Using astrometric observations spanning more than a century and including a large set of Cassini data, we determine Saturn's tidal parameters through their current effects on the orbits of the eight main and four coorbital moons. We have used the latter to make the first determination of Saturn's Love number, $k_2=0.390 \pm 0.024$, a value larger than the commonly used theoretical value of 0.341 (Gavrilov & Zharkov, 1977), but compatible with more recent models (Helled & Guillot, 2013) for which $k_2$ ranges from 0.355 to 0.382. Depending on the assumed spin for Saturn's interior, the new constraint can lead to a reduction of up to 80% in the number of potential models, offering great opportunities to probe the planet's interior. In addition, significant tidal dissipation within Saturn is confirmed (Lainey et al., 2012) corresponding to a high present-day tidal ratio $k_2/Q=(1.59 \pm 0.74) \times 10^{-4}$ and implying fast orbital expansions of the moons. This high dissipation, with no obvious variations for tidal frequencies corresponding to those of Enceladus and Dione, may be explained by viscous friction in a solid core, implying a core viscosity typically ranging between $10^{14}$ and $10^{16}$ Pa.s (Remus et al., 2012). However, a dissipation increase by one order of magnitude at Rhea's frequency could suggest the existence of an additional, frequency-dependent, dissipation process, possibly from turbulent friction acting on tidal waves in the fluid envelope of Saturn (Ogilvie & Li, 2004). Alternatively, a few of Saturn's moons might themselves experience large tidal dissipation.

Accurate positional measurements of planets and satellites are used to improve our knowledge of their dynamics and to infer the accuracy of planet and satellite ephemerides. In the framework of the FP7 ESPaCE project, we provide the positions of Mars, Phobos, and Deimos taken with the U.S. Naval Observatory 26-inch refractor during the 1971 opposition of the planet. These plates were measured with the digitizer of the Royal Observatory of Belgium and reduced through an optimal process that includes image, instrumental, and spherical corrections to provide the most accurate data. We compared the observed positions of the planet Mars and its satellites with the theoretical positions from INPOP10 and DE430 planetary ephemerides, and from NOE and MAR097 satellite ephemerides. The rms residuals in RA and Dec. of one position is less than 60 mas, or about 20 km at Mars. This accuracy is comparable to the most recent CCD observations. Moreover, it shows that astrometric data derived from photographic plates can compete with those of old spacecraft (Mariner 9, Viking 1 and 2).

We present the results of determination of Pluto's positions derived from photographic plates taken in 1930 - 1960. Observations were made with Normal Astrograph at Pulkovo Observatory. Digitization of these plates was performed with high precision scanner at Royal Observatory of Belgium (ROB Digitizer). Mean values of standard errors of plate positions (x,y) lie between 12 and 18 mas. The UCAC4 catalogue was used as an astrometric calibrator. Standard errors of equatorial coordinates obtained are within 85 to 100 mas. Final table contains 63 positions of Pluto referred to the HCRF/UCAC4 frame.

The HERMES high-resolution spectrograph project aims at exploiting the specific potential of small but flexible telescopes in observational astrophysics. The optimised optical design of the spectrograph is based on the well-proven concept of white-pupil beam folding for high-resolution spectroscopy. In this contribution we present the complete project, including the spectrograph design and procurement details, the telescope adaptor and calibration unit, the detector system, as well as the optimised data-reduction pipeline. We present a detailed performance analysis to show that the spectrograph performs as specified both in optical quality and in total efficiency. With a spectral resolution of 85000 (63000 for the low-resolution fibre), a spectral coverage from 377 to 900nm in a single exposure and a peak efficiency of 28%, HERMES proves to be an ideal instrument for building up time series of high-quality data of variable (stellar) phenomena.

The StarScan machine at the U.S. Naval Observatory (USNO) completed measuring photographic astrograph plates to allow determination of proper motions for the USNO CCD Astrograph Catalog (UCAC) program. All applicable 1940 AGK2 plates, about 2200 Hamburg Zone Astrograph plates, 900 Black Birch (USNO Twin Astrograph) plates, and 300 Lick Astrograph plates have been measured. StarScan comprises of a CCD camera, telecentric lens, air-bearing granite table, stepper motor screws, and Heidenhain scales to operate in a step-stare mode. The repeatability of StarScan measures is about 0.2 micrometer. The CCD mapping as well as the global table coordinate system has been calibrated using a special dot calibration plate and the overall accuracy of StarScan x,y data is derived to be 0.5 micrometer. Application to real photographic plate data shows that position information of at least 0.65 micrometer accuracy can be extracted from course grain 103a-type emulsion astrometric plates. Transformations between "direct" and "reverse" measures of fine grain emulsion plate measures are obtained on the 0.3 micrometer level per well exposed stellar image and coordinate, which is at the limit of the StarScan machine.