Normalized to: Durand, D.
[1]
oai:arXiv.org:2003.01785 [pdf] - 2072734
Assessment of astronomical images using combined machine learning models
Submitted: 2020-03-03
We present a two-component Machine Learning (ML) based approach for
classifying astronomical images by data-quality via an examination of sources
detected in the images and image pixel values from representative sources
within those images. The first component, which uses a clustering algorithm,
creates a proper and small fraction of the image pixels to determine the
quality of the observation. The representative images (and associated tables)
are ~800 times smaller than the original images, significantly reducing the
time required to train our algorithm. The useful information in the images is
preserved, permitting them to be classified in different categories, but the
required storage is reduced. The second component, which is a deep neural
network model, classifies the representative images. Using ground-based
telescope imaging data, we demonstrate that the method can be used to separate
'usable' images from those that present some problems for scientific projects
-- such as images that were taken in sub-optimal conditions. This method uses
two different data sets as input to a deep model and provides better
performance than if we only used the images' pixel information. The method may
be used in cases where large and complex data sets should be examined using
deep models. Our automated classification approach achieves 97% agreement when
compared to classification generated via manual image inspection. We compare
our method with traditional results and show that the method improves the
results by about 10%, and also presents more comprehensive outcomes.
[2]
oai:arXiv.org:1708.09704 [pdf] - 1886369
IVOA Recommendation: HiPS - Hierarchical Progressive Survey
Submitted: 2017-08-31
This document presents HiPS, a hierarchical scheme for the description,
storage and access of sky survey data. The system is based on hierarchical
tiling of sky regions at finer and finer spatial resolution which facilitates a
progressive view of a survey, and supports multi-resolution zooming and
panning. HiPS uses the HEALPix tessellation of the sky as the basis for the
scheme and is implemented as a simple file structure with a direct indexing
scheme that leads to practical implementations.
[3]
oai:arXiv.org:1611.01312 [pdf] - 1508841
An Hierarchical Approach to Big Data
Allen, M. G.;
Fernique, P.;
Boch, T.;
Durand, D.;
Oberto, A.;
Merin, B.;
Stoehr, F.;
Genova, F.;
Pineau, F-X.;
Salgado, J.
Submitted: 2016-11-04
The increasing volumes of astronomical data require practical methods for
data exploration, access and visualisation. The Hierarchical Progressive Survey
(HiPS) is a HEALPix based scheme that enables a multi-resolution approach to
astronomy data from the individual pixels up to the whole sky. We highlight the
decisions and approaches that have been taken to make this scheme a practical
solution for managing large volumes of heterogeneous data. Early implementors
of this system have formed a network of HiPS nodes, with some 250 diverse data
sets currently available, with multiple mirror implementations for important
data sets. This hierarchical approach can be adapted to expose Big Data in
different ways. We describe how the ease of implementation, and local
customisation of the Aladin Lite embeddable HiPS visualiser have been keys for
promoting collaboration on HiPS.
[5]
oai:arXiv.org:1110.0524 [pdf] - 1886343
IVOA Recommendation: VOTable Format Definition Version 1.3
Ochsenbein, François;
Williams, Roy;
Davenhall, Clive;
Durand, Daniel;
Fernique, Pierre;
Giaretta, David;
Hanisch, Robert;
McGlynn, Tom;
Szalay, Alex;
Taylor, Mark B.;
Wicenec, Andreas
Submitted: 2011-10-03, last modified: 2016-09-13
This document describes the structures making up the VOTable standard. The
main part of this document describes the adopted part of the VOTable standard;
it is followed by appendices presenting extensions which have been proposed
and/or discussed, but which are not part of the standard.
[6]
oai:arXiv.org:1510.01561 [pdf] - 1385384
The prototype detection unit of the KM3NeT detector
KM3NeT Collaboration;
Adrián-Martínez, S.;
Ageron, M.;
Aharonian, F.;
Aiello, S.;
Albert, A.;
Ameli, F.;
Anassontzis, E. G.;
Androulakis, G. C.;
Anghinolfi, M.;
Anton, G.;
Anvar, S.;
Ardid, M.;
Avgitas, T.;
Balasi, K.;
Band, H.;
Barbarino, G.;
Barbarito, E.;
Barbato, F.;
Baret, B.;
Baron, S.;
Barrios, J.;
Belias, A.;
Berbee, E.;
Berg, A. M. van den;
Berkien, A.;
Bertin, V.;
Beurthey, S.;
van Beveren, V.;
Beverini, N.;
Biagi, S.;
Biagioni, A.;
Bianucci, S.;
Billault, M.;
Birbas, A.;
Rookhuizen, H. Boer;
Bormuth, R.;
Bouché, V.;
Bouhadef, B.;
Bourlis, G.;
Boutonnet, C.;
Bouwhuis, M.;
Bozza, C.;
Bruijn, R.;
Brunner, J.;
Cacopardo, G.;
Caillat, L.;
Calamai, M.;
Calvo, D.;
Capone, A.;
Caramete, L.;
Caruso, F.;
Cecchini, S.;
Ceres, A.;
Cereseto, R.;
Champion, C.;
Château, F.;
Chiarusi, T.;
Christopoulou, B.;
Circella, M.;
Classen, L.;
Cocimano, R.;
Coleiro, A.;
Colonges, S.;
Coniglione, R.;
Cosquer, A.;
Costa, M.;
Coyle, P.;
Creusot, A.;
Cuttone, G.;
D'Amato, C.;
D'Amico, A.;
De Bonis, G.;
De Rosa, G.;
Deniskina, N.;
Destelle, J. -J.;
Distefano, C.;
Di Capua, F.;
Donzaud, C.;
Dornic, D.;
Dorosti-Hasankiadeh, Q.;
Drakopoulou, E.;
Drouhin, D.;
Drury, L.;
Durand, D.;
Eberl, T.;
Elsaesser, D.;
Enzenhöfer, A.;
Fermani, P.;
Fusco, L. A.;
Gajanana, D.;
Gal, T.;
Galatà, S.;
Garufi, F.;
Gebyehu, M.;
Giordano, V.;
Gizani, N.;
GraciaRuiz, R.;
Graf, K.;
Grasso, R.;
Grella, G.;
Grmek, A.;
Habel, R.;
van Haren, H.;
Heid, T.;
Heijboer, A.;
Heine, E.;
Henry, S.;
Hernández-Rey, J. J.;
Herold, B.;
Hevinga, M. A.;
van der Hoek, M.;
Hofestädt, J.;
Hogenbirk, J.;
Hugon, C.;
Hößl, J.;
Imbesi, M.;
James, C. W.;
Jansweijer, P.;
Jochum, J.;
de Jong, M.;
Jongen, M.;
Kadler, M.;
Kalekin, O.;
Kappes, A.;
Kappos, E.;
Katz, U.;
Kavatsyuk, O.;
Keller, P.;
Kieft, G.;
Koffeman, E.;
Kok, H.;
Kooijman, P.;
Koopstra, J.;
Korporaal, A.;
Kouchner, A.;
Kreykenbohm, I.;
Kulikovskiy, V.;
Lahmann, R.;
Lamare, P.;
Larosa, G.;
Lattuada, D.;
Provost, H. Le;
Leismüller, K. P.;
Leisos, A.;
Lenis, D.;
Leonora, E.;
LindseyClark, M.;
Alvarez, C. D. Llorens;
Löhner, H.;
Lonardo, A.;
Loucatos, S.;
Louis, F.;
Maccioni, E.;
Mannheim, K.;
Manolopoulos, K.;
Margiotta, A.;
Mariş, O.;
Markou, C.;
Martínez-Mora, J. A.;
Martini, A.;
Masullo, R.;
Melis, K. W.;
Michael, T.;
Migliozzi, P.;
Migneco, E.;
Miraglia, A.;
Mollo, C. M.;
Mongelli, M.;
Morganti, M.;
Mos, S.;
Moudden, Y.;
Musico, P.;
Musumeci, M.;
Nicolaou, C.;
Nicolau, C. A.;
Orlando, A.;
Orzelli, A.;
Papaikonomou, A.;
Papaleo, R.;
Păvălaş, G. E.;
Peek, H.;
Pellegrino, C.;
Pellegriti, M. G.;
Perrina, C.;
Piattelli, P.;
Pikounis, K.;
Popa, V.;
Pradier, Th.;
Priede, M.;
Pühlhofer, G.;
Pulvirenti, S.;
Racca, C.;
Raffaelli, F.;
Randazzo, N.;
Rapidis, P. A.;
Razis, P.;
Real, D.;
Resvanis, L.;
Reubelt, J.;
Riccobene, G.;
Rovelli, A.;
Saldaña, M.;
Samtleben, D. F. E.;
Sanguineti, M.;
Santangelo, A.;
Sapienza, P.;
Schmelling, J.;
Schnabel, J.;
Sciacca, V.;
Sedita, M.;
Seitz, T.;
Sgura, I.;
Simeone, F.;
Sipala, V.;
Spitaleri, A.;
Spurio, M.;
Stavropoulos, G.;
Steijger, J.;
Stolarczyk, T.;
Stransky, D.;
Taiuti, M.;
Terreni, G.;
Tézier, D.;
Théraube, S.;
Thompson, L. F.;
Timmer, P.;
Trasatti, L.;
Trovato, A.;
Tselengidou, M.;
Tsirigotis, A.;
Tzamarias, S.;
Tzamariudaki, E.;
Vallage, B.;
Van Elewyck, V.;
Vermeulen, J.;
Vernin, P.;
Vicini, P.;
Viola, S.;
Vivolo, D.;
Werneke, P.;
Wiggers, L.;
Wilms, J.;
de Wolf, E.;
van Wooning, R. H. L.;
Zonca, E.;
Zornoza, J. D.;
Zúñiga, J.;
Zwart, A.
Submitted: 2015-10-06, last modified: 2015-12-23
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been
installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final
configuration will contain several hundreds of detection units. Each detection
unit is a mechanical structure anchored to the sea floor, held vertical by a
submerged buoy and supporting optical modules for the detection of Cherenkov
light emitted by charged secondary particles emerging from neutrino
interactions. This prototype string implements three optical modules with 31
photomultiplier tubes each. These optical modules were developed by the KM3NeT
Collaboration to enhance the detection capability of neutrino interactions. The
prototype detection unit was operated since its deployment in May 2014 until
its decommissioning in July 2015. Reconstruction of the particle trajectories
from the data requires a nanosecond accuracy in the time calibration. A
procedure for relative time calibration of the photomultiplier tubes contained
in each optical module is described. This procedure is based on the measured
coincidences produced in the sea by the 40K background light and can easily be
expanded to a detector with several thousands of optical modules. The time
offsets between the different optical modules are obtained using LED
nanobeacons mounted inside them. A set of data corresponding to 600 hours of
livetime was analysed. The results show good agreement with Monte Carlo
simulations of the expected optical background and the signal from atmospheric
muons. An almost background-free sample of muons was selected by filtering the
time correlated signals on all the three optical modules. The zenith angle of
the selected muons was reconstructed with a precision of about 3{\deg}.
[7]
oai:arXiv.org:1512.03248 [pdf] - 1325480
Sealed operation, and circulation and purification of gas in the HARPO
TPC
Frotin, M.;
Gros, P.;
Attié, D.;
Bernard, D.;
Dauvois, V.;
Delbart, A.;
Durand, D.;
Geerebaert, Y.;
Legand, S.;
Magnier, P.;
Poilleux, P.;
Semeniouk, I.
Submitted: 2015-12-10
HARPO is a time projection chamber (TPC) demonstrator of a gamma-ray
telescope and polarimeter in the MeV-GeV range, for a future space mission. We
present the evolution of the TPC performance over a five month sealed-mode
operation, by the analysis of cosmic-ray data, followed by the fast and
complete recovery of the initial gas properties using a lightweight gas
circulation and purification system.
[8]
oai:arXiv.org:1509.04138 [pdf] - 1938130
Cooling Tests of the NectarCAM camera for the Cherenkov Telescope Array
Moulin, E.;
Diaz, C.;
Durand, D.;
Feirreira, O.;
Fesquet, M.;
Giebels, B.;
Glicenstein, J. -F.;
Loiseau, D.;
Louis, F.;
Nunio, F.;
Rateau, S.
Submitted: 2015-09-14, last modified: 2015-09-15
The NectarCAM is a camera proposed for the medium-sized telescopes in the
framework of the Cherenkov Telescope Array (CTA), the next-generation
observatory for very-high-energy gamma-ray astronomy. The cameras are designed
to operate in an open environment and their mechanics must provide protection
for all their components under the conditions defined for the CTA observatory.
In order to operate in a stable environment and ensure the best physics
performance, each NectarCAM will be enclosed in a slightly overpressurized,
nearly air-tight, camera body, to prevent dust and water from entering. The
total power dissipation will be ~7.7 kW for a 1855-pixel camera. The largest
fraction is dissipated by the readout electronics in the modules. We present
the design and implementation of the cooling system together with the test
bench results obtained on the NectarCAM thermal demonstrator.
[10]
oai:arXiv.org:1508.06555 [pdf] - 1267007
NectarCAM : a camera for the medium size telescopes of the Cherenkov
Telescope Array
Glicenstein, J-F.;
Abril, O.;
Barrio, J-A.;
Blanch~Bigas, O.;
Bolmont, J.;
Bouyjou, F.;
Brun, P.;
Chabanne, E.;
Champion, C.;
Colonges, S.;
Corona, P.;
Delagnes, E.;
Delgado, C.;
Ginzov, C. Diaz;
Durand, D.;
Ernenwein, J-P.;
Fegan, S.;
Ferreira, O.;
Fesquet, M.;
Fiasson, A.;
Fontaine, G.;
Fouque, N.;
Gascon, D.;
Giebels, B.;
Henault, F.;
Hermel, R.;
Hoffmann, D.;
Horan, D.;
Houles, J.;
Jean, P.;
Jocou, L.;
Karkar, S.;
Knoedlseder, J.;
Kossakowski, R.;
Lamanna, G.;
LeFlour, T.;
Lenain, J-P.;
Leveque, A.;
Louis, F.;
Martinez, G.;
Moudden, Y.;
Moulin, E.;
Nayman, P.;
Nunio, F.;
Olive, J-F.;
Panazol, J-L.;
Pavy, S.;
Petrucci, P-O.;
Pierre, E.;
Prast, J.;
Punch, M.;
Ramon, P.;
Rateau, S.;
Ravel, T.;
Rosier-Lees, S.;
Sanuy, A.;
Shayduk, M.;
Sizun, P-Y.;
Sulanke, K-H.;
Tavernet, J-P.;
Tejedor~Alvarez, L-A.;
Toussenel, F.;
Vasileiadis, G.;
Voisin, V.;
Waegebert, V.;
Wischnewski, R.
Submitted: 2015-08-26
NectarCAM is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA) covering the central energy range of ~100 GeV
to ~30 TeV. It has a modular design and is based on the NECTAr chip, at the
heart of which is a GHz sampling Switched Capacitor Array and a 12-bit Analog
to Digital converter. The camera will be equipped with 265 7-photomultiplier
modules, covering a field of view of 8 degrees. Each module includes the
photomultiplier bases, high voltage supply, pre-amplifier, trigger, readout and
Ethernet transceiver. The recorded events last between a few nanoseconds and
tens of nanoseconds. The camera trigger will be flexible so as to minimize the
read-out dead-time of the NECTAr chips. NectarCAM is designed to sustain a data
rate of more than 4 kHz with less than 5\% dead time. The camera concept, the
design and tests of the various subcomponents and results of thermal and
electrical prototypes are presented. The design includes the mechanical
structure, cooling of the electronics, read-out, clock distribution, slow
control, data-acquisition, triggering, monitoring and services.
[11]
oai:arXiv.org:1505.02937 [pdf] - 1886358
MOC - HEALPix Multi-Order Coverage map Version 1.0
Submitted: 2015-05-12
This document describes the Multi-Order Coverage map method (MOC) to specify
arbitrary sky regions. The goal is to be able to provide a very fast comparison
mechanism between coverage maps. The mechanism is based on the HEALPix sky
tessellation algorithm. It is essentially a simple way to map regions of the
sky into hierarchically grouped predefined cells.
[12]
oai:arXiv.org:1505.02291 [pdf] - 1183004
Hierarchical progressive surveys. Multi-resolution HEALPix data
structures for astronomical images, catalogues, and 3-dimensional data cubes
Fernique, P.;
Allen, M. G.;
Boch, T.;
Oberto, A.;
Pineau, F-X.;
Durand, D.;
Bot, C.;
Cambresy, L.;
Derriere, S.;
Genova, F.;
Bonnarel, F.
Submitted: 2015-05-09
Scientific exploitation of the ever increasing volumes of astronomical data
requires efficient and practical methods for data access, visualisation, and
analysis. Hierarchical sky tessellation techniques enable a multi-resolution
approach to organising data on angular scales from the full sky down to the
individual image pixels. Aims. We aim to show that the Hierarchical progressive
survey (HiPS) scheme for describing astronomical images, source catalogues, and
three-dimensional data cubes is a practical solution to managing large volumes
of heterogeneous data and that it enables a new level of scientific
interoperability across large collections of data of these different data
types. Methods. HiPS uses the HEALPix tessellation of the sphere to define a
hierarchical tile and pixel structure to describe and organise astronomical
data. HiPS is designed to conserve the scientific properties of the data
alongside both visualisation considerations and emphasis on the ease of
implementation. We describe the development of HiPS to manage a large number of
diverse image surveys, as well as the extension of hierarchical image systems
to cube and catalogue data. We demonstrate the interoperability of HiPS and
Multi-Order Coverage (MOC) maps and highlight the HiPS mechanism to provide
links to the original data. Results. Hierarchical progressive surveys have been
generated by various data centres and groups for ~200 data collections
including many wide area sky surveys, and archives of pointed observations.
These can be accessed and visualised in Aladin, Aladin Lite, and other
applications. HiPS provides a basis for further innovations in the use of
hierarchical data structures to facilitate the description and statistical
analysis of large astronomical data sets.
[13]
oai:arXiv.org:1405.0839 [pdf] - 1209344
Deep sea tests of a prototype of the KM3NeT digital optical module
Adrián-Martínez, S.;
Ageron, M.;
Aharonian, F.;
Aiello, S.;
Albert, A.;
Ameli, F.;
Anassontzis, E. G.;
Anghinolfi, M.;
Anton, G.;
Anvar, S.;
Ardid, M.;
de Asmundis, R.;
Balasi, K.;
Band, H.;
Barbarino, G.;
Barbarito, E.;
Barbato, F.;
Baret, B.;
Baron, S.;
Belias, A.;
Berbee, E.;
Berg, A. M. van den;
Berkien, A.;
Bertin, V.;
Beurthey, S.;
van Beveren, V.;
Beverini, N.;
Biagi, S.;
Bianucci, S.;
Billault, M.;
Birbas, A.;
Rookhuizen, H. Boer;
Bormuth, R.;
Bouche, V.;
Bouhadef, B.;
Bourlis, G.;
Bouwhuis, M.;
Bozza, C.;
Bruijn, R.;
Brunner, J.;
Cacopardo, G.;
Caillat, L.;
Calamai, M.;
Calvo, D.;
Capone, A.;
Caramete, L.;
Caruso, F.;
Cecchini, S.;
Ceres, A.;
Cereseto, R.;
Champion, C.;
Chateau, F.;
Chiarusi, T.;
Christopoulou, B.;
Circella, M.;
Classen, L.;
Cocimano, R.;
Colonges, S.;
Coniglione, R.;
Cosquer, A.;
Costa, M.;
Coyle, P.;
Creusot, A.;
Curtil, C.;
Cuttone, G.;
D'Amato, C.;
D'Amico, A.;
De Bonis, G.;
De Rosa, G.;
Deniskina, N.;
Destelle, J. -J.;
Distefano, C.;
Donzaud, C.;
Dornic, D.;
Dorosti-Hasankiadeh, Q.;
Drakopoulou7, E.;
Drouhin, D.;
Drury, L.;
Durand, D.;
Eberl, T.;
Eleftheriadis, C.;
Elsaesser, D.;
Enzenhofer, A.;
Fermani, P.;
Fusco, L. A.;
Gajana, D.;
Gal, T.;
Galata, S.;
Gallo, F.;
Garufi, F.;
Gebyehu, M.;
Giordano, V.;
Gizani, N.;
Ruiz, R. Gracia;
Graf, K.;
Grasso, R.;
Grella, G.;
Grmek, A.;
Habel, R.;
van Haren, H.;
Heid, T.;
Heijboer, A.;
Heine, E.;
Henry, S.;
Hernandez-Rey, J. J.;
Herold, B.;
Hevinga, M. A.;
van der Hoek, M.;
Hofestadt, J.;
Hogenbirk, J.;
Hugon, C.;
Hosl, J.;
Imbesi, M.;
James, C.;
Jansweijer, P.;
Jochum, J.;
de Jong, M.;
Kadler, M.;
Kalekin, O.;
Kappes, A.;
Kappos, E.;
Katz, U.;
Kavatsyuk, O.;
Keller, P.;
Kieft, G.;
Koffeman, E.;
Kok, H.;
Kooijman, P.;
Koopstra, J.;
Korporaal, A.;
Kouchner, A.;
Koutsoukos, S.;
Kreykenbohm, I.;
Kulikovskiy, V.;
Lahmann, R.;
Lamare, P.;
Larosa, G.;
Lattuada, D.;
Provost, H. Le;
Leisos, A.;
Lenis, D.;
Leonora, E.;
Clark, M. Lindsey;
Liolios, A.;
Alvarez, C. D. Llorens;
Lohner, H.;
Presti, D. Lo;
Louis, F.;
Maccioni, E.;
Mannheim, K.;
Manolopoulos, K.;
Margiotta, A.;
Maris, O.;
Markou, C.;
Martinez-Mora, J. A.;
Martini, A.;
Masullo, R.;
Michael, T.;
Migliozzi, P.;
Migneco, E.;
Miraglia, A.;
Mollo, C.;
Mongelli, M.;
Morganti, M.;
Mos, S.;
Moudden, Y.;
Musico, P.;
Musumeci, M.;
Nicolaou, C.;
Nicolau, C. A.;
Orlando, A.;
Orzelli, A.;
Papageorgiou, K.;
Papaikonomou, A.;
Papaleo, R.;
Pavalas, G. E.;
Peek, H.;
Pellegrino, C.;
Pellegriti, M. G.;
Perrina, C.;
Petridou, C.;
Piattelli, P.;
Pikounis, K.;
Popa, V.;
Pradier, Th.;
Priede, M.;
Puhlhofer, G.;
Pulvirenti, S.;
Racca, C.;
Raffaelli, F.;
Randazzo, N.;
Rapidis, P. A.;
Razis, P.;
Real, D.;
Resvanis, L.;
Reubelt, J.;
Riccobene, G.;
Rovelli, A.;
Royon, J.;
Saldana, M.;
Samtleben, D. F. E.;
Sanguineti, M.;
Santangelo, A.;
Sapienza, P.;
Savvidis, I.;
Schmelling, J.;
Schnabel, J.;
Sedita, M.;
Seitz, T.;
Sgura, I.;
Simeone, F.;
Siotis, I.;
Sipala, V.;
Solazzo, M.;
Spitaleri, A.;
Spurio, M.;
Stavropoulos, G.;
Steijger, J.;
Stolarczyk, T.;
Stransky, D.;
Taiuti, M.;
Terreni, G.;
Tezier, D.;
Theraube, S.;
Thompson, L. F.;
Timmer, P.;
Trapierakis, H. I.;
Trasatti, L.;
Trovato, A.;
Tselengidou, M.;
Tsirigotis, A.;
Tzamarias, S.;
Tzamariudaki, E.;
Vallage, B.;
Van Elewyck, V.;
Vermeulen, J.;
Vernin, P.;
Viola, S.;
Vivolo, D.;
Werneke, P.;
Wiggers, L.;
Wilms, J.;
de Wolf, E.;
van Wooning, R. H. L.;
Yatkin, K.;
Zachariadou, K.;
Zonca, E.;
Zornoza, J. D.;
Zúñiga, J.;
Zwart, A.
Submitted: 2014-05-05, last modified: 2014-05-16
The first prototype of a photo-detection unit of the future KM3NeT neutrino
telescope has been deployed in the deep waters of the Mediterranean Sea. This
digital optical module has a novel design with a very large photocathode area
segmented by the use of 31 three inch photomultiplier tubes. It has been
integrated in the ANTARES detector for in-situ testing and validation. This
paper reports on the first months of data taking and rate measurements. The
analysis results highlight the capabilities of the new module design in terms
of background suppression and signal recognition. The directionality of the
optical module enables the recognition of multiple Cherenkov photons from the
same $^{40}$K decay and the localization bioluminescent activity in the
neighbourhood. The single unit can cleanly identify atmospheric muons and
provide sensitivity to the muon arrival directions.
[14]
oai:arXiv.org:1310.1713 [pdf] - 728971
Status of the technologies for the production of the Cherenkov Telescope
Array (CTA) mirrors
Pareschi, G.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
de Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Förster, A.;
Garczarczyk, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
Mandat, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-10-07
The Cherenkov Telescope Array (CTA) is the next generation very high-energy
gamma-ray observatory, with at least 10 times higher sensitivity than current
instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov
Telescopes (IACTs) operated in array-mode and divided into three size classes:
large, medium and small telescopes. The total reflective surface could be up to
10,000 m2 requiring unprecedented technological efforts. The properties of the
reflector directly influence the telescope performance and thus constitute a
fundamental ingredient to improve and maintain the sensitivity. The R&D status
of lightweight, reliable and cost-effective mirror facets for the CTA telescope
reflectors for the different classes of telescopes is reviewed in this paper.
[16]
oai:arXiv.org:1307.4563 [pdf] - 1943147
Mirror Development for the Cherenkov Telescope Array
Förster, A.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
De Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
MANDAT, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pareschi, G.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
Van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-07-17
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high
energy gamma-ray astronomy. It will consist of several tens of telescopes of
different sizes, with a total mirror area of up to 10,000 square meters. Most
mirrors of current installations are either polished glass mirrors or
diamond-turned aluminium mirrors, both labour intensive technologies. For CTA,
several new technologies for a fast and cost-efficient production of
light-weight and reliable mirror substrates have been developed and industrial
pre-production has started for most of them. In addition, new or improved
aluminium-based and dielectric surface coatings have been developed to increase
the reflectance over the lifetime of the mirrors compared to those of current
Cherenkov telescope instruments.
[17]
oai:arXiv.org:1301.6988 [pdf] - 1159350
Composite mirror facets for ground based gamma ray astronomy
Submitted: 2013-01-29, last modified: 2013-01-30
Composite mirrors for gamma-ray astronomy have been developed to fulfill the
specifications required for the next generation of Cherenkov telescopes
represented by CTA (Cherenkov Telescope Array). In addition to the basic
requirements on focus and reflection efficiency, the mirrors have to be stiff,
lightweight, durable and cost efficient. In this paper, the technology
developed to produce such mirrors is described, as well as some tests that have
been performed to validate them. It is shown that these mirrors comply with the
needs of CTA, making them good candidates for use on a significant part of the
array.
[18]
oai:arXiv.org:1111.1758 [pdf] - 1886347
IVOA Recommendation: Observation Data Model Core Components and its
Implementation in the Table Access Protocol Version 1.0
Louys, Mireille;
Bonnarel, Francois;
Schade, David;
Dowler, Patrick;
Micol, Alberto;
Durand, Daniel;
Tody, Doug;
Michel, Laurent;
Salgado, Jesus;
Chilingarian, Igor;
Rino, Bruno;
Santander-Vela, J. D.;
Skoda, Petr
Submitted: 2011-11-07, last modified: 2011-11-14
This document defines the core components of the Observation data model that
are necessary to perform data discovery when querying data centers for
observations of interest. It exposes use-cases to be carried out, explains the
model and provides guidelines for its implementation as a data access service
based on the Table Access Protocol (TAP). It aims at providing a simple model
easy to understand and to implement by data providers that wish to publish
their data into the Virtual Observatory. This interface integrates data
modeling and data access aspects in a single service and is named ObsTAP. It
will be referenced as such in the IVOA registries. There will be a separate
document to cover the full Observation data model. In this document, the
Observation Data Model Core Components (ObsCoreDM) defines the core components
of queryable metadata required for global discovery of observational data. It
is meant to allow a single query to be posed to TAP services at multiple sites
to perform global data discovery without having to understand the details of
the services present at each site. It defines a minimal set of basic metadata
and thus allows for a reasonable cost of implementation by data providers. The
combination of the ObsCoreDM with TAP is referred to as an ObsTAP service. As
with most of the VO Data Models, ObsCoreDM makes use of STC, Utypes, Units and
UCDs. The ObsCoreDM can be serialized as a VOTable. ObsCoreDM can make
reference to more complete data models such as ObsProvDM (the Observation
Provenance Data Model, to come), Characterisation DM, Spectrum DM or Simple
Spectral Line Data Model (SSLDM).
[19]
oai:arXiv.org:0910.0293 [pdf] - 901922
A Population of Compact Elliptical Galaxies Detected with the Virtual
Observatory
Submitted: 2009-10-01
Compact elliptical galaxies are characterized by small sizes and high stellar
densities. They are thought to form through tidal stripping of massive
progenitors. However, only a handful of them were known, preventing us from
understanding the role played by this mechanism in galaxy evolution. We present
a population of 21 compact elliptical galaxies gathered with the Virtual
Observatory. Follow-up spectroscopy and data mining, using high-resolution
images and large databases, show that all the galaxies exhibit old metal-rich
stellar populations different from those of dwarf elliptical galaxies of
similar masses but similar to those of more massive early-type galaxies,
supporting the tidal stripping scenario. Their internal properties are
reproduced by numerical simulations, which result in compact dynamically hot
remnants resembling the galaxies in our sample.
[20]
oai:arXiv.org:astro-ph/9812159 [pdf] - 104266
QSO hosts and environments at z=0.9 to 4.2: JHK images with adaptive
optics
Submitted: 1998-12-08
We have observed nine QSOs with redshifts 0.85 to 4.16 at near-IR wavelengths
with the adaptive optics bonnette of the Canada-France-Hawaii telescope.
Exposure times ranged from 1500 to 24000s (mostly near 7000s) in J, H, or K
bands, with pixels 0.035 arcsec on the sky. The FWHM of the co-added images at
the location of the quasars are typically 0.16 arcsec. Including another QSO
published previously, we find associated QSO structure in at least eight of ten
objects, including the QSO at z = 4.16. The structures seen in all cases
include long faint features which appear to be tidal tails. In four cases we
have also resolved the QSO host galaxy, but find them to be smooth and
symmetrical: future PSF removal may expand this result. Including one object
previously reported, of the nine objects with more extended structure, five are
radio-loud, and all but one of these appear to be in a dense small group of
compact galaxy companions. The radio-quiet objects do not occupy the same dense
environments, as seen in the NIR. In this small sample we do not find any
apparent trends of these properties with redshift, over the range 0.8 < z <
2.4. The colors of the host galaxies and companions are consistent with young
stellar populations at the QSO redshift. Our observations suggest that adaptive
optic observations in the visible region will exhibit luminous signatures of
the substantial star-formation activity that must be occurring.