The Five-hundred-meter Aperture Spherical radio Telescope (FAST) passed national acceptance and is taking pilot cycle of 'Shared-Risk' observations. The 19-beam receiver covering 1.05-1.45 GHz was used for most of these observations. The electronics gain fluctuation of the system is better than 1\% over 3.5 hours, enabling enough stability for observations. Pointing accuracy, aperture efficiency and system temperature are three key parameters of FAST. The measured standard deviation of pointing accuracy is 7.9$''$, which satisfies the initial design of FAST. When zenith angle is less than 26.4$^\circ$, the aperture efficiency and system temperature around 1.4 GHz are $\sim$ 0.63 and less than 24 K for central beam, respectively. The measured value of these two parameters are better than designed value of 0.6 and 25 K, respectively. The sensitivity and stability of the 19-beam backend are confirmed to satisfy expectation by spectral HI observations toward N672 and polarization observations toward 3C286. The performance allows FAST to take sensitive observations in various scientific goals, from studies of pulsar to galaxy evolution.

We present measurements of the redshift-dependent clustering of a DESI-like luminous red galaxy (LRG) sample selected from the Legacy Survey imaging dataset, and use the halo occupation distribution (HOD) framework to fit the clustering signal. The LRG sample contains 2.7 million objects over the redshift range of $0.4 < z < 0.9$ over 5655 sq. degrees. We have developed new photometric redshift (photo-$z$) estimates using the Legacy Survey DECam and WISE photometry, with $\sigma_{\mathrm{NMAD}} = 0.02$ precision for LRGs. We compute the projected correlation function using new methods that maximize signal-to-noise while incorporating redshift uncertainties. We present a novel algorithm for dividing irregular survey geometries into equal-area patches for jackknife resampling. For a 5-parameter HOD model fit using the MultiDark halo catalog, we find that there is little evolution in HOD parameters except at the highest-redshifts. The inferred large-scale structure bias is largely consistent with constant clustering amplitude over time. In an appendix, we explore limitations of MCMC fitting using stochastic likelihood estimates resulting from applying HOD methods to N-body catalogs, and present a new technique for finding best-fit parameters in this situation. Accompanying this paper we have released the PRLS (Photometric Redshifts for the Legacy Surveys) catalog of photo-$z$'s obtained by applying the methods used in this work to the full Legacy Survey Data Release 8 dataset. This catalog provides accurate photometric redshifts for objects with $z < 21$ over more than 16,000 square degrees of sky.

A solar jet on 2014 July 31, which was accompanied by a GOES C1.3 flare and a mini-filament eruption at the jet base, was studied by using observations taken by the New Vacuum Solar Telescope and the Solar Dynamic Observatory. Magnetic field extrapolation revealed that the jet was confined in a fan-spine magnetic system that hosts a null point at the height of about 9 Mm from the solar surface. An inner flare ribbon surrounded by an outer circular ribbon and a remote ribbon were observed to be associated with the eruption, in which the inner and remote ribbons respectively located at the footprints of the inner and outer spines, while the circular one manifested the footprint of the fan structure. It is interesting that the circular ribbon's west part showed an interesting round-trip slipping motion, while the inner ribbon and the circular ribbon's east part displayed a northward slipping motion. Our analysis results indicate that the slipping motions of the inner and the circular flare ribbons reflected the slipping magnetic reconnection process in the fan quasi-separatrix layer, while the remote ribbon was associated with the magnetic reconnection at the null point. In addition, the filament eruption was probably triggered by the magnetic cancellation around its south end, which further drove the slipping reconnection in the fan quasi-separatrix layer and the reconnection at the null point.

We study the early evolution of a hot-channel-like magnetic flux rope (MFR) toward eruption. Combining with imaging observation and magnetic field extrapolation, we find that the hot channel possibly originated from a pre-existing seed MFR with a hyperbolic flux tube (HFT). In the precursor phase, three-dimensional tether-cutting reconnection at the HFT is most likely resulting in the heating and buildup of the hot channel. In this process, the forming hot channel was rapidly enlarged at its spatial size and slipped its feet to two remote positions. Afterward, it instantly erupted outwards with an exponential acceleration, leaving two core dimmings near its feet. We suggest that pre-flare reconnection at the HFT played a crucial role in enlarging the seed MFR and facilitating the onset of its final solar eruption. Moreover, a recently predicted drifting of MFR's footpoints was detected at both core dimmings. In particular, we find that MFR's west footpoint drift was induced by a new reconnection geometry among the erupting MFR's leg and thereby inclined arcades. As MFR's west footpoints gradually drifted to a new position, a set of newborn atypical flare loops connected into the west core dimming, causing a rapid decrease of dimmed area inside this core dimming and also generating a secondary flare ribbon at their remote feet. This reveals that core dimmings may suffer a pronounced diminishment due to the eruptive MFR's footpoint drift, implying that mapping the real footpoints of the erupting MFR down to the Sun's surface is more difficult than previously thought.

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the Baryon Acoustic Oscillation (BAO) technique. The spectra of 35 million galaxies and quasars over $14000 \,\text{deg}^2$ will be measured during the life of the experiment. A new prime focus corrector for the KPNO Mayall telescope will deliver light to 5000 robotically positioned optic fibres. The fibres in turn feed ten broadband spectrographs. Proper alignment of focal plate structure, mainly consisting of a focal plate ring (FPR) and ten focal plate petals (FPP), is crucial in ensuring minimal loss of light in the focal plane. A coordinate measurement machine (CMM) metrology-based approach to alignment requires comprehensive characterisation of critical dimensions of the petals and the ring, all of which were 100% inspected. The metrology data not only served for quality assurance (QA), but also, with careful modelling of geometric transformations, informed the initial choice of integration accessories such as gauge blocks, pads, and shims. The integrated focal plate structure was inspected again on a CMM, and each petal was adjusted according to the updated focal plate metrology data until all datums were extremely close to nominal positions and optical throughput nearly reached the theoretically best possible value. This paper presents our metrology and alignment methodology and complete results for twelve official DESI petals. The as-aligned, total RMS optical throughput for 6168 positioner holes of twelve production petals was indirectly measured to be $99.88 \pm 0.12 \%$, well above the 99.5% project requirement. The successful alignment fully demonstrated the wealth of data, reproducibility, and micron-level precision made available by our CMM metrology-based approach.

The ubiquitous solar jets or jet-like activities are generally regarded as an important source of energy and mass input to the upper solar atmosphere and the solar wind. However, questions about their triggering and driving mechanisms are not completely understood. By taking advantage of high temporal and high spatial resolution stereoscopic observations taken by the Solar Dynamic Observatory (SDO) and the Solar Terrestrial Relations Observatory (STEREO), we report an intriguing two-sided-loop jet occurred on 2013 June 02, which was dynamically associated with the eruption of a mini-filament below an overlying large filament, and two distinct reconnection processes are identified during the formation stage. The SDO observations reveals that the two-sided-loop jet showed a concave shape with a projection speed of about 80 - 136. From the other view angle, the STEREO ahead observations clearly showed that the trajectory of the two arms of the two-sided-loop were along the cavity magnetic field lines hosting the large filament. Contrary to the well-accepted theoretical model, the present observation sheds new light on our understanding of the formation mechanism of two-sided-loop jets. Moreover, the eruption of the two-sided-loop jet not only supplied mass to the overlying large filament, but also provided a rare opportunity to diagnose the magnetic structure of the overlying large filament via the method of three-dimensional reconstruction.

We report the formation of a complicated coronal mass ejection (CME) on 2015 August 23 by using the high temporal and high spatial resolution multi-wavelength observations taken by the Solar Dynamic Observatory and the Solar and Heliospheric Observatory. The CME exhibited both jet-like and bubble-like components simultaneously, and therefore we call it a twin CME. Detailed imaging and kinematic analysis results indicate that the twin CME were evolved form the eruption of a mini-filament driven blowout jet at the east edge of an equatorial coronal hole, in which the activation of the mini-filament was tightly associated with the continuous flux cancellation and quasi-periodic jet-like activities in the filament channel. Due to the magnetic reconnection between the filament and the ambient open field lines, the filament broke partially at the northern part and resulted in an intriguing blowout jet in the south direction. It is interesting that the ejecting jet was deflected by a group of remote open field lines, which resulted in the significant direction change of the jet from southward to eastward. Based on the close temporal and spatial relationships among the jet, filament eruption, and the twin CME, we conclude that the jet-like CME should be the coronal extension of the jet plasma, while the bubble-like one should be originated from the eruption of the mini-filament confined by the closed magnetic fields at the jet-base.

The DESI Legacy Imaging Surveys are a combination of three public projects (the Dark Energy Camera Legacy Survey, the Beijing-Arizona Sky Survey, and the Mayall z-band Legacy Survey) that will jointly image approximately 14,000 deg^2 of the extragalactic sky visible from the northern hemisphere in three optical bands (g, r, and z) using telescopes at the Kitt Peak National Observatory and the Cerro Tololo Inter-American Observatory. The combined survey footprint is split into two contiguous areas by the Galactic plane. The optical imaging is conducted using a unique strategy of dynamically adjusting the exposure times and pointing selection during observing that results in a survey of nearly uniform depth. In addition to calibrated images, the project is delivering a catalog, constructed by using a probabilistic inference-based approach to estimate source shapes and brightnesses. The catalog includes photometry from the grz optical bands and from four mid-infrared bands (at 3.4, 4.6, 12 and 22 micorons) observed by the Wide-field Infrared Survey Explorer (WISE) satellite during its full operational lifetime. The project plans two public data releases each year. All the software used to generate the catalogs is also released with the data. This paper provides an overview of the Legacy Surveys project.

In this paper, we study the onset process of a solar eruption on 21 February 2015, focusing on its unambiguous precursor phase. With multi-wavelength imaging observations from the Atmospheric Imaging Assembly (AIA), definitive tether-cutting (TC) reconnection signatures, i.e., flux convergence and cancellation, bidirectional jets, as well as topology change of hot loops, were clearly observed below the pre-eruption filament. As TC reconnection progressed between the sheared arcades that enveloped the filament, a channel-like magnetic flux rope (MFR) arose in multi-wavelength AIA passbands wrapping around the main axis of the filament. With the subsequent ascent of the newborn MFR, the filament surprisingly split into three branches. After a 7-hour slow rise phase, the high-lying branch containing by the MFR abruptly accelerated causing a two-ribbon flare; while the two low-lying branches remained stable forming a partial eruption. Complemented by kinematic analysis and decay index calculation, we conclude that TC reconnection played a key role in building up the eruptive MFR and triggering its slow rise. The onset of the torus instability may have led the high-lying branch into the standard eruption scenario in the fashion of a catastrophe.

The Dark Energy Spectroscopic Instrument (DESI) is under construction to measure the expansion history of the universe using the baryon acoustic oscillations technique. The spectra of 35 million galaxies and quasars over 14,000 square degrees will be measured during a 5-year survey. A new prime focus corrector for the Mayall telescope at Kitt Peak National Observatory will deliver light to 5,000 individually targeted fiber-fed robotic positioners. The fibers in turn feed ten broadband multi-object spectrographs. We describe the ProtoDESI experiment, that was installed and commissioned on the 4-m Mayall telescope from August 14 to September 30, 2016. ProtoDESI was an on-sky technology demonstration with the goal to reduce technical risks associated with aligning optical fibers with targets using robotic fiber positioners and maintaining the stability required to operate DESI. The ProtoDESI prime focus instrument, consisting of three fiber positioners, illuminated fiducials, and a guide camera, was installed behind the existing Mosaic corrector on the Mayall telescope. A Fiber View Camera was mounted in the Cassegrain cage of the telescope and provided feedback metrology for positioning the fibers. ProtoDESI also provided a platform for early integration of hardware with the DESI Instrument Control System that controls the subsystems, provides communication with the Telescope Control System, and collects instrument telemetry data. Lacking a spectrograph, ProtoDESI monitored the output of the fibers using a Fiber Photometry Camera mounted on the prime focus instrument. ProtoDESI was successful in acquiring targets with the robotically positioned fibers and demonstrated that the DESI guiding requirements can be met.

DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$\alpha$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.

DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \lambda/\Delta\lambda$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.