Normalized to: Crane, B.
[1]
oai:arXiv.org:1804.05645 [pdf] - 1810141
PILOT balloon-borne experiment in-flight performance
Mangilli, A.;
Foënard, G.;
Aumont, J.;
Hughes, A.;
Mot, B.;
Bernard, J-Ph.;
Lacourt, A.;
Ristorcelli, I.;
Longval, Y.;
Ade, P.;
André, Y.;
Bautista, L.;
deBernardis, P.;
Boulade, O.;
Bousqet, F.;
Bouzit, M.;
Buttice, V.;
Charra, M.;
Crane, B.;
Doumayrou, E.;
Dubois, J. P.;
Engel, C.;
Griffin, M.;
Grabarnik, S.;
Hargrave, P.;
Laureijs, R.;
Leriche, B.;
Maestre, S.;
Maffei, B.;
Marty, C.;
Marty, W.;
Masi, S.;
Misawa, R.;
Montel, J.;
Montier, L.;
Narbonne, J.;
Pajot, F.;
Pérot, E.;
Pimentao, J.;
Pisano, G.;
Ponthieu, N.;
Rodriguez, L.;
Roudil, G.;
Salatino, M.;
Savini, G.;
Simonella, O.;
Saccoccio, M.;
Stever, S.;
Tauber, J.;
Tibbs, C.;
Tucker, C.
Submitted: 2018-04-16, last modified: 2019-01-07
The Polarized Instrument for Long-wavelength Observation of the Tenuous
interstellar medium (PILOT) is a balloon-borne experiment aiming at measuring
the polarized emission of thermal dust at a wavelength of 240 mm (1.2 THz). A
first PILOT flight (flight#1) of the experiment took place from Timmins,
Ontario, Canada, in September 2015 and a second flight (flight#2) took place
from Alice Springs, Australia in april 2017. In this paper, we present the
inflight performance of the instrument during these two flights. We concentrate
on performances during flight#2, but allude to flight#1 performances if
significantly different. We first present a short description of the instrument
and the flights. We determine the time constants of our detectors combining
inflight information from the signal decay following high energy particle
impacts (glitches) and of our internal calibration source. We use these time
constants to deconvolve the data timelines and analyse the optical quality of
the instrument as measured on planets. We then analyse the structure and
polarization of the instrumental background. We measure the detector response
flat field and its time variations using the signal from the residual
atmosphere and of our internal calibration source. Finally, we analyze the
detector noise spectral and temporal properties. The in-flight performances are
found to be satisfactory and globally in line with expectations from ground
calibrations. We conclude by assessing the expected in-flight sensitivity of
the instrument in light of the above in-flight performances.
[2]
oai:arXiv.org:1410.5760 [pdf] - 885266
PILOT: a balloon-borne experiment to measure the polarized FIR emission
of dust grains in the interstellar medium
Misawa, R.;
Bernard, J-Ph.;
Ade, P.;
Andre, Y.;
deBernardis, P.;
Bouzit, M.;
Charra, M.;
Crane, B.;
Dubois, J. P.;
Engel, C.;
Griffin, M.;
Hargrave, P.;
Leriche, B.;
Longval, Y.;
Maes, S.;
Marty, C.;
Marty, W.;
Masi, S.;
Mot, B.;
Narbonne, J.;
Pajot, F.;
Pisano, G.;
Ponthieu, N.;
Ristorcelli, I.;
Rodriguez, L.;
Roudil, G.;
Salatino, M.;
Savini, G.;
Tucker, C.
Submitted: 2014-10-13
Future cosmology space missions will concentrate on measuring the
polarization of the Cosmic Microwave Background, which potentially carries
invaluable information about the earliest phases of the evolution of our
universe. Such ambitious projects will ultimately be limited by the sensitivity
of the instrument and by the accuracy at which polarized foreground emission
from our own Galaxy can be subtracted out. We present the PILOT balloon project
which will aim at characterizing one of these foreground sources, the
polarization of the dust continuum emission in the diffuse interstellar medium.
The PILOT experiment will also constitute a test-bed for using multiplexed
bolometer arrays for polarization measurements. We present the results of
ground tests obtained just before the first flight of the instrument.
