We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 muJy in L and 0.1 muJy in N for the flux, and 2 microarcsec for the angular diameter. We build 4 lists of calibrator candidates for the L- and N-bands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1 621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1% accuracy.

We determine the physical parameters of the outer atmosphere of a sample of eight evolved stars, including the red supergiant {\alpha} Scorpii, the red giant branch stars {\alpha} Bootis and {\gamma} Crucis, the K giant {\lambda} Velorum, the normal M giants BK Virginis and SW Virginis, and the Mira star W Hydrae (in two different luminosity phases) by spatially resolving the stars in the individual carbon monoxide (CO) first overtone lines. We used the Astronomical Multi-BEam combineR (AMBER) instrument at the Very Large Telescope Interferometer (VLTI), in high-resolution mode (${\lambda}/{\Delta}{\lambda} {\approx} 12000$) between 2.28 and 2.31 ${\mu}m$ in the K band.The maximal angular resolution is 10 mas, obtained using a triplet telescope configuration, with baselines from 7 to 48 m. By using a numerical model of a molecular atmosphere in a spherical shells (MOLsphere), called PAMPERO (an acronym for the "Physical Approach of Molecular Photospheric Ejection at high-angular-Resolution for evOlved stars"), we add multiple extended CO layers above the photospheric MARCS model at an adequate spatial resolution. We use the differential visibilities and the spectrum to estimate the size ($R$) of the CO MOLsphere, its column density (${N_{CO}}$) and temperature (${T_{mol}}$) distributions along the stellar radius. The combining of the ${\chi^2}$ minimization and a fine grid approach for uncertainty analysis leads to reasonable ${N_{CO}}$ and ${T_{mol}}$ distributions along the stellar radius of the MOLsphere.

We present in this paper the general formalism and data processing steps used in the MATISSE data reduction software, as it has been developed by the MATISSE consortium. The MATISSE instrument is the mid-infrared new generation interferometric instrument of the Very Large Telescope Interferometer (VLTI). It is a 2-in-1 instrument with 2 cryostats and 2 detectors: one 2k x 2k Rockwell Hawaii 2RG detector for L\&M-bands, and one 1k x 1k Raytheon Aquarius detector for N-band, both read at high framerates, up to 30 frames per second. MATISSE is undergoing its first tests in laboratory today.

We analyse interferometric data obtained for Regulus with AMBER (Astronomical Multi- BEam combineR) at high spectral resolution ($\lambda/\delta\lambda \approx 12000$) across the Br$\gamma$ spectral line. The study of the photocentre displacement allows us to constrain a large number of stellar parameters -- equatorial radius $R_{\rm eq}$, equatorial velocity $V_{\rm eq}$, inclination $i$, rotation-axis position angle $PA_{\rm rot}$, and flattening -- with an estimation of gravity-darkening coefficient $\beta$ using previously published theoretical results. We use the Simulation Code of Interferometric-observations for ROtators and CirCumstellar Objects (SCIROCCO), a semi-analytical algorithm dedicated to fast rotators. We chose Regulus because it is a very well-known edge-on star, for which an alternative approach is needed to check the previously published results. Our analysis showed that a significant degeneracy of solution is present. By confronting the results obtained by differential interferometry with those obtained by conventional long-base interferometry, we obtain similar results (within the uncertainties), thereby validating our approach, where $V_{eq}$ and $i$ are found separately. From the photocentre displacement, we can independently deduce $PA_{rot}$. We use two minimization methods to restrict observed stellar parameters via a fast rotator model: a non-stochastic method ($\chi^2$ fit) and a stochastic one (Markov Chain Monte Carlo method), in order to check whether the correct global minimum is achieved particularly with respect to the degeneracies of the gravity darkening parameter $\beta$, where we demonstrate, using a quantitative analysis of parameters, that the estimate of $\beta$ is easier for stars with an inclination angle of around $45^\circ$.

The rapidly rotating primary component of Regulus A system has been observed, for the first time, using the technique of differential interferometry at high spectral resolution. The observations have been performed across the Br$_\gamma$ spectral line with the VLTI/AMBER focal instrument in high spectral resolution mode (R $\approx$ 12000) at $\approx$ 80-130m (projected on the sky) Auxiliary Telescopes triplet baseline configurations. We confirm, within the uncertainties, the results previously obtained using the techniques of classical long-baseline interferometry, although the question of anomalous gravity darkening remains open for the future study.

MATISSE represents a great opportunity to image the environment around massive and evolved stars. This will allow one to put constraints on the circumstellar structure, on the mass ejection of dust and its reorganization , and on the dust-nature and formation processes. MATISSE measurements will often be pivotal for the understanding of large multiwavelength datasets on the same targets collected through many high-angular resolution facilities at ESO like sub-millimeter interferometry (ALMA), near-infrared adaptive optics (NACO, SPHERE), interferometry (PIONIER, GRAVITY), spectroscopy (CRIRES), and mid-infrared imaging (VISIR). Among main sequence and evolved stars, several cases of interest have been identified that we describe in this paper.

Context. The Mass loss of Evolved StarS (MESS) sample observed with PACS on board the Herschel Space Observatory revealed that several asymptotic giant branch (AGB) stars are surrounded by an asymmetric circumstellar envelope (CSE) whose morphology is most likely caused by the interaction with a stellar companion. The evolution of AGB stars in binary systems plays a crucial role in understanding the formation of asymmetries in planetary nebul{\ae} (PNe), but at present, only a handful of cases are known where the interaction of a companion with the stellar AGB wind is observed. Aims. We probe the environment of the very evolved AGB star $\pi^1$ Gruis on large and small scales to identify the triggers of the observed asymmetries. Methods. Observations made with Herschel/PACS at 70 $\mu$m and 160 $\mu$m picture the large-scale environment of $\pi^1$ Gru. The close surroundings of the star are probed by interferometric observations from the VLTI/AMBER archive. An analysis of the proper motion data of Hipparcos and Tycho-2 together with the Hipparcos Intermediate Astrometric Data help identify the possible cause for the observed asymmetry. Results. The Herschel/PACS images of $\pi^1$ Gru show an elliptical CSE whose properties agree with those derived from a CO map published in the literature. In addition, an arc east of the star is visible at a distance of $38^{\prime\prime}$ from the primary. This arc is most likely part of an Archimedean spiral caused by an already known G0V companion that is orbiting the primary at a projected distance of 460 au with a period of more than 6200 yr. However, the presence of the elliptical CSE, proper motion variations, and geometric modelling of the VLTI/AMBER observations point towards a third component in the system, with an orbital period shorter than 10 yr, orbiting much closer to the primary than the G0V star.

Thanks to their large angular dimension and brightness, red giants and supergiants are privileged targets for optical long-baseline interferometers. Sixteen red giants and supergiants have been observed with the VLTI/AMBER facility over a two-years period, at medium spectral resolution (R=1500) in the K band. The limb-darkened angular diameters are derived from fits of stellar atmospheric models on the visibility and the triple product data. The angular diameters do not show any significant temporal variation, except for one target: TX Psc, which shows a variation of 4% using visibility data. For the eight targets previously measured by Long-Baseline Interferometry (LBI) in the same spectral range, the difference between our diameters and the literature values is less than 5%, except for TX Psc, which shows a difference of 11%. For the 8 other targets, the present angular diameters are the first measured from LBI. Angular diameters are then used to determine several fundamental stellar parameters, and to locate these targets in the Hertzsprung-Russell Diagram (HRD). Except for the enigmatic Tc-poor low-mass carbon star W Ori, the location of Tc-rich stars in the HRD matches remarkably well the thermally-pulsating AGB, as it is predicted by the stellar-evolution models. For pulsating stars with periods available, we compute the pulsation constant and locate the stars along the various sequences in the Period -- Luminosity diagram. We confirm the increase in mass along the pulsation sequences, as predicted by the theory, except for W Ori which, despite being less massive, appears to have a longer period than T Cet along the first-overtone sequence.

Extracting stellar fundamental parameters from SPectro-Interferometric (SPI) data requires reliable estimates of observables and with robust uncertainties (visibility, triple product, phase closure). A number of fine calibration procedures is necessary throughout the reduction process. Testing departures from centro-symmetry of brightness distributions is a useful complement. Developing a set of automatic routines, called SPIDAST (made available to the community) to reduce, calibrate and interpret raw data sets of instantaneous spectro-interferograms at the spectral channel level, we complement (and in some respects improve) the ones contained in the amdlib Data Reduction Software. Our new software SPIDAST is designed to work in an automatic mode, free from subjective choices, while being versatile enough to suit various processing strategies. SPIDAST performs the following automated operations: weighting of non-aberrant SPI data (visibility, triple product), fine spectral calibration (sub-pixel level), accurate and robust determinations of stellar diameters for calibrator sources (and their uncertainties as well), correction for the degradations of the interferometer response in visibility and triple product, calculation of the Centro-Symmetry Parameter (CSP) from the calibrated triple product, fit of parametric chromatic models on SPI observables, to extract model parameters. SPIDAST is currently applied to the scientific study of 18 cool giant and supergiant stars, observed with the VLTI/AMBER facility at medium resolution in the K band. Because part of their calibrators have no diameter in the current catalogs, SPIDAST provides new determinations of the angular diameters of all calibrators. Comparison of SPIDAST final calibrated observables with amdlib determinations shows good agreement, under good and poor seeing conditions.

We study the close circumstellar environment of the nearby S-type star Pi^1 Gruis using high spatial-resolution, mid-infrared observations from the ESO/VLTI. Spectra and visibilities were obtained with the MIDI interferometer on the VLT Auxiliary Telescopes. The cool M5III giant Beta Gruis was used as bright primary calibrator, and a dedicated spectro-interferometric study was undertaken to determine its angular diameter accurately. The MIDI measurements were fitted with the 1D numerical radiative transfer code DUSTY to determine the dust shell parameters of Pi^1 Gruis. Taking into account the low spatial extension of the model in the 8-9 $\mu$m spectral band for the smallest projected baselines, we consider the possibility of a supplementary molecular shell. The MIDI visibility and phase data are mostly dominated by the spherical 21 mas (694 Rsol) central star, while the extended dusty environment is over-resolved even with the shortest baselines. No obvious departure from spherical symmetry is found on the milliarcsecond scale. The spectro-interferometric observations are well-fitted by an optically thin (tau(dust)<0.01 in the band) dust shell that is located at about 14 stellar radii with a typical temperature of 700 K and composed of 70% silicate and 30% of amorphous alumina grains. An optically thin (tau(mol)<0.1 in the N band) H2O+SiO molecular shell extending from the photosphere of the star up to 4.4 stellar radii with a typical temperature of 1000 K is added to the model to improve the fit in the 8-9 $\mu$m spectral band. We discuss the probable binary origin of asymmetries as revealed by millimetric observations.

We present high spatial resolution observations of the mid-infrared core of the dusty symbiotic system HM Sge. The MIDI interferometer was used with the VLT UTs and ATs providing baselines oriented from PA=42&deg; to 105&deg;. The MIDI visibilities are compared with the ones predicted in the frame of various spherical dust shells published in the literature involving single or double dusty shells. The mid-IR environment is unresolved by a 8m telescope and the MIDI spectrum exhibits a level similar to the ISO spectra recorded 10 yr ago. The estimated Gaussian HWHM of the shell of 12AU in the 8-9$\mu$m range, and 18AU in the 11-12$\mu$m range, are much smaller than the angular separation between the Mira and the White Dwarf of 60AU. The discrepancies between the HWHM at different angle orientations suggest an increasing level of asymmetry from 13 to 8$\mu$m. The observations are well fitted by the densest and smallest model published in the literature based on the ISO data, although such a model does not account for the variations of near-IR photometry due to the Mira pulsation cycle suggesting a much smaller optical thickness. These observations also discard the two shells models, developed to take into account the effect of the WD illumination onto the dusty wind of the Mira. These observations show that a high rate of dust formation is occurring in the vicinity of the Mira which seems to be not highly perturbed by the hot companion.

In long baseline interferometry, the raw fringe contrast must be calibrated to obtain the true visibility and then those observables that can be interpreted in terms of astrophysical parameters. The selection of suitable calibration stars is crucial for obtaining the ultimate precision of interferometric instruments like the VLTI. We have developed software SearchCal that builds an evolutive catalog of stars suitable as calibrators within any given user-defined angular distance and magnitude around the scientific target. We present the first version of SearchCal dedicated to the bright-object case V<=10; K<=5). Star catalogs available at the CDS are consulted via web requests. They provide all the useful information for selecting of calibrators. Missing photometries are computed with an accuracy of 0.1 mag and the missing angular diameters are calculated with a precision better than 10%. For each star the squared visibility is computed by taking the wavelength and the maximum baseline of the foreseen observation into account.} SearchCal is integrated into ASPRO, the interferometric observing preparation software developed by the JMMC, available at the address: http://mariotti.fr.