Upcoming radio interferometers are aiming to image the sky at new levels of resolution and sensitivity, with wide-band image cubes reaching close to the Petabyte scale for SKA. Modern proximal optimization algorithms have shown a potential to significantly outperform CLEAN thanks to their ability to inject complex image models to regularize the inverse problem for image formation from visibility data. They were also shown to be scalable to large data volumes thanks to a splitting functionality enabling the decomposition of data into blocks, for parallel processing of block-specific data-fidelity terms of the objective function. In this work, the splitting functionality is further exploited to decompose the image cube into spatio-spectral facets, and enable parallel processing of facet-specific regularization terms in the objective. The resulting Faceted HyperSARA algorithm is implemented in MATLAB (code available on GitHub). Simulation results on synthetic image cubes confirm that faceting can provide a major increase in scalability at no cost in imaging quality. A proof-of-concept reconstruction of a 15 GB image of Cyg A from 7.4 GB of VLA data, utilizing 496 CPU cores on a HPC system for 68 hours, confirms both scalability and a quantum jump in imaging quality from CLEAN. Assuming slow spectral slope of Cyg A, we also demonstrate that Faceted HyperSARA can be combined with a dimensionality reduction technique, enabling utilizing only 31 CPU cores for 142 hours to form the Cyg A image from the same data, while preserving reconstruction quality. Cyg A reconstructed cubes are available online.

We propose a new approach within the versatile framework of convex optimization to solve the radio-interferometric wideband imaging problem. Our approach, dubbed HyperSARA, solves a sequence of weighted nuclear norm and l21 minimization problems promoting low rankness and joint average sparsity of the wideband model cube. On the one hand, enforcing low rankness enhances the overall resolution of the reconstructed model cube by exploiting the correlation between the different channels. On the other hand, promoting joint average sparsity improves the overall sensitivity by rejecting artefacts present on the different channels. An adaptive Preconditioned Primal-Dual algorithm is adopted to solve the minimization problem. The algorithmic structure is highly scalable to large data sets and allows for imaging in the presence of unknown noise levels and calibration errors. We showcase the superior performance of the proposed approach, reflected in high-resolution images on simulations and real VLA observations with respect to single channel imaging and the CLEAN-based wideband imaging algorithm in the WSCLEAN software. Our MATLAB code is available online on GITHUB.

We leverage the Sparsity Averaging Reweighted Analysis (SARA) approach for interferometric imaging, that is based on convex optimisation, for the super-resolution of Cyg A from observations at the frequencies 8.422GHz and 6.678GHz with the Karl G. Jansky Very Large Array (VLA). The associated average sparsity and positivity priors enable image reconstruction beyond instrumental resolution. An adaptive Preconditioned Primal-Dual algorithmic structure is developed for imaging in the presence of unknown noise levels and calibration errors. We demonstrate the superior performance of the algorithm with respect to the conventional CLEAN-based methods, reflected in super-resolved images with high fidelity. The high resolution features of the recovered images are validated by referring to maps of Cyg A at higher frequencies, more precisely 17.324GHz and 14.252GHz. We also confirm the recent discovery of a radio transient in Cyg A, revealed in the recovered images of the investigated data sets. Our matlab code is available online on GitHub.

Extremely high data rates expected in next-generation radio interferometers necessitate a fast and robust way to process measurements in a big data context. Dimensionality reduction can alleviate computational load needed to process these data, in terms of both computing speed and memory usage. In this article, we present image reconstruction results from highly reduced radio-interferometric data, following our previously proposed data dimensionality reduction method, $\mathrm{R}_{\mathrm{sing}}$, based on studying the distribution of the singular values of the measurement operator. This method comprises a simple weighted, subsampled discrete Fourier transform of the dirty image. Additionally, we show that an alternative gridding-based reduction method works well for target data sizes of the same order as the image size. We reconstruct images from well-calibrated VLA data to showcase the robustness of our proposed method down to very low data sizes in a 'real data' setting. We show through comparisons with the conventional reduction method of time- and frequency-averaging, that our proposed method produces more accurate reconstructions while reducing data size much further, and is particularly robust when data sizes are aggressively reduced to low fractions of the image size. $\mathrm{R}_{\mathrm{sing}}$ can function in a block-wise fashion, and could be used in the future to process incoming data by blocks in real-time, thus opening up the possibility of performing 'on-line' imaging as the data are being acquired. MATLAB code for the proposed dimensionality reduction method is available on GitHub.

Radio interferometric imaging aims to estimate an unknown sky intensity image from degraded observations, acquired through an antenna array. In the theoretical case of a perfectly calibrated array, it has been shown that solving the corresponding imaging problem by iterative algorithms based on convex optimization and compressive sensing theory can be competitive with classical algorithms such as CLEAN. However, in practice, antenna-based gains are unknown and have to be calibrated. Future radio telescopes, such as the SKA, aim at improving imaging resolution and sensitivity by orders of magnitude. At this precision level, the direction-dependency of the gains must be accounted for, and radio interferometric imaging can be understood as a blind deconvolution problem. In this context, the underlying minimization problem is non-convex, and adapted techniques have to be designed. In this work, leveraging recent developments in non-convex optimization, we propose the first joint calibration and imaging method in radio interferometry, with proven convergence guarantees. Our approach, based on a block-coordinate forward-backward algorithm, jointly accounts for visibilities and suitable priors on both the image and the direction-dependent effects (DDEs). As demonstrated in recent works, sparsity remains the prior of choice for the image, while DDEs are modelled as smooth functions of the sky, i.e. spatially band-limited. Finally, we show through simulations the efficiency of our method, for the reconstruction of both images of point sources and complex extended sources. MATLAB code is available on GitHub.

Modern radio telescopes, such as the Square Kilometre Array (SKA), will probe the radio sky over large fields-of-view, which results in large w-modulations of the sky image. This effect complicates the relationship between the measured visibilities and the image under scrutiny. In algorithmic terms, it gives rise to massive memory and computational time requirements. Yet, it can be a blessing in terms of reconstruction quality of the sky image. In recent years, several works have shown that large w-modulations promote the spread spectrum effect. Within the compressive sensing framework, this effect increases the incoherence between the sensing basis and the sparsity basis of the signal to be recovered, leading to better estimation of the sky image. In this article, we revisit the w-projection approach using convex optimisation in realistic settings, where the measurement operator couples the w-terms in Fourier and the de-gridding kernels. We provide sparse, thus fast, models of the Fourier part of the measurement operator through adaptive sparsification procedures. Consequently, memory requirements and computational cost are significantly alleviated, at the expense of introducing errors on the radio-interferometric data model. We present a first investigation of the impact of the sparse variants of the measurement operator on the image reconstruction quality. We finally analyse the interesting super-resolution potential associated with the spread spectrum effect of the w-modulation, and showcase it through simulations. Our C++ code is available online on GitHub.

Next generation radio-interferometers, like the Square Kilometre Array, will acquire tremendous amounts of data with the goal of improving the size and sensitivity of the reconstructed images by orders of magnitude. The efficient processing of large-scale data sets is of great importance. We propose an acceleration strategy for a recently proposed primal-dual distributed algorithm. A preconditioning approach can incorporate into the algorithmic structure both the sampling density of the measured visibilities and the noise statistics. Using the sampling density information greatly accelerates the convergence speed, especially for highly non-uniform sampling patterns, while relying on the correct noise statistics optimises the sensitivity of the reconstruction. In connection to CLEAN, our approach can be seen as including in the same algorithmic structure both natural and uniform weighting, thereby simultaneously optimising both the resolution and the sensitivity. The method relies on a new non-Euclidean proximity operator for the data fidelity term, that generalises the projection onto the $\ell_2$ ball where the noise lives for naturally weighted data, to the projection onto a generalised ellipsoid incorporating sampling density information through uniform weighting. Importantly, this non-Euclidean modification is only an acceleration strategy to solve the convex imaging problem with data fidelity dictated only by noise statistics. We showcase through simulations with realistic sampling patterns the acceleration obtained using the preconditioning. We also investigate the algorithm performance for the reconstruction of the 3C129 radio galaxy from real visibilities and compare with multi-scale CLEAN, showing better sensitivity and resolution. Our MATLAB code is available online on GitHub.

Galaxy clusters are known to host a variety of extended radio sources: tailed radio galaxies whose shape is modelled by the interaction with the intra-cluster medium (ICM); radio bubbles filling cavities in the ICM distribution and rising buoyantly through the thermal gas; diffuse giant radio sources ("halos" and "relics") revealing the presence of relativistic electrons and magnetic fields in the intra-cluster volume. It is currently the subject of an active debate how the non-thermal components that we observe at radio wavelengths affect the physical properties of the ICM and depend on the dynamical state of galaxy clusters. In this work we start our SKA1 feasibility study of the "radio cluster zoo" through simulations of a typical radio-loud cluster, hosting several bright tailed radio galaxies and a diffuse radio halo. Realistic simulations of SKA1 observations are obtained through the MeqTrees software. A new deconvolution algorithm, based on sparse representations and optimised for the detection of faint diffuse astronomical sources, is tested and compared to the classical CLEAN method.

(arXiv abridged abstract) The current years are seeing huge developments of radio telescopes and a tremendous increase of their capabilities. Such systems make mandatory the design of more sophisticated techniques not only for transporting, storing and processing this new generation of radio interferometric data, but also for restoring the astrophysical information contained in such data. In this paper we present a new radio deconvolution algorithm named MORESANE and its application to fully realistic simulated data of MeerKAT, one of the SKA precursors. This method has been designed for the difficult case of restoring diffuse astronomical sources which are faint in brightness, complex in morphology and possibly buried in the dirty beam's side lobes of bright radio sources in the field. MORESANE is a greedy algorithm which combines complementary types of sparse recovery methods in order to reconstruct the most appropriate sky model from observed radio visibilities. A synthesis approach is used for the reconstruction of images, in which the synthesis atoms representing the unknown sources are learned using analysis priors. We apply this new deconvolution method to fully realistic simulations of radio observations of a galaxy cluster and of an HII region in M31. We show that MORESANE is able to efficiently reconstruct images composed from a wide variety of sources from radio interferometric data. Comparisons with other available algorithms, which include multi-scale CLEAN and the recently proposed methods by Li et al. (2011) and Carrillo et al. (2012), indicate that MORESANE provides competitive results in terms of both total flux/surface brightness conservation and fidelity of the reconstructed model. MORESANE seems particularly well suited for the recovery of diffuse and extended sources, as well as bright and compact radio sources known to be hosted in galaxy clusters.

In the lead-up to the Square Kilometre Array (SKA) project, several next-generation radio telescopes and upgrades are already being built around the world. These include APERTIF (The Netherlands), ASKAP (Australia), eMERLIN (UK), VLA (USA), e-EVN (based in Europe), LOFAR (The Netherlands), Meerkat (South Africa), and the Murchison Widefield Array (MWA). Each of these new instruments has different strengths, and coordination of surveys between them can help maximise the science from each of them. A radio continuum survey is being planned on each of them with the primary science objective of understanding the formation and evolution of galaxies over cosmic time, and the cosmological parameters and large-scale structures which drive it. In pursuit of this objective, the different teams are developing a variety of new techniques, and refining existing ones. Here we describe these projects, their science goals, and the technical challenges which are being addressed to maximise the science return.