Due to their close proximity, the Large and Small Magellanic Clouds (SMC/LMC) provide natural laboratories for understanding how galaxies form and evolve. With the goal of determining the structure and dynamical state of the SMC, we present new spectroscopic data for $\sim$ 3000 SMC red giant branch stars observed using the AAOmega spectrograph at the Anglo-Australian Telescope. We complement our data with further spectroscopic measurements from previous studies that used the same instrumental configuration and proper motions from the \textit{Gaia} Data Release 2 catalogue. Analysing the photometric and stellar kinematic data, we find that the SMC centre of mass presents a conspicuous offset from the velocity centre of its associated $\mbox{H\,{\sc i}}$ gas, suggesting that the SMC gas is likely to be far from dynamical equilibrium. Furthermore, we find evidence that the SMC is currently undergoing tidal disruption by the LMC within 2\,kpc of the centre of the SMC, and possibly all the way in to the very core. This is evidenced by a net outward motion of stars from the SMC centre along the direction towards the LMC and apparent tangential anisotropy at all radii. The latter is expected if the SMC is undergoing significiant tidal stripping, as we demonstrate using a suite of $N$-body simulations of the SMC/LMC system disrupting around the Milky Way. These results suggest that dynamical models for the SMC that assume a steady state will need to be revisited.

The Q & U Bolometric Interferometer for Cosmology, QUBIC, is an innovative experiment designed to measure the polarization of the Cosmic Microwave Background and in particular the signature left therein by the inflationary expansion of the Universe. The expected signal is extremely faint, thus extreme sensitivity and systematic control are necessary in order to attempt this measurement. QUBIC addresses these requirements using an innovative approach combining the sensitivity of Transition Edge Sensor cryogenic bolometers, with the deep control of systematics characteristic of interferometers. This makes QUBIC unique with respect to others classical imagers experiments devoted to the CMB polarization. In this contribution we report a description of the QUBIC instrument including recent achievements and the demonstration of the bolometric interferometry performed in lab. QUBIC will be deployed at the observation site in Alto Chorrillos, in Argentina at the end of 2019.

QUBIC (Q \& U Bolometric Interferometer for Cosmology) is an international ground-based experiment dedicated in the measurement of the polarized fluctuations of the Cosmic Microwave Background (CMB). It is based on bolometric interferometry, an original detection technique which combine the immunity to systematic effects of an interferometer with the sensitivity of low temperature incoherent detectors. QUBIC will be deployed in Argentina, at the Alto Chorrillos mountain site near San Antonio de los Cobres, in the Salta province. The QUBIC detection chain consists in 2048 NbSi Transition Edge Sensors (TESs) cooled to 350mK.The voltage-biased TESs are read out with Time Domain Multiplexing based on Superconducting QUantum Interference Devices (SQUIDs) at 1 K and a novel SiGe Application-Specific Integrated Circuit (ASIC) at 60 K allowing to reach an unprecedented multiplexing (MUX) factor equal to 128. The QUBIC experiment is currently being characterized in the lab with a reduced number of detectors before upgrading to the full instrument. I will present the last results of this characterization phase with a focus on the detectors and readout system.

Understanding the evolutionary history of the Magellanic Clouds requires an in-depth exploration and characterization of the stellar content in their outer regions, which ultimately are key to tracing the epochs and nature of past interactions. We present new deep images of a shell-like over-density of stars in the outskirts of the Small Magellanic Cloud (SMC). The shell, also detected in photographic plates dating back to the fifties, is located at ~1.9 degr from the center of the SMC in the north-east direction.The structure and stellar content of this feature were studied with multi-band, optical data from the Survey of the MAgellanic Stellar History (SMASH) carried out with the Dark Energy Camera on the Blanco Telescope at Cerro Tololo Inter-American Observatory. We also investigate the kinematic of the stars in the shell using the Gaia Data Release 2. The shell is composed of a young population with an age ~ 150 Myr, with no contribution from an old population. Thus, it is hard to explain its origin as the remnant of a tidally disrupted stellar system. The spatial distribution of the young main-sequence stars shows a rich sub-structure, with a spiral arm-like feature emanating from the main shell and a separated small arc of young stars close to the globular cluster NGC 362. We find that the absolute g-band magnitude of the shell is M_{g,shell} = -10.78+/- 0.02, with a surface brightness of mu_{g,shell} = 25.81+/- 0.01 mag/arcsec^{2}. We have not found any evidence that this feature is of tidal origin or a bright part of a spiral arm-like structure. Instead, we suggest that the shell formed in a recent star formation event, likely triggered by an interaction with the Large Magellanic Cloud and/or the Milky Way, ~150 Myr ago.

In this paper we describe QUBIC, an experiment that will observe the polarized microwave sky with a novel approach, which combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. QUBIC unique features are the so-called "self-calibration", a technique that allows us to clean the measured data from instrumental effects, and its spectral imaging power, i.e. the ability to separate the signal in various sub-bands within each frequency band. QUBIC will observe the sky in two main frequency bands: 150 GHz and 220 GHz. A technological demonstrator is currently under testing and will be deployed in Argentina during 2019, while the final instrument is expected to be installed during 2020.

QUBIC, the QU Bolometric Interferometer for Cosmology, is a novel forthcoming instrument to measure the B-mode polarization anisotropy of the Cosmic Microwave Background. The detection of the B-mode signal will be extremely challenging; QUBIC has been designed to address this with a novel approach, namely bolometric interferometry. The receiver cryostat is exceptionally large and cools complex optical and detector stages to 40 K, 4 K, 1 K and 350 mK using two pulse tube coolers, a novel 4He sorption cooler and a double-stage 3He/4He sorption cooler. We discuss the thermal and mechanical design of the cryostat, modelling and thermal analysis, and laboratory cryogenic testing.

In this paper we describe QUBIC, an experiment that takes up the challenge posed by the detection of primordial gravitational waves with a novel approach, that combines the sensitivity of state-of-the art bolometric detectors with the systematic effects control typical of interferometers. The so-called "self-calibration" is a technique deeply rooted in the interferometric nature of the instrument and allows us to clean the measured data from instrumental effects. The first module of QUBIC is a dual band instrument (150 GHz and 220 GHz) that will be deployed in Argentina during the Fall 2018.

We present a new framework were we simultaneously fit strong lensing (SL) and dynamical data. The SL analysis is based on LENSTOOL, and the dynamical analysis uses MAMPOSSt code, which we have integrated into LENSTOOL. After describing the implementation of this new tool, we apply it on the galaxy group SL2S\,J02140-0535 ($z_{\rm spec}=0.44$), which we have already studied in the past. We use new VLT/FORS2 spectroscopy of multiple images and group members, as well as shallow X-ray data from \xmm. We confirm that the observed lensing features in SL2S\,J02140-0535 belong to different background sources. One of this sources is located at $z_{\rm spec}$ = 1.017 $\pm$ 0.001, whereas the other source is located at $z_{\rm spec}$ = 1.628 $\pm$ 0.001. With the analysis of our new and our previously reported spectroscopic data, we find 24 secure members for SL2S\,J02140-0535. Both data sets are well reproduced by a single NFW mass profile: the dark matter halo coincides with the peak of the light distribution, with scale radius, concentration, and mass equal to $r_s$ =$82^{+44}_{-17}$ kpc , $c_{200}$ = $10.0^{+1.7}_{-2.5}$, and $M_{200}$ = $1.0^{+0.5}_{-0.2}$ $\times$ 10$^{14}$M$_{\odot}$ respectively. These parameters are better constrained when we fit simultaneously SL and dynamical information. The mass contours of our best model agrees with the direction defined by the luminosity contours and the X-ray emission of SL2S\,J02140-0535. The simultaneous fit lowers the error in the mass estimate by 0.34 dex, when compared to the SL model, and in 0.15 dex when compared to the dynamical method.The combination of SL and dynamics tools yields a more accurate probe of the mass profile of SL2S\,J02140-0535 up to $r_{200}$. However, there is tension between the best elliptical SL model and the best spherical dynamical model.

Microvariability consists in small time scale variations of low amplitude in the photometric light curves of quasars, and represents an important tool to investigate their inner core. Detection of quasar microvariations is challenging for their non-periodicity, as well as the need for high monitoring frequency and high signal-to-noise ratio. Statistical tests developed for the analysis of quasar differential light curves usually show either low power or low reliability, or both. In this paper we compare two statistical procedures that include several stars to perform tests with enhanced power and high reliability. We perform light curve simulations of variable quasars and non-variable stars, and analyze them with statistical procedures developed from the F-test and the analysis of variance. The results show a large improvement in the power of both statistical probes, and a larger reliability, when several stars are included in the analysis. The results from the simulations agree with those obtained from observations of real quasars. The high power and high reliability of the tests discussed in this paper improve the results that can be obtained from short and long time scale variability studies. These techniques are not limited to quasar variability; on the contrary, they can be easily implemented to other sources such as variable stars. Their applications to future research and to the analysis of large field photometric monitoring archives can reveal new variable sources.

(Abridged) The HST Frontier Fields project started at the end of 2013 with the aim of providing extremely deep images of 6 massive galaxy clusters. One of the main goals of this program is to push several telescopes to their limits in order to provide the best current view of the earliest stages of the Universe. We present a detailed analysis of $z$$\sim$8 objects behind the HFFs lensing cluster, MACS0416-2403, combining 0.3-1.6 $\mu$m imaging from HST, ground-based $K_s$ imaging from VLT HAWK-I, and 3.6 $\mu$m and 4.5 $\mu$m Spitzer Space Telescope. We apply the classical Lyman Break technique, combining non-detection criteria and color-selection. In order to avoid contamination by mid-$z$ interlopers, we require a strong break between optical and near infrared data. The luminosity function at $z$$\sim$8 is computed using a MC method taking advantage of the SED-fitting results. A piece of cautionary information is gleaned from new deep optical photometry of a previously identified $z$$\sim$8 galaxy in this cluster, which is now firmly detected as a mid-$z$ interloper with a strong $\approx1.5$ mag Balmer break (between F606W and F125W). Using the SED of this interloper, we estimate the contamination rate of our MACS0416$-$2403 sample, as well as for previous samples in Abell 2744 based on HFF data. Our selection recovers 4 robust objects with m$_{F160W}$ ranging from 26.0 to 27.9 AB and located in modest amplification regions ($\mu<$2.4). Two of the objects display a secondary break between the IRAC 3.6 $\mu$m and 4.5 $\mu$m bands which could be associated to the Balmer break or emission lines at $z$$\sim$8. The candidates generally have star formation rates around $\sim$10 M$_{\odot}$/yr and sizes ranging from 0.2 to 0.5 kpc, in good agreement with previous observations and expectations for objects in the early Universe.

Lyman-alpha emitter (LAE) surveys have successfully used the excess in a narrow-band filter compared to a nearby broad-band image to find candidates. However, the odd spectral energy distribution (SED) of LAEs combined with the instrumental profile have important effects on the properties of the candidate samples extracted from these surveys. We investigate the effect of the bandpass width and the transmission profile of the narrow-band filters used for extracting LAE candidates at redshifts z ~ 6.5 through Monte Carlo simulations, and we present pilot observations to test the performance of tunable filters to find LAEs and other emission-line candidates. We compare the samples obtained using a narrow ideal-rectangular-filter, the Subaru NB921 narrow-band filter, and sweeping across a wavelength range using the ultra-narrow-band tunable filters of the instrument OSIRIS, installed at the 10.4m Gran Telescopio Canarias. We use this instrument for extracting LAE candidates from a small set of real observations. Broad-band data from the Subaru, HST and Spitzer databases were used for fiting SEDs to calculate photometric redshifts and to identify interlopers. Narrow-band surveys are very efficient to find LAEs in large sky areas, but the samples obtained are not evenly distributed in redshift along the filter bandpass, and the number of LAEs with equivalent widths < 60 angstroms can be underestimated. These biased results do not appear in samples obtained using ultra-narrow-band tunable filters. However, the field size of tunable filters is restricted because of the variation of the effective wavelength across the image. Thus narrow-band and ultra-narrow-band surveys are complementary strategies to investigate high-redshift LAEs.

The identification and study of the first galaxies remains one of the most exciting topics in observational cosmology. The determination of the best possible observing strategies is a very important choice in order to build up a representative sample of spectroscopically confirmed sources at high-z (z>7), beyond the limits of present-day observations. This paper is intended to precisely adress the relative efficiency of lensing and blank fields in the identification and study of galaxies at 6<z<12. The detection efficiency and field-to-field variance are estimated from direct simulations of both blank and lensing fields observations. The presence of a strong-lensing cluster along the line of sight has a dramatic effect on the number of observed sources, with a positive magnification bias in typical ground-based ``shallow'' surveys (AB<~25.5). The positive magnification bias increases with the redshift of sources and decreases with both depth of the survey and the size of the surveyed area. The maximum efficiency is reached for lensing clusters at z~0.1-0.3. Observing blank fields in shallow surveys is particularly inefficient as compared to lensing fields if the UV LF for LBGs is strongly evolving at z>~7. Also in this case, the number of z>8 sources expected at the typical depth of JWST (AB~28-29) is much higher in lensing than in blank fields (e.g. a factor of ~10 for AB<~28). Blank field surveys with a large field of view are needed to prove the bright end of the LF at z>6-7, whereas lensing clusters are particularly useful for exploring the mid to faint end of the LF.