Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2.

The X-ray Integral Field Unit (X-IFU) is the high resolution X-ray spectrometer of the ESA Athena X-ray observatory. Over a field of view of 5' equivalent diameter, it will deliver X-ray spectra from 0.2 to 12 keV with a spectral resolution of 2.5 eV up to 7 keV on ~5 arcsecond pixels. The X-IFU is based on a large format array of super-conducting molybdenum-gold Transition Edge Sensors cooled at about 90 mK, each coupled with an absorber made of gold and bismuth with a pitch of 249 microns. A cryogenic anti-coincidence detector located underneath the prime TES array enables the non X-ray background to be reduced. A bath temperature of about 50 mK is obtained by a series of mechanical coolers combining 15K Pulse Tubes, 4K and 2K Joule-Thomson coolers which pre-cool a sub Kelvin cooler made of a 3He sorption cooler coupled with an Adiabatic Demagnetization Refrigerator. Frequency domain multiplexing enables to read out 40 pixels in one single channel. A photon interacting with an absorber leads to a current pulse, amplified by the readout electronics and whose shape is reconstructed on board to recover its energy with high accuracy. The defocusing capability offered by the Athena movable mirror assembly enables the X-IFU to observe the brightest X-ray sources of the sky (up to Crab-like intensities) by spreading the telescope point spread function over hundreds of pixels. Thus the X-IFU delivers low pile-up, high throughput (>50%), and typically 10 eV spectral resolution at 1 Crab intensities, i.e. a factor of 10 or more better than Silicon based X-ray detectors. In this paper, the current X-IFU baseline is presented, together with an assessment of its anticipated performance in terms of spectral resolution, background, and count rate capability. The X-IFU baseline configuration will be subject to a preliminary requirement review that is scheduled at the end of 2018.

Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through B-mode (divergent-free) polarization pattern embedded in the Cosmic Microwave Background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2,622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The U.S. LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40 GHz to 235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280 GHz to 402 GHz) with three types of single frequency detectors. The detectors will be made with Transition Edge Sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator.The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplidier. We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.

The X-ray Integral Field Unit (X-IFU) on board the Advanced Telescope for High-ENergy Astrophysics (Athena) will provide spatially resolved high-resolution X-ray spectroscopy from 0.2 to 12 keV, with 5 arc second pixels over a field of view of 5 arc minute equivalent diameter and a spectral resolution of 2.5 eV up to 7 keV. In this paper, we first review the core scientific objectives of Athena, driving the main performance parameters of the X-IFU, namely the spectral resolution, the field of view, the effective area, the count rate capabilities, the instrumental background. We also illustrate the breakthrough potential of the X-IFU for some observatory science goals. Then we briefly describe the X-IFU design as defined at the time of the mission consolidation review concluded in May 2016, and report on its predicted performance. Finally, we discuss some options to improve the instrument performance while not increasing its complexity and resource demands (e.g. count rate capability, spectral resolution). The X-IFU will be provided by an international consortium led by France, The Netherlands and Italy, with further ESA member state contributions from Belgium, Finland, Germany, Poland, Spain, Switzerland and two international partners from the United States and Japan.

In this paper we present a catalogue of Giant Molecular Clouds (GMCs) in the Andromeda (M31) galaxy extracted from the Hershel Exploitation of Local Galaxy Andromeda (HELGA) dataset. GMCs are identified from the Herschel maps using a hierarchical source extraction algorithm. We present the results of this new catalogue and characterise the spatial distribution and spectral energy properties of its clouds based on the radial dust/gas properties found by Smith et al (2012). 236 GMCs in the mass range 10^4-10^7 M_sol are identified, their cumulative mass distribution is found to be proportional to M^-1.45 in agreement with earlier studies. The GMCs appear to follow the same cloud mass to L_CO correlation observed in the Milky Way. However, comparison between this catalogue and interferometry studies also shows that the GMCs are substructured below the Herschel resolution limit suggesting that we are observing associations of GMCs. Following Gordon et al. (2006), we study the spatial structure of M31 by splitting the observed structure into a set of spiral arms and offset rings. We fit radii of 10.5 and 15.5 kpc to the two most prominent rings. We then fit a logarithmic spiral with a pitch angle of 8.9 deg to the GMCs not associated with either ring. Lastly, we comment upon the effects of deprojection on our results and investigate the effect different models for M31's inclination will have upon the projection of an unperturbed spiral arm system.

The Athena+ mission concept is designed to implement the Hot and Energetic Universe science theme submitted to the European Space Agency in response to the call for White Papers for the definition of the L2 and L3 missions of its science program. The Athena+ science payload consists of a large aperture high angular resolution X-ray optics and twelve meters away, two interchangeable focal plane instruments: the X-ray Integral Field Unit (X-IFU) and the Wide Field Imager (WFI). The X-IFU is a cryogenic X-ray spectrometer, based on a large array of Transition Edge Sensors (TES), offering 2.5 eV spectral resolution, with ~5" pixels, over a field of view of 5 arc minutes in diameter. In this paper, we briefly describe the Athena+ mission concept and the X-IFU performance requirements. We then present the X-IFU detector and readout electronics principles, the current design of the focal plane assembly, the cooling chain and review the global architecture design. Finally, we describe the current performance estimates, in terms of effective area, particle background rejection, count rate capability and velocity measurements. Finally, we emphasize on the latest technology developments concerning TES array fabrication, spectral resolution and readout performance achieved to show that significant progresses are being accomplished towards the demanding X-IFU requirements.

We present a study of the infrared/submm emission of the LMC star forming complex N158-N159-N160. Combining observations from the Spitzer Space Telescope (3.6-70um), the Herschel Space Observatory (100-500um) and LABOCA (870um) allows us to work at the best angular resolution available now for an extragalactic source. We observe a remarkably good correlation between SPIRE and LABOCA emission and resolve the low surface brightnesses emission. We use the Spitzer and Herschel data to perform a resolved Spectral Energy Distribution (SED) modelling of the complex. Using MBB, we derive a global emissivity index beta_c of 1.47. If beta cold is fixed to 1.5, we find an average temperature of 27K. We also apply the Galliano et al. (2011) modelling technique (and amorphous carbon to model carbon dust) to derive maps of the star formation rate, the mean starlight intensity, the fraction of PAHs or the dust mass surface density of the region. We observe that the PAH fraction strongly decreases in the HII regions. This decrease coincides with peaks in the mean radiation field intensity map. The dust surface densities follow the FIR distribution, with a total dust mass of 2.1x10^4 Msolar (2.8 times less than when using graphite grains) in the resolved elements we model. We find a non-negligible amount of dust in the molecular cloud N159 South (showing no massive SF). We also investigate the drivers of the Herschel/PACS and SPIRE submm colours as well as the variations in the gas-to-dust mass ratio (G/D) and the XCO conversion factor in the region N159. We finally model individual regions to analyse variations in the SED shape across the complex and the 870um emission in more details. No measurable submm excess emission at 870um seems to be detected in these regions.

We have obtained Herschel images at five wavelengths from 100 to 500 micron of a ~5.5x2.5 degree area centred on the local galaxy M31 (Andromeda), our nearest neighbour spiral galaxy, as part of the Herschel guaranteed time project "HELGA". The main goals of HELGA are to study the characteristics of the extended dust emission, focusing on larger scales than studied in previous observations of Andromeda at an increased spatial resolution, and the obscured star formation. In this paper we present data reduction and Herschel maps, and provide a description of the far-infrared morphology, comparing it with features seen at other wavelengths. We use high--resolution maps of the atomic hydrogen, fully covering our fields, to identify dust emission features that can be associated to M31 with confidence, distinguishing them from emission coming from the foreground Galactic cirrus. Thanks to the very large extension of our maps we detect, for the first time at far-infrared wavelengths, three arc-like structures extending out to ~21, ~26 and ~31 kpc respectively, in the south-western part of M31. The presence of these features, hosting ~2.2e6 Msol of dust, is safely confirmed by their detection in HI maps. Overall, we estimate a total dust mass of ~5.8e7 Msol, about 78% of which is contained in the two main ring-like structures at 10 and 15 kpc, at an average temperature of 16.5 K. We find that the gas-to-dust ratio declines exponentially as a function of the galacto-centric distance, in agreement with the known metallicity gradient, with values ranging from 66 in the nucleus to ~275 in the outermost region. [Abridged]

We present an analysis of the dust and gas in Andromeda, using Herschel images sampling the entire far-infrared peak. We fit a modified-blackbody model to ~4000 quasi-independent pixels with spatial resolution of ~140pc and find that a variable dust-emissivity index (beta) is required to fit the data. We find no significant long-wavelength excess above this model suggesting there is no cold dust component. We show that the gas-to-dust ratio varies radially, increasing from ~20 in the center to ~70 in the star-forming ring at 10kpc, consistent with the metallicity gradient. In the 10kpc ring the average beta is ~1.9, in good agreement with values determined for the Milky Way (MW). However, in contrast to the MW, we find significant radial variations in beta, which increases from 1.9 at 10kpc to ~2.5 at a radius of 3.1kpc and then decreases to 1.7 in the center. The dust temperature is fairly constant in the 10kpc ring (ranging from 17-20K), but increases strongly in the bulge to ~30K. Within 3.1kpc we find the dust temperature is highly correlated with the 3.6 micron flux, suggesting the general stellar population in the bulge is the dominant source of dust heating there. At larger radii, there is a weak correlation between the star formation rate and dust temperature. We find no evidence for 'dark gas' in M31 in contrast to recent results for the MW. Finally, we obtained an estimate of the CO X-factor by minimising the dispersion in the gas-to-dust ratio, obtaining a value of (1.9+/-0.4)x10^20 cm^-2 [K kms^-1]^-1.

We analyze the statistics and star formation rate obtained in high-resolution numerical experiments of forced supersonic turbulence, and compare with observations. We concentrate on a systematic comparison of solenoidal (divergence-free) and compressive (curl-free) forcing, which are two limiting cases of turbulence driving. Our results show that for the same RMS Mach number, compressive forcing produces a three times larger standard deviation of the density probability distribution. When self-gravity is included in the models, the star formation rate is more than one order of magnitude higher for compressive forcing than for solenoidal forcing.

The properties of Galactic molecular clouds tabulated by Solomon etal (1987) (SRBY) are re-examined using the Boston University-FCRAO Galactic Ring Survey of 13CO J=1-0 emission. These new data provide a lower opacity tracer of molecular clouds and improved angular and spectral resolution than previous surveys of molecular line emission along the Galactic Plane. We calculate GMC masses within the SRBY cloud boundaries assuming LTE conditions throughout the cloud and a constant H2 to 13CO abundance, while accounting for the variation of the 12C/13C with Galacto-centric radius. The LTE derived masses are typically five times smaller than the SRBY virial masses. The corresponding median mass surface density of molecular hydrogen for this sample is 42 Msun/pc^2, which is significantly lower than the value derived by SRBY (median 206 Msun/pc^2) that has been widely adopted by most models of cloud evolution and star formation. This discrepancy arises from both the extrapolation by SRBY of velocity dispersion, size, and CO luminosity to the 1K antenna temperature isophote that likely overestimates the GMC masses and our assumption of constant 13CO abundance over the projected area of each cloud. Owing to the uncertainty of molecular abundances in the envelopes of clouds, the mass surface density of giant molecular clouds could be larger than the values derived from our 13CO measurements. From velocity dispersions derived from the 13CO data, we find that the coefficient of the cloud structure functions, vo=sigma_v/R^{1/2}, is not constant, as required to satisfy Larson's scaling relationships, but rather systematically varies with the surface density of the cloud as Sigma^{0.5} as expected for clouds in self-gravitational equlibrium.