The integrated Sachs-Wolfe (ISW) effect is caused by the decay of cosmological gravitational potential, and is therefore a unique probe of dark energy. However, its robust detection is still problematic. Various tensions between different data sets, different large scale structure (LSS) tracers, and between data and the $\Lambda$CDM theory prediction, exist. We propose a novel method of ISW measurement by cross correlating CMB and the LSS traced by "low-density-position" (LDP, \citet{2019ApJ...874....7D}). It isolates the ISW effect generated by low-density regions of the universe, but insensitive to selection effects associated with voids. We apply it to the DR8 galaxy catalogue of the DESI Legacy imaging surveys, and obtain the LDPs at $z\leq 0.6$ over $\sim$ 20000 $deg^2$ sky coverage. We then cross correlate with the Planck temperature map, and detect the ISW effect at $3.2\sigma$. We further compare the measurement with numerical simulations of the concordance $\Lambda$CDM cosmology, and find the ISW amplitude parameter $A_{ISW}=1.14\pm0.38$ when we adopt a LDP definition radius $R_s=3^{'}$, fully consistent with the prediction of the standard $\Lambda$CDM cosmology ($A_{ISW}=1$). This agreement with $\Lambda$CDM cosmology holds for all the galaxy samples and $R_s$ that we have investigated. Furthermore, the S/N is comparable to that of galaxy ISW measurement. These results demonstrate the LDP method as a competitive alternative to existing ISW measurement methods, and provide independent checks to existing tensions.

Fast radio bursts (FRBs) are bright, millisecond-duration radio transients originating from extragalactic distances. Their origin is unknown. Some FRB sources emit repeat bursts, ruling out cataclysmic origins for those events. Despite searches for periodicity in repeat burst arrival times on time scales from milliseconds to many days, these bursts have hitherto been observed to appear sporadically, and though clustered, without a regular pattern. Here we report the detection of a $16.35\pm0.15$ day periodicity (or possibly a higher-frequency alias of that periodicity) from a repeating FRB 180916.J0158+65 detected by the Canadian Hydrogen Intensity Mapping Experiment Fast Radio Burst Project (CHIME/FRB). In 38 bursts recorded from September 16th, 2018 through February 4th, 2020, we find that all bursts arrive in a 5-day phase window, and 50% of the bursts arrive in a 0.6-day phase window. Our results suggest a mechanism for periodic modulation either of the burst emission itself, or through external amplification or absorption, and disfavour models invoking purely sporadic processes.

Magnetars are highly magnetized young neutron stars that occasionally produce enormous bursts and flares of X-rays and gamma-rays. Of the approximately thirty magnetars currently known in our Galaxy and Magellanic Clouds, five have exhibited transient radio pulsations. Fast radio bursts (FRBs) are millisecond-duration bursts of radio waves arriving from cosmological distances. Some have been seen to repeat. A leading model for repeating FRBs is that they are extragalactic magnetars, powered by their intense magnetic fields. However, a challenge to this model has been that FRBs must have radio luminosities many orders of magnitude larger than those seen from known Galactic magnetars. Here we report the detection of an extremely intense radio burst from the Galactic magnetar SGR 1935+2154 using the Canadian Hydrogen Intensity Mapping Experiment (CHIME) FRB project. The fluence of this two-component bright radio burst and the estimated distance to SGR 1935+2154 together imply a 400-800 MHz burst energy of $\sim 3 \times 10^{34}$ erg, which is three orders of magnitude brighter than those of any radio-emitting magnetar detected thus far. Such a burst coming from a nearby galaxy would be indistinguishable from a typical FRB. This event thus bridges a large fraction of the radio energy gap between the population of Galactic magnetars and FRBs, strongly supporting the notion that magnetars are the origin of at least some FRBs.

Sample selection is a necessary preparation for weak lensing measurement. It is well-known that selection itself may introduce bias in the measured shear signal. Using image simulation and the Fourier_Quad shear measurement pipeline, we quantify the selection bias in various commonly used selection function (signal-to-noise-ratio, magnitude, etc.). We proposed a new selection function defined in the power spectrum of the galaxy image. This new selection function has low selection bias, and it is particularly convenient for shear measurement pipelines based on Fourier transformation.

We report on the detection of seven bursts from the periodically active, repeating fast radio burst (FRB) source FRB 180916.J0158+65 in the 300-400-MHz frequency range with the Green Bank Telescope (GBT). Emission in multiple bursts is visible down to the bottom of the GBT band, suggesting that the cutoff frequency (if it exists) for FRB emission is lower than 300 MHz. Observations were conducted during predicted periods of activity of the source, and had simultaneous coverage with the Low Frequency Array (LOFAR) and the FRB backend on the Canadian Hydrogen Intensity Mapping Experiment (CHIME) telescope. We find that one of the GBT-detected bursts has potentially associated emission in the CHIME band (400-800 MHz) but we detect no bursts in the LOFAR band (110-190 MHz), placing a limit of $\alpha > -1.0$ on the spectral index of broadband emission from the source. We also find that emission from the source is severely band-limited with burst bandwidths as low as $\sim$40 MHz. In addition, we place the strictest constraint on observable scattering of the source, $<$ 1.7 ms, at 350 MHz, suggesting that the circumburst environment does not have strong scattering properties. Additionally, knowing that the circumburst environment is optically thin to free-free absorption at 300 MHz, we find evidence against the association of a hyper-compact HII region or a young supernova remnant (age $<$ 50 yr) with the source.

We report on the discovery and analysis of bursts from nine new repeating fast radio burst (FRB) sources found using the Canadian Hydrogen Intensity Mapping Experiment (CHIME) telescope. These sources span a dispersion measure (DM) range of 195 to 1380 pc cm$^{-3}$. We detect two bursts from three of the new sources, three bursts from four of the new sources, four bursts from one new source, and five bursts from one new source. We determine sky coordinates of all sources with uncertainties of $\sim$10$^\prime$. We detect Faraday rotation measures for two sources, with values $-20(1)$ and $-499.8(7)$ rad m$^{-2}$, that are substantially lower than the RM derived from bursts emitted by FRB 121102. We find that the DM distribution of our events, combined with the nine other repeaters discovered by CHIME/FRB, is indistinguishable from that of thus far non-repeating CHIME/FRB events. However, as previously reported, the burst widths appear statistically significantly larger than the thus far non-repeating CHIME/FRB events, further supporting the notion of inherently different emission mechanisms and/or local environments. These results are consistent with previous work, though are now derived from 18 repeating sources discovered by CHIME/FRB during its first year of operation. We identify candidate galaxies that may contain FRB 190303.J1353+48 (DM = 222.4 pc cm$^{-3}$).

In the CDM paradigm, the halo mass function is a sensitive probe of the cosmic structure. In observations, halo mass is typically estimated from its relation with other observables. The resulting halo mass function is subject to systematic bias, such as the Eddington bias, due to the scatter or uncertainty in the observable - mass relation. Exact correction for the bias is not easy, as predictions for the observables are typically model-dependent in simulations. In this paper, we point out an interesting feature in the halo mass function of the concordence $\Lambda$CDM model: the total halo mass within each evenly-spaced logarithmic mass bin is approximately the same over a large mass range. We show that this property allows us to construct an almost bias-free halo mass function using only an observable (as a halo mass estimator) and stacked weak lensing measurements as long as the scatter between the true halo mass and the observable-inferred mass has a stable form in logarithmic units. The method is not sensitive to the form of the mass-observable relation. We test the idea using cosmological simulations, and show that the method performs very well for realistic observables.

Low density regions are less affected by the nonlinear structure formation and baryonic physics. They are ideal places for probing the nature of dark energy, a possible explanation for the cosmic acceleration. Unlike void lensing, which requires identifications of individual voids, we study the stacked lensing signals around the low-density-positions (LDP), defined as places that are devoid of foreground bright galaxies in projection. The method allows a direct comparison with numerical results by drawing correspondence between the bright galaxies with halos. It leads to lensing signals that are significant enough for differentiating several dark energy models. In this work, we use the CFHTLenS catalogue to define LDPs, as well as measuring their background lensing signals. We consider several different definitions of the foreground bright galaxies (redshift range \& magnitude cut). Regarding the cosmological model, we run six simulations: the first set of simulations have the same initial conditions, with $\rm{w_{de}=-1,-0.5,-0.8,-1.2}$; the second set of simulations include a slightly different $\Lambda$CDM model and a w(z) model from \cite{2017NatAs...1..627Z}. The lensing results indicate that the models with $\rm{w_{de}=-0.5,-0.8}$ are not favored, and the other four models all achieve comparable agreement with the data.

The tilt, rotation, or offset of each CCD with respect to the focal plane, as well as the distortion of the focal plane itself, cause shape distortions to the observed objects, an effect typically known as field distortion (FD). We point out that FD provides a unique way of quantifying the accuracy of cosmic shear measurement. The idea is to stack the shear estimators from galaxies that share similar FD-induced shape distortions. Given that the latter can be calculated with parameters from astrometric calibrations, the accuracy of the shear estimator can be directly tested on real images. It provides a way to calibrate the multiplicative and additive shear recovery biases within the scientific data itself, without requiring simulations or any external data sets. We use the CFHTLenS images to demonstrate the accuracy of the Fourier_Quad shear recovery method. We highlight some details in our image processing pipeline, including background removal, source identification and deblending, astrometric calibration, star selection for PSF reconstruction, noise reduction, etc.. We show that in the shear ranges of -0.005 < g_1 < 0.005 and -0.008 < g_2 < 0.008, the multiplicative biases are at the level of < 0.04. Slight additive biases on the order of 5E-4 (6 sigma) are identified for sources provided by the official CFHTLenS catalog (not using its shear catalog), but are minor (4 sigma) for source catalog generated by our Fourier_Quad pipeline.

We present a detailed analysis of the soft X-ray emission of 3C445 using an archival Chandra HETG spectrum. Highly-ionized H- and He-like Mg, Si and S lines, as well as a resolved low-ionized Si K$\alpha$ line, are detected in the high resolution spectrum. The He-like triplets of Mg and Si are resolved into individual lines, and the calculated R ratios indicate a high density for the emitter. The low values of the G ratios indicate the lines originate from collisionally ionized plasmas. However, the detection of a resolved narrow Ne X RRC feature in the spectrum seems to prefer to a photoionized environment. The spectrum is subsequently modelled with a photoionization model, and the results are compared with that of a collisional model. Through a detailed analysis on the spectrum, we exclude a collisional origin for these emission lines. A one-component photoionization model provides a great fit to the emission features. The best-fit parameters are log$\xi$ = $3.3^{+0.4}_{-0.3}$ erg cm s$^{-1}$, $n_{H}$ = $5^{+15}_{-4.5}\times10^{10}$ cm$^{-3}$ and $N_{H}$ = $2.5^{+3.8}_{-1.7}\times10^{20}$ cm$^{-2}$. According to the calculated high density for the emitter, the measured velocity widths of the emission lines and the inferred the radial distance (6 $\times$ $10^{14}$ - 8 $\times$ $10^{15}$ cm), we suggest the emission lines originating from matter locate in the broad line region (BLR).

Accurate reconstruction of the spatial distributions of the Point Spread Function (PSF) is crucial for high precision cosmic shear measurements. Nevertheless, current methods are not good at recovering the PSF fluctuations of high spatial frequencies. In general, the residual PSF fluctuations are spatially correlated, therefore can significantly contaminate the correlation functions of the weak lensing signals. We propose a method to correct for this contamination statistically, without any assumptions on the PSF and galaxy morphologies or their spatial distribution. We demonstrate our idea with the data from the W2 field of CFHTLenS.

In this work, we present a novel centroiding method based on Fourier space Phase Fitting(FPF) for Point Spread Function(PSF) reconstruction. We generate two sets of simulations to test our method. The first set is generated by GalSim with elliptical Moffat profile and strong anisotropy which shifts the center of the PSF. The second set of simulation is drawn from CFHT i band stellar imaging data. We find non-negligible anisotropy from CFHT stellar images, which leads to $\sim$0.08 scatter in unit of pixels using polynomial fitting method Vakili and Hogg (2016). And we apply FPF method to estimate the centroid in real space, this scatter reduces to $\sim$0.04 in SNR=200 CFHT like sample. In low SNR (50 and 100) CFHT like samples, the background noise dominates the shifting of the centroid, therefore the scatter estimated from different methods are similar. We compare polynomial fitting and FPF using GalSim simulation with optical anisotropy. We find that in all SNR$\sim$50, 100 and 200) samples, FPF performs better than polynomial fitting by a factor of $\sim$3. In general, we suggest that in real observations there are anisotropy which shift the centroid, and FPF method is a better way to accurately locate it.

Reconstruction of the point spread function (PSF) is a critical process in weak lensing measurement. We develop a real-data based and galaxy-oriented pipeline to compare the performances of various PSF reconstruction schemes. Making use of a large amount of the CFHTLenS data, the performances of three classes of interpolating schemes - polynomial, Kriging, and Shepard - are evaluated. We find that polynomial interpolations with optimal orders and domains perform the best. We quantify the effect of the residual PSF reconstruction error on shear recovery in terms of the multiplicative and additive biases, and their spatial correlations using the shear measurement method of Zhang et al. (2015). We find that the impact of PSF reconstruction uncertainty on the shear-shear correlation can be significantly reduced by cross correlating the shear estimators from different exposures. It takes only 0.2 stars (SNR > 100) per square arcmin on each exposure to reach the best performance of PSF interpolation, a requirement that is generally satisfied in the CFHTlenS data.

A radiation gene box (RGB) onboard the SJ-10 satellite is a device carrying mice and drosophila cells to determine the biological effects of space radiation environment. The shielded fluxes of different radioactive sources were calculated and the linear energy transfers of gamma-rays, electrons, protons and alpha-particles in tissue were acquired using A-150 tissue-equivalent plastic. Then, a conceptual model of a space radiation instrument employing three semiconductor sub-detectors for deriving the charged and uncharged radiation environment of the RGB was designed. The energy depositions in the three sub-detectors were classified into fifteen channels (bins) in an algorithm derived from the Monte Carlo method. The physical feasibility of the conceptual instrument was also verified by Monte Carlo simulations.

We present a new cluster catalog extracted from the Sloan Digital Sky Survey Data Release 6 (SDSS DR6) using an adaptive matched filter (AMF) cluster finder. We identify 69,173 galaxy clusters in the redshift range 0.045 $\le z <$ 0.78 in 8420 sq. deg. of the sky. We provide angular position, redshift, richness, core and virial radii estimates for these clusters, as well as an error analysis for each of these quantities. We also provide a catalog of more than 205,000 galaxies representing the three brightest galaxies in the $r$ band which are possible BCG candidates. We show basic properties of the BCG candidates and study how their luminosity scales in redshift and cluster richness. We compare our catalog with the maxBCG and GMBCG catalogs, as well as with that of Wen, Han, and Liu. We match between 30% and 50% of clusters between catalogs over all overlapping redshift ranges. We find that the percentage of matches increases with the richness for all catalogs. We cross match the AMF catalog with available X-ray data in the same area of the sky and find 539 matches, 119 of which with temperature measurements. We present scaling relations between optical and X-ray properties and cluster center comparison. We find that both $\Lambda_{200}$ and $R_{200}$ correlate well with both $L_X$ and $T_X$, with no significant difference in trend if we restrict the matches to flux-limited X-ray samples.

We study the properties of Brightest Cluster Galaxies (BCGs) drawn from a catalogue of more than 69000 clusters in the SDSS DR6 based on the adaptive matched filter technique (AMF, Szabo et al., 2010). Our sample consists of more than 14300 galaxies in the redshift range 0.1-0.3. We test the catalog by showing that it includes well-known BCGs which lie in the SDSS footprint. We characterize the BCGs in terms of r-band luminosities and optical colours as well as their trends with redshift. In particular, we define and study the fraction of blue BCGs, namely those that are likely to be missed by either colour-based cluster surveys and catalogues. Richer clusters tend to have brighter BCGs, however less dominant than in poorer systems. 4-9% of our BCGs are at least 0.3 mag bluer in the g-r colour than the red-sequence at their given redshift. Such a fraction decreases to 1-6% for clusters above a richness of 50, where 3% of the BCGs are 0.5 mag below the red-sequence. A preliminary morphological study suggests that the increase in the blue fraction at lower richnesses may have a non-negligible contribution from spiral galaxies. We show that a colour selection based on the g-r red-sequence or on a cut at colour u-r >2.2 can lead to missing the majority of such blue BCGs. We also extend the colour analysis to the UV range by cross-matching our catalogue with publicly available data from Galex GR4 and GR5. We show a clear correlation between offset from the optical red-sequence and the amount of UV-excess. Finally, we cross-matched our catalogue with the ACCEPT cluster sample (Cavagnolo et al., 2009), and find that blue BCGs tend to be in clusters with low entropy and short cooling times. That is, the blue light is presumably due to recent star formation associated to gas feeding by cooling flows. (abridged)

We examine the alignment between Brightest Cluster Galaxies (BCGs) and their host clusters in a sample of 7031 clusters with 0.08<z<0.44 found using a matched-filter algorithm and an independent sample of 5744 clusters with 0.1<z<0.3 selected with the maxBCG algorithm, both extracted from the Sloan Digital Sky Survey Data Release 6 imaging data. We confirm that BCGs are preferentially aligned with the cluster's major axis; clusters with dominant BCGs (>0.65 mag brighter than the mean of the second and third ranked galaxies) show stronger alignment than do clusters with less dominant BCGs at the 4.4 sigma level. Rich clusters show a stronger alignment than do poor clusters at the 2.3 sigma level. Low redshift clusters (z<0.26) show more alignment than do high redshift (z>0.26) clusters, with a difference significant at the 3.0 sigma level. Our results do not depend on the algorithm used to select the cluster sample, suggesting that they are not biased by systematics of either algorithm. The correlation between BCG dominance and cluster alignment may be a consequence of the hierarchical merging process which forms the cluster. The observed redshift evolution may follow from secondary infall at late redshifts.

We present a modified adaptive matched filter algorithm designed to identify clusters of galaxies in wide-field imaging surveys such as the Sloan Digital Sky Survey. The cluster-finding technique is fully adaptive to imaging surveys with spectroscopic coverage, multicolor photometric redshifts, no redshift information at all, and any combination of these within one survey. It works with high efficiency in multi-band imaging surveys where photometric redshifts can be estimated with well-understood error distributions. Tests of the algorithm on realistic mock SDSS catalogs suggest that the detected sample is ~85% complete and over 90% pure for clusters with masses above 1.0*10^{14} h^{-1} M_solar and redshifts up to z=0.45. The errors of estimated cluster redshifts from maximum likelihood method are shown to be small (typically less that 0.01) over the whole redshift range with photometric redshift errors typical of those found in the Sloan survey. Inside the spherical radius corresponding to a galaxy overdensity of Delta=200, we find the derived cluster richness Lambda_{200} a roughly linear indicator of its virial mass M_{200}, which well recovers the relation between total luminosity and cluster mass of the input simulation.

We compute the properties of dark matter halos with mass $10^{6.5}-10^9\msun$ at redshift $z=6-11$ in the standard cold dark matter cosmological model, utilizing a very high resolution N-body simulation. We find that dark matter halos in these mass and redshift ranges are significantly biased over matter with a bias factor in the range 2-6. The dark matter halo mass function displays a slope of $2.05\pm 0.15$ at the small mass end. We do not find a universal dark matter density profile. Instead, we find a significant dependence of the central density profile of dark matter halos on halo mass and epoch with $\alpha_0=0.4-1.0$; the high-mass ($M\ge 10^8\msun$) low-redshift ($z\sim 6$) halos occupy the high end of the range and low-mass ($M\sim 10^{7}\msun$) high-redshift ($z\sim 11$) halos occupy the low end. Additionally, for fixed mass and epoch there is a significant dispersion in $\alpha_0$ due to the stochastic assembly of halos. Our results fit a relationship of the form $\alpha_0=0.75((1+z)/7.0)^{-1.25}(M/10^7\msun)^{0.11(1+z)/7.0}$ with a dispersion about this fit of $\pm 0.5$ and no systematic dependence of variance correlated with environment. The median spin parameter of dark matter halos is $0.03-0.04$ but with a large lognormal dispersion of $\sim 0.4$. Various quantities are tabulated or fitted with empirical formulae.

The cluster correlation function and its richness dependence are determined from 1108 clusters of galaxies -- the largest sample of clusters studied so far -- found in 379 deg^2 of Sloan Digital Sky Survey early data. The results are compared with previous samples of optically and X-ray selected clusters. The richness-dependent correlation function increases monotonically from an average correlation scale of ~ 12 h^{-1} Mpc for poor clusters to ~ 25 h^{-1} Mpc for the richer, more massive clusters with a mean separation of ~ 90 h^{-1} Mpc. X-ray selected clusters suggest slightly stronger correlations than optically selected clusters (~ 2-\sigma). The results are compared with large-scale cosmological simulations. The observed richness-dependent cluster correlation function is well represented by the standard flat LCDM model (\Omega_m ~= 0.3, h ~= 0.7), and is inconsistent with the considerably weaker correlations predicted by \Omega_m = 1 models. An analytic relation for the correlation scale versus cluster mean separation, r_0 - d, that best describes the observations and the LCDM prediction is r_0 ~= 2.6 \sqrt{d} (for d ~= 20 - 90 h^{-1} Mpc). Data from the complete Sloan Digital Sky Survey, when available, will greatly enhance the accuracy of the results and allow a more precise determination of cosmological parameters.

We study the evolution of the cluster correlation function and its richness-dependence from z = 0 to z = 3 using large-scale cosmological simulations. A standard flat LCDM model with \Omega_m = 0.3 and, for comparison, a tilted \Omega_m = 1 model, TSCDM, are used. The evolutionary predictions are presented in a format suitable for direct comparisons with observations. We find that the cluster correlation strength increases with redshift: high redshift clusters are clustered more strongly (in comoving scale) than low redshift clusters of the same mass. The increased correlations with redshift, in spite of the decreasing mass correlation strength, is caused by the strong increase in cluster bias with redshift: clusters represent higher density peaks of the mass distribution as the redshift increases. The richness-dependent cluster correlation function, presented as the correlation-scale versus cluster mean separation relation, R_0 - d, is found to be, remarkably, independent of redshift to z <~ 2 for LCDM and z <~ 1 for TCDM (for a fixed correlation function slope and cluster mass within a fixed comoving radius). The non-evolving R_0 - d relation implies that both the comoving clustering scale and the cluster mean separation increase with redshift for the same mass clusters so that the R_0 - d relation remains essentially unchanged. The evolution of the R_0 - d relation from z ~ 0 to z ~ 3 provides an important new tool in cosmology; it can be used to break degeneracies that exist at z ~ 0 and provide precise determination of cosmological parameters.

We present a catalog of 799 clusters of galaxies in the redshift range z_est = 0.05 - 0.3 selected from ~400 deg^2 of early SDSS commissioning data along the celestial equator. The catalog is based on merging two independent selection methods -- a color-magnitude red-sequence maxBCG technique (B), and a Hybrid Matched-Filter method (H). The BH catalog includes clusters with richness \Lambda >= 40 (Matched-Filter) and N_gal >= 13 (maxBCG), corresponding to typical velocity dispersion of \sigma_v >~ 400 km s^{-1} and mass (within 0.6 h^{-1) Mpc radius) >~ 5*10^{13} h^{-1} M_sun. This threshold is below Abell richness class 0 clusters. The average space density of these clusters is 2*10^{-5} h^3 Mpc^{-3}. All NORAS X-ray clusters and 53 of the 58 Abell clusters in the survey region are detected in the catalog; the 5 additional Abell clusters are detected below the BH catalog cuts. The cluster richness function is determined and found to exhibit a steeply decreasing cluster abundance with increasing richness. We derive observational scaling relations between cluster richness and observed cluster luminosity and cluster velocity dispersion; these scaling relations provide important physical calibrations for the clusters. The catalog can be used for studies of individual clusters, for comparisons with other sources such as X-ray clusters and AGNs, and, with proper correction for the relevant selection functions, also for statistical analyses of clusters.

The mass function of clusters of galaxies is determined from 400 deg^2 of early commissioning imaging data of the Sloan Digital Sky Survey; ~300 clusters in the redshift range z = 0.1 - 0.2 are used. Clusters are selected using two independent selection methods: a Matched Filter and a red-sequence color magnitude technique. The two methods yield consistent results. The cluster mass function is compared with large-scale cosmological simulations. We find a best-fit cluster normalization relation of sigma_8*omega_m^0.6 = 0.33 +- 0.03 (for 0.1 ~< omega_m ~< 0.4), or equivalently sigma_8 = (0.16/omega_m)^0.6. The amplitude of this relation is significantly lower than the previous canonical value, implying that either omega_m is lower than previously expected (omega_m = 0.16 if sigma_8 = 1) or sigma_8 is lower than expected (sigma_8 = 0.7 if omega_m = 0.3). The best-fit mass function parameters are omega_m = 0.19 (+0.08,-0.07) and sigma_8 = 0.9 (+0.3,-0.2). High values of omega_m (>= 0.4) and low sigma_8 (=< 0.6) are excluded at >~ 2 sigma.