In the summer of 2011, the first on-sky astrometric commissioning of PRIMA-Astrometry delivered a performance of 3 m'' for a 10 '' separation on bright objects, orders of magnitude away from its exoplanet requirement of 50 {\mu}'' ~ 20 {\mu}'' on objects as faint as 11 mag ~ 13 mag in K band. This contribution focuses on upgrades and characterizations carried out since then. The astrometric metrology was extended from the Coud\'e focus of the Auxillary Telescopes to their secondary mirror, in order to reduce the baseline instabilities and improve the astrometric performance. While carrying out this extension, it was realized that the polarization retardance of the star separator derotator had a major impact on both the astrometric metrology and the fringe sensors. A local compensation of this retardance and the operation on a symmetric baseline allowed a new astrometric commissioning. In October 2013, an improved astrometric performance of 160 {\mu}'' was demonstrated, still short of the requirements. Instabilities in the astrometric baseline still appear to be the dominating factor. In preparation to a review held in January 2014, a plan was developed to further improve the astrometric and faint target performance of PRIMA Astrometry. On the astrometric aspect, it involved the extension of the internal longitudinal metrology to primary space, the design and implementation of an external baseline metrology, and the development of an astrometric internal fringes mode. On the faint target aspect, investigations of the performance of the fringe sensor units and the development of an AO system (NAOMI) were in the plan. Following this review, ESO decided to take a proposal to the April 2014 STC that PRIMA be cancelled, and that ESO resources be concentrated on ensuring that Gravity and Matisse are a success. This proposal was recommended by the STC in May 2014, and endorsed by ESO.

The ESPRI project relies on the astrometric capabilities offered by the PRIMA facility of the Very Large Telescope Interferometer for the discovery and study of planetary systems. Our survey consists of obtaining high-precision astrometry for a large sample of stars over several years and to detect their barycentric motions due to orbiting planets. We present the operation principle, the instrument's implementation, and the results of a first series of test observations. A comprehensive overview of the instrument infrastructure is given and the observation strategy for dual-field relative astrometry is presented. The differential delay lines, a key component of the PRIMA facility which was delivered by the ESPRI consortium, are described and their performance within the facility is discussed. Observations of bright visual binaries are used to test the observation procedures and to establish the instrument's astrometric precision and accuracy. The data reduction strategy for astrometry and the necessary corrections to the raw data are presented. Adaptive optics observations with NACO are used as an independent verification of PRIMA astrometric observations. The PRIMA facility was used to carry out tests of astrometric observations. The astrometric performance in terms of precision is limited by the atmospheric turbulence at a level close to the theoretical expectations and a precision of 30 micro-arcseconds was achieved. In contrast, the astrometric accuracy is insufficient for the goals of the ESPRI project and is currently limited by systematic errors that originate in the part of the interferometer beamtrain which is not monitored by the internal metrology system. Our observations led to the definition of corrective actions required to make the facility ready for carrying out the ESPRI search for extrasolar planets.

The Extrasolar Planet Search with PRIMA project (ESPRI) aims at characterising and detecting extrasolar planets by measuring the host star's reflex motion using the narrow-angle astrometry capability of the PRIMA facility at the Very Large Telescope Interferometer. A first functional demonstration of the astrometric mode was achieved in early 2011. This marked the start of the astrometric commissioning phase with the purpose of characterising the instrument's performance, which ultimately has to be sufficient for exoplanet detection. We show results obtained from the observation of bright visual binary stars, which serve as test objects to determine the instrument's astrometric precision, its accuracy, and the plate scale. Finally, we report on the current status of the ESPRI project, in view of starting its scientific programme.

The fringe sensor unit (FSU) is the central element of the phase referenced imaging and micro-arcsecond astrometry (PRIMA) dual-feed facility for the Very Large Telescope interferometer (VLTI). It has been installed at the Paranal observatory in August 2008 and is undergoing commissioning and preparation for science operation. Commissioning observations began shortly after installation and first results include the demonstration of spatially encoded fringe sensing and the increase in VLTI limiting magnitude for fringe tracking. However, difficulties have been encountered because the FSU does not incorporate real-time photometric correction and its fringe encoding depends on polarisation. These factors affect the control signals, especially their linearity, and can disturb the tracking control loop. To account for this, additional calibration and characterisation efforts are required. We outline the instrument concept and give an overview of the commissioning results obtained so far. We describe the effects of photometric variations and beam-train polarisation on the instrument operation and propose possible solutions. Finally, we update on the current status in view of the start of astrometric science operation with PRIMA.

The Fringe Sensor Unit (FSU) is the central element of the Phase Referenced Imaging and Micro-arcsecond Astrometry (PRIMA) dual-feed facility and provides fringe sensing for all observation modes, comprising off-axis fringe tracking, phase referenced imaging, and high-accuracy narrow-angle astrometry. It is installed at the Very Large Telescope Interferometer (VLTI) and successfully servoed the fringe tracking loop during the initial commissioning phase. Unique among interferometric beam combiners, the FSU uses spatial phase modulation in bulk optics to retrieve real-time estimates of fringe phase after spatial filtering. A R=20 spectrometer across the K-band makes the retrieval of the group delay signal possible. The FSU was integrated and aligned at the VLTI in summer 2008. It yields phase and group delay measurements at sampling rates up to 2 kHz, which are used to drive the fringe tracking control loop. During the first commissioning runs, the FSU was used to track the fringes of stars with K-band magnitudes as faint as m_K=9.0, using two VLTI Auxiliary Telescopes (AT) and baselines of up to 96 m. Fringe tracking using two Very Large Telescope (VLT) Unit Telescopes (UT) was demonstrated. During initial commissioning and combining stellar light with two ATs, the FSU showed its ability to improve the VLTI sensitivity in K-band by more than one magnitude towards fainter objects, which is of fundamental importance to achieve the scientific objectives of PRIMA.

The astrometry technique is an important tool for detecting and characterizing exoplanets of different type. In this review, the different projects which are either operating, in construction or in discussion are presented and their performance discussed in the framework of the Blue Dots study. We investigate the sensitivity of astrometry to different sources of noise and we show that astrometry is a key technique in the path of discovering and characterizing new types of planets including the very challenging category of Earth-like planets orbiting the habitable zone of solar-type stars.

The Phase-Referenced Imaging and Micro-arcsecond Astrometry (PRIMA) facility is scheduled for installation in the Very Large Telescope Interferometer observatory in Paranal, Chile, in the second half of 2008. Its goal is to provide astrometric accuracy in the micro-arcsecond range. High precision astrometry can be applied to explore the dynamics of the dense stellar cluster. Especially models for the formation of stars near super massive black holes or the fast transfer of short-lived massive stars into the innermost parsec of our galaxy can be tested. By measuring the orbits of stars close to the massive black hole one can probe deviations from a Keplerian motion. Such deviations could be due to a swarm of dark, stellar mass objects that perturb the point mass solution. At the same time the orbits are affected by relativistic corrections which thus can be tested. The ultimate goal is to test the effects of general relativity in the strong gravitational field. The latter can be probed with the near infrared flares of SgrA* which are most likely due to accretion phenomena onto the black hole. We study the expected performance of PRIMA for astrometric measurements in the Galactic Center based on laboratory measurements and discuss possible observing strategies.

Until now, the detailed interpretation of the observed microlensing events has suffered from the fact that the physical parameters of the phenomenon cannot be uniquely determined from the available astronomical measurements, i.e. the photometric lightcurves. The situation will change in the near-future with the availability of long-baseline, sensitive optical interferometers, which should be able to resolve the images of the lensed objects into their components. For this, it will be necessary to achieve a milliarcsecond resolution on sources with typical magnitudes K $\ga 12$. Indeed, brighter events have never been observed up to now by micro-lensing surveys. We discuss the possibilities opened by the use of long baseline interferometry in general, and in particular for one such facility, the ESO VLT Interferometer, which will attain the required performance. We discuss the expected accuracy and limiting magnitude of such measurements. On the basis of the database of the events detected by the OGLE experiment, we estimate the number of microlenses that could be available for measurements by the VLTI. We find that at least several tens of events could be observed each year. In conjunction with the photometric data, our ability to measure the angular separation between the microlensed images will enable a direct and unambiguous determination of both their masses and locations.

This paper describes the qualitative effects of LGS spot elongation and Rayleigh scattering on ALFA wavefront sensor images. An analytical model of Rayleigh scattering and a numerical model of laser plume generation at the altitude of the Na-layer were developed. These models, integrated into a general AO simulation, provide the sensor sub-aperture images. It is shown that the centroid measurement accuracy is affected by these phenomena. The simulation was made both for the ALFA system and for the VLT Nasmyth Adaptive Optics System (NAOS).