sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Dorn, C.

Normalized to: Dorn, C.

28 article(s) in total. 272 co-authors, from 1 to 7 common article(s). Median position in authors list is 3,0.

[1]  oai:arXiv.org:2003.10314  [pdf] - 2127442
A remnant planetary core in the hot-Neptune desert
Armstrong, David J.; Lopez, Théo A.; Adibekyan, Vardan; Booth, Richard A.; Bryant, Edward M.; Collins, Karen A.; Emsenhuber, Alexandre; Huang, Chelsea X.; King, George W.; Lillo-box, Jorge; Lissauer, Jack J.; Matthews, Elisabeth C.; Mousis, Olivier; Nielsen, Louise D.; Osborn, Hugh; Otegi, Jon; Santos, Nuno C.; Sousa, Sérgio G.; Stassun, Keivan G.; Veras, Dimitri; Ziegler, Carl; Acton, Jack S.; Almenara, Jose M.; Anderson, David R.; Barrado, David; Barros, Susana C. C.; Bayliss, Daniel; Belardi, Claudia; Bouchy, Francois; Briceno, César; Brogi, Matteo; Brown, David J. A.; Burleigh, Matthew R.; Casewell, Sarah L.; Chaushev, Alexander; Ciardi, David R.; Collins, Kevin I.; Colón, Knicole D.; Cooke, Benjamin F.; Crossfield, Ian J. M.; Díaz, Rodrigo F.; Deleuil, Magali; Mena, Elisa Delgado; Demangeon, Olivier D. S.; Dorn, Caroline; Dumusque, Xavier; Eigmuller, Philipp; Fausnaugh, Michael; Figueira, Pedro; Gan, Tianjun; Gandhi, Siddharth; Gill, Samuel; Goad, Michael R.; Guenther, Maximilian N.; Helled, Ravit; Hojjatpanah, Saeed; Howell, Steve B.; Jackman, James; Jenkins, James S.; Jenkins, Jon M.; Jensen, Eric L. N.; Kennedy, Grant M.; Latham, David W.; Law, Nicholas; Lendl, Monika; Lozovsky, Michael; Mann, Andrew W.; Moyano, Maximiliano; McCormac, James; Meru, Farzana; Mordasini, Christoph; Osborn, Ares; Pollacco, Don; Queloz, Didier; Raynard, Liam; Ricker, George R.; Rowden, Pamela; Santerne, Alexandre; Schlieder, Joshua E.; Seager, S.; Sha, Lizhou; Tan, Thiam-Guan; Tilbrook, Rosanna H.; Ting, Eric; Udry, Stéphane; Vanderspek, Roland; Watson, Christopher A.; West, Richard G.; Wilson, Paul A.; Winn, Joshua N.; Wheatley, Peter; Villasenor, Jesus Noel; Vines, Jose I.; Zhan, Zhuchang
Comments: Published in Nature. This is a preprint of the article, before minor changes made during the refereeing and editing process. The published PDF can be accessed for free by following this link: https://rdcu.be/b5miB
Submitted: 2020-03-23, last modified: 2020-07-03
The interiors of giant planets remain poorly understood. Even for the planets in the Solar System, difficulties in observation lead to major uncertainties in the properties of planetary cores. Exoplanets that have undergone rare evolutionary pathways provide a new route to understanding planetary interiors. We present the discovery of TOI-849b, the remnant core of a giant planet, with a radius smaller than Neptune but an anomalously high mass $M_p=40.8^{+2.4}_{-2.5}M_{\oplus}$ and density of $5.5\pm0.8$gcm$^{-3}$, similar to the Earth. Interior structure models suggest that any gaseous envelope of pure hydrogen and helium consists of no more than $3.9^{+0.8}_{-0.9}$% of the total mass of the planet. TOI-849b transits a late G type star (T$_{\rm mag}=11.5$) with an orbital period of 18.4 hours, leading to an equilibrium temperature of 1800K. The planet's mass is larger than the theoretical threshold mass for runaway gas accretion. As such, the planet could have been a gas giant before undergoing extreme mass loss via thermal self-disruption or giant planet collisions, or it avoided substantial gas accretion, perhaps through gap opening or late formation. Photoevaporation rates cannot provide the mass loss required to reduce a Jupiter-like gas giant, but can remove a few $M_\oplus$ hydrogen and helium envelope on timescales of several Gyr, implying that any remaining atmosphere is likely to be enriched by water or other volatiles from the planetary interior. TOI-849b represents a unique case where material from the primordial core is left over from formation and available to study.
[2]  oai:arXiv.org:2006.12353  [pdf] - 2119206
The impact of exoplanets' measured parameters on the inferred internal structure
Comments: 12 pages, 12 figures
Submitted: 2020-06-22
Exoplanet characterization is one of the main foci of current exoplanetary science. For super-Earths and sub-Neptunes, we mostly rely on mass and radius measurements, which allow to derive the body's mean density and give a rough estimate of the planet's bulk composition. However, the determination of planetary interiors is a very challenging task. In addition to the uncertainty in the observed fundamental parameters, theoretical models are limited due to the degeneracy in determining the planetary composition. We aim to study several aspects that affect internal characterization of super-Earths and sub-Neptunes: observational uncertainties, location on the M-R diagram, impact of additional constraints as bulk abundances or irradiation, and model assumptions. We use a full probabilistic Bayesian inference analysis that accounts for observational and model uncertainties. We employ a Nested Sampling scheme to efficiently produce the posterior probability distributions for all the planetary structural parameter of interest. We include a structural model based on self-consistent thermodynamics of core, mantle, high-pressure ice, liquid water, and H-He envelope. Regarding the effect of mass and radius uncertainties on the determination of the internal structure, we find three different regimes: below the Earth-like composition line and above the pure-water composition line smaller observational uncertainties lead to better determination of the core and atmosphere mass respectively, and between them structure characterization only weakly depends on the observational uncertainties. We show that small variations in the temperature or entropy profiles lead to radius variations that are comparable to the observational uncertainty, suggesting that uncertainties linked to model assumptions can become more relevant to determine the internal structure than observational uncertainties.
[3]  oai:arXiv.org:2001.08834  [pdf] - 2036908
Mass determinations of the three mini-Neptunes transiting TOI-125
Comments: Accepted for publication in MNRAS
Submitted: 2020-01-23
The Transiting Exoplanet Survey Satellite, TESS, is currently carrying out an all-sky search for small planets transiting bright stars. In the first year of the TESS survey, steady progress was made in achieving the mission's primary science goal of establishing bulk densities for 50 planets smaller than Neptune. During that year, TESS's observations were focused on the southern ecliptic hemisphere, resulting in the discovery of three mini-Neptunes orbiting the star TOI-125, a V=11.0 K0 dwarf. We present intensive HARPS radial velocity observations, yielding precise mass measurements for TOI-125b, TOI-125c and TOI-125d. TOI-125b has an orbital period of 4.65 days, a radius of $2.726 \pm 0.075 ~\mathrm{R_{\rm E}}$, a mass of $ 9.50 \pm 0.88 ~\mathrm{M_{\rm E}}$ and is near the 2:1 mean motion resonance with TOI-125c at 9.15 days. TOI-125c has a similar radius of $2.759 \pm 0.10 ~\mathrm{R_{\rm E}}$ and a mass of $ 6.63 \pm 0.99 ~\mathrm{M_{\rm E}}$, being the puffiest of the three planets. TOI-125d, has an orbital period of 19.98 days and a radius of $2.93 \pm 0.17~\mathrm{R_{\rm E}}$ and mass $13.6 \pm 1.2 ~\mathrm{M_{\rm E}}$. For TOI-125b and TOI-125d we find unusual high eccentricities of $0.19\pm 0.04$ and $0.17^{+0.08}_{-0.06}$, respectively. Our analysis also provides upper mass limits for the two low-SNR planet candidates in the system; for TOI-125.04 ($R_P=1.36 ~\mathrm{R_{\rm E}}$, $P=$0.53 days) we find a $2\sigma$ upper mass limit of $1.6~\mathrm{M_{\rm E}}$, whereas TOI-125.05 ( $R_P=4.2^{+2.4}_{-1.4} ~\mathrm{R_{\rm E}}$, $P=$ 13.28 days) is unlikely a viable planet candidate with upper mass limit $2.7~\mathrm{M_{\rm E}}$. We discuss the internal structure of the three confirmed planets, as well as dynamical stability and system architecture for this intriguing exoplanet system.
[4]  oai:arXiv.org:1904.08300  [pdf] - 1995395
Linking the evolution of terrestrial interiors and an early outgassed atmosphere to astrophysical observations
Comments: 19 pages, published in A&A, abstract shortened
Submitted: 2019-04-17, last modified: 2019-11-07
A terrestrial planet is molten during formation and may remain so if subject to intense insolation or tidal forces. Observations continue to favour the detection and characterisation of hot planets, potentially with large outgassed atmospheres. We aim to determine the radius of hot Earth-like planets with large outgassed atmospheres and explore differences between molten and solid silicate planets and their influence on the mass-radius relationship and transmission and emission spectra. An interior-atmosphere model, combined with static structure calculations, tracks the evolving radius of a rocky mantle that is outgassing CO$_2$ and H$_2$O. Synthetic emission and transmission spectra are generated for CO$_2$ and H$_2$O dominated atmospheres. Atmospheres dominated by CO$_2$ suppress the outgassing of H$_2$O to a greater extent than previously realised, as previous studies have applied an erroneous relationship between volatile mass and partial pressure. We therefore predict more H$_2$O can be retained by the interior during the later stages of magma ocean crystallisation. Furthermore, formation of a lid at the surface can tie outgassing of H$_2$O to the efficiency of heat transport through the lid, rather than the atmosphere's radiative timescale. Contraction of the mantle as it solidifies gives $\sim5\%$ radius decrease, which can partly be offset by addition of a relatively light species to the atmosphere. We conclude that a molten silicate mantle can increase the radius of a terrestrial planet by around $5\%$ compared to its solid counterpart, or equivalently account for a $13\%$ decrease in bulk density. An outgassing atmosphere can perturb the total radius according to its speciation. Atmospheres of terrestrial planets around M-stars that are dominated by CO$_2$ or H$_2$O can be distinguished by observing facilities with extended wavelength coverage (e.g., JWST).
[5]  oai:arXiv.org:1903.07694  [pdf] - 2025421
HD 213885b: A transiting 1-day-period super-Earth with an Earth-like composition around a bright ($V=7.9$) star unveiled by TESS
Comments: MNRAS accepted version
Submitted: 2019-03-18, last modified: 2019-11-04
We report the discovery of the 1.008-day, ultra-short period (USP) super-Earth HD 213885b (TOI-141b) orbiting the bright ($V=7.9$) star HD 213885 (TOI-141, TIC 403224672), detected using photometry from the recently launched TESS mission. Using FEROS, HARPS and CORALIE radial-velocities, we measure a precise mass of $8.8\pm0.6$ $M_\oplus$ for this $1.74 \pm 0.05$ $R_\oplus$ exoplanet, which provides enough information to constrain its bulk composition, which is similar to Earth's but enriched in iron. The radius, mass and stellar irradiation of HD 213885b are, given our data, very similar to 55 Cancri e, making this exoplanet a good target to perform comparative exoplanetology of short period, highly irradiated super-Earths. Our precise radial-velocities reveal an additional $4.78$-day signal which we interpret as arising from a second, non-transiting planet in the system, HD 213885c (TOI-141c), whose minimum mass of $19.95\pm 1.4$ $M_\oplus$ makes it consistent with being a Neptune-mass exoplanet. The HD 213885 system is very interesting from the perspective of future atmospheric characterization, being the second brightest star to host an ultra-short period transiting super-Earth (with the brightest star being, in fact, 55 Cancri). Prospects for characterization with present and future observatories are discussed.
[6]  oai:arXiv.org:1909.10058  [pdf] - 1988663
From the stellar properties of HD219134 to the internal compositions of its transiting exoplanets
Comments: 12 pages, 6 figures, 7 tables; published in A$\&$A. (This version includes language editing corrections.)
Submitted: 2019-09-22, last modified: 2019-10-30
The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($\rho_{\star}=1.82\pm0.19 \rho_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.
[7]  oai:arXiv.org:1903.05419  [pdf] - 1912771
Hot, rocky and warm, puffy super-Earths orbiting TOI-402 (HD 15337)
Comments: 25 pages, 16 figures, 6 tables, accepted in A&A
Submitted: 2019-03-13, last modified: 2019-07-01
TESS is revolutionising the search for planets orbiting bright and nearby stars. In sectors 3 and 4, TESS observed TOI-402 (TIC-120896927), a bright V=9.1 K1 dwarf also known as HD 15337, and found two transiting signals with period of 4.76 and 17.18 days and radius of 1.90 and 2.21\,\Rearth. This star was observed as part of the radial-velocity search for planets using the HARPS spectrometer, and 85 precise radial-velocity measurements were obtained over a period of 14 years. In this paper, we analyse the HARPS radial-velocity measurements in hand to confirm the planetary nature of these two signals. By reanalysing TESS photometry and host star parameters using EXOFASTv2, we find that TOI-402.01 and TOI-402.02 have periods of 4.75642$\pm$0.00021 and 17.1784$\pm$0.0016 days and radii of 1.70$\pm$0.06 and 2.52$\pm$0.11\,\Rearth\,(precision 3.6 and 4.2\%), respectively. By analysing the HARPS radial-velocity measurements, we find that those planets are both super-Earths with masses of 7.20$\pm$0.81 and 8.79$\pm$1.67\,\Mearth\,(precision 11.3 and 19.0\%), and small eccentricities compatible with zero at 2$\sigma$. Although having rather similar masses, the radius of these two planets is really different, putting them on different sides of the radius gap. With stellar irradiation 160 times more important than Earth for TOI-402.01 and only 29 times more for TOI-402.02, it is likely that photo-evaporation is at the origin of this radius difference. Those two planets, being in the same system and therefore being in the same irradiation environment are therefore extremely important to perform comparative exoplanetology across the evaporation valley and thus bring constraints on the mechanisms responsible for the radius gap.
[8]  oai:arXiv.org:1906.00669  [pdf] - 1916950
Pebble-driven planet formation for TRAPPIST-1 and other compact systems
Comments: 16 pages, accepted for publication in A&A, abstract abridged
Submitted: 2019-06-03, last modified: 2019-06-15
Recently, seven Earth-sized planets were discovered around the M-dwarf star TRAPPIST-1. Thanks to transit-timing variations, the masses and therefore the bulk densities of the planets have been constrained, suggesting that all TRAPPIST-1 planets are consistent with water mass fractions on the order of 10%. These water fractions, as well as the similar planet masses within the system, constitute strong constraints on the origins of the TRAPPIST-1 system. In a previous work, we outlined a pebble-driven formation scenario. In this paper we investigate this formation scenario in more detail. We used a Lagrangian smooth-particle method to model the growth and drift of pebbles and the conversion of pebbles to planetesimals through the streaming instability. We used the N-body code \texttt{MERCURY} to follow the composition of planetesimals as they grow into protoplanets by merging and accreting pebbles. This code is adapted to account for pebble accretion, type-I migration, and gas drag. In this way, we modelled the entire planet formation process (pertaining to planet masses and compositions, not dynamical configuration). We find that planetesimals form in a single, early phase of streaming instability. The initially narrow annulus of planetesimals outside the snowline quickly broadens due to scattering. Our simulation results confirm that this formation pathway indeed leads to similarly-sized planets and is highly efficient in turning pebbles into planets ($\sim$50% solids-to-planets conversion efficiency). [...] The water content of planets resulting from our simulations is on the order of 10%, and our results predict a `V-shaped' trend in the planet water fraction with orbital distance: from relatively high (innermost planets) to relatively low (intermediate planets) to relatively high (outermost planets).
[9]  oai:arXiv.org:1812.07222  [pdf] - 1800111
A new class of Super-Earths formed from high-temperature condensates: HD219134 b, 55 Cnc e, WASP-47 e
Comments: accepted for publication in MNRAS, 17 pages, 16 figures
Submitted: 2018-12-18
We hypothesise that differences in the temperatures at which the rocky material condensed out of the nebula gas can lead to differences in the composition of key rocky species (e.g., Fe, Mg, Si, Ca, Al, Na) and thus planet bulk density. Such differences in the observed bulk density of planets may occur as a function of radial location and time of planet formation. In this work we show that the predicted differences are on the cusp of being detectable with current instrumentation. In fact, for HD 219134, the 10 % lower bulk density of planet b compared to planet c could be explained by enhancements in Ca, Al rich minerals. However, we also show that the 11 % uncertainties on the individual bulk densities are not sufficiently accurate to exclude the absence of a density difference as well as differences in volatile layers. Besides HD 219134 b, we demonstrate that 55 Cnc e and WASP-47 e are similar candidates of a new Super-Earth class that have no core and are rich in Ca and Al minerals which are among the first solids that condense from a cooling proto-planetary disc. Planets of this class have densities 10-20% lower than Earth-like compositions and may have very different interior dynamics, outgassing histories and magnetic fields compared to the majority of Super-Earths.
[10]  oai:arXiv.org:1804.07537  [pdf] - 1797630
Mass, radius, and composition of the transiting planet 55 Cnc e : using interferometry and correlations
Comments: 5 figures, 16 pages (11 pages main text + 5 pages Appendix). Published in ApJ. This version contains small modifications implemented at proof stage (after the previous version was posted on arXiv) + footnote reference to a recently published update of this paper
Submitted: 2018-04-20, last modified: 2018-12-13
The characterization of exoplanets relies on that of their host star. However, stellar evolution models cannot always be used to derive the mass and radius of individual stars, because many stellar internal parameters are poorly constrained. Here, we use the probability density functions (PDFs) of directly measured parameters to derive the joint PDF of the stellar and planetary mass and radius. Because combining the density and radius of the star is our most reliable way of determining its mass, we find that the stellar (respectively planetary) mass and radius are strongly (respectively moderately) correlated. We then use a generalized Bayesian inference analysis to characterize the possible interiors of 55 Cnc e. We quantify how our ability to constrain the interior improves by accounting for correlation. The information content of the mass-radius correlation is also compared with refractory element abundance constraints. We provide posterior distributions for all interior parameters of interest. Given all available data, we find that the radius of the gaseous envelope is $0.08 \pm 0.05 R_p$. A stronger correlation between the planetary mass and radius (potentially provided by a better estimate of the transit depth) would significantly improve interior characterization and reduce drastically the uncertainty on the gas envelope properties.
[11]  oai:arXiv.org:1809.08008  [pdf] - 1754393
Mass, radius, and composition of the transiting planet 55 Cnc e : using interferometry and correlations --- A quick update
Comments: 3 pages, 1 figure, published in Research Notes of the American Astronomical Society
Submitted: 2018-09-21
In a recent paper (Crida et al. 2018, accepted on April 19), we presented a method to derive the mass and radius of a transiting exoplanet and their intrinsic correlation, that we applied to 55 Cnc e. We wrote: "More precise observations of the transit would be very useful in this particular case and would allow to increase significantly the gain on the planetary density precision." Three months later, Bourrier et al. (2018) published new observations of the system. Additionally, Gaia's DR2 was released on April 25, 2018. The purpose of this research note is solely to implement these precise new data in our pipeline to provide an up-to-date result of our model. We find $R_p = 1.947\pm 0.038\,R_\oplus$ and $M_p = 8.59\pm 0.43\,M_\oplus$. We also double the precision on the planetary density ($\rho_p = 1.164\pm 0.062\,\rho_\oplus$), which allows us to refine the estimates for all interior parameters of interest. In particular, we now find that the radius of the gaseous envelope is $0.03\pm 0.02\,R_p$.
[12]  oai:arXiv.org:1808.09872  [pdf] - 1767618
Threshold radii of volatile-rich planets
Comments:
Submitted: 2018-08-29
Constraining the planetary composition is essential for exoplanetary characterization. In this paper, we use a statistical analysis to determine the characteristic maximum (threshold) radii for various compositions for exoplanets with masses up to 25 Earth masses (M$_\oplus$). We confirm that most planets with radii larger than 1.6 Earth radius (R$_\oplus$) are not rocky, and must consist of lighter elements, as found by previous studies. We find that planets with radii above 2.6 R$_\oplus$ cannot be pure-water worlds, and must contain significant amounts of hydrogen and helium (H-He). We find that planets with radii larger than about 3 R$_\oplus$, 3.6 R$_\oplus$, and 4.3 R$_\oplus$ are expected to consist of 2%, 5% and 10% of H-He, respectively. We investigate the sensitivity of the results to the assumed internal structure, the planetary temperature and albedo, and the accuracy of the mass and radius determination. We show that the envelope's metallicity, the percentage of H-He and the distribution of the elements play a significant role in the determination of the threshold radius. Finally, we conclude that despite the degenerate nature of the problem, it is possible to put limits on the possible range of compositions for planets with well-measured mass and radius.
[13]  oai:arXiv.org:1808.08201  [pdf] - 1738471
Equation of state of SiC at extreme conditions: new insight into the interior of carbon rich exoplanets
Comments: 30 Pages, 8 Figures
Submitted: 2018-08-24
There is a direct relation between the composition of a host star and that of the planets orbiting around it. As such, the recent discovery of stars with unusual chemical composition, notably enriched in carbon instead of oxygen, support the existence of exoplanets with a chemistry dominated by carbides instead of oxides. Accordingly several studies have been recently conducted on the Si C binary system at high pressure and temperature. Nonetheless, the properties of carbides at the P T conditions of exoplanets interiors are still inadequately constrained, effectively hampering reliable planetary modeling. Here we present an in situ X ray diffraction study of the Si C binary system up to 200 GPa and 3500 K, significantly enlarging the pressure range explored by previous experimental studies. The large amount of collected data allows us to properly investigate the phase diagram and to refine the Clapeyron slope of the transition line from the zinc blende to the rock salt structure. Furthermore the pressure volume temperature equation of state are provided for the high pressure phase, characterized by low compressibility and thermal expansion. Our results are used to model idealized C rich exoplanets of end members composition. In particular, we derived mass radius relations and performed numerical simulations defining rheological parameters and initial conditions which lead to onset of convection in such SiC planets. We demonstrate that if restrained to silicate rich mantle compositions, the interpretation of mass radius relations may underestimate the interior diversity of exoplanets.
[14]  oai:arXiv.org:1808.01803  [pdf] - 1763035
Interior characterization in multiplanetary systems: TRAPPIST-1
Comments: Accepted for publication in ApJ, 20 pages, 14 figures
Submitted: 2018-08-06
Interior characterization traditionally relies on individual planetary properties, ignoring correlations between different planets of the same system. For multi-planetary systems, planetary data are generally correlated. This is because, the differential masses and radii are better constrained than absolute planetary masses and radii. We explore such correlations and data specific to the multiplanetary-system of TRAPPIST-1 and study their value for our understanding of planet interiors. Furthermore, we demonstrate that the rocky interior of planets in a multi-planetary system can be preferentially probed by studying the most dense planet representing a rocky interior analogue. Our methodology includes a Bayesian inference analysis that uses a Markov chain Monte Carlo scheme. Our interior estimates account for the anticipated variability in the compositions and layer thicknesses of core, mantle, water oceans and ice layers, and a gas envelope. Our results show that (1) interior estimates significantly depend on available abundance proxies and (2) that the importance of inter-dependent planetary data for interior characterization is comparable to changes in data precision by 30 %. For the interiors of TRAPPIST-1 planets, we find that possible water mass fractions generally range from 0-25 %. The lack of a clear trend of water budgets with orbital period or planet mass challenges possible formation scenarios. While our estimates change relatively little with data precision, they critically depend on data accuracy. If planetary masses varied within ~24 %, interiors would be consistent with uniform (~7 %) or an increasing water mass fractions with orbital period (~2-12 %).
[15]  oai:arXiv.org:1807.04301  [pdf] - 1779579
The 55 Cnc system reassessed
Comments: 22 pages, 16 figures, accepted for publication in A&A
Submitted: 2018-07-11
Orbiting a bright, nearby star the 55 Cnc system offers a rare opportunity to study a multiplanet system that has a wide range of planetary masses and orbital distances. Using two decades of photometry and spectroscopy data, we have measured the rotation of the host star and its solar-like magnetic cycle. Accounting for this cycle in our velocimetric analysis of the system allows us to revise the properties of the outermost giant planet and its four planetary companions. The innermost planet 55 Cnc e is an unusually close-in super-Earth, whose transits have allowed for detailed follow-up studies. Recent observations favor the presence of a substantial atmosphere yet its composition, and the nature of the planet, remain unknown. We combined our derived planet mass (Mp = 8.0+-0.3 Mearth) with refined measurement of its optical radius derived from HST/STIS observations (Rp = 1.88+-0.03 Rearth over 530-750nm) to revise the density of 55 Cnc e (rho = 6.7+-0.4 g cm-3). Based on these revised properties we have characterized possible interiors of 55 Cnc e using a generalized Bayesian model. We confirm that the planet is likely surrounded by a heavyweight atmosphere, contributing a few percents of the planet radius. While we cannot exclude the presence of a water layer underneath the atmosphere, this scenario is unlikely given the observations of the planet across the entire spectrum and its strong irradiation. Follow-up observations of the system in photometry and in spectroscopy over different time-scales are needed to further investigate the nature and origin of this iconic super-Earth.
[16]  oai:arXiv.org:1805.12520  [pdf] - 1694209
Absolute densities in exoplanetary systems: photodynamical modelling of Kepler-138
Comments: accepted for publication in MNRAS
Submitted: 2018-05-31
In favourable conditions, the density of transiting planets in multiple systems can be determined from photometry data alone. Dynamical information can be extracted from light curves, providing modelling is done self-consistently, i.e. using a photodynamical model, which simulates the individual photometric observations instead of the more generally used transit times. We apply this methodology to the Kepler-138 planetary system. The derived planetary bulk densities are a factor of 2 more precise than previous determinations, and we find a discrepancy in the stellar bulk density with respect to a previous study. This leads, in turn, to a discrepancy in the determination of masses and radii of the star and the planets. In particular, we find that interior planet, Kepler-138b, has a size in between Mars and the Earth. Given our mass and density estimates, we characterize the planetary interiors using a generalized Bayesian inference model. This model allows us to quantify for interior degeneracy and calculate confidence regions of interior parameters such as thicknesses of the core, the mantle, and ocean and gas layers. We find that Kepler-138b and Kepler-138d have significantly thick volatile layers and that the gas layer of Kepler-138b is likely enriched. On the other hand, Kepler-138c can be purely rocky.
[17]  oai:arXiv.org:1802.09264  [pdf] - 1698063
Outgassing on stagnant-lid super-Earths
Comments: Accepted for publication in A&A, 19 Figures, 20 pages
Submitted: 2018-02-26
We explore volcanic outgassing on purely rocky, stagnant-lid exoplanets of different interior structures, compositions, thermal states, and age. We focus on planets in the mass range of 1-8 ME (Earth masses). We derive scaling laws to quantify first- and second-order influences of these parameters on volcanic outgassing after 4.5 Gyrs of evolution. Given commonly observed astrophysical data of super-Earths, we identify a range of possible interior structures and compositions by employing Bayesian inference modelling. [..] The identified interiors are subsequently used as input for two-dimensional (2-D) convection models to study partial melting, depletion, and outgassing rates of CO2. In total, we model depletion and outgassing for an extensive set of more than 2300 different super-Earth cases. We find that there is a mass range for which outgassing is most efficient (~2--3 ME, depending on thermal state) and an upper mass where outgassing becomes very inefficient (~5--7 \ME, depending on thermal state). [..] In summary, depletion and outgassing are mainly influenced by planet mass and thermal state. Interior structure and composition only moderately affect outgassing. The majority of outgassing occurs before 4.5 Gyrs, especially for planets below 3 ME. We conclude that for stagnant-lid planets, (1) compositional and structural properties have secondary influence on outgassing compared to planet mass and thermal state, and (2) confirm that there is a mass range for which outgassing is most efficient and an upper mass limit, above which no significant outgassing can occur. Our predicted trend of CO2-atmospheric masses can be observationally tested for exoplanets. These findings and our provided scaling laws are an important step in order to provide interpretative means for upcoming missions such as, e.g., JWST and E-ELT, that aim at characterizing exoplanet atmospheres.
[18]  oai:arXiv.org:1802.01377  [pdf] - 1629579
The nature of the TRAPPIST-1 exoplanets
Comments: in press in Astronomy & Astrophysics, 24 pages, 13 figures
Submitted: 2018-02-05
Context. The TRAPPIST-1 system hosts seven Earth-sized, temperate exoplanets orbiting an ultra-cool dwarf star. As such, it represents a remarkable setting to study the formation and evolution of terrestrial planets that formed in the same protoplanetary disk. While the sizes of the TRAPPIST-1 planets are all known to better than 5% precision, their densities have significant uncertainties (between 28% and 95%) because of poor constraints on the planet's masses. Aims.The goal of this paper is to improve our knowledge of the TRAPPIST-1 planetary masses and densities using transit-timing variations (TTV). The complexity of the TTV inversion problem is known to be particularly acute in multi-planetary systems (convergence issues, degeneracies and size of the parameter space), especially for resonant chain systems such as TRAPPIST-1. Methods. To overcome these challenges, we have used a novel method that employs a genetic algorithm coupled to a full N-body integrator that we applied to a set of 284 individual transit timings. This approach enables us to efficiently explore the parameter space and to derive reliable masses and densities from TTVs for all seven planets. Results. Our new masses result in a five- to eight-fold improvement on the planetary density uncertainties, with precisions ranging from 5% to 12%. These updated values provide new insights into the bulk structure of the TRAPPIST-1 planets. We find that TRAPPIST-1\,c and e likely have largely rocky interiors, while planets b, d, f, g, and h require envelopes of volatiles in the form of thick atmospheres, oceans, or ice, in most cases with water mass fractions less than 5%.
[19]  oai:arXiv.org:1711.07745  [pdf] - 1630258
Secondary atmospheres on HD 219134 b and c
Comments: 13 pages, 10 figures, Accepted by AAS Journals
Submitted: 2017-11-21
We analyze the interiors of HD~219134~b and c, which are among the coolest super Earths detected thus far. Without using spectroscopic measurements, we aim at constraining if the possible atmospheres are hydrogen-rich or hydrogen-poor. In a first step, we employ a full probabilistic Bayesian inference analysis in order to rigorously quantify the degeneracy of interior parameters given the data of mass, radius, refractory element abundances, semi-major axes, and stellar irradiation. We obtain constraints on structure and composition for core, mantle, ice layer, and atmosphere. In a second step, we aim to draw conclusions on the nature of possible atmospheres by considering atmospheric escape. Specifically, we compare the actual possible atmospheres to a threshold thickness above which a primordial (H$_2$-dominated) atmosphere can be retained against evaporation over the planet's lifetime. The best constrained parameters are the individual layer thicknesses. The maximum radius fraction of possible atmospheres are 0.18 and 0.13 $R$ (radius), for planets b and c, respectively. These values are significantly smaller than the threshold thicknesses of primordial atmospheres: 0.28 and 0.19 $R$, respectively. Thus, the possible atmospheres of planets b and c are unlikely to be H$_2$-dominated. However, whether possible volatile layers are made of gas or liquid/solid water cannot be uniquely determined. Our main conclusions are: (1) the possible atmospheres for planets b and c are enriched and thus possibly secondary in nature, and (2) both planets may contain a gas layer, whereas the layer of HD 219134 b must be larger. HD 219134 c can be rocky.
[20]  oai:arXiv.org:1711.00777  [pdf] - 1602759
Constraining planet structure and composition from stellar chemistry: trends in different stellar populations
Comments: Accepted for publication in Astronomy & Astrophysics
Submitted: 2017-11-02
The chemical composition of stars that have orbiting planets provides important clues about the frequency, architecture, and composition of exoplanet systems. We explore the possibility that stars from different galactic populations that have different intrinsic abundance ratios may produce planets with a different overall composition. We compiled abundances for Fe, O, C, Mg, and Si in a large sample of solar neighbourhood stars that belong to different galactic populations. We then used a simple stoichiometric model to predict the expected iron-to-silicate mass fraction and water mass fraction of the planet building blocks, as well as the summed mass percentage of all heavy elements in the disc. Assuming that overall the chemical composition of the planet building blocks will be reflected in the composition of the formed planets, we show that according to our model, discs around stars from different galactic populations, as well as around stars from different regions in the Galaxy, are expected to form rocky planets with significantly different iron-to-silicate mass fractions. The available water mass fraction also changes significantly from one galactic population to another. The results may be used to set constraints for models of planet formation and chemical composition. Furthermore, the results may have impact on our understanding of the frequency of planets in the Galaxy, as well as on the existence of conditions for habitability.
[21]  oai:arXiv.org:1710.05605  [pdf] - 1826748
Assessing the Interior Structure of Terrestrial Exoplanets with Implications for Habitability
Comments: accepted book chapter in Handbook of Exoplanets, SpringerLink, 3 Figures, 20 pages (excl. references)
Submitted: 2017-10-16
Astrophysical observations reveal a large diversity of radii and masses of exoplanets. It is important to characterize the interiors of exoplanets to understand planetary diversity and further determine how unique, or not, Earth is. Assessing interior structure is challenging because there are few data and large uncertainties. Thus, for a given exoplanet a range of interior structure models can satisfy available data. Typically, interior models aim to constrain the radial structure and composition of the core and mantle, and additionally ice, ocean, and gas layer if appropriate. Constraining the parameters of these layers may also inform us about interior dynamics. However, it remains challenging to constrain interior dynamics using interior structure models because structure models are relatively insensitive to the thermal state of a planet. Nevertheless, elucidating interior dynamics remains a key goal in exoplanetology due to its role in determining surface conditions and hence habitability. Thus far, Earth-like habitability can be excluded for super-Earths that are in close proximity to their stars and therefore have high surface temperatures that promote local magma oceans.
[22]  oai:arXiv.org:1708.01363  [pdf] - 1586760
The language of exoplanet ranking metrics needs to change
Comments: Published in Nature Astronomy, Comment, 02/2017
Submitted: 2017-08-03
We have found many Earth-sized worlds but we have no way of determining if their surfaces are Earth-like. This makes it impossible to quantitatively compare habitability, and pretending we can risks damaging the field.
[23]  oai:arXiv.org:1609.03909  [pdf] - 1531578
Bayesian analysis of interiors of HD 219134b, Kepler-10b, Kepler-93b, CoRoT-7b, 55 Cnc e, and HD 97658b using stellar abundance proxies
Comments: Astronomy & Astrophysics, 597, A38 (15 pages, 9 figures)
Submitted: 2016-09-13, last modified: 2017-01-06
Using a generalized Bayesian inference method, we aim to explore the possible interior structures of six selected exoplanets for which planetary mass and radius measurements are available in addition to stellar host abundances: HD~219134b, Kepler-10b, Kepler-93b, CoRoT-7b, 55~Cnc~e, and HD~97658b. We aim to investigate the importance of stellar abundance proxies for the planetary bulk composition (namely Fe/Si and Mg/Si) on prediction of planetary interiors. We performed a full probabilistic Bayesian inference analysis to formally account for observational and model uncertainties while obtaining confidence regions of structural and compositional parameters of core, mantle, ice layer, ocean, and atmosphere. We determined how sensitive our parameter predictions depend on (1) different estimates of bulk abundance constraints and (2) different correlations of bulk abundances between planet and host star. [...] Although the possible ranges of interior structures are large, structural parameters and their correlations are constrained by the sparse data. The probability for the tested exoplanets to be Earth-like is generally very low. Furthermore, we conclude that different estimates of planet bulk abundance constraints mainly affect mantle composition and core size.
[24]  oai:arXiv.org:1609.03908  [pdf] - 1531577
A generalized bayesian inference method for constraining the interiors of super Earths and sub-Neptunes
Comments: Astronomy & Astrophysics, 597, A37, 17 pages, 11 figures
Submitted: 2016-09-13, last modified: 2017-01-06
We aim to present a generalized Bayesian inference method for constraining interiors of super Earths and sub-Neptunes. Our methodology succeeds in quantifying the degeneracy and correlation of structural parameters for high dimensional parameter spaces. Specifically, we identify what constraints can be placed on composition and thickness of core, mantle, ice, ocean, and atmospheric layers given observations of mass, radius, and bulk refractory abundance constraints (Fe, Mg, Si) from observations of the host star's photospheric composition. We employed a full probabilistic Bayesian inference analysis that formally accounts for observational and model uncertainties. Using a Markov chain Monte Carlo technique, we computed joint and marginal posterior probability distributions for all structural parameters of interest. We included state-of-the-art structural models based on self-consistent thermodynamics of core, mantle, high-pressure ice, and liquid water. Furthermore, we tested and compared two different atmospheric models that are tailored for modeling thick and thin atmospheres, respectively. First, we validate our method against Neptune. Second, we apply it to synthetic exoplanets of fixed mass and determine the effect on interior structure and composition when (1) radius, (2) atmospheric model, (3) data uncertainties, (4) semi-major axes, (5) atmospheric composition (i.e., a priori assumption of enriched envelopes versus pure H/He envelopes), and (6) prior distributions are varied. Our main conclusions are: [...]
[25]  oai:arXiv.org:1508.04970  [pdf] - 1273303
From stellar to planetary composition: Galactic chemical evolution of Mg/Si mineralogical ratio
Comments: Accepted by A&A (Letter to the Editor)
Submitted: 2015-08-20
The main goal of this work is to study element ratios that are important for the formation of planets of different masses. We study potential correlations between the existence of planetary companions and the relative elemental abundances of their host stars. We use a large sample of FGK-type dwarf stars for which precise Mg, Si, and Fe abundances have been derived using HARPS high-resolution and high-quality data. A first analysis of the data suggests that low-mass planet host stars show higher [Mg/Si] ratios, while giant planet hosts present [Mg/Si] that is lower than field stars. However, we found that the [Mg/Si] ratio significantly depends on metallicity through Galactic chemical evolution. After removing the Galactic evolution trend only the difference in the [Mg/Si] elemental ratio between low-mass planet hosts and non-hosts was present in a significant way. These results suggests that low-mass planets are more prevalent around stars with high [Mg/Si]. Our results demonstrate the importance of Galactic chemical evolution and indicate that it may play an important role in the planetary internal structure and composition.
[26]  oai:arXiv.org:1507.08081  [pdf] - 1265799
Constraining planet structure from stellar chemistry: the cases of CoRoT-7, Kepler-10, and Kepler-93
Comments: A&A Letters, in press
Submitted: 2015-07-29
We explore the possibility that the stellar relative abundances of different species can be used to constrain the bulk abundances of known transiting rocky planets. We use high resolution spectra to derive stellar parameters and chemical abundances for Fe, Si, Mg, O, and C in three stars hosting low mass, rocky planets: CoRoT-7, Kepler-10, and Kepler-93. These planets follow the same line along the mass-radius diagram, pointing toward a similar composition. The derived abundance ratios are compared with the solar values. With a simple stoichiometric model, we estimate the iron mass fraction in each planet, assuming stellar composition. We show that in all cases, the iron mass fraction inferred from the mass-radius relationship seems to be in good agreement with the iron abundance derived from the host star's photospheric composition. The results suggest that stellar abundances can be used to add constraints on the composition of orbiting rocky planets.
[27]  oai:arXiv.org:1502.03605  [pdf] - 984429
Can we constrain interior structure of rocky exoplanets from mass and radius measurements?
Comments: 19 pages, 18 figures, accepted in Astronomy & Astrophysics (no changes to previous version)
Submitted: 2015-02-12, last modified: 2015-04-24
We present an inversion method based on Bayesian analysis to constrain the interior structure of terrestrial exoplanets, in the form of chemical composition of the mantle and core size. Specifically, we identify what parts of the interior structure of terrestrial exoplanets can be determined from observations of mass, radius, and stellar elemental abundances. We perform a full probabilistic inverse analysis to formally account for observational and model uncertainties and obtain confidence regions of interior structure models. This enables us to characterize how model variability depends on data and associated uncertainties. We test our method on terrestrial solar system planets and find that our model predictions are consistent with independent estimates. Furthermore, we apply our method to synthetic exoplanets up to 10 Earth masses and up to 1.7 Earth radii as well as to exoplanet Kepler-36b. Importantly, the inversion strategy proposed here provides a framework for understanding the level of precision required to characterize the interior of exoplanets. Our main conclusions are: (1) observations of mass and radius are sufficient to constrain core size; (2) stellar elemental abundances (Fe, Si, Mg) are key constraints to reduce degeneracy in interior structure models and to constrain mantle composition; (3) the inherent degeneracy in determining interior structure from mass and radius observations does not only depend on measurement accuracies but also on the actual size and density of the exoplanet. We argue that precise observations of stellar elemental abundances are central in order to place constraints on planetary bulk composition and to reduce model degeneracy. [...]
[28]  oai:arXiv.org:astro-ph/0508135  [pdf] - 75024
Development of a carbon fibre composite active mirror: Design and testing
Comments: Accepted by Optical Engineering. Figures 1-7 on http://www.star.ucl.ac.uk/~sk/OEpaper_files/
Submitted: 2005-08-04
Carbon fibre composite technology for lightweight mirrors is gaining increasing interest in the space- and ground-based astronomical communities for its low weight, ease of manufacturing, excellent thermal qualities and robustness. We present here first results of a project to design and produce a 27 cm diameter deformable carbon fibre composite mirror. The aim was to produce a high surface form accuracy as well as low surface roughness. As part of this programme, a passive mirror was developed to investigate stability and coating issues. Results from the manufacturing and polishing process are reported here. We also present results of a mechanical and thermal finite element analysis, as well as early experimental findings of the deformable mirror. Possible applications and future work are discussed.