Normalized to: Dietrich, W.
[1]
oai:arXiv.org:2002.09950 [pdf] - 2053438
Mineralogy of a Sulfate-rich Inverted Channel in the Atacama Desert,
Chile: Clues to its Formation and Preservation
Submitted: 2020-02-23
We have performed a stratigraphic and mineralogical analysis of a vertical
transect across a ridge located at the distal end of a system of eroded
alluvial deposits in the northern Atacama Desert of Chile. The ridge, which is
interpreted to be an inverted channel, exhibits a history of sedimentary,
evaporitic, and diagenetic origin that includes groundwater mobilization and
precipitation of anhydrite cements throughout the volume of the ridge. The
ridge consists of two units: a lower one exhibiting a sedimentary and
diagenetic history, and an upper one exhibiting an evaporitic history.
Interbedded in the section are also anhydritic and gypsic paleosols. Two
mechanisms that contribute to channel preservation and inversion are identified
in this case. The first mechanism is the cementation of the volume by anhydrite
cements during early diagenesis, and the second newly identified mechanism is
the armoring of the lateral slopes of the ridge by halite-rich cement. The
slope-conforming armor formed by this second mechanism developed subsequent to
the formation of the ridge as a consequence of the remobilization of soluble
salts. Finally, we identify a series of Ca-sulfate-rich plates on the surface
of the ridge, which we interpret here to form by fracturing and subsequent
erosion of an evaporitic deposit. The plates exhibit a reticulated surface
texture, which we interpret as the result of periodic deliquescence and
reprecipitation of a thin surface film of the evaporite deposits in response to
thick morning fogs that occur in this part of the Atacama. The cross section of
the plates exhibits a thin portion of biological material, which we ascribe to
bacterial mats that take advantage of the deliquescence of the substrate to
obtain their water. This later has important implications in the search for
extant or extinct life on Mars.
[2]
oai:arXiv.org:1909.02407 [pdf] - 2034409
Linking Zonal Winds and Gravity: The Relative Importance of Dynamic Self
Gravity
Submitted: 2019-09-05
Recent precise measurements at Jupiter's and Saturn's gravity fields
constrain the properties of the zonal flows in the outer envelopes of these
planets. A simplified dynamic equation, sometimes called the thermal wind or
thermo-gravitational wind equation, establishes a link between zonal flows and
the related buoyancy perturbation, which in turn can be exploited to yield the
dynamic gravity perturbation. Whether or not the action of the dynamic gravity
perturbation needs to be explicitly included in this equation, an effect we
call the Dynamic Self Gravity (DSG), has been a matter of intense debate. We
show that, under reasonable assumptions, the equation can be solved (semi)
analytically. This allows us to quantify the impact of the DSG on each gravity
harmonic, practically independent of the zonal flow or the details of the
planetary interior model. The impact decreases with growing spherical harmonic
degree l. For degrees l=2 to about l=4, the DSG is a first order effect and
should be taken into account in any attempt of inverting gravity measurements
for zonal flow properties. For degrees of about l=5 to roughly l=10, the
relative impact of DSG is about 10% and thus seems worthwhile to include, in
particular since this comes at little extra costs with the method presented
here. For yet higher degrees, is seems questionable whether gravity
measurements or interior models will ever reach the required precision
equivalent of the DSG impact of only a few percent of less.
[3]
oai:arXiv.org:1906.09061 [pdf] - 1904226
Dynamo Action of Jupiter's Zonal Winds
Submitted: 2019-06-21
The new data delivered by NASA's Juno spacecraft significantly increase our
understanding of Jupiter's internal dynamics. The gravity data constrain the
depth of the zonal flows observed at cloud level and suggest that they slow
down considerably at a depth of about $0.96\,r_J$, where $r_J$ is the mean
radius at the one bar level. Juno's magnetometer reveals the planet's internal
magnetic field. We combine the new zonal flow and magnetic field models with an
updated electrical conductivity profile to assess the zonal wind induced dynamo
action, concentrating on the outer part of Jupiter's molecular hydrogen region
where the conductivity increases very rapidly with depth. Dynamo action remains
quasi-stationary and can thus reasonably be estimated where the magnetic
Reynolds number remains smaller than one, which is roughly the region above
$0.96\,r_J$. We calculate that the locally induced radial magnetic field
reaches rms values of about $10^{-6}\,$T in this region and may just be
detectable by the Juno mission. Very localized dynamo action and a distinct
pattern that reflects the zonal wind system increases the chance to disentangle
this locally induced field from the background field. The estimates of the
locally induced currents also allow calculating the zonal flow related Ohmic
heating and associated entropy production. The respective quantities remain
below new revised predictions for the total dissipative heating and total
entropy production in Jupiter for any of the explored model combinations. Thus
neither Ohmic heating nor entropy production offer additional constraints on
the depth of the zonal winds.
[4]
oai:arXiv.org:1811.04718 [pdf] - 1783080
Penetrative Convection in Partly Stratified Rapidly Rotating Spherical
Shells
Submitted: 2018-11-12
Celestial objects host interfaces between convective and stable stratified
interior regions. The interaction between both, e.g., the transfer of heat,
mass, or angular momentum depends on whether and how flows penetrate into the
stable layer. Powered from the unstable, convective regions, radial flows can
pierce into the stable region depending on their inertia (overshooting). In
rapidly rotating systems, the dynamics are strongly influenced by the Coriolis
force and radial flows penetrate in stratified regions due to the geostrophic
invariance of columnar convection even in the limit of vanishing inertia.
Within this study, we numerically investigate both mechanisms and hence explore
the nature of penetrative convection in rapidly rotating spherical shells. The
study covers a broad range of system parameters, such as the strength of the
stratification relative to the Coriolis force or the inertia. Guided by the
application to Saturn, we model a sandwiched stable stratified layer (SSL)
surrounded by two convective zones. A comprehensive analysis of the damping
behavior of convective flows at the edges of the SSL showed that the mean
penetration depth is controlled by the ratio of stratified and unstratified
buoyancy gradients and is hence independent of rotation. A scaling law is
derived and suggests that the penetration depth decreases with the square root
of the ratio of unstabilizing and stabilizing entropy gradients. The influence
of the Coriolis force, however, is evident by a modulation of the penetration
depth along latitude, since convective columns are elongated vertically and
hence pierce predominantly into the SSL around mid-latitudes and outside the
tangent cylinder. Our result also show that the penetration depth decreases
linearly with the flow length scale (low pass filter), confirming predictions
from the linear theory of rotating partially stratified convection.
[5]
oai:arXiv.org:1801.03262 [pdf] - 1616189
Anelastic spherical dynamos with radially variable electrical
conductivity
Submitted: 2018-01-10
A series of numerical simulations of the dynamo process operating inside gas
giant planets has been performed. We use an anelastic, fully nonlinear,
three-dimensional, benchmarked MHD code to evolve the flow, entropy and
magnetic field. Our models take into account the varying electrical
conductivity, high in the ionised metallic hydrogen region, low in the
molecular outer region. Our suite of electrical conductivity profiles ranges
from Jupiter-like, where the outer hydrodynamic region is quite thin, to
Saturn-like, where there is a thick non-conducting shell. The rapid rotation
leads to the formation of two distinct dynamical regimes which are separated by
a magnetic tangent cylinder - mTC. Outside the mTC there are strong zonal
flows, where Reynolds stress balances turbulent viscosity, but inside the mTC
Lorentz force reduces the zonal flow. The dynamic interaction between both
regions induces meridional circulation. We find a rich diversity of magnetic
field morphologies. There are Jupiter-like steady dipolar fields, and a belt of
quadrupolar dominated dynamos spanning the range of models between Jupiter-like
and Saturn-like conductivity profiles. This diversity may be linked to the
appearance of reversed sign helicity in the metallic regions of our dynamos.
With Saturn-like conductivity profiles we find models with dipolar magnetic
fields, whose axisymmetric components resemble those of Saturn, and which
oscillate on a very long time-scale. However, the non-axisymmetric field
components of our models are at least ten times larger than those of Saturn,
possibly due to the absence of any stably stratified layer.
[6]
oai:arXiv.org:1707.00485 [pdf] - 1585422
Why is solar cycle 24 an inefficient producer of high-energy particle
events?
Submitted: 2017-07-03
The aim of the study is to investigate the reason for the low productivity of
high-energy SEPs in the present solar cycle. We employ scaling laws derived
from diffusive shock acceleration theory and simulation studies including
proton-generated upstream Alfv\'en waves to find out how the changes observed
in the long-term average properties of the erupting and ambient coronal and/or
solar wind plasma would affect the ability of shocks to accelerate particles to
the highest energies. Provided that self-generated turbulence dominates
particle transport around coronal shocks, it is found that the most crucial
factors controlling the diffusive shock acceleration process are the number
density of seed particles and the plasma density of the ambient medium.
Assuming that suprathermal populations provide a fraction of the particles
injected to shock acceleration in the corona, we show that the lack of most
energetic particle events as well as the lack of low charge-to-mass ratio ion
species in the present cycle can be understood as a result of the reduction of
average coronal plasma and suprathermal densities in the present cycle over the
previous one.
[7]
oai:arXiv.org:1609.02405 [pdf] - 1477750
Reversal and amplification of zonal flows by boundary enforced thermal
wind
Submitted: 2016-09-08
Zonal flows in rapidly-rotating celestial objects such as the Sun, gas or ice
giants form in a variety of surface patterns and amplitudes. Whereas the
differential rotation on the Sun, Jupiter and Saturn features a super-rotating
equatorial region, the ice giants, Neptune and Uranus harbour an equatorial jet
slower than the planetary rotation. Global numerical models covering the
optically thick, deep-reaching and rapidly rotating convective envelopes of gas
giants reproduce successfully the prograde jet at the equator. In such models,
convective columns shaped by the dominant Coriolis force typically exhibit a
consistent prograde tilt. Hence angular momentum is pumped away from the
rotation axis via Reynolds stresses. Those models are found to be strongly
geostrophic, hence a modulation of the zonal flow structure along the axis of
rotation, e.g. introduced by persistent latitudinal temperature gradients,
seems of minor importance. Within our study we stimulate these thermal
gradients and the resulting ageostrophic flows by applying an axisymmetric and
equatorially symmetric outer boundary heat flux anomaly ($Y_{20}$) with
variable amplitude and sign. Such a forcing pattern mimics the thermal effect
of intense solar or stellar irradiation. Our results suggest that the
ageostrophic flows are linearly amplified with the forcing amplitude $q^\star$
leading to a more pronounced dimple of the equatorial jet (alike Jupiter). The
geostrophic flow contributions, however, are suppressed for weak $q^\star$, but
inverted and re-amplified once $q^\star$ exceeds a critical value. The inverse
geostrophic differential rotation is consistently maintained by now also
inversely tilted columns and reminiscent of zonal flow profiles observed for
the ice giants. Analysis of the main force balance and parameter studies
further foster these results.
[8]
oai:arXiv.org:1608.01340 [pdf] - 1513611
Geomorphologic Mapping of Titan's Polar Terrains: Constraining Surface
Processes and Landscape Evolution
Birch, Samuel;
Hayes, Alexander;
Dietrich, William;
Howard, Alan;
Bristow, Charlie;
Malaska, Michael;
Moore, Jeff;
Mastrogiuseppe, Marco;
Hofgartner, Jason;
Williams, David;
White, Oliver;
Soderblom, Jason;
Barnes, Jason;
Turtle, Elizabeth;
Lunine, Jonathan;
Wood, Charles;
Neish, Catherine;
Kirk, Randy;
Stofan, Ellen;
Lorenz, Ralph;
Lopes, Rosaly
Submitted: 2016-08-03
We present a geomorphologic map of Titan's polar terrains. The map was
generated from a combination of Cassini Synthetic Aperture Radar (SAR) and
Imaging Science Subsystem imaging products, as well as altimetry, SARTopo and
radargrammetry topographic datasets. In combining imagery with topographic
data, our geomorphologic map reveals a stratigraphic sequence from which we
infer process interactions between units. In mapping both polar regions with
the same geomorphologic units, we conclude that processes that formed the
terrains of the north polar region also acted to form the landscape we observe
at the south. Uniform, SAR-dark plains are interpreted as sedimentary deposits,
and are bounded by moderately dissected uplands. These plains contain the
highest density of filled and empty lake depressions, and canyons. These units
unconformably overlay a basement rock that outcrops as mountains and SAR-bright
dissected terrains at various elevations across both poles. All these units are
then superposed by surficial units that slope towards the seas, suggestive of
subsequent overland transport of sediment. From estimates of the depths of the
embedded empty depressions and canyons that drain into the seas, the SAR-dark
plains must be >600 m thick in places, though the thickness may vary across the
poles. At the lowest elevations of each polar region, there are large seas,
which are currently liquid methane/ethane filled at the north and empty at the
south. The large plains deposits and the surrounding hillslopes may represent
remnant landforms that are a result of previously vast polar oceans, where
larger liquid bodies may have allowed for a sustained accumulation of soluble
and insoluble sediments, potentially forming layered sedimentary deposits.
Coupled with vertical crustal movements, the resulting layers would be of
varying solubilities and erosional resistances.
[9]
oai:arXiv.org:1601.03960 [pdf] - 1346209
Core flows and heat transfer induced by inhomogeneous cooling with sub-
and supercritical convection
Submitted: 2016-01-14
The amount and spatial pattern of heat extracted from cores of terrestrial
planets is ultimately controlled by the thermal structure of the lower rocky
mantle. Using the most common model to tackle this problem, a rapidly rotating
and differentially cooled spherical shell containing an incompressible and
viscous liquid is numerically investigated. To gain the physical basics, we
consider a simple, equatorial symmetric perturbation of the CMB heat flux
shaped as a spherical harmonic $Y_{11}$. The thermodynamic properties of the
induced flows mainly depend on the degree of nonlinearity parametrised by a
horizontal Rayleigh number $Ra_h=q^\ast Ra$, where $q^\ast$ is the relative CMB
heat flux anomaly amplitude and $Ra$ is the Rayleigh number which controls
radial buoyancy-driven convection. Depending on $Ra_h$ we characterise three
flow regimes through their spatial patterns, heat transport and flow speed
scalings: in the linear conductive regime the radial inward flow is found to be
phase shifted $90^\circ$ eastwards from the maximal heat flux as predicted by a
linear quasi-geostrophic model for rapidly rotating spherical systems. The
advective regime is characterised by an increased $Ra_h$ where nonlinearities
become significant, but is still subcritical to radial convection. There the
upwelling is dispersed and the downwelling is compressed by the thermal
advection into a spiralling jet-like structure. As $Ra_h$ becomes large enough
for the radial convection to set in, the jet remains identifiable on
time-average and significantly alters the global heat budget in the convective
regime. Our results suggest, that the boundary forcing not only introduces a
net horizontal heat transport but also suppresses the convection locally to
such an extent, that the net Nusselt number is reduced by up to 50\%, even
though the mean CMB heat flux is conserved.
[10]
oai:arXiv.org:1511.01389 [pdf] - 1305786
Effect of width, amplitude, and position of a core mantle boundary hot
spot on core convection and dynamo action
Submitted: 2015-11-04
Within the fluid iron cores of terrestrial planets, convection and the
resulting generation of global magnetic fields are controlled by the overlying
rocky mantle. The thermal structure of the lower mantle determines how much
heat is allowed to escape the core. Hot lower mantle features, such as the
thermal footprint of a giant impact or hot mantle plumes, will locally reduce
the heat flux through the core mantle boundary (CMB), thereby weakening core
convection and affecting the magnetic field generation process. In this study,
we numerically investigate how parametrised hot spots at the CMB with arbitrary
sizes, amplitudes, and positions affect core convection and hence the dynamo.
The effect of the heat flux anomaly is quantified by changes in global flow
symmetry properties, such as the emergence of equatorial antisymmetric,
axisymmetric (EAA) zonal flows. For purely hydrodynamic models, the EAA
symmetry scales almost linearly with the CMB amplitude and size, whereas
self-consistent dynamo simulations typically reveal either suppressed or
drastically enhanced EAA symmetry depending mainly on the horizontal extent of
the heat flux anomaly. Our results suggest that the length scale of the anomaly
should be on the same order as the outer core radius to significantly affect
flow and field symmetries. As an implication to Mars and in the range of our
model, the study concludes that an ancient core field modified by a CMB heat
flux anomaly is not able to heterogeneously magnetise the crust to the
present-day level of north--south asymmetry on Mars. The resulting magnetic
fields obtained using our model either are not asymmetric enough or, when they
are asymmetric enough, show rapid polarity inversions, which are incompatible
with thick unidirectional magnetisation.
[11]
oai:arXiv.org:1402.0343 [pdf] - 779251
Hemispherical Parker waves driven by thermal shear in planetary dynamos
Submitted: 2014-02-03
Planetary and stellar magnetic fields are thought to be sustained by helical
motions ($\alpha$-effect) and, if present, differential rotation
($\Omega$-effect). In the Sun, the strong differential rotation in the
tachocline is responsible for an efficient $\Omega$-effect creating a strong
axisymmetric azimuthal magnetic field. This is a prerequisite for Parker dynamo
waves that may be responsible for the solar cycle. In the liquid iron cores of
terrestrial planets, the Coriolis force organizes convection into columns with
a strong helical flow component. These likely dominate magnetic field
generation while the $\Omega$-effect is of secondary importance. Here we use
numerical simulations to show that the planetary dynamo scenario may change
when the heat flux through the outer boundary is higher in one hemisphere than
in the other. A hemispherical dynamo is promoted that is dominated by fierce
thermal wind responsible for a strong $\Omega$-effect. As a consequence Parker
dynamo waves are excited equivalent to those predicted for the Sun. They obey
the same dispersion relation and propagation characteristics. We suggest that
Parker waves may therefore also play a role in planetary dynamos for all
scenarios where zonal flows become an important part of convective motions.
[12]
oai:arXiv.org:1402.0337 [pdf] - 779249
A hemispherical dynamo model : Implications for the Martian crustal
magnetization
Submitted: 2014-02-03
Mars Global Surveyor measurements revealed that the Martian crust is strongly
magnetized in the southern hemisphere while the northern hemisphere is
virtually void of magnetization. Two possible reasons have been suggested for
this dichotomy: A once more or less homogeneously magnetization may have been
destroyed in the northern hemisphere by, for example, resurfacing or impacts.
The alternative theory we further explore here assumes that the dynamo itself
produced a hemispherical field. We use numerical dynamo simulations to study
under which conditions a spatial variation of the heat flux through the
core-mantle boundary (CMB) may yield a strongly hemispherical surface field. We
assume that the early Martian dynamo was exclusively driven by secular cooling
and we mostly concentrate on a cosine CMB heat flux pattern with a minimum at
the north pole, possibly caused by the impacts responsible for the northern
lowlands. This pattern consistently triggers a convective mode which is
dominated by equatorially anti-symmetric and axisymmetric (EAA) thermal winds.
Convective up- and down-wellings and thus radial magnetic field production then
tend to concentrate in the southern hemisphere which is still cooled
efficiently while the northern hemisphere remains hot. The dynamo changes from
an alpha^2- for a homogeneous CMB heat flux to an alpha-Omega-type in the
hemispherical configuration. These dynamos reverse on time scales of about 10
kyrs. This too fast to allow for the more or less unidirectional magnetization
of thick crustal layer required to explain the strong magnetization in the
southern hemisphere.
[13]
oai:arXiv.org:1101.0253 [pdf] - 1042824
Chaos, storms and climate on Mars
Submitted: 2010-12-31
Channel networks on the plateau adjacent to Juventae Chasma have the highest
drainage densities reported on Mars.We model frozen precipitation on the
Juventae plateau,finding that the trigger for forming these channel networks
could have been ephemeral lakeshore precipitation,and that they do not require
past temperatures higher than today.If short-lived and localized events explain
some dendritic channel networks on Mars, this would weaken the link between
dendritic valley networks and surface climate conditions that could sustain
life. Our analysis uses MRAMS simulations and HiRISE DTMs.We model localized
weather systems driven by water vapor release from ephemeral lakes during
outflow channel formation.At Juventae Chasma,mean snowfall reaches a maximum of
0.9mm/hr water equivalent on the SW rim of the chasm.Radiative effects of the
thick cloud cover raise maximum (minimum, mean) plateau surface temperatures by
up to 24K(9K, 17K)locally.The key result is that the area of maximum modeled
precipitation shows a striking correspondence to the mapped Juventae plateau
channel networks.Three independent methods show this fit is unlikely to be due
to chance.We use a snowpack energy balance model to show that if the snow has
the albedo of dust(0.28), and for a solar luminosity of 0.8($\equiv$3.0Gya),
then if the atmospheric greenhouse effect is unchanged from(6K warmer
than)today only 0.4%(21%)of lake-induced precipitation events produce snowpack
that undergoes melting.However, warming from associated dense cloud cover would
allow melting over a wider range of conditions.In these localized precipitation
scenarios, global temperatures need not be higher than today, and the rest of
the planet remains dry.
[14]
oai:arXiv.org:1012.5077 [pdf] - 391289
Localized precipitation and runoff on Mars
Submitted: 2010-12-22
We use the Mars Regional Atmospheric Modeling System (MRAMS) to simulate lake
storms on Mars, finding that intense localized precipitation will occur for
lake size >=10^3 km^2. Mars has a low-density atmosphere, so deep convection
can be triggered by small amounts of latent heat release. In our reference
simulation, the buoyant plume lifts vapor above condensation level, forming a
20km-high optically-thick cloud. Ice grains grow to 200 microns radius and fall
near (or in) the lake at mean rates up to 1.5 mm/hr water equivalent (maximum
rates up to 6 mm/hr water equivalent). Because atmospheric temperatures outside
the surface layer are always well below 273K, supersaturation and condensation
begin at low altitudes above lakes on Mars. In contrast to Earth lake-effect
storms, lake storms on Mars involve continuous precipitation, and their
vertical velocities and plume heights exceed those of tropical thunderstorms on
Earth. Convection does not reach above the planetary boundary layer for lakes
<<10^3 km^2 or for atmospheric pressure >O(10^2) mbar. Instead, vapor is
advected downwind with little cloud formation. Precipitation occurs as snow,
and the daytime radiative forcing at the land surface due to plume vapor and
storm clouds is too small to melt snow directly (<+10 W/m^2). However, if
orbital conditions are favorable, then the snow may be seasonally unstable to
melting and produce runoff to form channels. We calculate the probability of
melting by running thermal models over all possible orbital conditions and
weighting their outcomes by probabilities given by Laskar et al., 2004. We
determine that for an equatorial vapor source, sunlight 15% fainter than at
present, and snowpack with albedo 0.28 (0.35), melting may occur with 4%(0.1%)
probability. This rises to 56%(12%) if the ancient greenhouse effect was
modestly (6K) greater than today.