We study the dynamical evolution of Jupiter and Saturn embedded in a gaseous, solar-nebula-type disc by means of hydrodynamics simulations with the FARGO2D1D code. We study the evolution for different initial separations of the planets' orbits, Delta a_SJ , to investigate whether they become captured in mean motion resonance (MMR) and the direction of the subsequent migration of the planet (inward or outward). We also provide an assessment of the planet's orbital dynamics at different epochs of Saturn's growth. We find that the evolution of initially compact orbital configurations is dependent on the value of Delta a_SJ . This implies that an evolution as that proposed in the Grand Tack model depends on the precise initial orbits of Jupiter and Saturn and on the timescales for their formation. Capture in the 1:2 MMR and inward or (nearly) stalled migration are highly favoured. Within its limits, our work suggests that the reversed migration, associated with the resonance capture of Jupiter and Saturn, may be a low probability evolutionary scenario, so that other planetary systems with giant planets are not expected to have experienced a Grand Tack-like evolutionary path.

We investigate via numerical modeling the effects of two planets locked in resonance, and migrating outward, on the dust distribution of the natal circumstellar disk. We aim to test whether the dust distribution exhibits peculiar features arising from the interplay among the gravitational perturbations of the planets in resonance, the evolution of the gas, and its influence on the dust grains' dynamics. We focus on the 3:2 and 2:1 resonance, where the trapping may be caused by the convergent migration of a Jupiter- and Saturn-mass planet, preceding the common gap formation and ensuing outward (or inward) migration. Models show that a common gap also forms in the dust component -- similarly to what a single, more massive planet would generate -- and that outward migration leads to a progressive widening of the dust gap and to a decoupling from the gas gap. As the system evolves, a significantly wider gap is observed in the dust distribution, which ceases to overlap with the gas gap in the inner disk regions. At the outer edge of the gas gap, outward migration of the planets produces an over-density of dust particles, which evolve differently in the 3:2 and 2:1 resonances. For the 3:2, the dust trap at the gap's outer edge is partly efficient and a significant fraction of the grains filters through the gap. For the 2:1 resonance, the trap is more efficient and very few grains cross the gap, while the vast majority accumulate at the outer edge of the gap.

Formation of the planets in the Kepler-36 system is modeled by detailed numerical simulations according to the core-nucleated accretion scenario. The standard model is updated to include the dissolution of accreting rocky planetesimals in the gaseous envelope of the planet, leading to substantial enrichment of the envelope mass in heavy elements and a non-uniform composition with depth. For Kepler-36 c, models involving in situ formation and models involving orbital migration are considered. The results are compared with standard formation models. The calculations include the formation (accretion) phase, as well as the subsequent cooling phase, up to the age of Kepler-36 (7 Gyr). During the latter phase, mass loss induced by stellar XUV radiation is included. In all cases, the results fit the measured mass, 7.84 M$_\oplus$, and radius, 3.68 R$_\oplus$, of Kepler-36 c. Two parameters are varied to obtain these fits: the disk solid surface density at the formation location, and the "efficiency" factor in the XUV mass loss rate. The updated models are hotter and therefore less dense in the silicate portion of the planet and in the overlying layers of H/He, as compared with standard models. The lower densities mean that only about half as much H/He is needed to be accreted to fit the present-day mass and radius constraints. For Kepler-36 b, an updated in situ calculation shows that the entire H/He envelope is lost, early in the cooling phase, in agreement with observation.

Giant planets are tens to thousands of times as massive as the Earth, and many times as large. Most of their volumes are occupied by hydrogen and helium, the primary constituents of the protostellar disks from which they formed. Significantly, the solar system giants are also highly enriched in heavier elements relative to the Sun, indicating that solid material participated in their assembly. Giant planets account for most of the mass of our planetary system and of those extrasolar planetary systems in which they are present. Therefore, giant planets are primary actors in determining the orbital architectures of planetary systems and, possibly, in affecting the composition of terrestrial planets. This Chapter describes the principal route that, according to current knowledge, can lead to the formation of giant planets, the core nucleated accretion model, and an alternative route, the disk instability model, which may lead to the formation of planetary-mass objects on wide orbits.

The discovery of thousands of exoplanets over the last couple of decades has shown that the birth of planets is a very efficient process in nature. Theories invoke a multitude of mechanisms to describe the assembly of planets in the disks around pre-main-sequence stars, but observational constraints have been sparse on account of insufficient sensitivity and resolution. Understanding how planets form and interact with their parental disk is crucial also to illuminate the main characteristics of a large portion of the full population of planets that is inaccessible to current and near-future observations. This White Paper describes some of the main issues for our current understanding of the formation and evolution of planets, and the critical contribution expected in this field by the Next Generation Very Large Array.

We present formation simulations of the six Kepler 11 planets. Models assume either in situ or ex situ assembly, the latter with migration, and are evolved to the estimated age of the system, 8 Gyr. Models combine detailed calculations of both the gaseous envelope and the condensed core structures, including accretion of gas and solids, of the disk's viscous and thermal evolution, including photo-evaporation and disk-planet interactions, and of the planets' evaporative mass loss after disk dispersal. Planet-planet interactions are neglected. Both sets of simulations successfully reproduce measured radii, masses, and orbital distances of the planets, except for the radius of Kepler 11b, which loses its entire gaseous envelope shortly after formation. Gaseous (H+He) envelopes account for < 18% of the planet masses, and between 35 and 60% of the planet radii. In situ models predict a very massive inner disk, whose solids' surface density (sigma_Z) varies from over 1e4 to 1e3 g/cm2 at stellocentric distances 0.1 < r < 0.5 AU. Initial gas densities would be in excess of 1e5 g/cm2 if solids formed locally. Given the high disk temperatures (> 1000 K), planetary interiors can only be composed of metals and highly refractory materials. Sequestration of hydrogen by the core and subsequent outgassing is required to account for the observed radius of Kepler 11b. Ex situ models predict a relatively low-mass disk, whose initial sigma_Z varies from 10 to 5 g/cm2 at 0.5 < r < 7 AU and whose initial gas density ranges from 1e3 to 100 g/cm2. All planetary interiors are expected to be rich in H2O, as core assembly mostly occurs exterior to the ice condensation front. Kepler 11b is expected to have a steam atmosphere, and H2O is likely mixed with H+He in the envelopes of the other planets. Results indicate that Kepler 11g may not be more massive than Kepler 11e.

We study the evolution of planetesimals in evolved gaseous disks, which orbit a solar-mass star and harbor a Jupiter-mass planet at a_p~5AU. The gas dynamics is modeled with a three-dimensional hydrodynamics code that employes nested-grids and achieves a resolution of one Jupiter's radius in the circumplanetary disk. The code models solids as individual particles. Planetesimals are subjected to gravitational forces by the star and the planet, drag force by the gas, disruption via ram pressure, and mass loss through ablation. The mass evolution of solids is calculated self-consistently with their temperature, velocity, and position. We consider icy and icy/rocky bodies of radius 0.1-100km, initially deployed on orbits around the star within a few Hill radii (Rhill) of the planet's orbit. Planetesimals are scattered inward, outward, and toward disk regions of radius r>>a_p. Scattering can relocate significant amounts of solids, provided that regions |r-a_p|~ 3Rhill are replenished with planetesimals. Scattered bodies can be temporarily captured on planetocentric orbits. Ablation consumes nearly all solids at gas temperatures > ~220K. Super-keplerian rotation around and beyond the outer edge of the gas gap can segregate < ~0.1km bodies, producing solid gap edges at size-dependent radial locations. Capture, break-up, and ablation of solids result in a dust-laden circumplanetary disk with low surface densities of km-size planetesimals, implying relatively long timescales for satellite formation. After a giant planet acquires most of its mass, accretion of solids is unlikely to alter significantly its heavy-element content. The luminosity generated by solids' accretion can be of a similar order of magnitude to the contraction luminosity.

We present calculations of the early stages of the formation of Jupiter via core nucleated accretion and gas capture. The core begins as a seed body of about 350 kilometers in radius and orbits in a swarm of planetesimals whose initial radii range from 15 meters to 50 kilometers. The evolution of the swarm accounts for growth and fragmentation, viscous and gravitational stirring, and for drag-assisted migration and velocity damping. During this evolution, less than 9% of the mass is in planetesimals smaller than 1 kilometer in radius; < ~25% is in planetesimals with radii between 1 and 10 kilometers; and < ~7% is in bodies with radii larger than 100 kilometers. Gas capture by the core substantially enhances the size-dependent cross-section of the planet for accretion of planetesimals. The calculation of dust opacity in the planet's envelope accounts for coagulation and sedimentation of dust particles released as planetesimals are ablated. The calculation is carried out at an orbital semi-major axis of 5.2 AU and the initial solids' surface density is 10 g/cm^2 at that distance. The results give a core mass of nearly 7.3 Earth masses (Mearth) and an envelope mass of approximately 0.15 Mearth after about 4e5 years, at which point the envelope growth rate surpasses that of the core. The same calculation without the envelope yields a core of only about 4.4 Mearth.

Astronomy is undergoing through a methodological revolution triggered by an unprecedented wealth of complex and accurate data. The new panchromatic, synoptic sky surveys require advanced tools for discovering patterns and trends hidden behind data which are both complex and of high dimensionality. We present DAMEWARE (DAta Mining & Exploration Web Application REsource): a general purpose, web-based, distributed data mining environment developed for the exploration of large datasets, and finely tuned for astronomical applications. By means of graphical user interfaces, it allows the user to perform classification, regression or clustering tasks with machine learning methods. Salient features of DAMEWARE include its capability to work on large datasets with minimal human intervention, and to deal with a wide variety of real problems such as the classification of globular clusters in the galaxy NGC1399, the evaluation of photometric redshifts and, finally, the identification of candidate Active Galactic Nuclei in multiband photometric surveys. In all these applications, DAMEWARE allowed to achieve better results than those attained with more traditional methods. With the aim of providing potential users with all needed information, in this paper we briefly describe the technological background of DAMEWARE, give a short introduction to some relevant aspects of data mining, followed by a summary of some science cases and, finally, we provide a detailed description of a template use case.

We perform global three-dimensional (3D) radiation-hydrodynamics calculations of the envelopes surrounding young planetary cores of 5, 10, and 15 Earth masses, located in a protoplanetary disk at 5 and 10 AU from a solar-mass star. We apply a nested-grid technique to resolve the thermodynamics of the disk at the orbital-radius length scale and that of the envelope at the core-radius length scale. The gas is modeled as a solar mixture of molecular and atomic hydrogen, helium, and their ions. The equation of state accounts for both gas and radiation, and gas energy includes contributions from rotational and vibrational states of molecular hydrogen and from ionization of atomic species. Dust opacities are computed from first principles, applying the full Mie theory. One-dimensional (1D) calculations of planet formation are used to supplement the 3D calculations by providing energy deposition rates in the envelope due to solids accretion. We compare 1D and 3D envelopes and find that masses and gas accretion rates agree within factors of 2, and so do envelope temperatures. The trajectories of passive tracers are used to define the size of 3D envelopes, resulting in radii much smaller than the Hill radius and smaller than the Bondi radius. The moments of inertia and angular momentum of the envelopes are determined and the rotation rates are derived from the rigid-body approximation, resulting in slow bulk rotation. We find that the polar flattening is < ~0.05. The dynamics of the accretion flow is examined by tracking the motion of tracers that move into the envelope. The anisotropy of this flow is characterized in terms of both its origin and impact site at the envelope surface. Gas merges with the envelope preferentially at mid- to high latitudes.

Formation of bodies near the deuterium-burning limit is considered by detailed numerical simulations according to the core-nucleated giant planet accretion scenario. The objects, with heavy-element cores in the range 5-30 Mearth, are assumed to accrete gas up to final masses of 10-15 Jupiter masses (Mjup). After the formation process, which lasts 1-5 Myr and which ends with a 'cold-start', low-entropy configuration, the bodies evolve at constant mass up to an age of several Gyr. Deuterium burning via proton capture is included in the calculation, and we determined the mass, M50, above which more than 50% of the initial deuterium is burned. This often-quoted borderline between giant planets and brown dwarfs is found to depend only slightly on parameters, such as core mass, stellar mass, formation location, solid surface density in the protoplanetary disk, disk viscosity, and dust opacity. The values for M50 fall in the range 11.6-13.6 Mjup, in agreement with previous determinations that do not take the formation process into account. For a given opacity law during the formation process, objects with higher core masses form more quickly. The result is higher entropy in the envelope at the completion of accretion, yielding lower values of M50. For masses above M50, during the deuterium-burning phase, objects expand and increase in luminosity by 1 to 3 orders of magnitude. Evolutionary tracks in the luminosity-versus-time diagram are compared with the observed position of the companion to Beta Pictoris.

The outward migration of a pair of resonant-orbit planets, driven by tidal interactions with a gas-dominated disk, is studied in the context of evolved solar nebula models. The planets' masses, M1 and M2, correspond to those of Jupiter and Saturn. Hydrodynamical calculations in two and three dimensions are used to quantify the migration rates and analyze the conditions under which the outward migration mechanism may operate. The planets are taken to be fully formed after 1e6 and before 3e6 years. The orbital evolution of the planets in an evolving disk is then calculated until the disk's gas is completely dissipated. Orbital locking in the 3:2 mean motion resonance may lead to outward migration under appropriate conditions of disk viscosity and temperature. However, resonance locking does not necessarily result in outward migration. This is the case, for example, if convergent migration leads to locking in the 2:1 mean motion resonance, as post-formation disk conditions seem to suggest. Accretion of gas on the planets may deactivate the outward migration mechanism by raising the mass ratio M2/M1 and/or by reducing the accretion rate toward the star, hence depleting the inner disk. For migrating planets locked in the 3:2 mean motion resonance, there are stalling radii that depend on disk viscosity and on stellar irradiation, when it determines the disk's thermal balance. Planets locked in the 3:2 orbital resonance that start moving outward from within 1-2 AU may reach beyond 5 AU only under favorable conditions. However, within the explored space of disk parameters, only a small fraction - less than a few per cent - of the models predict that the interior planet reaches beyond 4 AU.

Astronomical data are gathered through a very large number of heterogeneous techniques and stored in very diversified and often incompatible data repositories. Moreover in the e-science environment, it is needed to integrate services across distributed, heterogeneous, dynamic "virtual organizations" formed by different resources within a single enterprise and/or external resource sharing and service provider relationships. The DAME/VONeural project, run jointly by the University Federico II, INAF (National Institute of Astrophysics) Astronomical Observatories of Napoli and the California Institute of Technology, aims at creating a single, sustainable, distributed e-infrastructure for data mining and exploration in massive data sets, to be offered to the astronomical (but not only) community as a web application. The framework makes use of distributed computing environments (e.g. S.Co.P.E.) and matches the international IVOA standards and requirements. The integration process is technically challenging due to the need of achieving a specific quality of service when running on top of different native platforms. In these terms, the result of the DAME/VO-Neural project effort will be a service-oriented architecture, obtained by using appropriate standards and incorporating Grid paradigms and restful Web services frameworks where needed, that will have as main target the integration of interdisciplinary distributed systems within and across organizational domains.

Nowadays, many scientific areas share the same need of being able to deal with massive and distributed datasets and to perform on them complex knowledge extraction tasks. This simple consideration is behind the international efforts to build virtual organizations such as, for instance, the Virtual Observatory (VObs). DAME (DAta Mining & Exploration) is an innovative, general purpose, Web-based, VObs compliant, distributed data mining infrastructure specialized in Massive Data Sets exploration with machine learning methods. Initially fine tuned to deal with astronomical data only, DAME has evolved in a general purpose platform which has found applications also in other domains of human endeavor. We present the products and a short outline of a science case, together with a detailed description of main features available in the beta release of the web application now released.

We determine an expression for the Type I planet migration torque involving a locally isothermal disk, with moderate turbulent viscosity (~0.0005 < alpha < ~0.05), based on three-dimensional nonlinear hydrodynamical simulations. The radial gradients (in a dimensionless logarithmic form) of density and temperature are assumed to be constant near the planet. We find that the torque is roughly equally sensitive to the surface density and temperature radial gradients. Both gradients contribute to inward migration when they are negative. Our results indicate that two-dimensional calculations with a smoothed planet potential, used to account for the effects of the third dimension, do not accurately determine the effects of density and temperature gradients on the three-dimensional torque. The results suggest that substantially slowing or stopping planet migration by means of changes in disk opacity or shadowing is difficult and appears unlikely for a disk that is locally isothermal. The scalings of the torque and torque density with planet mass and gas sound speed follow the expectations of linear theory. We also determine an improved formula for the torque density distribution that can be used in one-dimensional long-term evolution studies of planets embedded in locally isothermal disks. This formula can be also applied in the presence of mildly varying radial gradients and of planets that open gaps. We illustrate its use in the case of migrating super-Earths and determine some conditions sufficient for survival.

Gas giant planets play a fundamental role in shaping the orbital architecture of planetary systems and in affecting the delivery of volatile materials to terrestrial planets in the habitable zones. Current theories of gas giant planet formation rely on either of two mechanisms: the core accretion model and the disk instability model. In this chapter, we describe the essential principles upon which these models are built and discuss the successes and limitations of each model in explaining observational data of giant planets orbiting the Sun and other stars.

We present an overview of the formation of Jupiter and its associated circumplanetary disk. Jupiter forms via a combination of planetesimal accretion and gravitational accumulation of gas from the surrounding solar nebula. The formation of the circumjovian gaseous disk, or subnebula, straddles the transitional stage between runaway gas accretion and Jupiter's eventual isolation from the solar disk. This isolation, which effectively signals the termination of Jupiter's accretion, takes place as Jupiter opens a deep gas gap in the solar nebula, or the solar nebula gas dissipates. We describe the conditions for accretion of the Galilean satellites, including the timescales for their formation, and mechanisms for their survival, all within the context of key constraints for satellite formation models. The environment in which the regular satellites form is tied to the timescale for circumplanetary disk dispersal, which depends on the nature and persistence of turbulence. In the case that subnebula turbulence decays as gas inflow wanes, we present a novel mechanism for satellite survival involving gap opening by the largest satellites. On the other hand, assuming that sustained turbulence drives subnebula evolution on a short timescale compared to the satellite formation timescale, we review a model that emphasizes collisional processes to explain satellite observations. We briefly discuss the mechanisms by which solids may be delivered to the circumplanetary disk. However, we expect that planetesimal delivery mechanisms likely provide the bulk of material for satellite accretion.

[Abridged] We model the growth of Jupiter via core nucleated accretion, applying constraints from hydrodynamical processes that result from the disk-planet interaction. We compute the planet's internal structure using a Henyey-type stellar evolution code. The planet's interactions with the protoplanetary disk are calculated using 3-D hydrodynamic simulations. Previous models of Jupiter's growth have taken the radius of the planet to be approximately one Hill sphere radius, Rhill. However, 3-D hydrodynamic simulations show that only gas within 0.25Rhill remains bound to the planet, with the more distant gas eventually participating in the shear flow of the protoplanetary disk. Therefore in our new simulations, the planet's outer boundary is placed at the location where gas has the thermal energy to reach the portion of the flow not bound to the planet. We find that the smaller radius increases the time required for planetary growth by ~5%. Thermal pressure limits the rate at which a planet less than a few dozen times as massive as Earth can accumulate gas from the protoplanetary disk, whereas hydrodynamics regulates the growth rate for more massive planets. Within a moderately viscous disk, the accretion rate peaks when the planet's mass is about equal to the mass of Saturn. In a less viscous disk hydrodynamical limits to accretion are smaller, and the accretion rate peaks at lower mass. To account for disk dissipation, we perform some of our simulations of Jupiter's growth within a disk whose surface gas density decreases on a timescale of 3Myr. According to our simulations, proto-Jupiter's distended and thermally-supported envelope was too small to capture the planet's current retinue of irregular satellites as advocated by Pollack et al. (1979).

We showed that the part of strings could be detected by optical method is only 20% from the total available amount of such objects, therefore the gravitational lensing method has to be "completed" by CMB one. We found the general structure of the CMB anisotropy generated by a cosmic string for simple model of straight string moving with constant velocity. For strings with deficit angle 1-2 arcsec the amplitude of generated anisotropy has to be 15-30 muK (the corresponding string linear density is (G mu) ~ 10^{-7} and energy is GUT one, 10^{15} GeV). To use both radio and optical methods the deficit angle has to be from 0.1 arcsec to 5-6 arcsec. If cosmic string can be detected by optical method, the length of corresponding brightness spot of anisotropy has to be no less than 100 degrees.

S.Co.P.E. is one of the four projects funded by the Italian Government in order to provide Southern Italy with a distributed computing infrastructure for fundamental science. Beside being aimed at building the infrastructure, S.Co.P.E. is also actively pursuing research in several areas among which astrophysics and observational cosmology. We shortly summarize the most significant results obtained in the first two years of the project and related to the development of middleware and Data Mining tools for the Virtual Observatory.

We analyze the orbital and mass evolution of planets that undergo run-away gas accretion by means of 2D and 3D hydrodynamic simulations. The disk torque distribution per unit disk mass as a function of radius provides an important diagnostic for the nature of the disk-planet interactions. We first consider torque distributions for nonmigrating planets of fixed mass and show that there is general agreement with the expectations of resonance theory. We then present results of simulations for mass-gaining, migrating planets. For planets with an initial mass of 5 Earth masses, which are embedded in disks with standard parameters and which undergo run-away gas accretion to one Jupiter mass (Mjup), the torque distributions per unit disk mass are largely unaffected by migration and accretion for a given planet mass. The migration rates for these planets are in agreement with the predictions of the standard theory for planet migration (Type I and Type II migration). The planet mass growth occurs through gas capture within the planet's Bondi radius at lower planet masses, the Hill radius at intermediate planet masses, and through reduced accretion at higher planet masses due to gap formation. During run-away mass growth, a planet migrates inwards by only about 20% in radius before achieving a mass of ~1 Mjup. For the above models, we find no evidence of fast migration driven by coorbital torques, known as Type III migration. We do find evidence of Type III migration for a fixed mass planet of Saturn's mass that is immersed in a cold and massive disk. In this case the planet migration is assumed to begin before gap formation completes. The migration is understood through a model in which the torque is due to an asymmetry in density between trapped gas on the leading side of the planet and ambient gas on the trailing side of the planet.

GRID-launcher-1.0 was built within the VO-Tech framework, as a software interface between the UK-ASTROGRID and a generic GRID infrastructures in order to allow any ASTROGRID user to launch on the GRID computing intensive tasks from the ASTROGRID Workbench or Desktop. Even though of general application, so far the Grid-Launcher has been tested on a few selected softwares (VONeural-MLP, VONeural-SVM, Sextractor and SWARP) and on the SCOPE-GRID.

VO-Neural is the natural evolution of the Astroneural project which was started in 1994 with the aim to implement a suite of neural tools for data mining in astronomical massive data sets. At a difference with its ancestor, which was implemented under Matlab, VO-Neural is written in C++, object oriented, and it is specifically tailored to work in distributed computing architectures. We discuss the current status of implementation of VO-Neural, present an application to the classification of Active Galactic Nuclei, and outline the ongoing work to improve the functionalities of the package.

Vortices in protoplanetary disks can capture solid particles and form planetary cores within shorter timescales than those involved in the standard core-accretion model. We investigate vortex generation in thin unmagnetized protoplanetary disks with an embedded giant planet with planet to star mass ratio $10^{-4}$ and $10^{-3}$. Two-dimensional hydrodynamical simulations of a protoplanetary disk with a planet are performed using two different numerical methods. The results of the non-linear simulations are compared with a time-resolved modal analysis of the azimuthally averaged surface density profiles using linear perturbation theory. Finite-difference methods implemented in polar coordinates generate vortices moving along the gap created by Neptune-mass to Jupiter-mass planets. The modal analysis shows that unstable modes are generated with growth rate of order $0.3 \Omega_K$ for azimuthal numbers m=4,5,6, where $\Omega_K$ is the local Keplerian frequency. Shock-capturing Cartesian-grid codes do not generate very much vorticity around a giant planet in a standard protoplanetary disk. Modal calculations confirm that the obtained radial profiles of density are less susceptible to the growth of linear modes on timescales of several hundreds of orbital periods. Navier-Stokes viscosity of the order $\nu=10^{-5}$ (in units of $a^2 \Omega_p$) is found to have a stabilizing effect and prevents the formation of vortices. This result holds at high resolution runs and using different types of boundary conditions. Giant protoplanets of Neptune-mass to Jupiter-mass can excite the Rossby wave instability and generate vortices in thin disks. The presence of vortices in protoplanetary disks has implications for planet formation, orbital migration, and angular momentum transport in disks.

We discuss the performances of a trigger implemented for the planned neutrino telescope NEMO. This trigger seems capable to discriminate between the signal and the strong background introduced by atmospheric muons and by the beta decay of the K-40 nuclei present in the water. The performances of the trigger, as evaluated on simulated data are analyzed in detail.

We describe the implementation of trigger algorithm specifically tailored on the characteristics of the neutrino telescope NEMO. Extensive testing against realistic simulations shows that, by making use of the uncorrelated nature of the noise produced mainly by the decay of K-40 beta-decay, this trigger is capable to discriminate among different types of muonic events.

We investigate the interaction between a giant planet and a viscous circumstellar disk by means of high-resolution, two-dimensional hydrodynamical simulations. We consider planet masses that range from 1 to 3 Jupiter masses (Mjup) and initial orbital eccentricities that range from 0 to 0.4. We find that a planet can cause eccentricity growth in a disk region adjacent to the planet's orbit, even if the planet's orbit is circular. Disk-planet interactions lead to growth in a planet's orbital eccentricity. The orbital eccentricities of a 2 Mjup and a 3 Mjup planet increase from 0 to 0.11 within about 3000 orbits. Over a similar time period, the orbital eccentricity of a 1 Mjup planet grows from 0 to 0.02. For a case of a 1 Mjup planet with an initial eccentricity of 0.01, the orbital eccentricity grows to 0.09 over 4000 orbits. Radial migration is directed inwards, but slows considerably as a planet's orbit becomes eccentric. If a planet's orbital eccentricity becomes sufficiently large, e > ~0.2, migration can reverse and so be directed outwards. The accretion rate towards a planet depends on both the disk and the planet orbital eccentricity and is pulsed over the orbital period. Planet mass growth rates increase with planet orbital eccentricity. For e~0.2 the mass growth rate of a planet increases by approximately 30% above the value for e=0. For e > ~0.1, most of the accretion within the planet's Roche lobe occurs when the planet is near the apocenter. Similar accretion modulation occurs for flow at the inner disk boundary which represents accretion toward the star.

The increase of computational resources has recently allowed high resolution, three dimensional calculations of planets embedded in gaseous protoplanetary disks. They provide estimates of the planet migration timescale that can be compared to analytical predictions. While these predictions can result in extremely short migration timescales for cores of a few Earth masses, recent numerical calculations have given an unexpected outcome: the torque acting on planets with masses between 5 M_Earth and 20 M_Earth is considerably smaller than the analytic, linear estimate. These findings motivated the present work, which investigates existence and origin of this discrepancy or ``offset'', as we shall call it, by means of two and three dimensional numerical calculations. We show that the offset is indeed physical and arises from the coorbital corotation torque, since (i) it scales with the disk vortensity gradient, (ii) its asymptotic value depends on the disk viscosity, (iii) it is associated to an excess of the horseshoe zone width. We show that the offset corresponds to the onset of non-linearities of the flow around the planet, which alter the streamline topology as the planet mass increases: at low mass the flow non-linearities are confined to the planet's Bondi sphere whereas at larger mass the streamlines display a classical picture reminiscent of the restricted three body problem, with a prograde circumplanetary disk inside a ``Roche lobe''. This behavior is of particular importance for the sub-critical solid cores (M <~ 15 M_Earth) in thin (H/r <~0.06) protoplanetary disks. Their migration could be significantly slowed down, or reversed, in disks with shallow surface density profiles.

We perform numerical simulations of a disc-planet system using various grid-based and smoothed particle hydrodynamics (SPH) codes. The tests are run for a simple setup where Jupiter and Neptune mass planets on a circular orbit open a gap in a protoplanetary disc during a few hundred orbital periods. We compare the surface density contours, potential vorticity and smoothed radial profiles at several times. The disc mass and gravitational torque time evolution are analyzed with high temporal resolution. There is overall consistency between the codes. The density profiles agree within about 5% for the Eulerian simulations while the SPH results predict the correct shape of the gap although have less resolution in the low density regions and weaker planetary wakes. The disc masses after 200 orbital periods agree within 10%. The spread is larger in the tidal torques acting on the planet which agree within a factor 2 at the end of the simulation. In the Neptune case the dispersion in the torques is greater than for Jupiter, possibly owing to the contribution from the not completely cleared region close to the planet.

We analyze the gas accretion flow through a planet-produced gap in a protoplanetary disk. We adopt the alpha disk model and ignore effects of planetary migration. We develop a semi-analytic, one-dimensional model that accounts for the effects of the planet as a mass sink and also carry out two-dimensional hydrodynamical simulations of a planet embedded in a disk. The predictions of the mass flow rate through the gap based on the semi-analytic model generally agree with the hydrodynamical simulations at the 25% level. Through these models, we are able to explore steady state disk structures and over large spatial ranges. The presence of an accreting Jupiter-mass planet significantly lowers the density of the disk within a region of several times the planet's orbital radius. The mass flow rate across the gap (and onto the central star) is typically 10% to 25% of the mass accretion rate outside the orbit of the planet, for planet-to-star mass ratios that range from 5e-5 to 1e-3.

We investigate the migration rates of high-mass protoplanets embedded in accretion discs via two and three-dimensional hydrodynamical simulations. The simulations follow the planet's radial motion and employ a nested-grid code that allows for high resolution close to the planet. We concentrate on the possible role of the coorbital torques in affecting migration rates. We analyse two cases: (a) a Jupiter-mass planet in a low-mass disc and (b) a Saturn-mass planet in a high-mass disc. Planet migration in case (b) is much more susceptible to coorbital torques than in case (a). We find that the coorbital torques in both cases do not depend sensitively on whether the planet is allowed to migrate through the disc or is held on a fixed orbit. We also examine the dependence of the planet's migration rate on the numerical resolution near the planet. For case (a), numerical convergence is relatively easy to obtain, even when including torques arising from deep within the planet's Hill sphere. The migration rate in this case is numerically on order of the Type II migration rate and much smaller than the Type I rate, if the disc has 0.01 solar-masses inside 26 AU. Torques from within the Hill sphere provide a substantial opposing contribution to the migration rate. In case (b), the gas mass within the Hill sphere is larger than the planet's mass and convergence is more difficult to obtain. If the torques within the Hill sphere are ignored, convergence is more easily achieved but the migration rate is artificially large. At our highest resolution, the migration rate for case (b) is much less than the Type I rate, but somewhat larger than the Type II rate.

We investigate the possibility to detect giant planets that are still embedded in young circumstellar disks. Based on models with different stellar, planetary, and disk masses, and different radial positions of the planet we analyze the resulting submillimeter appearance of these systems. We find that the influence of the planet on the spectral energy distribution could not be distinguished from that of other disk parameters. However, dust reemission images of the disks show that the hot region in the proximity of a young planet, along with the gap, could indeed be detected and mapped with the Atacama Large Millimeter Array in the case of nearby circumstellar disks (d<100pc) in approximate face-on orientation.

With a series of numerical simulations, we analyze the thermo-hydrodynamical evolution of circumstellar disks containing Jupiter-size protoplanets. In the framework of the two-dimensional approximation, we consider an energy equation that includes viscous heating and radiative effects in a simplified, yet consistent form. Multiple nested grids are used in order to study both global and local features around the planet. By means of different viscosity prescriptions, we investigate various temperature regimes. A planetary mass range from 0.1 to 1 Mj is examined. Computations show that gap formation is a general property which affects density, pressure, temperature, optical thickness, and radiated flux distributions. However, it remains a prominent feature only when the kinematic viscosity is on the order of 10^(15) cm^2/s or lower. Around accreting planets, a circumplanetary disk forms that has a surface density profile decaying exponentially with the distance and whose mass is 5-6 orders of magnitudes smaller than Jupiter's mass. Circumplanetary disk temperature profiles decline roughly as the inverse of the distance from the planet. Temperatures range from some 10 to ~1000 K. Planetary accretion and migration rates depend on the viscosity regime, with discrepancies within an order of magnitude. Estimates of growth and migration time scales inferred by these models are on the same orders of magnitude as those previously obtained with locally isothermal simulations.

We investigate the evolution of protoplanets with different masses embedded in an accretion disk, via global fully three-dimensional hydrodynamical simulations. We consider a range of planetary masses extending from one and a half Earth's masses up to one Jupiter's mass, and we take into account physically realistic gravitational potentials of forming planets. In order to calculate accurately the gravitational torques exerted by disk material and to investigate the accretion process onto the planet, the flow dynamics has to be thoroughly resolved on long as well as short length scales. We achieve this strict resolution requirement by applying a nested-grid refinement technique which allows to greatly enhance the local resolution. Our results from altogether 51 simulations show that for large planetary masses, approximately above a tenth of the Jupiter's mass, migration rates are relatively constant, as expected in type II migration regime and in good agreement with previous two-dimensional calculations. In a range between seven and fifteen Earth's masses, we find a dependency of the migration speed on the planetary mass that yields time scales considerably longer than those predicted by linear analytical theories. This property may be important in determining the overall orbital evolution of protoplanets. The growth time scale is minimum around twenty Earth-masses, but it rapidly increases for both smaller and larger mass values. Significant differences between two- and three-dimensional calculations are found in particular for objects with masses smaller than ten Earth-masses. We also derive an analytical approximation for the numerically computed mass growth rates.

Planet evolution is tightly connected to the dynamics of both distant and close disk material. Hence, an appropriate description of disk-planet interaction requires global and high resolution computations, which we accomplish by applying a Nested-Grid method. Through simulations in two and three dimensions, we investigate how migration and accretion are affected by long and short range interactions. For small mass objects, 3D models provide longer growth and migration time scales than 2D ones do, whereas time lengths are comparable for large mass planets.

We study the evolution of embedded protoplanets in a protostellar disk using very high resolution nested-grid computations. This method allows us to perform global simulations of planets orbiting in disks and, at the same time, to resolve in detail the dynamics of the flow inside the Roche lobe of the planet. The primary interest of this work lies in the analysis of the gravitational torque balance acting on the planet. For this purpose we study planets of different masses, ranging from one Earth-mass up to one Jupiter-mass, assuming typical parameters of the protostellar disk. The high resolution of the method allows a precise determination of the mass flow onto the planet and the resulting torques. The obtained migration time scales are in the range from few times 10^4 years, for intermediate mass planets, to 10^6 years, for very low and high mass planets. Typical growth time scales depend strongly on the planetary mass, ranging from a few hundred years, in the case of Earth-type planets, to several ten thousand years, in the case of Jupiter-type planets.