The present debate on the reliability of astrophysical opacities has reached a new climax with the recent measurements of Fe opacities on the Z-machine at the Sandia National Laboratory \citep{Bailey2015}. To understand the differences between theoretical results, on the one hand, and experiments on the other, as well as the differences among the various theoretical results, detailed comparisons are needed. Many ingredients are involved in the calculation of opacities; deconstructing the whole process and comparing the differences at each step are necessary to quantify their importance and impact on the final results. We present here such a comparison using the two main approaches to calculate the required atomic data, the $R$-Matrix and distorted-wave methods, as well as sets of configurations and coupling schemes to quantify the effects on the opacities for the $Fe\ XVII$ and $Ni\ XIV$ ions.

In the framework of the present phase -- IPOPv2 -- of the international Opacity Project (OP), a new web service has been implemented based on the latest release of the OP opacities. The user may construct online opacity tables to be conveniently included in stellar evolution codes in the format most commonly adopted by stellar physicists, namely the OPAL format. This facility encourages the use and comparison of both the OPAL and OP data sets in applications. The present service allows for the calculation of multi-element mixtures containing the 17 species (H, He, C, N, O, Ne, Na, Mg, Al, Si, S, Ar, Ca, Cr, Mn, Fe and Ni) considered by the OP, and underpins the latest release of OP opacities. This new service provides tables of Rosseland mean opacites using OP atomic data. We provide an alternative to the OPAL opacity services allowing direct comparison as well as study of the effect of uncertainties in stellar modeling due to mean opacities.

Several years ago, M. Asplund and coauthors (2004) proposed a revision of the Solar composition. The use of this new prescription for Solar abundances in standard stellar models generated a strong disagreement between the predictions and the observations of Solar observables. Many claimed that the Standard Solar Model (SSM) was faulty, and more specifically the opacities used in such models. As a result, activities around the stellar opacities were boosted. New experiments (J. Bailey at Sandia on Z-Pinch, The OPAC consortium at LULI200) to measure directly absorbtion coefficients have been realized or are underway. Several theoretical groups (CEA-OPAS, Los Alamos Nat. Lab., CEA-SCORCG, The Opacity Project - The Iron Project (IPOPv2)) have started new sets of calculations using different approaches and codes. While the new results seem to confirm the good quality of the opacities used in SSM, it remains important to improve and complement the data currently available. We present recent results in the case of the photoionization cross sections for Ni XIV (Ni13+ ) from IPOPv2 and possible implications on stellar modelling.

We perform a quantitative analysis of the solar composition problem by using a statistical approach that allows us to combine the information provided by helioseimic and solar neutrino data in an effective way. We include in our analysis the helioseismic determinations of the surface helium abundance and of the depth of the convective envelope, the measurements of the $^7{\rm Be}$ and $^8{\rm B}$ neutrino fluxes, the sound speed profile inferred from helioseismic frequencies. We provide all the ingredients to describe how these quantities depend on the solar surface composition and to evaluate the (correlated) uncertainties in solar model predictions. We include errors sources that are not traditionally considered such as those from inversion of helioseismic data. We, then, apply the proposed approach to infer the chemical composition of the Sun. We show that the opacity profile of the Sun is well constrained by the solar observational properties. In the context of a two parameter analysis in which elements are grouped as volatiles (i.e. C, N, O and Ne) and refractories (i.e Mg, Si, S, Fe), the optimal composition is found by increasing the the abundance of volatiles by $\left( 45\pm 4\right)\%$ and that of refractories by $\left( 19\pm 3\right)\%$ with respect to the values provided by AGSS09. This corresponds to the abundances $\varepsilon_{\rm O}=8.85\pm 0.01$ and $\varepsilon_{\rm Fe}=7.52\pm0.01$. As an additional result of our analysis, we show that the observational data prefer values for the input parameters of the standard solar models (radiative opacities, gravitational settling rate, the astrophysical factors $S_{34}$ and $S_{17}$) that differ at the $\sim 1\sigma$ level from those presently adopted.

Star formation begins with the gravitational collapse of a dense core inside a molecular cloud. As the collapse progresses, the centre of the core begins to heat up as it becomes optically thick. The temperature and density in the centre eventually reach high enough values where fusion reactions can ignite; the protostar is born. This sequence of events entail many physical processes, of which radiative transfer is of paramount importance. Many simulations of protostellar collapse make use of a grey treatment of radiative transfer coupled to the hydrodynamics. However, interstellar gas and dust opacities present large variations as a function of frequency. In this paper, we follow-up on a previous paper on the collapse and formation of Larson's first core using multigroup radiation hydrodynamics (Paper I) by extending the calculations to the second phase of the collapse and the formation of Larson's second core. We have made the use of a non-ideal gas equation of state as well as an extensive set of spectral opacities in a spherically symmetric fully implicit Godunov code to model all the phases of the collapse of a 0.1, 1 and 10 solar mass cloud cores. We find that, for a same central density, there are only small differences between the grey and multigroup simulations. The first core accretion shock remains supercritical while the shock at the second core border is found to be strongly subcritical with all the accreted energy being transfered to the core. The size of the first core was found to vary somewhat in the different simulations (more unstable clouds form smaller first cores) while the size, mass and temperature of the second cores are independent of initial cloud mass, size and temperature. Our simulations support the idea of a standard (universal) initial second core size of 0.003 AU and mass 0.0014 solar masses.

Opacity is an important ingredient of the evolution of stars. The calculation of opacity coefficients is complicated by the fact that the plasma contains partially ionized heavy ions that contribute to opacity dominated by H and He. Up to now, the astrophysical community has greatly benefited from the work of the contributions of Los Alamos [1], Livermore [2] and the Opacity Project (OP) [3]. However unexplained differences of up to 50% in the radiative forces and Rosseland mean values for Fe have been noticed for conditions corresponding to stellar envelopes. Such uncertainty has a real impact on the understanding of pulsating stellar envelopes, on the excitation of modes, and on the identification of the mode frequencies. Temperature and density conditions equivalent to those found in stars can now be produced in laboratory experiments for various atomic species. Recently the photo-absorption spectra of nickel and iron plasmas have been measured during the LULI 2010 campaign, for temperatures between 15 and 40 eV and densities of ~3 mg/cm3. A large theoretical collaboration, the "OPAC", has been formed to prepare these experiments. We present here the set of opacity calculations performed by eight different groups for conditions relevant to the LULI 2010 experiment and to astrophysical stellar envelope conditions.

The knowledge of stellar evolution is evolving quickly thanks to an increased number of opportunities to scrutinize the stellar internal plasma properties by stellar seismology and by 1D and 3D simulations. These new tools help us to introduce the internal dynamical phenomena in stellar modeling. A proper inclusion of these processes supposes a real confidence in the microscopic physics used, partly checked by solar or stellar acoustic modes. In the present paper we first recall which fundamental physics has been recently verified by helioseismology. Then we recall that opacity is an important ingredient of the secular evolution of stars and we point out why it is necessary to measure absorption coefficients and degrees of ionization in the laboratory for some well identified astrophysical conditions. We examine two specific experimental conditions which are accessible to large laser facilities and are suitable to solve some interesting questions of the stellar community: are the solar internal radiative interactions properly estimated and what is the proper role of the opacity in the excitation of the non radial modes in the envelop of the $\beta$ Cephei and the Be stars ? At the end of the paper we point out the difficulties of the experimental approach that we need to overcome.

Seismology of stars is strongly developing. To address this question we have formed an international collaboration OPAC to perform specific experimental measurements, compare opacity calculations and improve the opacity calculations in the stellar codes [1]. We consider the following opacity codes: SCO, CASSANDRA, STA, OPAS, LEDCOP, OP, SCO-RCG. Their comparison has shown large differences for Fe and Ni in equivalent conditions of envelopes of type II supernova precursors, temperatures between 15 and 40 eV and densities of a few mg/cm3 [2, 3, 4]. LEDCOP, OPAS, SCO-RCG structure codes and STA give similar results and differ from OP ones for the lower temperatures and for spectral interval values [3]. In this work we discuss the role of Configuration Interaction (CI) and the influence of the number of used configurations. We present and include in the opacity code comparisons new HULLAC-v9 calculations [5, 6] that include full CI. To illustrate the importance of this effect we compare different CI approximations (modes) available in HULLAC-v9 [7]. These results are compared to previous predictions and to experimental data. Differences with OP results are discussed.

This workshop brought together scientists (including atomic physicists, theoretical astrophysicists and astronomers) concerned with the completeness and accuracy of atomic data for astrophysical applications. The topics covered in the workshop included the evaluation of uncertainties in atomic data, the propagation of such uncertainties in chemical abundances, and the feedback between observations and calculations. On a different level, we also discussed communication issues such as how to ensure that atomic data are correctly understood and used, and which forum is the best one for a fluid interaction between all communities involved in the production and use of atomic data. This paper reports on the discussions held during the workshop and introduces AstroAtom, a blog created as a platform for timely and open discussions on the needs and concerns over atomic data, and their effects on astronomical research. The complete proceedings will be published on http://astroatom.wordpress.com/.

We present in this paper a multigroup model for radiation hydrodynamics to account for variations of the gas opacity as a function of frequency. The entropy closure model (M1) is applied to multigroup radiation transfer in a radiation hydrodynamics code. In difference from the previous grey model, we are able to reproduce the crucial effects of frequency-variable gas opacities, a situation omnipresent in physics and astrophysics. We also account for the energy exchange between neighbouring groups which is important in flows with strong velocity divergence. These terms were computed using a finite volume method in the frequency domain. The radiative transfer aspect of the method was first tested separately for global consistency (reversion to grey model) and against a well established kinetic model through Marshak wave tests with frequency dependent opacities. Very good agreement between the multigroup M1 and kinetic models was observed in all tests. The successful coupling of the multigroup radiative transfer to the hydrodynamics was then confirmed through a second series of tests. Finally, the model was linked to a database of opacities for a Xe gas in order to simulate realistic multigroup radiative shocks in Xe. The differences with the previous grey models are discussed.

The lifetime of solar-like stars, the envelope structure of more massive stars, and stellar acoustic frequencies largely depend on the radiative properties of the stellar plasma. Up to now, these complex quantities have been estimated only theoretically. The development of the powerful tools of helio- and astero- seismology has made it possible to gain insights on the interiors of stars. Consequently, increased emphasis is now placed on knowledge of the monochromatic opacity coefficients. Here we review how these radiative properties play a role, and where they are most important. We then concentrate specifically on the envelopes of $\beta$ Cephei variable stars. We discuss the dispersion of eight different theoretical estimates of the monochromatic opacity spectrum and the challenges we need to face to check these calculations experimentally.

Opacity calculations are basic ingredients of stellar modelling. They play a crucial role in the interpretation of acoustic modes detected by SoHO, COROT and KEPLER. In this review we present our activities on both theoretical and experimental sides. We show new calculations of opacity spectra and comparisons between eight groups who produce opacity spectra calculations in the domain where experiments are scheduled. Real differences are noticed with real astrophysical consequences when one extends helioseismology to cluster studies of different compositions. Two cases are considered presently: (1) the solar radiative zone and (2) the beta Cephei envelops. We describe how our experiments are performed and new preliminary results on nickel obtained in the campaign 2010 at LULI 2000 at Polytechnique.

We examine the constraints imposed by helioseismic data on the solar heavy element abundances. In prior work we argued that the measured depth of the surface convection zone R_CZ and the surface helium abundance Y_surf were good metallicity indicators which placed separable constraints on light metals (CNONe) and the heavier species with good relative meteoritic abundances. The resulting interiors-based abundance scale was higher than some published studies based on 3D model atmospheres at a highly significant level. In this paper we explore the usage of the solar sound speed in the radiative interior as an additional diagnostic, and find that it is sensitive to changes in the Ne/O ratio even for models constructed to have the same R_CZ and Y_surf. Three distinct helioseismic tests (opacity in the radiative core, ionization in the convection zone, and the core mean molecular weight) yield consistent results. Our preferred O, Ne and Fe abundances are 8.86 +/-0.04, 8.15 +/-0.17 and 7.50 +/-0.05 respectively. They are consistent with the midrange of recently published 3D atmospheric abundances measurements. The values for O, Ne and Fe which combine interiors and atmospheric inferences are 8.83 +/-0.04, 8.08 +/-0.09 and 7.49 +/-0.04 respectively.

We determine photometric metal abundance estimates for individual main-sequence stars in the Virgo Overdensity (VOD), which covers almost 1000 deg^2 on the sky, based on a calibration of the metallicity sensitivity of stellar isochrones in the gri filter passbands using field stars with well-determined spectroscopic metal abundances. Despite the low precision of the method for individual stars, we derive [Fe/H] = -2.0 +/-0.1 (internal) +/-0.5 (systematic) for the metal abundance of the VOD from photometric measurements of 0.7 million stars in the Northern Galactic hemisphere with heliocentric distances from ~10 kpc to ~20 kpc. The metallicity of the VOD is indistinguishable, within Delta [Fe/H] < 0.2, from that of field halo stars covering the same distance range. This initial application suggests that the SDSS gri passbands can be used to probe the properties of main-sequence stars beyond ~10 kpc, complementing studies of nearby stars from more metallicity-sensitive color indices that involve the u passband.

We describe the methodology required for estimation of photometric estimates of metallicity based on the SDSS gri passbands, which can be used to probe the properties of main-sequence stars beyond ~ 10 kpc, complementing studies of nearby stars from more metallicity-sensitive color indices that involve the u passband. As a first application of this approach, we determine photometric metal abundance estimates for individual main-sequence stars in the Virgo Overdensity, which covers almost 1000 square degrees on the sky, based on a calibration of the metallicity sensitivity of stellar isochrones in the gri filter passbands using field stars with well-determined spectroscopic metal abundances. Despite the low precision of the method for individual stars, internal errors of in [Fe/H] ~ +/- 0.1 dex can be achieved for bulk stellar populations. The global metal abundance of the Virgo Overdensity determined in this way is <[Fe/H]> = -2.0 +/- 0.1 (internal) +/- 0.5 (systematic), from photometric measurements of 0.7 million stars with heliocentric distances from ~ 10 kpc to ~ 20 kpc. A preliminary metallicity map, based on results for 2.9 million stars in the northern SDSS DR-7 footprint, exhibits a shift to lower metallicities as one proceeds from the inner- to the outer-halo population, consistent with recent interpretation of the kinematics of local samples of stars with spectroscopically available metallicity estimates and full space motions.

We perform an extensive test of theoretical stellar models for main-sequence stars in ugriz, using cluster fiducial sequences obtained in the previous paper of this series. We generate a set of isochrones using the Yale Rotating Evolutionary Code (YREC) with updated input physics, and derive magnitudes and colors in ugriz from MARCS model atmospheres. These models match cluster main sequences over a wide range of metallicity within the errors of the adopted cluster parameters. However, we find a large discrepancy of model colors at the lower main sequence (Teff < ~4500 K) for clusters at and above solar metallicity. We also reach similar conclusions using the theoretical isochrones of Girardi et al. and Dotter et al., but our new models are generally in better agreement with the data. Using our theoretical isochrones, we also derive main-sequence fitting distances and turn-off ages for five key globular clusters, and demonstrate the ability to derive these quantities from photometric data in the Sloan Digital Sky Survey. In particular, we exploit multiple color indices (g - r, g - i, and g - z) in the parameter estimation, which allows us to evaluate internal systematic errors. Our distance estimates, with an error of sigma(m - M) = 0.03-0.11 mag for individual clusters, are consistent with Hipparcos-based subdwarf fitting distances derived in the Johnson-Cousins or Stromgren photometric systems.

Codes to compute mean opacities and radiative accelerations for arbitrary chemical mixtures using the Opacity Project recently revised data have been restructured in a client--server architecture and transcribed as a subroutine library. This implementation increases efficiency in stellar modelling where element stratification due to diffusion processes is depth dependent, and thus requires repeated fast opacity reestimates. Three user modes are provided to fit different computing environments, namely a web browser, a local workstation and a distributed grid.

Estimates of the bulk metal abundance of the Sun derived from the latest generation of model atmospheres are significantly lower than the earlier standard values. In Paper I we demonstrated that a low solar metallicity is inconsistent with helioseismology if the quoted errors in the atmospheres models (of order 0.05 dex) are correct. In this paper we undertake a critical analysis of the solar metallicity and its uncertainty from a model atmospheres perspective, focusing on CNO. We argue that the non-LTE corrections for abundances derived from atomic features are overestimated in the recent abundance studies, while systematic errors in the absolute abundances are underestimated. If we adopt the internal consistency between different indicators as a measure of goodness of fit, we obtain intermediate abundances [C/H] = 8.44 +/- 0.06, [N/H] = 7.96 +/- 0.10 and [O/H] = 8.75 +/- 0.08. The errors are too large to conclude that there is a solar abundance problem, and permit both the high and low scales. However, the center-to-limb continuum flux variations predicted in the simulations appear to be inconsistent with solar data, which would favor the traditional thermal structure and lead to high CNO abundances of (8.52, 7.96, 8.80) close to the seismic scale. We argue that further empirical tests of non-LTE corrections and the thermal structure are required for precise absolute abundances. The implications for beryllium depletion and possible sources of error in the numerical simulations are discussed.

Helium-like ions provide the most important X-ray spectral diagnostics in high temperature fusion and astrophysical plasmas. We previously presented computed collision strengths for O~VII including relativistic fine structure, levels up to the $n=4$ complex and radiation damping of autoionizing resonances. We have extended this work to other He-like ions (N, Ne, Mg, Al, Si, S, Ca). The calculations are carried out using the Breit-Pauli R-matrix (BPRM) method with a 31-level eigenfunction expansion. Collision strengths for the principal lines important in X-ray plasma diagnostics, w, x, y and z, corresponding to the 4 transitions to the ground level 1s^2(^1S_0) <- 1s2p(^1P^o_1), 1s2p(^3P^o_2), 1s2p(^3P^o_1), 1s2s(^3S_1), are explicitly shown. We find the effect of radiation damping to be significant for the forbidden transitions in heavier He-like ions, which should affect the diagnostic line ratios. We extrapolated the collision strengths to their values at infinite energy using the Burgess-Tully extrapolation technique. This is required to calculate the Maxwellian average collision strengths at high temperature. We show that the coupling between dipole allowed and inter-combination transitions affects increasingly the effective collision strengths for the n ^1S_0 - n' ^3P_1 transition as the charge of the ion increases. This clearly affects the treatment of the extrapolation toward the infinite energy point of the collision strength. This work is carried out as part of the Iron Project-RmaX Network.

The latest solar atmosphere models include non-LTE corrections and 3D hydrodynamic convection simulations. These models predict a significant reduction in the solar metal abundance, which leads to a serious conflict between helioseismic data and the predictions of solar interiors models. We demonstrate that the helioseismic constraints on the surface convection zone depth and helium abundance combined with stellar interiors models can be used to define the goodness of fit for a given chemical composition. After a detailed examination of the errors in the theoretical models we conclude that models constructed with the older solar abundances are consistent (<2 \sigma) with the seismic data. Models constructed with the proposed new low abundance scale are strongly disfavored, disagreeing at the 15 \sigma level. We then use the sensitivity of the seismic properties to abundance changes to invert the problem and infer a seismic solar heavy element abundance mix with two components: meteoritic abundances, and the light metals CNONe. Seismic degeneracies between the best solutions for the elements arise for changes in the relative CNONe abundances and their effects are quantified. We obtain Fe/H=7.50+/-0.045+/-0.003(CNNe) and O/H=8.86+/-0.041+/-0.025(CNNe) for the relative CNNe in the GS98 mixture. The inferred solar oxygen abundance disagree with the abundance inferred from the 3D hydro models. Changes in the Ne abundance can mimic changes in O for the purposes of scalar constraints.Models constructed with low oxygen and high neon are inconsistent with the solar sound speed profile. The implications for the solar abundance scale are discussed.

Using the code AUTOSTRUCTURE, extensive calculations of inner-shell atomic data have been made for the chemical elements He, C, N, O, Ne, Na, Mg, Al, Si, S, Ar, Ca, Cr, Mn, Fe and Ni. The results are used to obtain up-dated opacities from the Opacity Project, OP. A number of other improvements on earlier work have also been included. Rosseland-mean opacities from OP are compared with those from OPAL. Differences of 5 to 10% occur. OP gives the `Z-bump', at log(T)=5.2, to be shifted to slightly higher temperatures. The opacities from OP, as functions of temperature and density, are smoother than those from OPAL. Extensive tests show that the numerical accuracy of the OP opacities following integration over frequency mesh and interpolation on temperature-density mesh is better than 1%. Prior to a number of recent investigations which have indicated a need for a downward revision in the solar abundances of oxygen and other elements, there was good agreement between properties of the sun deduced from helioseismology and from stellar evolution models calculated using OPAL opacities. The revisions in abundances destroy that agreement. In a recent paper Bahcall et al argue that the agreement would be restored if opacities for the regions of the sun between 0.7 and 0.4 solar radii were larger than those given by OPAL by about 10%. In the region concerned, the present results from OP do not differ from those of OPAL by more than 2.5%.

Here, we compare radiative accelerations (g_rad) derived from the new Opacity Project (OP) data with those computed from OPAL and some previous data from OP. For the case where we have full data from OPAL, the differences in the Rosseland mean opacities between OPAL and the new OP data are within 12% and less than 30% between new OP and previous OP data (OP1 at CDS). The radiative accelerations g_rad differ at up to the 17% level when compared to OPAL and up to the 38% level when compared to OP1. The comparison with OP1 on a larger (rho-T) space gives a difference of up to 40% for g_rad(C). And it increases for heavier elements. The differences increase for heavier elements reaching 60% for Si and 65% for S and Fe. We also constructed four representative stellar models in order to compare the new OP accelerations with prior published results that used OPAL data. The Rosseland means overall agree better than 10% for all of our cases. For the accelerations, the comparisons with published values yield larger differences in general. The published OPAL accelerations for carbon are even larger relative to OP compare to what our direct comparisons would indicate. Potential reasons for this puzzling behavior are discussed. In light of the significant differences in the inferred acceleration rates, theoretical errors should be taken into account when comparing models with observations. The implications for stellar evolution are briefly discussed. The sensitivity of g_rad to the atomic physics may provide a useful test of different opacity sources.

We investigate the effect of resonances in photoionization and recombination cross sections computed using the R-matrix method. Photoionization and recombination rates derived from high-resolution cross sections for oxygen ions are compared with earlier works with less resolution and accuracy, such as in the widely used Opacity Project data. We find significant differences in photoionization rates for O II metastable states, averaged over Planck functions corresponding to ionizing radiation fields, with respect to the intrinsic accuracy of the calculations and improved resolution. Furthermore, for highly charged ions other physical effects are also important. Recombination rate coefficients, averaged over a Maxwellian distribution, are extremely sensitive to the position and resolution of near-threshold resonances, and radiation damping, in (e + O VII) --> O VI + hnu. Surprisingly however, the effect on the monochromatic and the mean Rosseland and Planck bound-free opacities is relatively small, but may be potentially significant.

The K-alpha resonance complexes in oxygen ions O I - O VI are theoretically computed and resonance oscillator strengths and wavelengths are presented. The highly resolved photoionization cross sections, with relativistic fine structure, are computed in the coupled channel approximation using the Breit-Pauli R-matrix method. A number of strong K-alpha resonances are found to be appreciable, with resonance oscillator strengths f_r > 0.1. The K-alpha resonance wavelengths of O I-O VI lie in a relatively narrow wavelength range 22 - 23.5 A, and the X-ray opacity in this region should therefore be significantly affected by K --> L transitions in oxygen. The results should be useful in the interpretation of soft X-ray spectra observed from Chandra and XMM-Newton.

Theoretical differential oscillator strengths related to monochromatic opacity due to K- and L-shell absorption from oxygen and iron ions are directly compared with the Chandra and Xmm-Newton spectra of Seyfert~1 galaxy MCG--6-30-15. We compute the highly resolved continuum with resonances due to O I - VI and Fe XVI. It is found that the KLn (n --> infty) resonance series limits in O VI, and the lowest LMM resonance in Fe XVI, lie at the prominent 17.5 A break in the observed spectra. We also calculate and identify, for the first time, the observed gap in spectral flux at 22-23 A in the Chandra spectra due to K --> L resonant absorption features from all O-ions O I - VI, potentially leading to abundance determination of several or all ionization stages; similar signature gaps may be predicted due to other elements. The precise atomic parameters are computed in the relativistic close coupling approximation using the Breit-Pauli R-matrix method. The new X-ray opacities might possibly distinguish between models of a dusty warm absorber, and/or gravitational redshift and broadening due to a massive black hole in MCG--6-30-15.

The primary X-ray diagnostic lines in He-like ions are mainly excited by electron impact from the ground level to the n = 2 levels, but at high temperatures n > 2 levels are also excited. In order to describe the atomic processes more completely collision strengths are computed for OVII including for the first time all of the following: (i) relativistic fine structure, (ii) levels up to the n = 4, and (iii) radiation damping of autoionizing resonances. The calculations are carried out using the Breit-Pauli R-matrix (BPRM) method with a 31-level eigenfunction expansion. Resonance structures in collision strengths are delineated in detail up to the n = 4 thresholds. For highly charged He-like ions radiation damping of autoionizing resonances is known to be significant. We investigate this effect in detail and find that while resonances are discernibly damped radiatively as the series limit n --> infty is approached from below, the overall effect on effective cross sections and rate coefficients is found to be very small. Collision strengths for the principal lines important in X-ray plasma diagnostics, w,x,y and z, corresponding to the 4 transitions to the ground level 1s^2 (^1S_0) <-- 1s2p (^1P^o_1), 1s2p (^3P^o_2), 1s2p (^3P^o_1), 1s2s (^3S_1), are explicitly shown. It is found that the effective collision strength of the forbidden z-line is up to a factor of 4 higher at T < 10^6 K than previous values. This is likely to be of considerable importance in the diagnostics of photoionized astrophysical plasmas. Significant differences are also found with previous works for several other transitions. This work is carried out as part of the Iron Project-RmaX Network.

An extensive set of dipole-allowed, intercombination, and forbidden transition probabilities for Fe V is presented. The Breit-Pauli R-matrix (BPRM) method is used to calculate 1.46 x 10^6 oscillator strengths for the allowed and intercombination E1 transitions among 3,865 fine-structure levels dominated by configuration complexes with n <= 10 and l <= 9. These data are complemented by an atomic structure configuration interaction (CI) calculation using the SUPERSTRUCTURE program for 362 relativistic quadrupole (E2) and magnetic dipole (M1) transitions among 65 low-lying levels dominated by the 3d^4 and 3d^ 4s configurations. Procedures have been developed for the identification of the large number of fine-structure levels and transitions obtained through the BPRM calculations. The target ion Fe VI is represented by an eigenfunction expansion of 19 fine-structure levels of 3d^3 and a set of correlation configurations. Fe V bound levels are obtained with angular and spin symmetries SL\pi and J\pi of the (e + Fe VI) system such that 2S+1 = 5,3,1, L <= 10, J <= 8 of even and odd parities. The completeness of the calculated dataset is verified in terms of all possible bound levels belonging to relevant LS terms and transitions in correspondence with the LS terms. The fine-structure averaged relativistic values are compared with previous Opacity Project LS coupling data and other works. The 362 forbidden transition probabilities considerably extend the available data for the E2 and M1 transtions, and are in good agreement with those computed by Garstang for the 3d^4 transitions.