We search for passive galaxies at $z>3$ in the GOODS-South field, using different techniques based on photometric data, and paying attention to develop methods that are sensitive to objects that have become passive shortly before the epoch of observation. We use CANDELS HST catalogues, ultra-deep $Ks$ data and new IRAC photometry, performing spectral energy distribution fitting using models with abruptly quenched star formation histories. We then single out galaxies which are best fitted by a passively evolving model, and having only low probability $( < 5 \%)$ star-forming solutions. We verify the effects of including nebular lines emission, and we consider possible solutions at different redshifts. The number of selected sources dramatically depends on the models used in the SED fitting. Without including emission lines and with photometric redshifts fixed at the CANDELS estimate, we single out 30 candidates; the inclusion of nebular lines emission reduces the sample to 10 objects; allowing for solutions at different redshifts, only 2 galaxies survive as robust candidates. Most of the candidates are not far-infrared emitters, corroborating their association with passive galaxies. Our results translate into an upper limit in the number density of $\sim 0.173$ arcmin$^2$ above the detection limit. However, we conclude that the selection of passive galaxies at $z>3$ is still subject to significant uncertainties, being sensitive to assumptions in the SED modeling adopted and to the relatively low S/N of the objects. By means of dedicated simulations, we show that JWST will greatly enhance the accuracy, allowing for a much more robust classification.

We present the multiwavelength photometry of two Frontier Fields massive galaxy clusters MACS-J0717 and MACS-J1149 and their parallel fields, ranging from HST to ground based K and Spitzer IRAC bands, and the public release of photometric redshifts and rest frame properties of galaxies found in cluster and parallel pointings. This work was done within ASTRODEEP project and aims to provide a reference for future investigations of the extragalactic populations. To fully exploit the depth of the images and detect faint sources we used an accurate procedure which carefully removes the foreground light of bright cluster sources and the intra-cluster light thus enabling detection and measurement of accurate fluxes in crowded cluster regions. This same procedure has been successfully used to derive the photometric catalogue of MACS-J0416 and Abell-2744. The obtained multi-band photometry was used to derive photometric redshifts, magnification and physical properties of sources. In line with the first two FF catalogues released by ASTRODEEP, the photometric redshifts reach $\sim$4$\%$ accuracy. Moreover we extend the presently available samples to galaxies intrinsically as faint as H160$\sim$32-34 mag thanks the magnification factors induced to strong gravitational lensing. Our analysis allows us to probe galaxy masses larger then 10$^{7}$ M$\odot$ and/or SFR=0.1-1M$\odot$/yr out to redshift z$>6$.

We lay the foundations of a statistical framework for multi-catalogue cross-correlation and cross-identification based on explicit simplified catalogue models. A proper identification process should rely on both astrometric and photometric data. Under some conditions, the astrometric part and the photometric part can be processed separately and merged a posteriori to provide a single global probability of identification. The present paper addresses almost exclusively the astrometrical part and specifies the proper probabilities to be merged with photometric likelihoods. To select matching candidates in n catalogues, we used the Chi (or, indifferently, the Chi-square) test with 2(n-1) degrees of freedom. We thus call this cross-match a chi-match. In order to use Bayes' formula, we considered exhaustive sets of hypotheses based on combinatorial analysis. The volume of the Chi-test domain of acceptance -- a 2(n-1)-dimensional acceptance ellipsoid -- is used to estimate the expected numbers of spurious associations. We derived priors for those numbers using a frequentist approach relying on simple geometrical considerations. Likelihoods are based on standard Rayleigh, Chi and Poisson distributions that we normalized over the Chi-test acceptance domain. We validated our theoretical results by generating and cross-matching synthetic catalogues. The results we obtain do not depend on the order used to cross-correlate the catalogues. We applied the formalism described in the present paper to build the multi-wavelength catalogues used for the science cases of the ARCHES (Astronomical Resource Cross-matching for High Energy Studies) project. Our cross-matching engine is publicly available through a multi-purpose web interface. In a longer term, we plan to integrate this tool into the CDS XMatch Service.

We present the new release v2.0 of T-PHOT, a publicly available software package developed to perform PSF-matched, prior-based, multiwavelength deconfusion photometry of extragalactic fields. New features included in the code are presented and discussed: background estimation, fitting using position dependent kernels, flux prioring, diagnostical statistics on the residual image, exclusion of selected sources from the model and residual images, individual registration of fitted objects. These new options improve on the performance of the code, allowing for more accurate results and providing useful aids for diagnostics.

Improving the capabilities of detecting faint X-ray sources is fundamental to increase the statistics on faint high-z AGN and star-forming galaxies. We performed a simultaneous Maximum Likelihood PSF fit in the [0.5-2] keV and [2-7] keV energy bands of the 4 Ms{\em Chandra} Deep Field South (CDFS) data at the position of the 34930 CANDELS H-band selected galaxies. For each detected source we provide X-ray photometry and optical counterpart validation. We validated this technique by means of a raytracing simulation. We detected a total of 698 X-ray point-sources with a likelihood $\mathcal{L}$$>$4.98 (i.e. $>$2.7$\sigma$). We show that the prior knowledge of a deep sample of Optical-NIR galaxies leads to a significant increase of the detection of faint (i.e. $\sim$10$^{-17}$ cgs in the [0.5-2] keV band) sources with respect to "blind" X-ray detections. By including previous X-ray catalogs, this work increases the total number of X-ray sources detected in the 4 Ms CDFS, CANDELS area to 793, which represents the largest sample of extremely faint X-ray sources assembled to date. Our results suggest that a large fraction of the optical counterparts of our X-ray sources determined by likelihood ratio actually coincides with the priors used for the source detection. Most of the new detected sources are likely star-forming galaxies or faint absorbed AGN. We identified a few sources sources with putative photometric redshift z$>$4. Despite the low number statistics and the uncertainties on the photo-z, this sample significantly increases the number of X--ray selected candidate high-z AGN.

We present multiwavelength photometric catalogues (HST, Spitzer and Hawk-I K band) for the first two of the Frontier Fields, Abell2744 and MACSJ0416 (plus their parallel fields). To detect faint sources even in the central regions of the clusters, we develop a robust and repeatable procedure that uses the public codes Galapagos and Galfit to model and remove most of the light contribution from both the brightest cluster members as well as the ICL. We perform the detection on the HST H160 processed image to obtain a pure H-selected sample. We also add a sample of sources which are undetected in the H160 image but appear on a stacked infrared image. Photometry in the other HST bands is obtained using SExtractor, performed again on residual images after the Galfit procedure for foreground light removal. Photometry on the Hawk-I and IRAC bands has been obtained using our PSF-matching deconfusion code T-PHOT. A similar procedure, but without the need for the foreground light removal, is adopted for the Parallel fields. The procedure allows for the detection and the photometric measurements of ~2500 sources per field. We deliver and release complete photometric H-detected catalogues, with the addition of a complementary sample of infrared-detected sources. All objects have multiwavelength coverage including B to H HST bands, plus K band from Hawk-I, and 3.6 - 4.5 {\mu}m from Spitzer. Full and detailed treatment of photometric errors is included. We perform basic sanity checks on the reliability of our results. The multiwavelength catalogues are publicly available and are ready to be used for scientific purposes. Our procedures allows for the detection of outshined objects near the bright galaxies, which, coupled with the magnification effect of the clusters, can reveal extremely faint high redshift sources. Full analysis on photometric redshifts is presented in a companion Paper II. [abridged]

We present the first public release of photometric redshifts, galaxy rest-frame properties and associated magnification values in the cluster and parallel pointings of the first two Frontier Fields, Abell-2744 and MACS-J0416. We exploit a multi-wavelength catalogue ranging from HST to ground-based K and Spitzer IRAC which is specifically designed to enable detection and measurement of accurate fluxes in crowded cluster regions. The multi-band information is used to derive photometric redshifts and physical properties of sources detected either in the H-band image alone or from a stack of four WFC3 bands. To minimize systematics median photometric redshifts are assembled from six different approaches to photo-z estimates. Their reliability is assessed through a comparison with available spectroscopic samples. State of the art lensing models are used to derive magnification values on an object-by-object basis by taking into account sources positions and redshifts. We show that photometric redshifts reach a remarkable ~3-5% accuracy. After accounting for magnification the H band number counts are found in agreement at bright magnitudes with number counts from the CANDELS fields, while extending the presently available samples to galaxies intrinsically as faint as H160~32-33 thanks to strong gravitational lensing. The Frontier Fields allow to probe the galaxy stellar mass distribution at 0.5-1.5 dex lower masses, depending on magnification, with respect to extragalactic wide fields, including sources at Mstar~ 10^7-10^8 Msun at z>5. Similarly, they allow the detection of objects with intrinsic SFRs>1dex lower than in the CANDELS fields reaching 0.1-1 Msun/yr at z~6-10. [abridged]

We present a new method to search for candidate z~>2 Herschel 500{\mu}m sources in the GOODS-North field, using a S500{\mu}m/S24{\mu}m "color deconfusion" technique. Potential high-z sources are selected against low-redshift ones from their large 500{\mu}m to 24{\mu}m flux density ratios. By effectively reducing the contribution from low-redshift populations to the observed 500{\mu}m emission, we are able to identify counterparts to high-z 500{\mu}m sources whose 24{\mu}m fluxes are relatively faint. The recovery of known z~4 starbursts confirms the efficiency of this approach in selecting high-z Herschel sources. The resulting sample consists of 34 dusty star-forming galaxies at z~>2. The inferred infrared luminosities are in the range 1.5x10^12-1.8x10^13 Lsun, corresponding to dust-obscured star formation rates (SFRs) of ~260-3100 Msun/yr for a Salpeter IMF. Comparison with previous SCUBA 850{\mu}m-selected galaxy samples shows that our method is more efficient at selecting high-z dusty galaxies with a median redshift of z=3.07+/-0.83 and 10 of the sources at z~>4. We find that at a fixed luminosity, the dust temperature is ~5K cooler than that expected from the Td-LIR relation at z<1, though different temperature selection effects should be taken into account. The radio-detected subsample (excluding three strong AGN) follows the far-infrared/radio correlation at lower redshifts, and no evolution with redshift is observed out to z~5, suggesting that the far-infrared emission is star formation dominated. The contribution of the high-z Herschel 500{\mu}m sources to the cosmic SFR density is comparable to that of SMG populations at z~2.5 and at least 40% of the extinction-corrected UV samples at z~4 (abridged).

We present T-PHOT, a publicly available software aimed at extracting accurate photometry from low-resolution images of deep extragalactic fields, where the blending of sources can be a serious problem for the accurate and unbiased measurement of fluxes and colours. T-PHOT has been developed within the ASTRODEEP project and it can be considered as the next generation to TFIT, providing significant improvements above it and other similar codes. T-PHOT gathers data from a high-resolution image of a region of the sky, and uses it to obtain priors for the photometric analysis of a lower resolution image of the same field. It can handle different types of datasets as input priors: i) a list of objects that will be used to obtain cutouts from the real high-resolution image; ii) a set of analytical models; iii) a list of unresolved, point-like sources, useful e.g. for far-infrared wavelength domains. We show that T-PHOT yields accurate estimations of fluxes within the intrinsic uncertainties of the method, when systematic errors are taken into account (which can be done thanks to a flagging code given in the output). T-PHOT is many times faster than similar codes like TFIT and CONVPHOT (up to hundreds, depending on the problem and the method adopted), whilst at the same time being more robust and more versatile. This makes it an optimal choice for the analysis of large datasets. In addition we show how the use of different settings and methods significantly enhances the performance. Given its versatility and robustness, T-PHOT can be considered the preferred choice for combined photometric analysis of current and forthcoming extragalactic optical to far-infrared imaging surveys. [abridged]

This document describes a recommended syntax for writing the string representation of unit labels ("VOUnits"). In addition, it describes a set of recognised and deprecated units, which is as far as possible consistent with other relevant standards (BIPM, ISO/IEC and the IAU). The intention is that units written to conform to this specification will likely also be parsable by other well-known parsers. To this end, we include machine-readable grammars for other units syntaxes.

Scientific exploitation of the ever increasing volumes of astronomical data requires efficient and practical methods for data access, visualisation, and analysis. Hierarchical sky tessellation techniques enable a multi-resolution approach to organising data on angular scales from the full sky down to the individual image pixels. Aims. We aim to show that the Hierarchical progressive survey (HiPS) scheme for describing astronomical images, source catalogues, and three-dimensional data cubes is a practical solution to managing large volumes of heterogeneous data and that it enables a new level of scientific interoperability across large collections of data of these different data types. Methods. HiPS uses the HEALPix tessellation of the sphere to define a hierarchical tile and pixel structure to describe and organise astronomical data. HiPS is designed to conserve the scientific properties of the data alongside both visualisation considerations and emphasis on the ease of implementation. We describe the development of HiPS to manage a large number of diverse image surveys, as well as the extension of hierarchical image systems to cube and catalogue data. We demonstrate the interoperability of HiPS and Multi-Order Coverage (MOC) maps and highlight the HiPS mechanism to provide links to the original data. Results. Hierarchical progressive surveys have been generated by various data centres and groups for ~200 data collections including many wide area sky surveys, and archives of pointed observations. These can be accessed and visualised in Aladin, Aladin Lite, and other applications. HiPS provides a basis for further innovations in the use of hierarchical data structures to facilitate the description and statistical analysis of large astronomical data sets.

This paper presents a tutorial explaining the use of Virtual Observatory tools in high energy astrophysics. Most of the tools used in this paper were developed at the Strasbourg astronomical Data Center and we show how they can be applied to conduct a multi-instrument, multi-wavelength analysis of sources detected by the High Energy Stereoscopic System and the Fermi Large Area Telescope. The analysis involves queries of different data catalogs, selection and cross-correlation techniques on multi-waveband images, and the construction of high energy color-color plots and multi-wavelength spectra. The tutorial is publicly available on the website of the European Virtual Observatory project.

The Photometry Data Model (PhotDM) standard describes photometry filters, photometric systems, magnitude systems, zero points and its interrelation with the other IVOA data models through a simple data model. Particular attention is given necessarily to optical photometry where specifications of magnitude systems and photometric zero points are required to convert photometric measurements into physical flux density units.

We present a data model describing the structure of spectrophotometric datasets with spectral and temporal coordinates and associated metadata. This data model may be used to represent spectra, time series data, segments of SED (Spectral Energy Distributions) and other spectral or temporal associations.

Astronomy has long had a working network of archives supporting the curation of publications and data. The discipline has already created many of the features which perplex other areas of science: (1) data repositories: (supra)national institutes, dedicated to large projects; a culture of user-contributed data; practical experience of long-term data preservation; (2) dataset identifiers: the community has already piloted experiments, knows what can undermine these efforts, and is participating in the development of next-generation standards; (3) citation of datasets in papers: the community has an innovative and expanding infrastructure for the curation of data and bibliographic resources, and through them a community of author s and editors familiar with such electronic publication efforts; as well, it has experimented with next-generation web standards (e.g. the Semantic Web); (4) publisher buy-in: publishers in this area have been willing to innovate within the constraints of their commercial imperatives. What can possibly be missing? Why don't we have an integrated framework for the publication and preservation of all data products already? Are there technical barriers? We don't believe so. Are there cultural or commercial forces inhibiting this? We aren't aware of any. This Birds of a Feather session (BoF) attempted to identify existing barriers to the creation of such a framework, and attempted to identify the parties or groups which can contribute to the creation of a VO-powered data-publishing framework.

This document specifies a standard format for vocabularies based on the W3C's Resource Description Framework (RDF) and Simple Knowledge Organization System (SKOS). By adopting a standard and simple format, the IVOA will permit different groups to create and maintain their own specialised vocabularies while letting the rest of the astronomical community access, use, and combine them. The use of current, open standards ensures that VO applications will be able to tap into resources of the growing semantic web. The document provides several examples of useful astronomical vocabularies.

This document describes the current understanding of the IVOA controlled vocabulary for describing astronomical data quantities, called Unified Content Descriptors (UCDs). The present document defines a new standard (named UCD1+) improving the first generation of UCDs (hereafter UCD1). The basic idea is to adopt a new syntax and vocabulary requiring little effort for people to adapt softwares already using UCD1. This document also addresses the questions of maintenance and evolution of the UCD1+. Examples of use cases within the VO, and tools for using UCD1+ are also described.

According to what is stated in the IVOA Recommendation "An IVOA standard for Unified Content Descriptors", a procedural document should be created in order to maintain (add, change, suppress words) the standard list of UCD1+ words "The UCD1+ Controlled Vocabulary". This document describes the procedure to maintain the standard list of UCD1+ words.

This document describes the list of controlled terms used to build the Unified Content Descriptors, Version 1+ (UCD1+). The document describing the UCD1+ can be found at the URL: http://www.ivoa.net/Documents/latest/UCD.html. This document reviews the structure of the UCD1+ and presents the current vocabulary.

The Survey Science Centre of the XMM-Newton satellite released the first incremental version of the 2XMM catalogue in August 2008 . With more than 220,000 X-ray sources, the 2XMMi was at that time the largest catalogue of X-ray sources ever published and thus constitutes an unprecedented resource for studying the high-energy properties of various classes of X-ray emitters such as AGN and stars. The advent of the 7th release of the Sloan Digital Sky Survey offers the opportunity to cross-match two major surveys and extend the spectral energy distribution of many 2XMMi sources towards the optical bands. We here present a cross-matching algorithm based on the classical likelihood ratio estimator. The method developed has the advantage of providing true probabilities of identifications without resorting to Monte-Carlo simulations. Over 30,000 2XMMi sources have SDSS counterparts with individual probabilities of identification higher than 90%. Using spectroscopic identifications from the SDSS DR7 catalogue supplemented by extraction from other catalogues, we build an identified sample from which the way the various classes of X-ray emitters gather in the multi dimensional parameter space can be analysed. We investigate two scientific use cases. In the first example we show how these multi-wavelength data can be used to search for new QSO2s. Although no specific range of observed properties allows us to identify Compton Thick QSO2s, we show that the prospects are much better for Compton Thin AGN2 and discuss several possible multi-parameter selection strategies. In a second example, we confirm the hardening of the mean X-ray spectrum with increasing X-ray luminosity on a sample of over 500 X-ray active stars and reveal that on average X-ray active M stars display bluer $g-r$ colour indexes than less active ones (abridged).

The new release of the SPECFIND radio cross-identification catalogue, SPECFIND V2.0, is presented. It contains 107488 cross-identified objects with at least three radio sources observed at three independent frequencies. Compared to the previous release the number of entry radio catalogues is increased from 20 to 97 containing 115 tables. This large increase was only made possible by the development of four tools at CDS which use the standards and infrastructure of the Virtual Observatory (VO). This was done in the framework of the VO-TECH European Design Study of the Sixth Framework Program. We give an overview of the different classes of radio sources that a user can encounter. Due to the increase of frequency coverage of the input radio catalogues, this release demonstrates that the SPECFIND algorithm is able to detect spectral breaks around a frequency of ~1 GHz.

ClassX is a project aimed at creating an automated system to classify X-ray sources and is envisaged as a prototype of the Virtual Observatory. As a system, ClassX integrates into a pipeline a network of classifiers and an engine that searches and retrieves for a given target multi-wavelength counterparts from the worldwide data storage media. It applies machine learning methods to `train' different classifiers using different `training' data sets. In ClassX, each classifier can make its own class (object type) assignment and is optimized for handling different tasks and/or different object types. A user would generally select a certain classifier to make, for instance, a most complete list of candidate QSOs, but a different classifier would be used to make a most reliable list of candidate QSOs. Still different classifiers would be selected to make similar lists for other object types. Along with the class name assignment, a network classifier outputs the probability for a source to belong to the assigned class as well as probabilities that the source belongs in fact to other classes. We illustrate the current capabilities of ClassX and the concept of a classifiers network with the results obtained with classifiers trained using ROSAT data. ~