Astrometry is one of the main science case which drives the requirements of the next multiconjugate adaptive optics (MCAO) systems for future extremely large telescopes. The small diffraction limited point-spread function (PSF) and the high Signal-to-Noise Ratio (SNR) of these instruments, promise astrometric precision at the level of micro-arcseconds. However, optical distortions have to be as low as possible to achieve the high demanding astrometry requirements. In addition to static distortions, the opto-mechanical instabilities cause astrometric errors that can be major contributors to the astrometry error budget. The present article describes the analysis, at design level, of the effects of opto-mechanical instabilities when coupled with optical surface irregularities due to the manufacturing process. We analyse the notable example of the Multi-conjugate Adaptive Optics RelaY (MAORY) for the extremely large telescope (ELT). Ray-tracing simulations combined with a Monte Carlo approach are used to estimate the geometrical structure and magnitude of field distortion resulting from the optical design. We consider the effects of distortion on the MCAO correction showing that it is possible achieve the micro-arcseconds astrometric precision once corresponding accuracy is obtained by both optical design and manufacturing. We predict that for single-epoch observations, an astrometric error below 50$\mu$as can be achieved for exposure times up to 2 min, provided about 100 stars are available to remove fifth-order distortions. Such performance could be reproducible for multi-epoch observations despite the time-variable distortion induced by instrument instabilities.

MICADO is the Multi-AO Imaging Camera for Deep Observations, and it will be one of the first light instruments of the Extremely Large Telescope (ELT). Doing high precision multi-object differential astrometry behind ELT is particularly effective given the increased flux and small diffraction limit. Thanks to its robust design with fixed mirrors and a cryogenic environment, MICADO aims to provide 50 $\mu$as absolute differential astrometry (measure star-to-star distances in absolute $\mu$as units) over a 53" FoV in the range 1.2-2.5 $\mu$m. Tackling high precision astrometry over large FoV requires Multi Conjugate Adaptive Optics (MCAO) and an accurate distortion calibration. The MICADO control scheme relies on the separate calibration of the ELT, MAORY and MICADO systematics and distortions, to ensure the best disentanglement and correction of all the contributions. From a system perspective, we are developing an astrometric error budget supported by optical simulations to assess the impact of the main astrometric errors induced by the telescope and its optical tolerances, the MCAO distortions and the opto-mechanical errors between internal optics of ELT, MAORY and MICADO. The development of an overall astrometric error budget will pave the road to an efficient calibration strategy complementing the design of the MICADO calibration unit. At the focus of this work are a number of opto-mechanical error terms which have particular relevance for MICADO astrometry applications, and interface to the MCAO design.

We report on a superdense star-forming region with an effective radius (R_e) smaller than 13 pc identified at z=6.143 and showing a star-formation rate density \Sigma_SFR~1000 Msun/yr/kpc2 (or conservatively >300 Msun/yr/kpc2). Such a dense region is detected with S/N>40 hosted by a dwarf extending over 440 pc, dubbed D1 (Vanzella et al. 2017b). D1 is magnified by a factor 17.4+/-5.0 behind the Hubble Frontier Field galaxy cluster MACS~J0416 and elongated tangentially by a factor 13.2+/-4.0 (including the systematic errors). The lens model accurately reproduces the positions of the confirmed multiple images with a r.m.s. of 0.35", and the tangential stretch is well depicted by a giant multiply-imaged Lya arc. D1 is part of an interacting star-forming complex extending over 800 pc. The SED-fitting, the very blue ultraviolet slope (\beta ~ -2.5, F(\lambda) ~ \lambda^\beta) and the prominent Lya emission of the stellar complex imply that very young (< 10-100 Myr), moderately dust-attenuated (E(B-V)<0.15) stellar populations are present and organised in dense subcomponents. We argue that D1 (with a stellar mass of 2 x 10^7 Msun) might contain a young massive star cluster of M < 10^6 Msun and Muv~-15.6 (or m_uv=31.1), confined within a region of 13 pc, and not dissimilar from some local super star clusters (SSCs). The ultraviolet appearance of D1 is also consistent with a simulated local dwarf hosting a SSC placed at z=6 and lensed back to the observer. This compact system fits into some popular globular cluster formation scenarios. We show that future high spatial resolution imaging (e.g., E-ELT/MAORY-MICADO and VLT/MAVIS) will allow us to spatially resolve light profiles of 2-8 pc.

The Multiconjugate Adaptive Optics RelaY (MAORY) is and Adaptive Optics module to be mounted on the ESO European-Extremely Large Telescope (E-ELT). It is a hybrid Natural and Laser Guide System that will perform the correction of the atmospheric turbulence volume above the telescope feeding the Multi-AO Imaging Camera for Deep Observations Near Infrared spectro-imager (MICADO). We developed an end-to-end Monte- Carlo adaptive optics simulation tool to investigate the performance of a the MAORY and the calibration, acquisition, operation strategies. MAORY will implement Multiconjugate Adaptive Optics combining Laser Guide Stars (LGS) and Natural Guide Stars (NGS) measurements. The simulation tool implements the various aspect of the MAORY in an end to end fashion. The code has been developed using IDL and uses libraries in C++ and CUDA for efficiency improvements. Here we recall the code architecture, we describe the modeled instrument components and the control strategies implemented in the code.

In 2007, a companion with planetary mass was found around the pulsating subdwarf B star V391 Pegasi with the timing method, indicating that a previously undiscovered population of substellar companions to apparently single subdwarf B stars might exist. Following this serendipitous discovery, the EXOTIME (http://www.na.astro.it/~silvotti/exotime/) monitoring program has been set up to follow the pulsations of a number of selected rapidly pulsating subdwarf B stars on time-scales of several years with two immediate observational goals: 1) determine Pdot of the pulsational periods P 2) search for signatures of substellar companions in O-C residuals due to periodic light travel time variations, which would be tracking the central star's companion-induced wobble around the center of mass. These sets of data should therefore at the same time: on the one hand be useful to provide extra constraints for classical asteroseismological exercises from the Pdot (comparison with "local" evolutionary models), and on the other hand allow to investigate the preceding evolution of a target in terms of possible "binary" evolution by extending the otherwise unsuccessful search for companions to potentially very low masses. While timing pulsations may be an observationally expensive method to search for companions, it samples a different range of orbital parameters, inaccessible through orbital photometric effects or the radial velocity method: the latter favours massive close-in companions, whereas the timing method becomes increasingly more sensitive towards wider separations. In this paper we report on the status of the on-going observations and coherence analysis for two of the currently five targets, revealing very well-behaved pulsational characteristics in HS 0444+0458, while showing HS 0702+6043 to be more complex than previously thought.

The VLT Survey Telescope (VST) is a 2.6m aperture, wide field, UV to I facility, to be installed at the European Southern Observatory (ESO) on the Cerro Paranal Chile. VST was primarily intended to complement the observing capabilities of VLT with wide-angle imaging for detecting and pre-characterising sources for further observations with the VLT.

The VST (VLT Survey Telescope) is a 2.6 m class Alt-Az telescope to be installed at Mount Paranal in the Atacama desert, Chile, in the European Southern Observatory (ESO) site. The VST is a wide-field imaging facility planned to supply databases for the ESO Very Large Telescope (VLT) science and carry out stand-alone observations in the UV to I spectral range. This paper will focus on the distributed control system of active optics based on CAN bus and PIC microcontrollers. Both axial and radial pads of the primary mirror will be equipped by astatic lever supports controlled by microcontroller units. The same CAN bus + microcontroller boards approach will be used for the temperature acquisition modules.

We present the concept and preliminary design of the Galileo OH Subtracted Spectrograph [GOHSS], a multifibre NIR spectrograph for faint objects. The instrument represents a collaboration between the Institute of Astronomy, Cambridge and the Observatories of Naples and Rome and will be a second-light instrument for the 3.6m Galileo telescope located on La Palma. The NIR spectrograph accomplishes OH night-sky suppression in a different way from the hardware solution used by both OHS (Maihara etal) and COHSI (Piche' et al). GOHSS provides a multiechelle design with software subtraction capable of yielding ~28 spectra in J+H bands at a spectral resolution R~3000. Such a resolution is the minimum necessary to reduce the impact of atmospheric OH lines.