The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT). It combines a diffraction limited imager and an integral field spectrograph. This paper focuses on the electrical system of IRIS. With an instrument of the size and complexity of IRIS we face several electrical challenges. Many of the major controllers must be located directly on the cryostat to reduce cable lengths, and others require multiple bulkheads and must pass through a large cable wrap. Cooling and vibration due to the rotation of the instrument are also major challenges. We will present our selection of cables and connectors for both room temperature and cryogenic environments, packaging in the various cabinets and enclosures, and techniques for complex bulkheads including for large detectors at the cryostat wall.

The InfraRed Imaging Spectrograph (IRIS) is the first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope (TMT). IRIS includes three natural guide star (NGS) On-Instrument Wavefront Sensors (OIWFS) to measure tip/tilt and focus errors in the instrument focal plane. NFIRAOS also has an internal natural guide star wavefront sensor, and IRIS and NFIRAOS must precisely coordinate the motions of their wavefront sensor positioners to track the locations of NGSs while the telescope is dithering (offsetting the telescope to cover more area), to avoid a costly re-acquisition time penalty. First, we present an overview of the sequencing strategy for all of the involved subsystems. We then predict the motion of the telescope during dithers based on finite-element models provided by TMT, and finally analyze latency and jitter issues affecting the propagation of position demands from the telescope control system to individual motor controllers.

Infrared Imaging Spectrograph (IRIS) is the first light instrument for the Thirty Meter Telescope (TMT) that consists of a near-infrared (0.84 to 2.4 micron) imager and integral field spectrograph (IFS) which operates at the diffraction-limit utilizing the Narrow-Field Infrared Adaptive Optics System (NFIRAOS). The imager will have a 34 arcsec x 34 arcsec field of view with 4 milliarcsecond (mas) pixels. The IFS consists of a lenslet array and slicer, enabling four plate scales from 4 mas to 50 mas, multiple gratings and filters, which in turn will operate hundreds of individual modes. IRIS, operating in concert with NFIRAOS will pose many challenges for the data reduction system (DRS). Here we present the updated design of the real-time and post-processing DRS. The DRS will support two modes of operation of IRIS: (1) writing the raw readouts sent from the detectors and performing the sampling on all of the readouts for a given exposure to create a raw science frame; and (2) reduction of data from the imager, lenslet array and slicer IFS. IRIS is planning to save the raw readouts for a given exposure to enable sophisticated processing capabilities to the end users, such as the ability to remove individual poor seeing readouts to improve signal-to-noise, or from advanced knowledge of the point spread function (PSF). The readout processor (ROP) is a key part of the IRIS DRS design for writing and sampling of the raw readouts into a raw science frame, which will be passed to the TMT data archive. We discuss the use of sub-arrays on the imager detectors for saturation/persistence mitigation, on-detector guide windows, and fast readout science cases (< 1 second).

The InfraRed Imaging Spectrograph (IRIS) is a first-light instrument for the Thirty Meter Telescope (TMT) that will be used to sample the corrected adaptive optics field by NFIRAOS with a near-infrared (0.8 - 2.4 $\mu$m) imaging camera and Integral Field Spectrograph (IFS). In order to understand the science case specifications of the IRIS instrument, we use the IRIS data simulator to characterize photometric precision and accuracy of the IRIS imager. We present the results of investigation into the effects of potential ghosting in the IRIS optical design. Each source in the IRIS imager field of view results in ghost images on the detector from IRIS's wedge filters, entrance window, and Atmospheric Dispersion Corrector (ADC) prism. We incorporated each of these ghosts into the IRIS simulator by simulating an appropriate magnitude point source at a specified pixel distance, and for the case of the extended ghosts redistributing flux evenly over the area specified by IRIS's optical design. We simulate the ghosting impact on the photometric capabilities, and found that ghosts generally contribute negligible effects on the flux counts for point sources except for extreme cases where ghosts coalign with a star of $\Delta$m$>$2 fainter than the ghost source. Lastly, we explore the photometric precision and accuracy for single sources and crowded field photometry on the IRIS imager.

We analyze the 2011 HST/COS spectrum of the Seyfert 1 galaxy NGC 3516, which demonstrates clear changes in one of the intrinsic absorption troughs (component 5), slight evidence of change in a second trough (component 6), and the appearance of a new absorption trough (component 9). We interpret both the changes and the appearance of the new trough as bulk motion across the line of sight. The implied lower limit on the transverse velocity of component 5 is 360 km/s, compared to the earlier 2001 HST/STIS spectrum, while the lower limits for components 6 and 9 are 920 km/s, based on 2009 FUSE data. Component 5 also exhibits a shift in velocity centroid. This is only the second known case of this behavior in a Seyfert galaxy. Due to the high quality of the HST/COS spectrum, we identify a previously undetected trough due to an excited state of Si II for component 1. In combination with the resonance trough of Si II and photoionization modeling, we directly determine the distance of the component 1 outflow to be 67.2 pc.

Using the Gemini Planet Imager (GPI) located at Gemini South, we measured the near-infrared (1.0-2.4 micron) spectrum of the planetary companion to the nearby, young star $\beta$ Pictoris. We compare the spectrum obtained with currently published model grids and with known substellar objects and present the best matching models as well as the best matching observed objects. Comparing the empirical measurement of the bolometric luminosity to evolutionary models, we find a mass of $12.9\pm0.2$ $\mathcal{M}_\mathrm{Jup}$, an effective temperature of $1724\pm15$ K, a radius of $1.46\pm0.01$ $\mathcal{R}_\mathrm{Jup}$, and a surface gravity of $\log g = 4.18\pm0.01$ [dex] (cgs). The stated uncertainties are statistical errors only, and do not incorporate any uncertainty on the evolutionary models. Using atmospheric models, we find an effective temperature of $1700-1800$ K and a surface gravity of $\log g = 3.5$-$4.0$ [dex] depending upon model. These values agree well with other publications and with "hot-start" predictions from planetary evolution models. Further, we find that the spectrum of $\beta$ Pic b best matches a low-surface gravity L2$\pm$1 brown dwarf. Finally comparing the spectrum to field brown dwarfs we find the the spectrum best matches 2MASS J04062677-381210 and 2MASS J03552337+1133437.

The Thirty Meter Telescope (TMT) first light instrument IRIS (Infrared Imaging Spectrograph) will complete its preliminary design phase in 2016. The IRIS instrument design includes a near-infrared (0.85 - 2.4 micron) integral field spectrograph (IFS) and imager that are able to conduct simultaneous diffraction-limited observations behind the advanced adaptive optics system NFIRAOS. The IRIS science cases have continued to be developed and new science studies have been investigated to aid in technical performance and design requirements. In this development phase, the IRIS science team has paid particular attention to the selection of filters, gratings, sensitivities of the entire system, and science cases that will benefit from the parallel mode of the IFS and imaging camera. We present new science cases for IRIS using the latest end-to-end data simulator on the following topics: Solar System bodies, the Galactic center, active galactic nuclei (AGN), and distant gravitationally-lensed galaxies. We then briefly discuss the necessity of an advanced data management system and data reduction pipeline.

The InfraRed Imaging Spectrograph (IRIS) will be a first-light client instrument for the Narrow Field Infrared Adaptive Optics System (NFIRAOS) on the Thirty Meter Telescope. IRIS includes three configurable tip/tilt (TT) or tip/tilt/focus (TTF) On-Instrument Wavefront Sensors (OIWFS). These sensors are positioned over natural guide star (NGS) asterisms using movable polar-coordinate pick-off arms (POA) that patrol an approximately 2-arcminute circular field-of-view (FOV). The POAs are capable of colliding with one another, so an algorithm for coordinated motion that avoids contact is required. We have adopted an approach in which arm motion is evaluated using the gradient descent of a scalar potential field that includes an attractive component towards the goal configuration (locations of target stars), and repulsive components to avoid obstacles (proximity to adjacent arms). The resulting vector field is further modified by adding a component transverse to the repulsive gradient to avoid problematic local minima in the potential. We present path planning simulations using this computationally inexpensive technique, which exhibit smooth and efficient trajectories.

TMT has defined the accuracy to be achieved for both absolute and differential astrometry in its top-level requirements documents. Because of the complexities of different types of astrometric observations, these requirements cannot be used to specify system design parameters directly. The TMT astrometry working group therefore developed detailed astrometry error budgets for a variety of science cases. These error budgets detail how astrometric errors propagate through the calibration, observing and data reduction processes. The budgets need to be condensed into sets of specific requirements that can be used by each subsystem team for design purposes. We show how this flowdown from error budgets to design requirements is achieved for the case of TMT's first-light Infrared Imaging Spectrometer (IRIS) instrument.

The InfraRed Imaging Spectrograph (IRIS) will be the first light adaptive optics instrument on the Thirty Meter Telescope (TMT). IRIS is being built by a collaboration between Caltech, the University of California, NAOJ and NRC Herzberg. We present novel aspects of the Support Structure, Rotator and On-Instrument Wavefront Sensor systems being developed at NRC Herzberg. IRIS is suspended from the bottom port of the Narrow Field Infrared Adaptive Optics System (NFIRAOS), and provides its own image de-rotation to compensate for sidereal rotation of the focal plane. This arrangement is a challenge because NFIRAOS is designed to host two other science instruments, which imposes strict mass requirements on IRIS. We have been tasked with keeping the instrument mass under seven tonnes which has resulted in a mass reduction of 30 percent for the support structure and rotator compared to the most recent IRIS designs. To accomplish this goal, while still being able to withstand earthquakes, we developed a new design with composite materials. As IRIS is a client instrument of NFIRAOS, it benefits from NFIRAOS's superior AO correction. IRIS assists this correction by sensing low-order aberrations with an On-Instrument Wavefront Sensor (OIWFS). The OIWFS consists of three independently positioned natural guide star wavefront sensors that patrol a 2-arcminute field of view. We expect tip-tilt measurements from faint stars within the IRIS imager focal plane will further stabilize the delivered image quality. We describe how the use of On-Detector Guide Windows (ODGWs) in the IRIS imager can be incorporated into the AO correction. Finally, we present our strategies for acquiring and tracking sources with this complex AO system, and for mitigating and measuring the various potential sources of image blur and misalignment due to properties of the mechanical structure and interfaces. (Abridged)

IRIS (InfraRed Imaging Spectrograph) is the diffraction-limited first light instrument for the Thirty Meter Telescope (TMT) that consists of a near-infrared (0.84 to 2.4 $\mu$m) imager and integral field spectrograph (IFS). The IFS makes use of a lenslet array and slicer for spatial sampling, which will be able to operate in 100's of different modes, including a combination of four plate scales from 4 milliarcseconds (mas) to 50 mas with a large range of filters and gratings. The imager will have a field of view of 34$\times$34 arcsec$^{2}$ with a plate scale of 4 mas with many selectable filters. We present the preliminary design of the data reduction system (DRS) for IRIS that need to address all of these observing modes. Reduction of IRIS data will have unique challenges since it will provide real-time reduction and analysis of the imaging and spectroscopic data during observational sequences, as well as advanced post-processing algorithms. The DRS will support three basic modes of operation of IRIS; reducing data from the imager, the lenslet IFS, and slicer IFS. The DRS will be written in Python, making use of open-source astronomical packages available. In addition to real-time data reduction, the DRS will utilize real-time visualization tools, providing astronomers with up-to-date evaluation of the target acquisition and data quality. The quicklook suite will include visualization tools for 1D, 2D, and 3D raw and reduced images. We discuss the overall requirements of the DRS and visualization tools, as well as necessary calibration data to achieve optimal data quality in order to exploit science cases across all cosmic distance scales.

IRIS is a near-infrared (0.84 to 2.4 microns) integral field spectrograph and wide-field imager being developed for first light with the Thirty Meter (TMT). It mounts to the advanced optics (AO) system NFIRAOS and has integrated on-instrument wavefront sensors (OIWFS) to achieve diffraction-limited spatial resolution at wavelengths longer than 1 micron. With moderate spectral resolution (R ~4,000 - 8,000) and large bandpass over a continuous field of view, IRIS will open new opportunities in virtually every area of astrophysical science. It will be able to resolve surface features tens of kilometers across Titan, while also mapping the distant galaxies at the scale of an individual star forming region. This paper summarizes the entire design and capabilities, and includes the results from the nearly completed preliminary design phase.

We conduct a spectroscopic search of quasars observed by the Sloan Digital Sky Survey (SDSS) with broad absorption line (BAL) troughs due to Mg II and troughs due to Fe II that simultaneously exhibit strong Balmer narrow emission lines (NELs). We find that in a redshift range of 0.4 less than or equal to z less than or equal to 0.9 approximately 23 of the 70 Mg II BALs and 4 of a subset of 15 Fe II BALs exhibit strong Balmer emission. We also find significant fractions of Mg II BALs (approximately 23%) and those Mg II BALs with Fe II troughs (approximately 27%) have strong continuum reddening, E(B - V) greater than or equal to 0.1. From measurements of the Balmer decrement in three objects, we find similarly significant reddening of the NEL region in three of the four objects; the NELs in the fourth object are not measurable. We also include one object in this study not taken from the SDSS sample that shows Fe II absorption and strong narrow emission, but due to measurement uncertainty and low continuum reddening the comparison is consistent but inconclusive. We find a trend in both the Mg II and Fe II BAL samples between the NEL reddening and continuum reddening. Because the narrow line reddening is consistent with the continuum reddening in every object in the two SDSS samples, it suggests that the reddening sources in these objects likely exist at larger radial distances than the narrow line regions from the central nucleus.

We present $H$-band observations of $\beta$ Pic with the Gemini Planet Imager's (GPI's) polarimetry mode that reveal the debris disk between ~0.3" (~6 AU) and ~1.7" (~33 AU), while simultaneously detecting $\beta$ Pic $b$. The polarized disk image was fit with a dust density model combined with a Henyey-Greenstein scattering phase function. The best fit model indicates a disk inclined to the line of sight ($\phi=85.27{\deg}^{+0.26}_{-0.19}$) with a position angle $\theta_{PA}=30.35{\deg}^{+0.29}_{-0.28}$ (slightly offset from the main outer disk, $\theta_{PA}\approx29{\deg}$), that extends from an inner disk radius of $23.6^{+0.9}_{-0.6}$ AU to well outside GPI's field of view. In addition, we present an updated orbit for $\beta$ Pic $b$ based on new astrometric measurements taken in GPI's spectroscopic mode spanning 14 months. The planet has a semi-major axis of $a=9.2^{+1.5}_{-0.4}$AU, with an eccentricity $e\leq 0.26$. The position angle of the ascending node is $\Omega=31.75{\deg}\pm0.15$, offset from both the outer main disk and the inner disk seen in the GPI image. The orbital fit constrains the stellar mass of $\beta$ Pic to $1.60\pm0.05 M_{\odot}$. Dynamical sculpting by $\beta$ Pic $b$ cannot easily account for the following three aspects of the inferred disk properties: 1) the modeled inner radius of the disk is farther out than expected if caused by $\beta$ Pic b; 2) the mutual inclination of the inner disk and $\beta$ Pic $b$ is $4{\deg}$, when it is expected to be closer to zero; and 3) the aspect ratio of the disk ($h_0 = 0.137^{+0.005}_{-0.006}$) is larger than expected from interactions with $\beta$ Pic $b$ or self-stirring by the disk's parent bodies.

During the first-light run of the Gemini Planet Imager (GPI) we obtained K-band spectra of exoplanets HR 8799 c and d. Analysis of the spectra indicates that planet d may be warmer than planet c. Comparisons to recent patchy cloud models and previously obtained observations over multiple wavelengths confirm that thick clouds combined with horizontal variation in the cloud cover generally reproduce the planets' spectral energy distributions. When combined with the 3 to 4 um photometric data points, the observations provide strong constraints on the atmospheric methane content for both planets. The data also provide further evidence that future modeling efforts must include cloud opacity, possibly including cloud holes, disequilibrium chemistry, and super-solar metallicity.

The Gemini Planet Imager (GPI) entered on-sky commissioning phase, and had its First Light at the Gemini South telescope in November 2013. Meanwhile, the fast loops for atmospheric correction of the Extreme Adaptive Optics (XAO) system have been closed on many dozen stars at different magnitudes (I=4-8), elevation angles and a variety of seeing conditions, and a stable loop performance was achieved from the beginning. Ultimate contrast performance requires a very low residual wavefront error (design goal 60 nm RMS), and optimization of the planet finding instrument on different ends has just begun to deepen and widen its dark hole region. Laboratory raw contrast benchmarks are in the order of 10^-6 or smaller. In the telescope environment and in standard operations new challenges are faced (changing gravity, temperature, vibrations) that are tackled by a variety of techniques such as Kalman filtering, open-loop models to keep alignment to within 5 mas, speckle nulling, and a calibration unit (CAL). The CAL unit was especially designed by the Jet Propulsion Laboratory to control slowly varying wavefront errors at the focal plane of the apodized Lyot coronagraph by the means of two wavefront sensors: 1) a 7x7 low order Shack-Hartmann SH wavefront sensor (LOWFS), and 2) a special Mach-Zehnder interferometer for mid-order spatial frequencies (HOWFS) - atypical in that the beam is split in the focal plane via a pinhole but recombined in the pupil plane with a beamsplitter. The original design goal aimed for sensing and correcting on a level of a few nm which is extremely challenging in a telescope environment. This paper focuses on non-common path low order wavefront correction as achieved through the CAL unit on sky. We will present the obtained results as well as explain challenges that we are facing.

Using the recently installed Gemini Planet Imager (GPI), we have taken the first H-band spectrum of the planetary companion to the nearby young star beta Pictoris. GPI is designed to image and provide low-resolution spectra of Jupiter sized, self-luminous planetary companions around young nearby stars. These observations were taken covering the H-band (1.65 microns). The spectrum has a resolving power of $\sim$ 45 and demonstrates the distinctive triangular shape of a cool substellar object with low surface gravity. Using atmospheric models, we find an effective temperature of $1650 \pm 50$ K and a surface gravity of $\log(g) = 4.0 \pm 0.25$ (cgs units). These values agree well with predictions from planetary evolution models for a gas giant with mass between 10 and 12 $M_{\rm Jup}$ and age between 10 and 20 Myrs.

We present an overview of the design of IRIS, an infrared (0.84 - 2.4 micron) integral field spectrograph and imaging camera for the Thirty Meter Telescope (TMT). With extremely low wavefront error (<30 nm) and on-board wavefront sensors, IRIS will take advantage of the high angular resolution of the narrow field infrared adaptive optics system (NFIRAOS) to dissect the sky at the diffraction limit of the 30-meter aperture. With a primary spectral resolution of 4000 and spatial sampling starting at 4 milliarcseconds, the instrument will create an unparalleled ability to explore high redshift galaxies, the Galactic center, star forming regions and virtually any astrophysical object. This paper summarizes the entire design and basic capabilities. Among the design innovations is the combination of lenslet and slicer integral field units, new 4Kx4k detectors, extremely precise atmospheric dispersion correction, infrared wavefront sensors, and a very large vacuum cryogenic system.

The first light instrument on the Thirty Meter Telescope (TMT) project will be the InfraRed Imaging Spectrograph (IRIS). IRIS will be mounted on a bottom port of the facility AO instrument NFIRAOS. IRIS will report guiding information to the NFIRAOS through the On-Instrument Wavefront Sensor (OIWFS) that is part of IRIS. This will be in a self-contained compartment of IRIS and will provide three deployable wavefront sensor probe arms. This entire unit will be rotated to provide field de-rotation. Currently in our preliminary design stage our efforts have included: prototyping of the probe arm to determine the accuracy of this critical component, handling cart design and reviewing different types of glass for the atmospheric dispersion.

We present the first results from the polarimetry mode of the Gemini Planet Imager (GPI), which uses a new integral field polarimetry architecture to provide high contrast linear polarimetry with minimal systematic biases between the orthogonal polarizations. We describe the design, data reduction methods, and performance of polarimetry with GPI. Point spread function subtraction via differential polarimetry suppresses unpolarized starlight by a factor of over 100, and provides sensitivity to circumstellar dust reaching the photon noise limit for these observations. In the case of the circumstellar disk around HR 4796A, GPI's advanced adaptive optics system reveals the disk clearly even prior to PSF subtraction. In polarized light, the disk is seen all the way in to its semi-minor axis for the first time. The disk exhibits surprisingly strong asymmetry in polarized intensity, with the west side >9 times brighter than the east side despite the fact that the east side is slightly brighter in total intensity. Based on a synthesis of the total and polarized intensities, we now believe that the west side is closer to us, contrary to most prior interpretations. Forward scattering by relatively large silicate dust particles leads to the strong polarized intensity on the west side, and the ring must be slightly optically thick in order to explain the lower brightness in total intensity there. These findings suggest that the ring is geometrically narrow and dynamically cold, perhaps shepherded by larger bodies in the same manner as Saturn's F ring.

An Atmospheric Dispersion Corrector (ADC) uses a double-prism arrangement to nullify the vertical chromatic dispersion introduced by the atmosphere at non-zero zenith distances. The ADC installed in the Gemini Planet Imager (GPI) was first tested in August 2012 while the instrument was in the laboratory. GPI was installed at the Gemini South telescope in August 2013 and first light occurred later that year on November 11th. In this paper, we give an overview of the characterizations and performance of this ADC unit obtained in the laboratory and on sky, as well as the structure of its control software.

The Gemini Planet Imager (GPI) is a next-generation, facility instrument currently being commissioned at the Gemini South observatory. GPI combines an extreme adaptive optics system and integral field spectrograph (IFS) with an apodized-pupil Lyot coronagraph (APLC) producing an unprecedented capability for directly imaging and spectroscopically characterizing extrasolar planets. GPI's operating goal of $10^{-7}$ contrast requires very precise alignments between the various elements of the coronagraph (two pupil masks and one focal plane mask) and active control of the beam path throughout the instrument. Here, we describe the techniques used to automatically align GPI and maintain the alignment throughout the course of science observations. We discuss the particular challenges of maintaining precision alignments on a Cassegrain mounted instrument and strategies that we have developed that allow GPI to achieve high contrast even in poor seeing conditions.

The Gemini Planet Imager (GPI) is a complex optical system designed to directly detect the self-emission of young planets within two arcseconds of their host stars. After suppressing the starlight with an advanced AO system and apodized coronagraph, the dominant residual contamination in the focal plane are speckles from the atmosphere and optical surfaces. Since speckles are diffractive in nature their positions in the field are strongly wavelength dependent, while an actual companion planet will remain at fixed separation. By comparing multiple images at different wavelengths taken simultaneously, we can freeze the speckle pattern and extract the planet light adding an order of magnitude of contrast. To achieve a bandpass of 20%, sufficient to perform speckle suppression, and to observe the entire two arcsecond field of view at diffraction limited sampling, we designed and built an integral field spectrograph with extremely low wavefront error and almost no chromatic aberration. The spectrograph is fully cryogenic and operates in the wavelength range 1 to 2.4 microns with five selectable filters. A prism is used to produce a spectral resolution of 45 in the primary detection band and maintain high throughput. Based on the OSIRIS spectrograph at Keck, we selected to use a lenslet-based spectrograph to achieve an rms wavefront error of approximately 25 nm. Over 36,000 spectra are taken simultaneously and reassembled into image cubes that have roughly 192x192 spatial elements and contain between 11 and 20 spectral channels. The primary dispersion prism can be replaced with a Wollaston prism for dual polarization measurements. The spectrograph also has a pupil-viewing mode for alignment and calibration.

The Gemini Planet Imager is an extreme AO instrument with an integral field spectrograph (IFS) operating in Y, J, H, and K bands. Both the Gemini telescope and the GPI instrument are very complex systems. Our goal is that the combined telescope and instrument system may be run by one observer operating the instrument, and one operator controlling the telescope and the acquisition of light to the instrument. This requires a smooth integration between the two systems and easily operated control interfaces. We discuss the definition of the software and hardware interfaces, their implementation and testing, and the integration of the instrument with the telescope environment.

The Gemini Planet Imager (GPI) is an "extreme" adaptive optics coronagraph system that is now on the Gemini South telescope in Chile. This instrument is composed of three different systems that historically have been separate instruments. These systems are the extreme Adaptive Optics system, with deformable mirrors, including a high-order 64x64 element MEMS system; the Science Instrument, which is a near-infrared integral field spectrograph; and the Calibration system, a precision IR wavefront sensor that also holds key coronagraph components. Each system coordinates actions that require precise timing. The observatory is responsible for starting these actions and has typically done this asynchronously across independent systems. Despite this complexity we strived to provide an interface that is as close to a one-button approach as possible. This paper will describe the sequencing of these systems both internally and externally through the observatory.

The Gemini Planet Imager (GPI) is a dedicated facility for directly imaging and spectroscopically characterizing extrasolar planets. It combines a very high-order adaptive optics system, a diffraction-suppressing coronagraph, and an integral field spectrograph with low spectral resolution but high spatial resolution. Every aspect of GPI has been tuned for maximum sensitivity to faint planets near bright stars. During first light observations, we achieved an estimated H band Strehl ratio of 0.89 and a 5-sigma contrast of $10^6$ at 0.75 arcseconds and $10^5$ at 0.35 arcseconds. Observations of Beta Pictoris clearly detect the planet, Beta Pictoris b, in a single 60-second exposure with minimal post-processing. Beta Pictoris b is observed at a separation of $434 \pm 6$ milli-arcseconds and position angle $211.8 \pm 0.5$ deg. Fitting the Keplerian orbit of Beta Pic b using the new position together with previous astrometry gives a factor of three improvement in most parameters over previous solutions. The planet orbits at a semi-major axis of $9.0^{+0.8}_{-0.4}$ AU near the 3:2 resonance with the previously-known 6 AU asteroidal belt and is aligned with the inner warped disk. The observations give a 4% posterior probability of a transit of the planet in late 2017.

We present a method for computing uncertainties in spectral models, i.e. level populations, line emissivities, and emission line ratios, based upon the propagation of uncertainties originating from atomic data. We provide analytic expressions, in the form of linear sets of algebraic equations, for the coupled uncertainties among all levels. These equations can be solved efficiently for any set of physical conditions and uncertainties in the atomic data. We illustrate our method applied to spectral models of O III and Fe II and discuss the impact of the uncertainties on atomic systems under different physical conditions. As to intrinsic uncertainties in theoretical atomic data, we propose that these uncertainties can be estimated from the dispersion in the results from various independent calculations. This technique provides excellent results for the uncertainties in A-values of forbidden transitions in [Fe II].

We present a study of Broad Absorption Line (BAL) quasar outflows that show S IV ?1063 and S IV* ?1073 troughs. The fractional abundance of S IV and C IV peak at similar value of the ionization parameter, implying that they arise from the same physical component of the outflow. Detection of the S IV* troughs will allow us to determine the distance to this gas with higher resolution and higher signal-to-noise spectra, therefore providing the distance and energetics of the ubiquitous C IV BAL outflows. In our bright sample of 156 SDSS quasars 14% show C IV and 1.9% S IV troughs, which is consistent with a fainter magnitude sample with twice as many objects. One object in the fainter sample shows evidence of a broad S IV trough without any significant trough present from the excited state line, which implies that this outflow could be at a distance of several kpc. Given the fractions of C IV and S IV, we establish firm limits on the global covering factor on S IV that ranges from 2.8% to 21% (allowing for the k-correction). Comparison of the expected optical depth for these ions with their detected percentage suggests that these species arise from common outflows with a covering factor closer to the latter.

We present analysis of the UV-spectrum of the low-z AGN IRAS-F22456-5125 obtained with the Cosmic Origins Spectrograph on board the Hubble Space Telescope. The spectrum reveals six main kinematic components, spanning a range of velocities of up to 800 km s-1, which for the first time are observed in troughs associated with CII, CIV, NV, SiII, SiIII, SiIV and SIV. We also obtain data on the OVI troughs, which we compare to those available from an earlier FUSE epoch. Column densities measured from these ions allow us to derive a well-constrained photoionization solution for each outflow component. Two of these kinematic components show troughs associated with transitions from excited states of SiII\ and CII. The number density inferred from these troughs, in combination with the deduced ioinization parameter, allows us to determine the distance to these outflow components from the central source. We find these components to be at a distance of ~ 10 kpc. The distances and the number densities derived are consistent with the outflow being part of a galactic wind.

We present new Hubble Space Telescope (HST)/Cosmic Origins Spectrograph observations of the Narrow-Line Seyfert 1 galaxy NGC 4051. These data were obtained as part of a coordinated observing program including X-ray observations with the Chandra/High Energy Transmission Grating (HETG) Spectrometer and Suzaku. We detected nine kinematic components of UV absorption, which were previously identified using the HST/Space Telescope Imaging Spectrograph. None of the absorption components showed evidence for changes in column density or profile within the \sim 10 yr between the STIS and COS observations, which we interpret as evidence of 1) saturation, for the stronger components, or 2) very low densities, i.e., n_H < 1 cm^-3, for the weaker components. After applying a +200 km s^-1 offset to the HETG spectrum, we found that the radial velocities of the UV absorbers lay within the O VII profile. Based on photoionization models, we suggest that, while UV components 2, 5 and 7 produce significant O VII absorption, the bulk of the X-ray absorption detected in the HETG analysis occurs in more highly ionized gas. Moreover, the mass loss rate is dominated by high ionization gas which lacks a significant UV footprint.

We present absorption line analysis of the outflow in the quasar IRAS F04250-5718. Far-ultraviolet data from the Cosmic Origins Spectrograph onboard the Hubble Space Telescope reveal intrinsic narrow absorption lines from high ionization ions (e.g., C IV, N V, and O VI) as well as low ionization ions (e.g., C II and Si III). We identify three kinematic components with central velocities ranging from ~-50 to ~-230 km/s. Velocity dependent, non-black saturation is evident from the line profiles of the high ionization ions. From the non-detection of absorption from a metastable level of C II, we are able to determine that the electron number density in the main component of the outflow is < 30 per cubic cm. Photoionization analysis yields an ionization parameter log U ~ -1.6 +/- 0.2, which accounts for changes in the metallicity of the outflow and the shape of the incident spectrum. We also consider solutions with two ionization parameters. If the ionization structure of the outflow is due to photoionization by the active galactic nucleus, we determine that the distance to this component from the central source is > 3 kpc. Due to the large distance determined for the main kinematic component, we discuss the possibility that this outflow is part of a galactic wind.

We present Subaru observations of the newly discovered luminous quasar AKARI J1757+5907, which shows an absorption outflow in its spectrum. The absorption consists of 9 distinct troughs, and our analysis focuses on the troughs at ~ -1000$ km s^{-1} for which we can measure accurate column densities of He I*, Fe II and Mg II. We use photoionization models to constrain the ionization parameter, total hydrogen column density, and the number density of the outflowing gas. These constraints yield lower limits for the distance, mass flow rate and kinetic luminosity for the outflow of 3.7 kpc, 70 M_{sun} yr^{-1}, and 2.0 x 10^{43} ergs s^{-1}, respectively. Such mass flow rate value can contribute significantly to the metal enrichment of the intra-cluster medium. We find that this moderate velocity outflow is similar to those recently discovered in massive post-starburst galaxies. Finally, we describe the scientific potential of future observations targeting this object.

Previous ground based observations of the Seyfert 2 galaxy Mrk 78 revealed a double set of emission lines, similar to those seen in several AGN from recent surveys. Are the double lines due to two AGN with different radial velocities in the same galaxy, or are they due to mass outflows from a single AGN?We present a study of the outflowing ionized gas in the resolved narrow-line region (NLR) of Mrk 78 using observations from Space Telescope Imaging Spectrograph (STIS) and Faint Object Camera (FOC) aboard the Hubble Space Telescope(HST) as part of an ongoing project to determine the kinematics and geometries of active galactic nuclei (AGN) outflows. From the spectroscopic information, we deter- mined the fundamental geometry of the outflow via our kinematics modeling program by recreating radial velocities to fit those seen in four different STIS slit positions. We determined that the double emission lines seen in ground-based spectra are due to an asymmetric distribution of outflowing gas in the NLR. By successfully fitting a model for a single AGN to Mrk 78, we show that it is possible to explain double emission lines with radial velocity offsets seen in AGN similar to Mrk 78 without requiring dual supermassive black holes.

The InfraRed Imaging Spectrograph (IRIS) is a first light client science instrument for the TMT observatory that operates as a client of the NFIRAOS facility multi-conjugate adaptive optics system. This paper reports on the concept study and baseline concept design of the On-Instrument WaveFront Sensors (OIWFS) and NFIRAOS interface subsystems of the IRIS science instrument, a collaborative effort by NRC-HIA, Caltech, and TMT AO and Instrument teams. This includes work on system engineering, structural and thermal design, sky coverage modeling, patrol geometry, probe optics and mechanics design, camera design, and controls design.

We show that time variations in the UV ionizing continuum of quasars, on scales of $\sim$1 year, affect the dynamic structure of the plasmas responsible for low ionization broad absorption lines. Variations of the ionizing continuum produce non-equilibrium photoionization conditions over a significant fraction of the absorbing clouds and supersonically moving ionization fronts. When the flux drops the contraction of the ionized region drives a supersonic cooling front towards the radiation source and a rarefaction wave in the opposite direction. The pressure imbalance is compensated by an increased speed of the cool gas relative to the front. When the flux recovers the cool gas is re-ionized and re-heated by a supersonic ionization front traveling away from the radiation source and a forward shock is created. The reheated clouds equilibrate to a temperature of $\sim 10^4$ K and are observed to have different radial velocities than the main cloud. Such fragmentation seems consistent with the multicomponent structure of troughs seen in some objects. The velocity differences measured among various components in the quasars QSO 2359--1241 and SDSS J0318--0600 can be reproduced by our model if strong magnetic fields ($\sim$10 mG) are present within the clouds.

Using high resolution VLT spectra, we study the multi-component outflow systems of two quasars exhibiting intrinsic Fe II absorption (QSO 2359-1241 and SDSS J0318-0600). From the extracted ionic column densities and using photoionization modeling we determine the gas density, total column density, and ionization parameter for several of the components. For each object the largest column density component is also the densest, and all other components have densities of roughly 1/4 of that of the main component. We demonstrate that all the absorbers lie roughly at the same distance from the source. Further, we calculate the total kinetic luminosities and mass outflow rates of all components and show that these quantities are dominated by the main absorption component.

We present high spectral resolution VLT observations of the BAL quasar SDSS J0318-0600. This high quality data set allows us to extract accurate ionic column densities and determine an electron number density of n_e=10^3.3 +/- 0.2 cm^-3 for the main outflow absorption component. The heavily reddened spectrum of SDSS J0318-0600 requires purely silicate dust with a reddening curve characteristic of predominately large grains, from which we estimate the bolometric luminosity. We carry out photoionization modeling to determine the total column density, ionization parameter and distance of the gas and find that the photionization models suggest abundances greater than solar. Due to the uncertainty in the location of the dust extinction, we arrive at two viable distances for the main ouflow component from the central source, 6 and 18 kpc, where we consider the 6 kpc location as somewhat more physically plausable. Assuming the canonical global covering of 20% for the outflow and a distance of 6 kpc, our analysis yields a mass flux of 120 M_sun yr^-1 and a kinetic luminosity that is ~0.1% of the bolometric luminosity of the object. Should the dust be part of the outflow, then these values are ~4x larger. The large mass flux and kinetic luminosity make this outflow a significant contributor to AGN feedback processes.

We present a study of the radial velocity offsets between narrow emission lines and host galaxy lines (stellar absorption and H I 21-cm emission) in Seyfert galaxies with observed redshifts less than 0.043. We find that 35% of the Seyferts in the sample show [O III] emission lines with blueshifts with respect to their host galaxies exceeding 50 km/s, whereas only 6% show redshifts this large, in qualitative agreement with most previous studies. We also find that a greater percentage of Seyfert 1 galaxies show blueshifts than Seyfert 2 galaxies. Using HST/STIS spatially-resolved spectra of the Seyfert 2 galaxy NGC 1068 and the Seyfert 1 galaxy NGC 4151, we generate geometric models of their narrow-line regions (NLRs) and inner galactic disks, and show how these models can explain the blueshifted [O III] emission lines in collapsed STIS spectra of these two Seyferts. We conclude that the combination of mass outflow of ionized gas in the NLR and extinction by dust in the inner disk (primarily in the form of dust spirals) is primarily responsible for the velocity offsets in Seyfert galaxies. More exotic explanations are not needed. We discuss the implications of this result for the velocity offsets found in higher redshift AGN.

Aims. This work reports radiative transition rates and electron impact excitation collision strengths for levels of the 3s23p, 3s3p2, 3s24s, and 3s23d configurations of Siii. Methods. The radiative data were computed using the Thomas-Fermi-Dirac-Amaldi central potential, but with the modifications introduced by Bautista (2008) that account for the effects of electron-electron interactions. We also introduce new schemes for the optimization of the variational parameters of the potential. Additional calculations were carried out with the Relativistic Hartree-Fock and the multiconfiguration Dirac-Fock methods. Collision strengths in LS-coupling were calculated in the close coupling approximation with the R-matrix method. Then, fine structure collision strengths were obtained by means of the intermediate-coupling frame transformation (ICFT) method which accounts for spin-orbit coupling effects. Results. We present extensive comparisons between the results of different approximations and with the most recent calculations and experiment available in the literature. From these comparisons we derive a recommended set of gf- values and radiative transition rates with their corresponding estimated uncertainties. We also study the effects of different approximations in the representation of the target ion on the electron-impact collision strengths. Our most accurate set of collision strengths were integrated over a Maxwellian distribution of electron energies and the resulting effective collision strengths are given for a wide range of temperatures. Our results present significant differences from recent calculations with the B-spline non-orthogonal R-matrix method. We discuss the sources of the differences.

We report new precision measurements of the properties of our Galaxy's supermassive black hole. Based on astrometric (1995-2007) and radial velocity (2000-2007) measurements from the W. M. Keck 10-meter telescopes, a fully unconstrained Keplerian orbit for the short period star S0-2 provides values for Ro of 8.0+-0.6 kpc, M_bh of 4.1+-0.6x10^6 Mo, and the black hole's radial velocity, which is consistent with zero with 30 km/s uncertainty. If the black hole is assumed to be at rest with respect to the Galaxy, we can further constrain the fit and obtain Ro = 8.4+-0.4 kpc and M_bh = 4.5+-0.4x10^6 Mo. More complex models constrain the extended dark mass distribution to be less than 3-4x10^5 Mo within 0.01 pc, ~100x higher than predictions from stellar and stellar remnant models. For all models, we identify transient astrometric shifts from source confusion and the assumptions regarding the black hole's radial motion as previously unrecognized limitations on orbital accuracy and the usefulness of fainter stars. Future astrometric and RV observations will remedy these effects. Our estimates of Ro and the Galaxy's local rotation speed, which it is derived from combining Ro with the apparent proper motion of Sgr A*, (theta0 = 229+-18 km/s), are compatible with measurements made using other methods. The increased black hole mass found in this study, compared to that determined using projected mass estimators, implies a longer period for the innermost stable orbit, longer resonant relaxation timescales for stars in the vicinity of the black hole and a better agreement with the M_bh-sigma relation.

In a continuing survey of active galactic nuclei observed by the Far Ultraviolet Spectroscopic Explorer, we provide a deeper analysis of intrinsic absorption features found in 35 objects. Our survey is for low-redshift and moderate-luminosity objects, mostly Seyfert galaxies. We find a strong correlation between maximum radial velocity and luminosity. We also examine the relationships between equivalent width (EW), full width at half maximum, velocity: and continuum flux. The correlation between velocity and luminosity has been explored previously by Laor & Brandt, but at a significantly higher redshift and heavily weighted by broad absorption line quasars. We also have examined each object with multiple observations for variability in each of the aforementioned quantities, and have characterized the variation of EW with the continuum flux. In our survey, we find that variability of O VI lambda1032, lambda1038 is less common than of the UV doublets of CIV and N V seen at longer wavelengths, because the O VI absorption is usually saturated. Lyman beta absorption variability is more frequent. In a target-by-target examination we find that broad absorption line absorption and narrow absorption line absorbers are related in terms of maximum outflow velocity and luminosity, and both can be exhibited in similar luminosity objects. We also find one object that shows radial velocity change, seven objects that show equivalent width variability, and two objects that show either transverse velocity changes or a change in ionization.

We present a survey of 72 Seyfert galaxies and quasars observed by the it Far Ultraviolet Spectroscopic Explorer (FUSE). We have determined that 72 of 253 available active galactic nuclei (AGN) targets are viable targets for detection of intrinsic absorption lines. We examined these spectra for signs of intrinsic absorption in the O VI doublet (lambda 1031.9, 1037.6) and Lyman beta (lambda 1025.7). The fraction of Seyfert 1 galaxies and low-redshift quasars at z < 0.15 that show evidence of intrinsic UV absorption is ~50%, which is slightly lower than Crenshaw et al. (1999) found (60%) based on a smaller sample of Seyfert 1 galaxies observed with the Hubble Space Telescope (HST). With this new fraction we find a global covering factor of the absorbing gas with respect to the central nucleus of ~0.4. Our survey is to date the largest searching for intrinsic UV absorption with high spectral resolution, and is the first step toward a more comprehensive study of intrinsic absorption in low-redshift AGN.

We present the results from an optical spectroscopic analysis of the massive stars HD 37366 and HD 54662. We find that HD 37366 is a double-lined spectroscopic binary with a period of 31.8187 +/- 0.0004 days, and HD 54662 is also a double lined binary with a much longer period of 557.8 +/- 0.3 days. The primary of HD 37366 is classified as O9.5 V, and it contributes approximately two-thirds of the optical flux. The less luminous secondary is a broad-lined, early B-type main-sequence star. Tomographic reconstruction of the individual spectra of HD 37366 reveals absorption lines present in each component, enabling us to constrain the nature of the secondary and physical characteristics of both stars. Tomographic reconstruction was not possible for HD 54662; however, we do present mean spectra from our observations that show that the secondary component is approximately half as bright as the primary. The observed spectral energy distributions (SEDs) were fit with model SEDs and galactic reddening curves to determine the angular sizes of the stars. By assuming radii appropriate for their classifications, we determine distance ranges of 1.4 - 1.9 and 1.2 - 1.5 kpc for HD 37366 and HD 54662, respectively.

We report on the design and status of the FLAMINGOS-2 instrument - a fully-cryogenic facility near-infrared imager and multi-object spectrograph for the Gemini 8-meter telescopes. FLAMINGOS-2 has a refractive all-spherical optical system providing 0.18-arcsecond pixels and a 6.2-arcminute circular field-of-view on a 2048x2048-pixel HAWAII-2 0.9-2.4 mm detector array. A slit/decker wheel mechanism allows the selection of up to 9 multi-object laser-machined plates or 3 long slits for spectroscopy over a 6x2-arcminute field of view, and selectable grisms provide resolutions from $\sim$ 1300 to $\sim $3000 over the entire spectrograph bandpass. FLAMINGOS-2 is also compatible with the Gemini Multi-Conjugate Adaptive Optics system, providing multi-object spectroscopic capabilities over a 3x1-arcminute field with high spatial resolution (0.09-arcsec/pixel). We review the designs of optical, mechanical, electronics, software, and On-Instrument WaveFront Sensor subsystems. We also present the current status of the project, currently in final testing in mid-2006.

Using the Multimission Archives at Space Telescope (MAST), we have extracted spectra and determined continuum light curves for 175 Seyfert Galaxies that have been observed with the International Ultraviolet Explorer (IUE) and the Faint Object Spectrograph (FOS) on the Hubble Space Telescope (HST). To obtain the light curves as a function of Julian Date, we used fix bins in the object's rest frame, and measured small regions (between 30 and 60 Angstroms) of each spectrum's continuum flux in the range 1150 Angstroms to 3200 Angstroms. We provide access to the UV light curves and other basic information about the observations in tabular and graphical form via the Internet at http://www.chara.gsu.edu/PEGA/IUE/.

This paper joins a series compiling consistent emission line measurements of large AGN spectral databases, useful for reliable statistical studies of emission line properties. It is preceded by emission line measurements of 993 spectra from the Large Bright Quasar Survey (Forster et al. 2001) and 174 spectra of AGN obtained from the Faint Object Spectrograph (FOS) on HST prior to the installation of COSTAR (Kuraszkiewicz et al. 2002). This time we concentrate on 220 spectra obtained with the FOS after the installation of COSTAR, completing the emission line analysis of all FOS archival spectra. We use the same automated technique as in previous papers, which accounts for Galactic extinction, models blended optical and UV iron emission, includes Galactic and intrinsic absorption lines and models emission lines using multiple Gaussians. We present UV and optical emission line parameters (equivalent widths, fluxes, FWHM, line positions) for a large number (28) of emission lines including upper limits for undetected lines. Further scientific analyses will be presented in subsequent papers.

We discuss a degeneracy between the geometry of the universe and the dark energy equation of state $w_{\rm X}$ which exists in the power spectrum of the cosmic microwave background. In particular, for the case with $w_{\rm X} < -1$, this degeneracy has interesting implications to a lower bound on $w_{\rm X}$ from observations. It is also discussed how this degeneracy can be removed using current observations of type Ia supernovae.

We present new UV spectra of the nucleus of the Seyfert 1 galaxy NGC 5548, which we obtained with the Space Telescope Imaging Spectrograph at high spectral resolution, in conjunction with simultaneous Chandra X-ray Observatory spectra. Taking advantage of the low UV continuum and broad emission-line fluxes, we have determined that the deepest UV absorption component covers at least a portion of the inner, high-ionization narrow-line region (NLR). We find nonunity covering factors in the cores of several kinematic components, which increase the column density measurements of N V and C IV by factors of 1.2 to 1.9 over the full-covering case; however, the revised columns have only a minor effect on the parameters derived from our photoionization models. For the first time, we have simultaneous N V and C IV columns for component 1 (at -1040 km/s), and find that this component cannot be an X-ray warm absorber, contrary to our previous claim based on nonsimultaneous observations. We find that models of the absorbers based on solar abundances severely overpredict the O VI columns previously obtained with the Far Ultraviolet Spectrograph, and present arguments that this is not likely due to variability. However, models that include either enhanced nitrogen (twice solar) or dust, with strong depletion of carbon in either case, are successful in matching all of the observed ionic columns. These models result in substantially lower ionization parameters and total column densities compared to dust-free solar-abundance models, and produce little O VII or O VIII, indicating that none of the UV absorbers are X-ray warm absorbers.

We present observations of the UV absorption lines in the luminous Seyfert 1 galaxy Mrk 509, obtained with the medium resolution (lambda/Delta-lambda ~ 40,000) echelle gratings of the Space Telescope Imaging Spectrograph on the Hubble Space Telescope. The spectra reveal the presence of eight kinematic components of absorption in Ly-alpha, C IV, and N V, at radial velocities of -422, -328, -259, -62, -22, +34, +124, and +210 km s^-1 with respect to an emission-line redshift of z = 0.03440, seven of which were detected in an earlier Far Ultraviolet Spectrographic Explorer (FUSE) spectrum. The component at -22 km s^-1 also shows absorption by Si IV. The covering factor and velocity width of the Si IV lines were lower than those of the higher ionization lines for this component, which is evidence for two separate absorbers at this velocity. We have calculated photoionization models to match the UV column densities in each of these components. Using the predicted O VI column densities, we were able to match the O VI profiles observed in the FUSE spectrum. Based on our results, none of the UV absorbers can produce the X-ray absorption seen in simultaneous Chandra observations; therefore, there must be more highly ionized gas in the radial velocity ranges covered by the UV absorbers.

A particular kind of quintessence is considered, with equation of motion $p_Q/\rho_Q = -1$, corresponding to a cosmological term with time-dependence $\Lambda(t) = \Lambda(t_0) (R(t_0)/R(t))^{P}$ which we examine initially for $0 \leq P < 3$. Energy conservation is imposed, as is consistency with big-bang nucleosynthesis, and the range of allowed $P$ is thereby much restricted to $0 \leq P < 0.2$. The position of the first Doppler peak is computed analytically and the result combined with analysis of high-Z supernovae to find how values of $\Omega_m$ and $\Omega_{\Lambda}$ depend on $P$. Some comparison is made to the CMBFAST public code.

A particular kind of quintessence is considered, with equation of motion $p_Q/\rho_Q = -1$, corresponding to a cosmological term with time-dependence $\Lambda(t) = \Lambda(t_0) (R(t_0)/R(t))^{P}$ which we examine initially for $0 \leq P < 3$. Energy conservation is imposed, as is consistency with big-bang nucleosynthesis, and the range of allowed $P$ is thereby much restricted to $0 \leq P < 0.2$. The position of the first Doppler peak is computed analytically and the result combined with analysis of high-Z supernovae to find how values of $\Omega_m$ and $\Omega_{\Lambda}$ depend on $P$.

The origin of the highest-energy cosmic rays remains elusive. The decay of a superheavy particle (X) into an ultra-energetic neutrino which scatters from a relic (anti-)neutrino at the Z-resonance has attractive features. Given the necessary X mass of $10^{14\sim15}$ GeV, the required lifetime, $10^{15\sim16}$ y, renders model-building a serious challenge but three logical possibilities are considered: (i) X is a Higgs scalar in SU(15) belonging to high-rank representation, leading to {\it power}-enhanced lifetime; (ii) a global X quantum number has {\it exponentially}-suppressed symmetry-breaking by instantons; and (iii) with additional space dimension(s) localisation of X within the real-world brane leads to {\it gaussian} decay suppression, the most efficient of the suppression mechanisms considered.