Radiative feedback from massive stars can potentially trigger star formation in the surrounding molecular gas. Inspired by the case of radiatively driven implosion in M16 or Eagle Nebula, we analyze a similar case of star formation observed in the Cygnus X region. We present new JCMT observations of $^{13}$CO(3-2) and C$^{18}$O(3-2) molecular lines of a cometary feature located at 50 pc north of the Cyg OB2 complex that was previously identified in $^{12}$CO(3-2) mapping. These data are combined with archival H$\alpha$, infrared, and radio continuum emission data, from which we measure the mass to be 110 M$_\odot$. We identify Cyg OB2 as the ionizing source. We measure the properties of two highly energetic molecular outflows and the photoionized rim. From this analysis, we argue the external gas pressure and gravitational energy dominate the internal pressure. The force balance along with previous simulation results and a close comparison with the case of Eagle Nebula favours a triggering scenario.

We determine the geometrical and viewing angle parameters of the Large Magellanic Cloud (LMC) using the Leavitt law based on a sample of more than $3500$ common classical Cepheids (FU and FO) in optical ($V,I$), near-infrared ($JHK_{s}$) and mid-infrared ($[3.6]~\mu$m and $[4.5]~\mu$m) photometric bands. Statistical reddening and distance modulus free from the effect of reddening to each of the individual Cepheids are obtained using the simultaneous multi-band fit to the apparent distance moduli from the analysis of the resulting Leavitt laws in these seven photometric bands. A reddening map of the LMC obtained from the analysis shows good agreement with the other maps available in the literature. Extinction free distance measurements along with the information of the equatorial coordinates $(\alpha,\delta)$ for individual stars are used to obtain the corresponding Cartesian coordinates with respect to the plane of the sky. By fitting a plane solution of the form $z=f(x,y)$ to the observed three dimensional distribution, the following viewing angle parameters of the LMC are obtained: inclination angle $i=25^{\circ}.110\pm 0^{\circ}.365$, position angle of line of nodes $\theta_{\text{lon}}=154^{\circ}.702\pm1^{\circ}.378$. On the other hand, modelling the observed three dimensional distribution of the Cepheids as a triaxial ellipsoid, the following values of the geometrical axes ratios of the LMC are obtained: $1.000\pm 0.003:1.151\pm0.003:1.890\pm 0.014$ with the viewing angle parameters: inclination angle of $i=11^{\circ}.920\pm 0^{\circ}.315$ with respect to the longest axis from the line of sight and position angle of line of nodes $\theta_{\rm lon} = 128^{\circ}.871\pm 0^{\circ}.569$. The position angles are measured eastwards from north.

We present a study of simultaneous determination of mean distance and reddening to the Small Magellanic Cloud (SMC) using the two photometric band RR Lyrae data. Currently available largest number of highly accurate and precise light curve data of the fundamental mode RR Lyrae stars (RRab) with better areal coverage released by the Optical Gravitational Lensing Experiment (OGLE)-IV project observed in the two photometric bands $(V,I)$ were utilised simultaneously in order to determine true distance and reddening independently for each of the individual RRab stars. Different empirical and theoretical calibrations leading to the determination of absolute magnitudes of RRab stars in the two bands, $V$ and $I$ along with their mean magnitudes were utilised to calculate the apparent distance moduli of each of these RRab stars in these two bands. Decomposing the apparent distance moduli into true distance modulus and reddening in each of these two bands, individual RRab distance and reddening were estimated solving the two apparent distance moduli equations. Modeling the observed distributions of the true distance moduli and reddenings of the SMC RRab stars as Gaussian, the true mean distance modulus and mean reddening value to the SMC were found to be {\bf $\mu_{0}=18.909\pm0.148$ mag and $E(B-V)=0.066\pm0.036$ mag, respectively. This corresponds to a distance of $D = 60.506\pm 4.126$~kpc to the SMC. The three dimensional distribution of the SMC RRab stars was approximated as ellipsoid. Then using the principal axes transformation method \citep{deb14} we find the axes ratios of the SMC: $1.000\pm0.001,1.113\pm 0.002, 2.986\pm0.023$ with $i=3^{\circ}.156\pm0^{\circ}.188$ and $\theta_{\text{lon}}=38^{\circ}.027\pm0.577$.} These results are in agreement with other recent independent previous studies using different tracers and methodologies.

The small atmosphereless objects of our solar system, such as asteroids, the moon are covered by layer of dust particles known as regolith, formed by meteoritic impact. The light scattering studies of such dust layer by laboratory experiment and numerical simulation are two important tools to investigate their physical properties. In the present work, the light scattered from a layer of dust particles, containing 0.3{\mu}m Al2O3 at wavelength 632.8 nm is analysed. This work has been performed by using a light scattering instrument 'ellipsometer', at the Department of Physics, Assam Universiy, Silchar, India. Through this experiment, we generated in laboratory the photometric and polarimetric phase curves of light scattered from such a layer. In order to numerically simulate this data, we used Hapke's model combined with Mie's single particle scattering properties. The perpendicular and parallel components of single particle albedo and the phase function were derived from Mie theory. By using the Hapke's model combined with Mie theory, the physical properties of the dust grain such as grain size, optical constant (n,k) and wavelength can be studied through this scheme. In literature, till today no theoretical model to represent polarisation caused due to scattering from rough surface is available, which can successfully explain the scattering process. So the main objective of this work is to develop a model which can theoretically estimate polarisation as caused due to scattering from rough surface and also to validate our model with the laboratory data generated in the present work.

We present a detailed V-band photometric light curve modeling of 30 eclipsing binaries using the data from Pietrukowicz et al. (2009) collected with the European Southern Observatory Very Large Telescope (ESO VLT) of diameter 8-m. The light curve of these 30 eclipsing binaries were selected out of 148 of them available in the database on the basis of complete phase coverage, regular and smooth phased light curve shapes. Eclipsing binaries play pivotal role in the direct measurement of astronomical distances more accurately simply from their geometry of light curves. The accurate value of Hubble constant (H0) which measures the rate of expansion of the Universe heavily relies on extragalactic distance scale measurements. Classification of the selected binary stars in the sample were done, preliminarily on the basis of Fourier parameters in the a2-a4 plane and final classification was obtained from the Roche lobe geometry. Out of these 30 eclipsing binaries, only one was found to be detached binary system while the rest 29 of them belong to the contact binary systems. These contact binaries were further classified into the A-type and W-type based on their mass ratios. Since spectroscopic mass ratio measurements were not available for any of these binary stars, we determined the mass ratios through photometric light curve modeling with the aid of Wilson-Devinney code as implemented in PHOEBE. Various geometrical parameters and physical parameters of astrophysical importance viz., mass, radius and luminosity were obtained from the light curves of the selected stars.

We present a study of three-dimensional structure of the Small Magellanic Cloud (SMC). The $V$- and $I$-band light curves of the fundamental mode RR Lyrae stars (RRab) obtained by the Optical Gravitational Lensing Experiment (OGLE)-III project were utilized in order to comprehend the SMC structure. The $[Fe/H]-P-\phi_{31}$ relation of \citet{jurc96} is exploited to obtain the metallicities. From the three-dimensional RRab distance distributions, northeast (NE) arm and main body of the galaxy is identified. Combining metallicities with spatial distribution of these tracers, no radial metallicity gradient in the SMC has been detected. Dividing the entire sample into three parts: northeastern (NE), central and southwestern (SW), we find that the central part has a significantly larger line of sight depth as compared to rest of the parts, indicating that the SMC may have a bulge. Results obtained from the $I$-band data seem to be reliable and were further substantiated using the \citet{smol05} relation. Distribution of SMC RRab stars were modeled as a tri-axial ellipsoid. Errors in structural parameters of the SMC ellipsoid were obtained from Monte Carlo simulations. We estimated the axes ratios of the galaxy as $1.00\pm 0.000:1.310\pm 0.029:8.269\pm0.934$, the inclination of the longest axis with line of sight $i = 2^{\circ}.265\pm 0^{\circ}.784$, and the position angle of the line of nodes $\theta_{\text{lon}}=74^{\circ}.307\pm 0^{\circ}.509$ from the variance weighted $I$-band determinations.

We present a careful and detailed light curve analysis of publicly available $I$-band data on fundamental mode RR Lyrae (RRab) stars of the Large Magellanic Cloud (LMC) obtained by the Optical Gravitational Lensing Experiment (OGLE) phase-III project. Using the Fourier parameters of $13,095$ RRab stars, metallicities and absolute magnitudes of individual stars are obtained. The representation of stars on the $P-\phi_{31}^{V}$ plane shows the existence of three significant metallicity groups with mean metallicities as $-1.20 \pm 0.12$ dex, $-1.57 \pm 0.10$ dex and $-1.89 \pm 0.09$ dex. The corresponding absolute magnitudes of these three groups are obtained as $0.70\pm 0.08$ mag, $0.59 \pm 0.06$ mag and $0.49 \pm 0.08$ mag, respectively. Distribution of these three groups as a function of vertical $|z|$ distance indicates that the formation of the LMC disk predates the formation of the inner halo. Issue of the existence of a metallicity gradient as a function of galactocentric distances has also been addressed. Approximating the structure of the LMC disk as a triaxial ellipsoid, the inclination angle ($i$) relative to the plane of the sky and the position angle of the line of nodes ($\theta_{lon}$) were estimated as $24^{\circ}.20$ and $176^{\circ}.01$, respectively. The axes ratios and the eccentricity were also determined using the principal axes transformation method.

We have developed an algorithm (x2abundance) to derive the lunar surface chemistry from X-ray fluorescence (XRF) data for the Chandrayaan-1 X-ray Spectrometer (C1XS) experiment. The algorithm converts the observed XRF line fluxes to elemental abundances with uncertainties. We validated the algorithm in the laboratory using high Z elements (20 < Z < 30) published in Athiray et al. (2013). In this paper, we complete the exercise of validation using samples containing low Z elements, which are also analogous to the lunar surface composition (ie., contains major elements between 11 < Z < 30). The paper summarizes results from XRF experiments performed on Lunar simulant (JSC-1A) and anorthosite using a synchrotron beam excitation. We also discuss results from the validation of x2abundance using Monte Carlo simulation (GEANT4 XRF simulation).

We report a mass reconstruction of A1689 using Particle Based Lensing (PBL), a new technique for Strong+Weak lensing that allows a variable resolution depending on the data density and the signal-to-noise. Using PBL we also calculate the covariance matrix for the resulting mass map. The reconstruction of A1689 shows a secondary mass peak in the north-east direction confirming previous optical observations. This indicates that the central region of the cluster is still undergoing a weak merger. We have used this mass map to measure power ratios of the dark matter distribution and compared it to the X-ray distribution. We find that the power in the X-ray distribution is lower suggesting a smoother and rounder gas distribution compared to the dark matter distribution. We fitted an NFW profile to the profile derived from the mass map and we find that the lensing mass within 1 Mpc is $1.5\pm0.33\times 10^{15}M_\odot$. This is higher than the X-ray mass.

We present a detailed light curve analysis of publicly available V band observations of 62 binary stars, mostly contact binaries, obtained by the All Sky Automated Survey (ASAS)-3 project between 2000 and 2009. Eclipsing binaries are important astronomical targets for determining the physical parameters of component stars from the geometry. They provide an independent direct method of measuring the radii of stars. We improved the ASAS determined periods, ephemeris and obtained the Fourier parameters from the phased light curves of these 62 stars. These Fourier parameters were used for preliminary classification of the stars in our sample. The phased light curves were then analysed with the aid of the Wilson-Devinney light curve modelling technique in order to obtain various geometrical and physical parameters of these binaries. The spectroscopic mass ratios as determined from the the radial velocity measurements available in the literature were used as one of the inputs to the light curve modelling. Thus reliable estimations of parameters of these binaries were obtained with combined photometric and spectroscopic data and error estimates were made using the heuristic scan method.

We present a CCD photometric study of the star with ASAS ID 134738 + 0410.1 using V band observations obtained from the $IUCAA$ Girawali Observatory (IGO) 2-metre telescope, India. The star was selected from the $\delta$ Scuti database of All Sky Automated Survey (ASAS) (Pojmanski 2002). Our analysis reveals that the star is not a $\delta$ Scuti variable but is in fact a W UMa type contact binary with an orbital period of 0.2853067 day. Two new times of primary and secondary minima were determined from the observed data. A preliminary solution obtained using the Wilson-Devinney light curve modelling technique indicates that the star is more likely a partially-eclipsing W UMa type contact binary. However, the determination of actual subtype of this binary is quite impossible from the photometry alone, as the observed light curve can fitted for both A- and W-type solutions. The exact classification of this binary needs to be determined from high resolution spectroscopy.

We present CCD photometric observations of the W UMa type contact binary EK Comae Berenices using the 2 metre telescope of $IUCAA$ Girawali Observatory, India. The star was classified as a W UMa type binary of subtype-W by \citet{sam1996}. The new V band photometric observations of the star reveal that shape of the light curve has changed significantly from the one observed by \citet{sam1996}. A detailed analysis of the light curve obtained from the high-precision CCD photometric observations of the star indicates that EK Comae Berenices is not a W-type but an A-type totally eclipsing W UMa contact binary. The photometric mass ratio is determined to be 0.349 $\pm$ 0.005. A temperature difference of $\Delta T = 141 \pm 10 $ K between the components and an orbital inclination of $i [^{o}] = 89.800 \pm 0.075$ were obtained for the binary system. Absolute values of masses, radii and luminosities are estimated by means of the standard mass-luminosity relation for zero age main-sequence stars. The star shows O'Connell effect, asymmetries in the light curve shape around the primary and secondary maximum. The observed O'Connell effect is explained by the presence of a hot spot on the primary component.

We present B band photometry of the $\delta$ Scuti star HD 40372 using the ARIES three channel fast photometer attached to the 104-cm Sampurnanand telescope in high-speed photometric mode. The star was observed for $\sim$ 5 hours on December 13, 2008. Based on the high quality photometric data, we have done period analysis by various periodogram analysis techniques. The best estimate of the period is found to be $\sim 0.067$ days. With this period and the other stellar parameters determined from $uvby\beta$ photometry available in the literature, we have calculated the $Q$ value for the star. Comparison of this $Q$ value with that determined from the model calculations shows that the star is pulsating in p$_{3}$ mode with $l = 2$.

We present a non-parametric measure of the ellipticity and the alignment of the dark matter halos in Abell 901/902 supercluster. This super-cluster is a system of four separate peaks in a $0.5^{\circ}\times0.5^{\circ}$ field of view. We map the mass distribution of each individual peak using an improved version of Particle Based Lensing (PBL) and measure the ellipticity of the dark matter halos associated with two of the peaks directly from the mass map and by fitting them to a singular isothermal ellipse. The parametric and non-parametric measurements are consistent for A901b while the position angle for the Southwest Group is different for the two techniques. We account for this discrepancy to substructure present in the Southwest Peak. We estimate an axis ratio of $0.37\pm 0.1$ for A901b and $0.54^{+0.08}_{-0.09}$ for the Southwest Group.

We present a careful and detailed light curve analysis of RR Lyrae stars in the Small Magellanic Cloud (SMC) discovered by the Optical Gravitational Lensing Experiment (OGLE) project. Out of 536 single mode RR Lyrae stars selected from the database, we have investigated the physical properties of 335 `normal looking' RRab stars and 17 RRc stars that have good quality photometric light curves. We have also been able to estimate the distance modulus of the cloud which is in good agreement with those determined from other independent methods. The Fourier decomposition method has been used to study the basic properties of these variables. Accurate Fourier decomposition parameters of 536 RR Lyrae stars in the OGLE-II database are computed. Empirical relations between the Fourier parameters and some physical parameters of these variables have been used to estimate the physical parameters for the stars from the Fourier analysis. Further, the Fourier decomposition of the light curves of the SMC RR Lyrae stars yields their mean physical parameters as: [Fe/H] = -1.56 $\pm 0.25$, M = 0.55 $\pm $ 0.01 M$_{\odot}$, T$_{\rm eff} = 6404 \pm 12$ K, $\log \rm L = 1.60 \pm0.01 \rm L_\odot$ and M$\rm_V = 0.78 \pm0.02 $ for 335 RRab variables and [Fe/H] = -1.90 $\pm$ 0.13, M = 0.82 $\pm $ 0.18 M$_{\odot}$, T$_{\rm eff} = 7177 \pm 16$ K, $\log \rm L = 1.62 \pm 0.02 \rm L_{\odot}$ and M$\rm_V = 0.76 \pm 0.05$ for 17 RRc stars.

Aims: We show the use of principal component analysis (PCA) and Fourier decomposition (FD) method as tools for variable star diagnostics and compare their relative performance in studying the changes in the light curve structures of pulsating Cepheids and in the classification of variable stars. Methods: We have calculated the Fourier parameters of 17,606 light curves of a variety of variables, e.g., RR Lyraes, Cepheids, Mira Variables and extrinsic variables for our analysis. We have also performed PCA on the same database of light curves. The inputs to the PCA are the 100 values of the magnitudes for each of these 17,606 light curves in the database interpolated between phase 0 to 1. Unlike some previous studies, Fourier coefficients are not used as input to the PCA. Results: We show that in general, the first few principal components (PCs) are enough to reconstruct the original light curves compared to FD method where 2 to 3 times more number of parameters are required to satisfactorily reconstruct the light curves. The computation of required number of Fourier parameters on the average needs 20 times more CPU time than the computation of required number of PCs. Therefore, PCA does have some advantage over the FD method in analysing the variable stars in a larger database. However in some cases, particularly in finding the resonances in Fundamental mode (FU) Cepheids, the PCA results show no distinct advantages over the FD method. We also demonstrate that the PCA technique can be used to classify variables into different variability classes in an automated, unsupervised way, a feature that has immense potential for larger databases of the future.

We present Particle-Based Lensing (PBL), a new technique for gravitational lensing mass reconstructions of galaxy clusters. Traditionally, most methods have employed either a finite inversion or gridding to turn observational lensed galaxy ellipticities into an estimate of the surface mass density of a galaxy cluster. We approach the problem from a different perspective, motivated by the success of multi-scale analysis in smoothed particle hydrodynamics. In PBL, we treat each of the lensed galaxies as a particle and then reconstruct the potential by smoothing over a local kernel with variable smoothing scale. In this way, we can tune a reconstruction to produce constant signal-noise throughout, and maximally exploit regions of high information density. PBL is designed to include all lensing observables, including multiple image positions and fluxes from strong lensing, as well as weak lensing signals including shear and flexion. In this paper, however, we describe a shear-only reconstruction, and apply the method to several test cases, including simulated lensing clusters, as well as the well-studied ``Bullet Cluster'' (1E0657-56). In the former cases, we show that PBL is better able to identify cusps and substructures than are grid-based reconstructions, and in the latter case, we show that PBL is able to identify substructure in the Bullet Cluster without even exploiting strong lensing measurements. We also make our codes publicly available.