We present a method for attaining sub-arcsecond pointing stability during sub- orbital balloon flights, as designed for in the High Altitude Lensing Observatory (HALO) concept. The pointing method presented here has the potential to perform near-space quality optical astronomical imaging at 1-2% of the cost of space-based missions. We also discuss an architecture that can achieve sufficient thermomechanical stability to match the pointing stability. This concept is motivated by advances in the development and testing of Ultra Long Duration Balloon (ULDB) flights which promise to allow observation campaigns lasting more than three months. The design incorporates a multi-stage pointing architecture comprising: a gondola coarse azimuth control system, a multi-axis nested gimbal frame structure with arcsecond stability, a telescope de-rotator to eliminate field rotation, and a fine guidance stage consisting of both a telescope mounted angular rate sensor and guide CCDs in the focal plane to drive a fast-steering mirror. We discuss the results of pointing tests together with a preliminary thermo-mechanical analysis required for sub-arcsecond pointing at high altitude. Possible future applications in the areas of wide-field surveys and exoplanet searches are also discussed.

Future orbiting observatories will survey large areas of sky in order to constrain the physics of dark matter and dark energy using weak gravitational lensing and other methods. Lossy compression of the resultant data will improve the cost and feasibility of transmitting the images through the space communication network. We evaluate the consequences of the lossy compression algorithm of Bernstein et al. (2010) for the high-precision measurement of weak-lensing galaxy ellipticities. This square-root algorithm compresses each pixel independently, and the information discarded is by construction less than the Poisson error from photon shot noise. For simulated space-based images (without cosmic rays) digitized to the typical 16 bits per pixel, application of the lossy compression followed by image-wise lossless compression yields images with only 2.4 bits per pixel, a factor of 6.7 compression. We demonstrate that this compression introduces no bias in the sky background. The compression introduces a small amount of additional digitization noise to the images, and we demonstrate a corresponding small increase in ellipticity measurement noise. The ellipticity measurement method is biased by the addition of noise, so the additional digitization noise is expected to induce a multiplicative bias on the galaxies' measured ellipticities. After correcting for this known noise-induced bias, we find a residual multiplicative ellipticity bias of m ~ -4x10^{-4}. This bias is small when compared to the many other issues that precision weak lensing surveys must confront, and furthermore we expect it to be reduced further with better calibration of ellipticity measurement methods.

We present the 'simage' software suite for the simulation of artificial extragalactic images, based empirically around real observations of the Hubble Ultra Deep Field (UDF). The simulations reproduce galaxies with realistic and complex morphologies via the modeling of UDF galaxies as shapelets. Images can be created in the B, V, i and z bands for both space- and ground-based telescopes and instruments. The simulated images can be produced for any required field size, exposure time, Point Spread Function (PSF), telescope mirror size, pixel resolution, field star density, and a variety of detector noise sources. It has the capability to create images with both a pre-determined number of galaxies or one calibrated to the number counts of pre-existing data sets such as the HST COSMOS survey. In addition, simple options are included to add a known weak gravitational lensing (both shear and flexion) to the simulated images. The software is available in Interactive Data Language (IDL) and can be freely downloaded for scientific, developmental and teaching purposes.

Upcoming ground and space based observatories such as the DES, the LSST, the JDEM concepts and the SKA, promise to dramatically increase the size of strong gravitational lens samples. A significant fraction of the systems are expected to be time delay lenses. Many of the existing lensing degeneracies become less of an issue with large samples since the distributions of a number of parameters are predictable, and can be incorporated into an analysis, thus helping to lessen the degeneracy. Assuming a mean galaxy density profile that does not evolve with redshift, a Lambda-CDM cosmology, and Gaussian distributions for bulk parameters describing the lens and source populations, we generate synthetic lens catalogues and examine the relationship between constraints on the Omega_m - Omega_Lambda plane and H_0 with increasing lens sample size. We find that, with sample sizes of ~400 time delay lenses, useful constraints can be obtained for Omega_m and Omega_Lambda with approximately similar levels of precision as from the best of other methods. In addition, sample sizes of ~100 time delay systems yield estimates of H_0 with errors of only a couple of percent, exceeding the level of precision from current best estimates such as the HST Key Project. We note that insufficient prior knowledge of the lens samples employed in the analysis, via under or overestimates in the mean values of the sample distributions, results in broadening of constraints. This highlights the need for sound prior knowledge of the sample before useful cosmological constraints can be obtained from large time delay samples (abridged).

There is a vast menagerie of plausible candidates for the constituents of dark matter, both within and beyond extensions of the Standard Model of particle physics. Each of these candidates may have scattering (and other) cross section properties that are consistent with the dark matter abundance, BBN, and the most scales in the matter power spectrum; but which may have vastly different behavior at sub-galactic "cutoff" scales, below which dark matter density fluctuations are smoothed out. The only way to quantitatively measure the power spectrum behavior at sub-galactic scales at distances beyond the local universe, and indeed over cosmic time, is through probes available in multiply imaged strong gravitational lenses. Gravitational potential perturbations by dark matter substructure encode information in the observed relative magnifications, positions, and time delays in a strong lens. Each of these is sensitive to a different moment of the substructure mass function and to different effective mass ranges of the substructure. The time delay perturbations, in particular, are proving to be largely immune to the degeneracies and systematic uncertainties that have impacted exploitation of strong lenses for such studies. There is great potential for a coordinated theoretical and observational effort to enable a sophisticated exploitation of strong gravitational lenses as direct probes of dark matter properties. This opportunity motivates this white paper, and drives the need for: a) strong support of the theoretical work necessary to understand all astrophysical consequences for different dark matter candidates; and b) tailored observational campaigns, and even a fully dedicated mission, to obtain the requisite data.

The Hubble constant can be constrained using the time delays between multiple images of gravitationally lensed sources. In some notable cases, typical lensing analyses assuming isothermal galaxy density profiles produce low values for the Hubble constant, inconsistent with the result of the HST Key Project (72 +- 8 km/s/Mpc). Possible systematics in the values of the Hubble constant derived from galaxy lensing systems can result from a number of factors, e.g. neglect of environmental effects, assumption of isothermality, or contamination by line-of-sight structures. One additional potentially important factor is the triaxial structure of the lensing galaxy halo; most lens models account for halo shape simply by perturbing the projected spherical lensing potential, an approximation that is often necessary but that is inadequate at the levels of triaxiality predicted in the CDM paradigm. To quantify the potential error introduced by this assumption in estimates of the Hubble parameter, we strongly lens a distant galaxy through a sample of triaxial softened isothermal halos and use an MCMC method to constrain the lensing halo profile and the Hubble parameter from the resulting multiple image systems. We explore the major degeneracies between the Hubble parameter and several parameters of the lensing model, finding that without a way to accurately break these degeneracies accurate estimates of the Hubble parameter are not possible. Crucially, we find that triaxiality does not significantly bias estimates of the Hubble constant, and offer an analytic explanation for this behaviour in the case of isothermal profiles. Neglected triaxial halo shape cannot contribute to the low Hubble constant values derived in a number of galaxy lens systems.

We continue to see a range of values for the Hubble constant obtained from gravitationally lensed multiple image time delays when assuming an isothermal lens despite a robust value from the HST key project (72 +- 8 km s^-1 Mpc^-1. One explanation is that there is a variation in Hubble constant values due to a fundamental heterogeneity in lens galaxies present in groups. Our goal is to see if a variety of group interactions between the most massive group members can result in significant changes in the galaxy density profiles over the scale probed by strong lensing (<15 kpc). While stripping of the outer parts of the halo can be expected, the impact on inner regions where the luminous component is important is less clear in the context of lensing, though still crucial, as a steepened density profile within this inner region allows these lens systems to be consistent with current HST/WMAP estimates on H_0. We employ the particle-mesh code SUPERBOX to carry out the group interaction simulations. We simulate interactions between group members, comparing the density profile for the satellite before and after interaction for the mass range of 10^11 to 10^13 M_sun. Our investigations show a significant steepening of the density profile in the region of < 5-20 kpc, i.e. that which dominates strong lensing in lens galaxies. Additionally, the steepening in the inner region is transient in nature, with consecutive interactions returning the profile to an isothermal state within a timeframe of ~ 0.5 - 2.0 Gyr. This factor may help explain why lens galaxies that produce lower values of H_0 (i.e. those with possibly steeper profiles) are far fewer in number than those which agree with both the HST key project value for H_0 and isothermality, since one would have to observe the lens galaxy during this transient steepened phase.

Gravitational lensing time delays depend upon the Hubble constant and the density distribution of the lensing galaxies. This allows one to either model the lens and estimate the Hubble constant, or to use a prior on the Hubble constant from other studies and investigate what the preferred density distribution is. Some studies have required compact dark matter halos (constant M/L ratio) in order to reconcile gravitational lenses with the HST/WMAP value of the Hubble constant (72 +/- 8 km/s /Mpc and 72 +/- 5 km/s /Mpc, respectively). This is in direct contradiction with X-ray, stellar dynamical, and weak lensing studies, which all point towards extended halos and isothermal density profiles. In this work, we examine an up-to-date sample of 13 lensing galaxies resulting in a data set consisting of 21 time delays. We select systems in which there is a single primary lensing galaxy (e.g. excluding systems undergoing mergers). Analysis is performed using analytic models based upon a powerlaw density profile (rho \propto r^-n) of which the isothermal profile is a special case (n = 2). This yields a value of n = 2.11+/-0.12 (3sigma) for the mean profile when modeling with a prior on the Hubble constant, which is only consistent with isothermality within 3 sigma. Note that this is a formal error from our calculations, and does not include the impact of sample selection or simplifications in the lens modeling. We conclude that time delays are a useful probe of density profiles, in particular as a function of the environment in which the lens resides, when combined with a prior on the Hubble constant.