Normalized to: Deiml, P.
[1]
oai:arXiv.org:1806.11308 [pdf] - 1716177
Characterisation and Testing of CHEC-M - a camera prototype for the
Small-Sized Telescopes of the Cherenkov Telescope Array
Zorn, J.;
White, R.;
Watson, J. J.;
Armstrong, T. P.;
Balzer, A.;
Barcelo, M.;
Berge, D.;
Bose, R.;
Brown, A. M.;
Bryan, M.;
Chadwick, P. M.;
Clark, P.;
Costantini, H.;
Cotter, G.;
Dangeon, L.;
Daniel, M.;
De Franco, A.;
Deiml, P.;
Fasola, G.;
Funk, S.;
Gebyehu, M.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hinton, J. A.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Leach, S. A.;
Blanc, O. Le;
Malouf, A.;
Molyneux, P.;
Moore, P.;
Prokoph, H.;
Okumura, A.;
Ross, D.;
Rowell, G.;
Sapozhnikov, L.;
Schoorlemmer, H.;
Sol, H.;
Stephan, M.;
Tajima, H.;
Tibaldo, L.;
Varner, G.;
Zink, A.
Submitted: 2018-06-29, last modified: 2018-07-16
The Compact High Energy Camera (CHEC) is a camera design for the Small-Sized
Telescopes (SSTs; 4 m diameter mirror) of the Cherenkov Telescope Array (CTA).
The SSTs are focused on very-high-energy $\gamma$-ray detection via atmospheric
Cherenkov light detection over a very large area. This implies many individual
units and hence cost-effective implementation. CHEC relies on dual-mirror
optics to reduce the plate-scale and make use of 6 $\times$ 6 mm$^2$ pixels,
leading to a low-cost ($\sim$150 kEuro), compact (0.5 m $\times$ 0.5 m), and
light ($\sim$45 kg) camera with 2048 pixels providing a camera FoV of $\sim$9
degrees. The electronics are based on custom TARGET (TeV array readout with
GSa/s sampling and event trigger) ASICs and FPGAs sampling incoming signals at
a gigasample per second, with flexible camera-level triggering within a single
backplane FPGA. CHEC is designed to observe in the $\gamma$-ray energy range of
1$-$300 TeV, and at impact distances up to $\sim$500 m. To accommodate this and
provide full flexibility for later data analysis, full waveforms with 96
samples for all 2048 pixels can be read out at rates up to $\sim$900 Hz. The
first prototype, CHEC-M, based on multi-anode photomultipliers (MAPMs) as
photosensors, was commissioned and characterised in the laboratory and during
two measurement campaigns on a telescope structure at the Paris Observatory in
Meudon. In this paper, the results and conclusions from the laboratory and
on-site testing of CHEC-M are presented. They have provided essential input on
the system design and on operational and data analysis procedures for a camera
of this type. A second full-camera prototype based on Silicon photomultipliers
(SiPMs), addressing the drawbacks of CHEC-M identified during the first
prototype phase, has already been built and is currently being commissioned and
tested in the laboratory.
