We present a mock stellar catalog, matching in volume, depth and data model the content of the planned Gaia early data release 3 (Gaia EDR3). We have generated our catalog (GeDR3mock) using galaxia, a tool to sample stars from an underlying Milky Way (MW) model or from N-body data. We used an updated Besan\c{c}on Galactic model together with the latest PARSEC stellar evolutionary tracks, now also including white dwarfs. We added the Magellanic clouds and realistic open clusters with internal rotation. We empirically modelled uncertainties based on Gaia DR2 (GDR2) and scaled them according to the longer baseline in Gaia EDR3. The apparent magnitudes were reddened according to a new selection of 3D extinction maps. To help with the Gaia selection function we provide all-sky magnitude limit maps in G and BP for a few relevant GDR2 subsets together with the routines to produce these maps for user-defined subsets. We supplement the catalog with photometry and extinctions in non-Gaia bands. The catalog is available in the Virtual Observatory and can be queried just like the actual Gaia EDR3 will be. We highlight a few capabilities of the Astronomy Data Query Language (ADQL) with educative catalog queries. We use the data extracted from those queries to compare GeDR3mock to GDR2, which emphasises the importance of adding observational noise to the mock data. Since the underlying truth, e.g. stellar parameters, is know in GeDR3mock, it can be used to construct priors as well as mock data tests for parameter estimation. All code, models and data used to produce GeDR3mock are linked and contained in galaxia_wrap, a python package, representing a fast galactic forward model, able to project MW models and N-body data into realistic Gaia observables.

Accurate atomic data is an essential ingredient for the calculation of reliable non-local thermodynamic equilibrium (NLTE) model atmospheres that are mandatory for the spectral analysis of hot stars. We aim to search for and identify for the first time spectral lines of copper (atomic number Z = 29) and indium (Z = 49) in hot white dwarf (WD) stars and to subsequently determine their photospheric abundances. Oscillator strengths of Cu IV - VII were calculated to include radiative and collisional bound-bound transitions of Cu in our NLTE model-atmosphere calculations. Oscillator strengths of In IV - VI were compiled from the literature. We newly identified 1 Cu IV, 51 Cu V, 2 Cu VI, and 5 In Vlines in the ultraviolet (UV) spectrum of DO-type WD RE 0503-289. We determined the photospheric abundances of 9.3 X 10**-5 (mass fraction, 132 times solar) and 3.0 X 10**-5 (56 600 times solar), respectively; we also found Cu overabundances in the DA-type WD G191-B2B (6.3 X 10**-6, 9 times solar). All identified Cu IV - VI lines in the UV spectrum of RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths. With the detection of Cu and In in RE 0503-289, the total number of trans-iron elements (Z > 28) in this extraordinary WD reaches an unprecedented number of 18.

MASER (Measurements, Analysis, and Simulation of Emission in the Radio range) is a comprehensive infrastructure dedicated to time-dependent low frequency radio astronomy (up to about 50 MHz). The main radio sources observed in this spectral range are the Sun, the magnetized planets (Earth, Jupiter, Saturn), and our Galaxy, which are observed either from ground or space. Ground observatories can capture high resolution data streams with a high sensitivity. Conversely, space-borne instruments can observe below the ionospheric cut-off (at about 10 MHz) and can be placed closer to the studied object. Several tools have been developed in the last decade for sharing space physics data. Data visualization tools developed by various institutes are available to share, display and analyse space physics time series and spectrograms. The MASER team has selected a sub-set of those tools and applied them to low frequency radio astronomy. MASER also includes a Python software library for reading raw data from agency archives.

The European Open Science Cloud (EOSC) is in its early stages, but already some aspects of the EOSC vision are starting to become reality, for example the EOSC portal and the development of metadata catalogues. In the astrophysical domain already exists an open approach to science data: the Virtual Observatory view put in place by the International Virtual Observatory Alliance (IVOA) architecture of standards. The ESCAPE (European Science Cluster of Astronomy & Particle physics ESFRI research infrastructures) project has, among its tasks, to demonstrate that the VO architecture can be integrated within the EOSC building one and to provide guidelines to ESFRI partners (European Strategy Forum on Research Infrastructures) in doing this. This contribution reports on the progress of this integration after the first months of work inside ESCAPE.

Context: Astrometric gravitational microlensing is an excellent tool to determine the mass of stellar objects. Using precise astrometric measurements of the lensed position of a background source in combination with accurate predictions of the positions of the lens and the unlensed source it is possible to determine the mass of the lens with an accuracy of a few percent. Aims: Making use of the recently published Gaia Data Release 2 (DR2) catalogue, we want to predict astrometric microlensing events caused by foreground stars with high proper motion passing a background source in the coming decades. Methods: We selected roughly 148 000 high-proper-motion stars from Gaia DR2 with $\mu_{tot} > 150\,\mathrm{mas/yr}$ as potential lenses. We then searched for background sources close to their paths. Using the astrometric parameters of Gaia DR2, we calculated the future positions of source and lens. With a nested-intervals algorithm we determined the date and separation of the closest approach. Using Gaia DR2 photometry we determined an approximate mass of the lens, which we used to calculate the expected microlensing effects. Results: We predict 3914 microlensing events caused by 2875 different lenses between 2010 and 2065, with expected shifts larger than $0.1\,\mathrm{mas}$ between the lensed and unlensed positions of the source. Of those, 513 events are expected to happen between 2014.5 - 2026.5 and might be measured by Gaia. For 127 events we also expect a magnification between $1\,\mathrm{mmag}$ and $3\,\mathrm{mag}$.

Context. Astrometric microlensing is an excellent tool to determine the mass of a stellar object. By measuring the astrometric shift of a background source star in combination with precise predictions of its unlensed position and of the lens position, gravitational lensing allows to determine the mass of the lensing star with a precision of 1 percent, independent of any prior knowledge. Aims. Making use of the recently published Gaia Data Release 2 (Gaia DR2) we predict astrometric microlensing events by foreground stars of high proper motion passing by a background star in the coming years. Methods. We compile a list of ~148.000 high-proper-motion stars within Gaia DR2 with $\mu_{tot}$ > 150 mas/yr. We then search for background stars close to their paths and calculate the dates and separations of the closest approaches. Using color and absolute magnitude, we determine approximate masses of the lenses. Finally, we calculate the expected astrometric shifts and magnifications of the predicted events. Results . We detect two ongoing microlensing events by the high proper motion stars Luyten 143-23 and Ross 322 and predict closest separations of (108.5 $\pm$ 1.4) mas in July 2018 and (125.3 $\pm$ 3.4) mas in August 2018, respectively. The respective expected astrometric shifts are (1.74 $\pm$ 0.12) mas and (0.76 $\pm$ 0.06) mas. Furthermore, Luyten 143-23 will pass by another star in March 2021 with a closest separation of (280.1 $\pm$ 1.1) mas, which results in an expected shift of (0.69 $\pm$ 0.05) mas.

We present a mock catalog of Milky Way stars, matching in volume and depth the content of the Gaia data release 2 (GDR2). We generated our catalog using Galaxia, a tool to sample stars from a Besancon Galactic model, together with a realistic 3D dust extinction map. The catalog mimicks the complete GDR2 data model and contains most of the entries in the Gaia source catalog: 5-parameter astrometry, 3-band photometry, radial velocities, stellar parameters, and associated scaled nominal uncertainty estimates. In addition, we supplemented the catalog with extinctions and photometry for non-Gaia bands. This catalog can be used to prepare GDR2 queries in a realistic runtime environment, and it can serve as a Galactic model against which to compare the actual GDR2 data in the space of observables. The catalog is hosted through the virtual observatory GAVO's Heidelberg data center service and thus can be queried using ADQL as for GDR2 data.

The German Astrophysical Virtual Observatory (GAVO) developed the registered service TheoSSA (theoretical stellar spectra access) and the supporting registered VO tool TMAW (Tuebingen Model-Atmosphere WWW interface). These allow individual spectral analyses of hot, compact stars with state-of-the-art non-local thermodynamical equilibrium (NLTE) stellar-atmosphere models that presently consider opacities of the elements H, He, C, N, O, Ne, Na, and Mg, without requiring detailed knowledge about the involved background codes and procedures. Presently, TheoSSA provides easy access to about 150000 pre-calculated stellar SEDs and is intended to ingest SEDs calculated by any model-atmosphere code. In the case of the exciting star of PRTM 1, we demonstrate the easy way to calculate individual NLTE stellar model-atmospheres to reproduce an observed optical spectrum. We measured Teff = 98000 +/- 5000 K, log (g / cm/s**2) = 5.0 (+0.3/-0.2) and photospheric mass fractions of H = 7.5 x 10**-1 (1.02 times solar), He = 2.4 x 10**-1 (0.96), C = 2.0 x 10**-3 (0.84), N = 3.2 x 10**-4 (0.46), O = 8.5 x 10**-3 (1.48) with uncertainties of +/- 0.2 dex. We determined the stellar mass and luminosity of 0.73 (+0.16/-0.15) Msun and log (L / Lsun) = 4.2 +/- 0.4, respectively.

This document describes the Server-side Operations for Data Access (SODA) web service capability. SODA is a low-level data access capability or server side data processing that can act upon the data files, performing various kinds of operations: filtering/subsection, transformations, pixel operations, and applying functions to the data.

To analyze spectra of hot stars, advanced non-local thermodynamic equilibrium (NLTE) model-atmosphere techniques are mandatory. Reliable atomic data is for the calculation of such model atmospheres. We aim to calculate new Sr IV - VII oscillator strengths to identify for the first time Sr spectral lines in hot white dwarf (WD) stars and to determine the photospheric Sr abundances. o measure the abundances of Se, Te, and I in hot WDs, we aim to compute new Se V, Te VI, and I VI oscillator strengths. To consider radiative and collisional bound-bound transitions of Se V, Sr IV - VII, Te VI, and I VI in our NLTE atmosphere models, we calculated oscillator strengths for these ions. We newly identified four Se V, 23 Sr V, 1 Te VI, and three I VI lines in the ultraviolet (UV) spectrum of RE0503-289. We measured a photospheric Sr abundance of 6.5 +3.8/-2.4 x 10**-4 (mass fraction, 9500 - 23800 times solar). We determined the abundances of Se (1.6 +0.9/-0.6 x 10**-3, 8000 - 20000), Te (2.5 +1.5/-0.9 x 10**-4, 11000 - 28000), and I (1.4 +0.8/-0.5 x 10**-5, 2700 - 6700). No Se, Sr, Te, and I line was found in the UV spectra of G191-B2B and we could determine only upper abundance limits of approximately 100 times solar. All identified Se V, Sr V, Te VI, and I VI lines in the UV spectrum of RE0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths.

Recently, the first installment of data from ESA's Gaia astrometric satellite mission (Gaia-DR1) was released, containing positions of more than 1 billion stars with unprecedented precision, as well as only proper motions and parallaxes, however only for a subset of 2 million objects. The second release, due in late 2017 or early 2018, will include those quantities for most objects. In order to provide a dataset that bridges the time gap between the Gaia-DR1 and Gaia-DR2 releases and partly remedies the lack of proper motions in the former, HSOY ("Hot Stuff for One Year") was created as a hybrid catalogue between Gaia-DR1 and ground-based astrometry, featuring proper motions (but no parallaxes) for a large fraction of the DR1 objects. While not attempting to compete with future Gaia releases in terms of data quality or number of objects, the aim of HSOY is to provide improved proper motions partly based on Gaia data, allowing some studies to be carried out just now or as pilot studies for later larger projects requiring higher-precision data. The HSOY catalogue was compiled using the positions taken from Gaia-DR1 combined with the input data from the PPMXL catalogue, employing the same weighted least-squares technique that was used to assemble the PPMXL catalogue itself. Results. This effort resulted in a four-parameter astrometric catalogue containing 583,000,000 objects, with Gaia-DR1 quality positions and proper motions with precisions from significantly less than 1 mas/yr to 5 mas/yr, depending on the object's brightness and location on the sky.

The Gaia Archive provides access to observations of around a billion sky sources. The primary access to this archive is via TAP services such as GACS and ARI-Gaia, which allow execution of SQL-like queries against a large remote database returning a result set of manageable size for client-side use. Such services are generally used for extracting relatively small source lists according to potentially complex selection criteria. But they can also be used to obtain statistical information about all, or a large fraction of, the observed sources by building histogram-like results. We examine here the practicalities of producing and consuming all-sky HEALPix weighted density maps in this way for Gaia and other large datasets. We present some modest requirements on TAP/RDBMS services to enable such queries, and discuss visualisation and serialization options for the results including some new capabilities in recent versions of TOPCAT.

For the spectral analysis of high-resolution and high-signal-to-noise spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. To search for Zr and Xe lines in the ultraviolet (UV) spectra of G191-B2B and RE0503-289, new Zr IV-VII, Xe IV-V, and Xe VIII oscillator strengths were calculated. This allows for the first time, determination of the Zr abundance in white dwarf (WD) stars and improvement of the Xe abundance determinations. We calculated Zr IV-VII, Xe IV-V, and Xe VIII oscillator strengths to consider radiative and collisional bound-bound transitions of Zr and Xe in our NLTE stellar-atmosphere models for the analysis of their lines exhibited in UV observations of the hot WDs G191-B2B and RE0503-289. We identified one new Zr IV, 14 new Zr V, and ten new Zr VI lines in the spectrum of RE0503-289. Zr was detected for the first time in a WD. We measured a Zr abundance of -3.5 +/- 0.2 (logarithmic mass fraction, approx. 11 500 times solar). We dentified five new Xe VI lines and determined a Xe abundance of -3.9 +/- 0.2 (approx. 7500 times solar). We determined a preliminary photospheric Al abundance of -4.3 +/- 0.2 (solar) in RE0503-289. In the spectra of G191-B2B, no Zr line was identified. The strongest Zr IV line (1598.948 A) in our model gave an upper limit of -5.6 +/- 0.3 which is about 100 times solar. No Xe line was identified in the UV spectrum of G191-B2B and we confirmed the previously determined upper limit of -6.8 +/- 0.3 (ten times solar). Precise measurements and calculations of atomic data are a prerequisite for advanced NLTE stellar-atmosphere modeling. Observed Zr IV - VI and Xe VI - VII line profiles in the UV spectrum of RE0503-289 were simultaneously well reproduced.

This paper describes the Third Public Data Release (DR3) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. Science-grade quality data for 667 galaxies are made public, including the 200 galaxies of the Second Public Data Release (DR2). Data were obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5m telescope at the Calar Alto Observatory. Three different spectral setups are available, i) a low-resolution V500 setup covering the wavelength range 3749-7500 AA (4240-7140 AA unvignetted) with a spectral resolution of 6.0 AA (FWHM), for 646 galaxies, ii) a medium-resolution V1200 setup covering the wavelength range 3650-4840 AA (3650-4620 AA unvignetted) with a spectral resolution of 2.3 AA (FWHM), for 484 galaxies, and iii) the combination of the cubes from both setups (called COMBO), with a spectral resolution of 6.0 AA and a wavelength range between 3700-7500 AA (3700-7140 AA unvignetted), for 446 galaxies. The Main Sample, selected and observed according to the CALIFA survey strategy covers a redshift range between 0.005 and 0.03, spans the color-magnitude diagram and probes a wide range of stellar mass, ionization conditions, and morphological types. The Extension Sample covers several types of galaxies that are rare in the overall galaxy population and therefore not numerous or absent in the CALIFA Main Sample. All the cubes in the data release were processed using the latest pipeline, which includes improved versions of the calibration frames and an even further improved im- age reconstruction quality. In total, the third data release contains 1576 datacubes, including ~1.5 million independent spectra. It is available at http://califa.caha.es/DR3.

An IVOA Identifier is a globally unique name for a resource within the Virtual Observatory. This name can be used to retrieve a unique description of the resource from an IVOA-compliant registry or to identify an entity like a dataset or a protocol without dereferencing the identifier. This document describes the syntax for IVOA Identifiers as well as how they are created. The syntax has been defined to encourage global-uniqueness naturally and to maximize the freedom of resource providers to control the character content of an identifier.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. New of Kr IV - VII oscillator strengths for a large number of lines allow to construct more detailed model atoms for our NLTE model-atmosphere calculations. This enables us to search for additional Kr lines in observed spectra and to improve Kr abundance determinations. We calculated Kr IV - VII oscillator strengths to consider radiative and collisional bound-bound transitions in detail in our NLTE stellar-atmosphere models for the analysis of Kr lines exhibited in high-resolution and high-S/N ultraviolet (UV) observations of the hot white dwarf RE 0503-289. We reanalyzed the effective temperature and surface gravity and determined Teff = 70 000 +/- 2000 K and log (g / cm/s**2) = 7.5 +/- 0.1. We newly identified ten Kr V lines and one Kr VI line in the spectrum of RE 0503-289. We measured a Kr abundance of -3.3 +/- 0.3 (logarithmic mass fraction). We discovered that the interstellar absorption toward RE 0503-289 has a multi-velocity structure within a radial-velocity interval of -40 km/s < vrad < +18 km/s. Reliable measurements and calculations of atomic data are a prerequisite for state-of-the-art NLTE stellar-atmosphere modeling. Observed Kr V - VII line profiles in the UV spectrum of the white dwarf RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths.

For the spectral analysis of high-resolution and high-signal-to-noise (S/N) spectra of hot stars, state-of-the-art non-local thermodynamic equilibrium (NLTE) model atmospheres are mandatory. These are strongly dependent on the reliability of the atomic data that is used for their calculation. To identify molybdenum lines in the ultraviolet (UV) spectra of the DA-type white dwarf G191-B2B and the DO-type white dwarf RE0503-289 and to determine their photospheric Mo abundances, newly calculated Mo IV - VII oscillator strengths are used. We identified twelve Mo V and nine Mo VI lines in the UV spectrum of RE0503-289 and measured a photospheric Mo abundance of 1.2 - 3.0 x 10**-4 (mass fraction, 22500 - 56400 times the solar abundance). In addition, from the As V and Sn IV resonance lines, we measured mass fractions of arsenic (0.5 - 1.3 x 10**-5, about 300 - 1200 times solar) and tin (1.3 - 3.2 x 10**-4, about 14300 35200 times solar). For G191-B2B, upper limits were determined for the abundances of Mo (5.3 x 10**-7, 100 times solar) and, in addition, for Kr (1.1 x 10**-6, 10 times solar) and Xe (1.7 x 10**-7, 10 times solar). The arsenic abundance was determined (2.3 - 5.9 x 10**-7, about 21 - 53 times solar). A new, registered German Astrophysical Virtual Observatory (GAVO) service, TOSS, has been constructed to provide weighted oscillator strengths and transition probabilities. Reliable measurements and calculations of atomic data are a prerequisite for stellar-atmosphere modeling. Observed Mo V - VI line profiles in the UV spectrum of the white dwarf RE0503-289 were well reproduced with our newly calculated oscillator strengths. For the first time, this allowed to determine the photospheric Mo abundance in a white dwarf.

Registries provide a mechanism with which VO applications can discover and select resources - first and foremost data and services - that are relevant for a particular scientific problem. This specification defines an interface for searching this resource metadata based on the IVOA's TAP protocol. It specifies a set of tables that comprise a useful subset of the information contained in the registry records, as well as the table's data content in terms of the XML VOResource data model. The general design of the system is geared towards allowing easy authoring of queries.

This document describes a recommended syntax for writing the string representation of unit labels ("VOUnits"). In addition, it describes a set of recognised and deprecated units, which is as far as possible consistent with other relevant standards (BIPM, ISO/IEC and the IAU). The intention is that units written to conform to this specification will likely also be parsable by other well-known parsers. To this end, we include machine-readable grammars for other units syntaxes.

This document describes the linking of data discovery metadata to access to the data itself, further detailed metadata, related resources, and to services that perform operations on the data. The web service capability supports a drill-down into the details of a specific dataset and provides a set of links to the dataset file(s) and related resources. This specification also includes a VOTable-specific method of providing descriptions of one or more services and their input(s), usually using parameter values from elsewhere in the VOTable document. Providers are able to describe services that are relevant to the records (usually datasets with identifiers) by including service descriptors in a result document.

The Virtual Observatory Registry is a distributed directory of information systems and other resources relevant to astronomy. To make it useful, facilities to query that directory must be provided to humans and machines alike. This article reviews the development and status of such facilities, also considering the lessons learnt from about a decade of experience with Registry interfaces. After a brief outline of the history of the standards development, it describes the use of Registry interfaces in some popular clients as well as dedicated UIs for interrogating the Registry. It continues with a thorough discussion of the design of the two most recent Registry interface standards, RegTAP on the one hand and a full-text-based interface on the other hand. The article finally lays out some of the less obvious conventions that emerged in the interaction between providers of registry records and Registry users as well as remaining challenges and current developments.

This paper describes the Second Public Data Release (DR2) of the Calar Alto Legacy Integral Field Area (CALIFA) survey. The data for 200 objects are made public, including the 100 galaxies of the First Public Data Release (DR1). Data were obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5 m telescope at the Calar Alto observatory. Two different spectral setups are available for each galaxy, (i) a low-resolution V500 setup covering the wavelength range 3745-7500 \AA\ with a spectral resolution of 6.0 \AA\ (FWHM), and (ii) a medium-resolution V1200 setup covering the wavelength range 3650-4840 \AA\ with a spectral resolution of 2.3 \AA\ (FWHM). The sample covers a redshift range between 0.005 and 0.03, with a wide range of properties in the Color-Magnitude diagram, stellar mass, ionization conditions, and morphological types. All released cubes were reduced with the latest pipeline, including improved spectrophotometric calibration, spatial registration and spatial resolution. The spectrophotometric calibration is better than 6% and the median spatial resolution is 2.5". Altogether the second data release contains over 1.5 million spectra. It is available at http://califa.caha.es/DR2.

The Data Center Helper Suite DaCHS is an integrated publication package for building Virtual Observatory (VO) and Web services, supporting the entire workflow from ingestion to data mapping to service definition. It implements all major data discovery, data access, and registry protocols defined by the VO. DaCHS in this sense works as glue between data produced by the data providers and the standard protocols and formats defined by the VO. This paper discusses central elements of the design of the package and gives two case studies of how VO protocols are implemented using DaCHS' concepts.

In the Virtual Observatory (VO), the Registry provides the mechanism with which users and applications discover and select resources -- typically, data and services -- that are relevant for a particular scientific problem. Even though the VO adopted technologies in particular from the bibliographic community where available, building the Registry system involved a major standardisation effort, involving about a dozen interdependent standard texts. This paper discusses the server-side aspects of the standards and their application, as regards the functional components (registries), the resource records in both format and content, the exchange of resource records between registries (harvesting), as well as the creation and management of the identifiers used in the system based on the notion of authorities. Registry record authors, registry operators or even advanced users thus receive a big picture serving as a guideline through the body of relevant standard texts. To complete this picture, we also mention common usage patterns and open issues as appropriate.

This document describes an XML encoding standard for metadata about services implementing the table access protocol TAP [TAP], referred to as TAPRegExt. Instance documents are part of the service's registry record or can be obtained from the service itself. They deliver information to both humans and software on the languages, output formats, and upload methods supported by the service, as well as data models implemented by the exposed tables, optional language features, and certain limits enforced by the service.

This document describes the Data Access Layer Interface (DALI). DALI defines the base web service interface common to all Data Access Layer (DAL) services. This standard defines the behaviour of common resources, the meaning and use of common parameters, success and error responses, and DAL service registration. The goal of this specification is to define the common elements that are shared across DAL services in order to foster consistency across concrete DAL service specifications and to enable standard re-usable client and service implementations and libraries to be written and widely adopted.

We present the first public data release of the CALIFA survey. It consists of science-grade optical datacubes for the first 100 of eventually 600 nearby (0.005<z<0.03) galaxies, obtained with the integral-field spectrograph PMAS/PPak mounted on the 3.5m telescope at the Calar Alto observatory. The galaxies in DR1 already cover a wide range of properties in color-magnitude space, morphological type, stellar mass, and gas ionization conditions. This offers the potential to tackle a variety of open questions in galaxy evolution using spatially resolved spectroscopy. Two different spectral setups are available for each galaxy, (i) a low-resolution V500 setup covering the nominal wavelength range 3745-7500A with a spectral resolution of 6.0A (FWHM), and (ii) a medium-resolution V1200 setup covering the nominal wavelength range 3650-4840A with a spectral resolution of 2.3A (FWHM). We present the characteristics and data structure of the CALIFA datasets that should be taken into account for scientific exploitation of the data, in particular the effects of vignetting, bad pixels and spatially correlated noise. The data quality test for all 100 galaxies showed that we reach a median limiting continuum sensitivity of 1.0x10^-18erg/s/cm^2/A/arcsec^2 at 5635A and 2.2x10^-18erg/s/cm^2/A/arcsec^2 at 4500A for the V500 and V1200 setup respectively, which corresponds to limiting r and g band surface brightnesses of 23.6mag/arcsec^2 and 23.4mag/arcsec^2, or an unresolved emission-line flux detection limit of roughly 1x10^-17erg/s/cm^2/arcsec^2 and 0.6x10^-17erg/s/cm^2/arcsec^2, respectively. The median spatial resolution is 3.7", and the absolute spectrophotometric calibration is better than 15% (1sigma). We also describe the available interfaces and tools that allow easy access to this first public CALIFA data.

We identify stars with large proper motions that are potential candidates for the astrometric microlensing effect during the Gaia mission i.e. between 2012 and 2019. The effect allows a precise measurement of the mass of a single star that is acting as a lens. We construct a candidate list by combining information from several input catalogs including PPMXL, LSPM, PPMX, OGLEBG, and UCAC3. The selection of the microlensing candidates includes the verification of their proper motions as well as the calculation of the centroid shift of the source resulting from the astrometric microlensing effect. The assembled microlensing catalog comprises 1118 candidates for the years 2012 to 2019. Our analysis demonstrates that 96% of the (high) proper motions of these candidates are erroneous. We are thus left with 43 confirmed candidates for astrometric microlensing during the expected Gaia mission. For most of them the light centroid shift is below ~100 microarcsec (assuming a dark lens) or the astrometric deviation is considerably reduced by the brightness of the lens. Due to this the astrometric microlensing effect can potentially be measured for 9 candidates that have a centroid shift between 100 and 4000 microarcsec. For 2 of these astrometric microlensing candidates we predict a strong centroid shift of about 1000 and 4000 microarcsec, respectively, that should be observable over a period of a few months up to a few years with the Gaia mission.

USNO-B1.0 and 2MASS are the most widely used full-sky surveys. However, 2MASS has no proper motions at all, and USNO-B1.0 published only relative, not absolute (i.e. on ICRS) proper motions. We performed a new determination of mean positions and proper motions on the ICRS system by combining USNO-B1.0 and 2MASS astrometry. This catalog is called PPMXL {VO-access to the catalog is possible via http://vo.uni-hd.de/ppmxl}, and it aims to be complete from the brightest stars down to about $V \approx 20$ full-sky. PPMXL contains about 900 million objects, some 410 million with 2MASS photometry, and is the largest collection of ICRS proper motions at present. As representative for the ICRS we chose PPMX. The recently released UCAC3 could not be used because we found plate-dependent distortions in its proper motion system north of -20$^\circ$ declination. UCAC3 served as an intermediate system for $\delta \leq -20^\circ$. The resulting typical individual mean errors of the proper motions range from 4 mas/y to more than 10 mas/y depending on observational history. The mean errors of positions at epoch 2000.0 are 80 to 120 mas, if 2MASS astrometry could be used, 150 to 300 mas else. We also give correction tables to convert USNO-B1.0 observations of e.g. minor planets to the ICRS system.

In a collaboration of the German Astrophysical Virtual Observatory (GAVO) and AstroGrid-D, the German Astronomy Community Grid (GACG), we provide a VO service for the access and the calculation of stellar synthetic energy distributions (SEDs) based on static as well as expanding non-LTE model atmospheres. At three levels, a VO user may directly compare observed and theoretical SEDs: The easiest and fastest way is to use pre-calculated SEDs from the GAVO database. For individual objects, grids of model atmospheres and SEDs can be calculated on the compute resources of AstroGrid-D within reasonable wallclock time. Experienced VO users may even create own atomic-data files for a more detailed analysis. This VO service opens also the perspective for a new approach to an automated spectral analysis of a large number of observations, e.g. provided by multi-object spectrographs.

With over 20 million records, the ADS citation database is regularly used by researchers and librarians to measure the scientific impact of individuals, groups, and institutions. In addition to the traditional sources of citations, the ADS has recently added references extracted from the arXiv e-prints on a nightly basis. We review the procedures used to harvest and identify the reference data used in the creation of citations, the policies and procedures that we follow to avoid double-counting and to eliminate contributions which may not be scholarly in nature. Finally, we describe how users and institutions can easily obtain quantitative citation data from the ADS, both interactively and via web-based programming tools. The ADS is available at http://ads.harvard.edu.

We examine the modes admitted by the Mestel disk, a disk with a globally flat rotation curve. In contrast to previous analyses of this problem by Zang (\cite{1976PhDT........26Z}) and Evans & Read (\cite{1998MNRAS.300...83E}, \cite{1998MNRAS.300..106E}), we approximate the orbits to obtain almost closed expressions for the kernel of the integral equation governing the behaviour of the modes. Otherwise we, like them, follow Kalnajs' programme to simultaneously solve the Boltzmann and Poisson equations. We investigate the modes admitted by both the self-consistent and a cut-out Mestel disk, the difference being that in the latter, a part of the matter in the disk is immobilised. This breaks the self-similarity and produces a pronouncedly different picture, both technically and in terms of the disk properties. The self-consistent disk is governed by a Cauchy integral equation, the cut-out disk by an integral equation that can be treated as a Fredholm equation of the second kind. In general, our approximation reproduces the results of the previous works remarkably well, yielding quantities mostly within 5% of the values reported by Zang and Evans & Read and thus also the basic result that in a ``standard'' cut-out disk, only one-armed modes are unstable at the limit of axisymmetric stability. In the self-consistent disk, relatively compact expressions for the kernel allow an intuitive understanding of most of the properties of neutral (non-rotating, non-growing) modes there. We finally show that self-consistent Mestel disks do not admit growing or rotating modes in this sort of stellar-dynamical analysis.

We examine the development of a transient spiral arm in a disk galaxy made up of both gas and stars. To this end we have performed numerical simulations in a shearing sheet (basically a rectangular patch of a disc) that contains gas in the form of clouds behaving like Brahic's (1977) sticky particles, and stars that appear as a background continuum providing the perturbation forces. These are computed from the theory of swing amplification, using Fuchs' (1991) work. We describe the evolution of our model under a single and under recurring swing amplification events, discerning three phases. Furthermore, we give an interpretation of this evolution in terms of a variation of the epicyclic frequency with the distance to the wave crest. We also assess the importance of self gravity in the gas for our results.