-3 M_sun for different companion models. This enrichment with heavy elements provides a potential way to observationally identify the surviving companion star in SN remnants. Finally, by artificially adjusting the explosion energy of the W7 explosion model, we find that the total accumulation of SN ejecta on the companion surface is also dependent on the explosion energy with a power law relation in good approximation.

In the SD scenario of SNe Ia the companion survives the SN explosion and thus should be visible near the center of the SN remnant and may show some unusual features. A promising approach to test progenitor models of SNe Ia is to search for the companion in SNRs. Here we present the results of 3D hydrodynamics simulations of the interaction between the SN Ia blast wave and a MS companion taking into consideration its orbital motion and spin. The primary goal of this work is to investigate the rotation of surviving companions after SN Ia explosions in the WD+MS scenario. We use Eggleton's code including the optically thick accretion wind model to obtain realistic models of companions. The impact of the SN blast wave on these companions is followed in 3D hydrodynamic simulations employing the SPH code GADGET3. We find that the rotation of the companion does not significantly affect the amount of stripped mass and the kick velocity caused by the SN impact. However, in our simulations, the rotational velocity of the companion is significantly reduced to about 14% to 32% of its pre-explosion value due to the expansion of the companion and the fact that 55%-89% of the initial angular momentum is carried away by the stripped matter. Compared with the observed rotational velocity of the presumed companion star of Tycho's SN, Tycho G, of 6 km/s the final rotational velocity we obtain is still higher by at least a factor of two. Whether this difference is significant, and may cast doubts on the suggestion that Tycho G is the companion of SN 1572, has to be investigated in future studies. Based on binary population synthesis results we present, for the first time, the expected distribution of rotational velocities of companions after the explosion which may provide useful information for the identification of the surviving companion in observational searches in other historical SNRs.

The identity of the progenitor systems of SNe Ia is still uncertain. In the single-degenerate (SD) scenario, the interaction between the SN blast wave and the outer layers of a main sequence (MS) companion star strips off H-rich material which is then mixed into the ejecta. Strong contamination of the SN ejecta with stripped material could lead to a conflict with observations of SNe Ia. This constrains the SD progenitor model. In this work, our previous simulations based on simplified progenitor donor stars have been updated by adopting more realistic progenitor-system models that result from fully detailed, state-of-the-art binary evolution calculations. We use Eggleton's stellar evolution code including the optically thick accretion wind model and the possibility of the effects of accretion disk instabilities to obtain realistic models of companions for different progenitor systems. The impact of the SN blast wave on these companion stars is followed in three-dimensional hydrodynamic simulations employing the SPH code GADGET3. We find that the stripped masses range from 0.11 to 0.18 M_sun. The kick velocity is between 51 and 105 km/s. We find that the stripped mass and kick velocity depend on the ratio of the orbital separation to the radius of a companion. They can be fitted by a power law for a given companion model. However, the structure of the companion star is also important for the amount of stripped material. With more realistic companion star models than in previous studies, our simulations show that the H masses stripped from companions are inconsistent with the best observational limits (< 0.01 M_sun) derived from nebular spectra. However, a rigorous forward modeling based on impact simulations with radiation transfer is required to reliably predict observable signatures of the stripped H and to conclusively assess the viability of the considered SN Ia progenitor scenario.

Mergers of two carbon-oxygen white dwarfs have long been suspected to be progenitors of Type Ia Supernovae. Here we present our modifications to the cosmological smoothed particle hydrodynamics code Gadget to apply it to stellar physics including but not limited to mergers of white dwarfs. We demonstrate a new method to map a one-dimensional profile of an object in hydrostatic equilibrium to a stable particle distribution. We use the code to study the effect of initial conditions and resolution on the properties of the merger of two white dwarfs. We compare mergers with approximate and exact binary initial conditions and find that exact binary initial conditions lead to a much more stable binary system but there is no difference in the properties of the actual merger. In contrast, we find that resolution is a critical issue for simulations of white dwarf mergers. Carbon burning hotspots which may lead to a detonation in the so-called violent merger scenario emerge only in simulations with sufficient resolution but independent of the type of binary initial conditions. We conclude that simulations of white dwarf mergers which attempt to investigate their potential for Type Ia supernovae should be carried out with at least 10^6 particles.