We have developed Water Vapour Radiometers (WVRs) for the Australia Telescope Compact Array (ATCA) that are capable of determining signal path length fluctuations by virtue of measuring small temperature fluctuations in the atmosphere using the 22.2 GHz water vapour line for each of the six antennae. By measuring the line of sight variations of the water vapour, the induced path excess and thus the phase delay can be estimated and corrections can then be applied during data reduction. This reduces decorrelation of the source signal. We demonstrate how this recovers the telescope's efficiency as well as how this improves the telescope's ability to use longer baselines at higher frequencies, thereby resulting in higher spatial resolution. A description of the WVR hardware design, their calibration and water vapour retrieval mechanism is given.

Path length changes through the atmosphere cause significant errors for astronomical radio interferometry at high frequencies (e.g. 100 GHz). Path length differences typically give rise to a differential excess path of 1mm for antennas separated by 1km, and have fluctuation time scales of greater than 10 seconds. To measure these fluctuations, we are building a four-channel radiometer centred on the 22 GHz water line. By sensing the water vapour emission, the excess path can be deduced and corrected. Multiple channels give us robustness against various systematic errors, but gain stability of the radiometer of 1 pair in 10^4 is still required.