We have studied the high-mass star-forming complex NGC 6334 with ALMA in the continuum emission at a frequency of 87.6 GHz, achieving a spatial resolution of 1300 au. Detecting 142 compact sources distributed over the whole observed area, we then used machine learning algorithms to group the compact cores in different clusters. A total of four main clusters were identified: NGC 6334-E, NGC 6334-I, NGC 6334-I(N) and NGC 6334-I(NW). The typical separations between cluster members (4000-12000 au) together with the core masses (0.2-100 $M_{\odot}$) are in agreement with turbulent fragmentation at scales of 0.1 pc. We find that the CMFs (core mass functions) show an excess of massive cores compared to the IMF. Typical uncertainties in temperature or unresolved multiplicity may mimic the observed excess of massive cores. Evidence of mass segregation in NGC 6334-I and NGC 6334-I(N), with the most massive cores located closer to the center, was found. Correlations between the physical properties of the clusters and their evolutionary stage were searched for, and found to show a larger separation between cores in the more evolved clusters, favouring the role of gas expulsion and stellar ejection over time. From these results, we suggest that NGC 6334-I(N) was primordially segregated, while NGC 6334-I may have become mass-segregated over time due to dynamical effects. Finally, the lack of massive cores in the most evolved cluster suggests that the gas reservoir may be already exhausted, while the less evolved clusters still have access to a larger gas mass reservoir. In general, the fragmentation in NGC 6334 at large scales (about 1 pc) is governed by turbulent pressure, while at smaller scales (a few hundred au), thermal pressure regulates the fragmentation process.

We have analysed the Herschel and SCUBA-2 dust continuum observations of the main filament in the Taurus L1495 star forming region, using the Bayesian fitting procedure PPMAP. (i) If we construct an average profile along the whole length of the filament, it has fwhm $\simeq 0.087\pm 0.003\,{\rm pc};\;$, but the closeness to previous estimates is coincidental. (ii) If we analyse small local sections of the filament, the column-density profile approximates well to the form predicted for hydrostatic equilibrium of an isothermal cylinder. (iii) The ability of PPMAP to distinguish dust emitting at different temperatures, and thereby to discriminate between the warm outer layers of the filament and the cold inner layers near the spine, leads to a significant reduction in the surface-density, $\varSigma$, and hence in the line-density, $\mu$. If we adopt the canonical value for the critical line-density at a gas-kinetic temperature of $10\,{\rm K}$, $\mu_{_{\rm CRIT}}\simeq 16\,{\rm M_{_\odot}\,pc^{-1}}$, the filament is on average trans-critical, with ${\bar\mu}\sim \mu_{_{\rm CRIT}};\;$ local sections where $\mu >\mu_{_{\rm CRIT}}$ tend to lie close to pre-stellar cores. (iv) The ability of PPMAP to distinguish different types of dust, i.e. dust characterised by different values of the emissivity index, $\beta$, reveals that the dust in the filament has a lower emissivity index, $\beta\leq1.5$, than the dust outside the filament, $\beta\geq 1.7$, implying that the physical conditions in the filament have effected a change in the properties of the dust.

Theories suggest that filament fragmentation should occur on a characteristic fragmentation length-scale. This fragmentation length-scale can be related to filament properties, such as the width and the dynamical state of the filament. Here we present a study of a number of fragmentation analysis techniques applied to filaments, and their sensitivity to characteristic fragmentation length-scales. We test the sensitivity to both single-tier and two-tier fragmentation, i.e. when the fragmentation can be characterised with one or two fragmentation length-scales respectively. The nearest neighbour separation, minimum spanning tree separation and two-point correlation function are all able to robustly detect characteristic fragmentation length-scales. The Fourier power spectrum and the Nth nearest neighbour technique are both poor techniques, and require very little scatter in the core spacings for the characteristic length-scale to be successfully determined. We develop a null hypothesis test to compare the results of the nearest neighbour and minimum spanning tree separation distribution with randomly placed cores. We show that a larger number of cores is necessary to successfully reject the null hypothesis if the underlying fragmentation is two-tier, N>20. Once the null is rejected we show how one may decide if the observed fragmentation is best described by single-tier or two-tier fragmentation, using either Akaike's information criterion or the Bayes factor. The analysis techniques, null hypothesis tests, and model selection approaches are all included in a new open-source Python/C library called FragMent.

We present an initial overview of the filamentary structure in the Orion A molecular cloud utilizing a high angular and velocity resolution C$^{18}$O(1-0) emission map that was recently produced as part of the CARMA-NRO Orion Survey. The main goal of this study is to build a credible method to study varying widths of filaments which has previously been linked to star formation in molecular clouds. Due to the diverse star forming activities taking place throughout its $\sim$20 pc length, together with its proximity of 388 pc, the Orion A molecular cloud provides an excellent laboratory for such an experiment to be carried out with high resolution and high sensitivity. Using the widely-known structure identification algorithm, DisPerSE, on a 3-dimensional (PPV) C$^{18}$O cube, we identified 625 relatively short (the longest being 1.74 pc) filaments over the entire cloud. We study the distribution of filament widths using FilChaP, a python package that we have developed and made publicly available. We find that the filaments identified in a 2 square degree PPV cube do not overlap spatially, except for the complex OMC-4 region that shows distinct velocity components along the line of sight. The filament widths vary between 0.02 and 0.3 pc depending on the amount of substructure that a filament possesses. The more substructure a filament has, the larger is its width. We also find that despite this variation, the filament width shows no anticorrelation with the central column density which is in agreement with previous Herschel observations.

We investigate the equilibrium charge distribution of dust grains in the interstellar medium (ISM). Our treatment accounts for collisional charging by electrons and ions, photoelectric charging due to a background interstellar radiation field, the collection of suprathermal cosmic ray electrons and photoelectric emission due to a cosmic ray induced ultraviolet radiation field within dense molecular clouds. We find that the charge equilibrium assumption is valid throughout the multi-phase ISM conditions investigated here, and should remain valid for simulations with resolutions down to AU scales. The charge distribution of dust grains is size, composition, and ISM environment dependent: local radiation field strength, $G$, temperature, $T$, and electron number density, $n_{\mathrm{e}}$. The charge distribution is tightly correlated with the `charging parameter', $G\sqrt{T}/n_{\mathrm{e}}$. In the molecular medium, both carbonaceous and silicate grains have predominantly negative or neutral charges with narrow distributions. In the cold neutral medium, carbonaceous and silicate grains vary from negative and narrow distributions, to predominantly positive and wide distributions depending on the magnitude of the charging parameter. In the warm neutral medium, grains of all sizes are positively charged with wide distributions. We derive revised parametric expressions that can be used to recover the charge distribution function of carbonaceous and silicate grains from 3.5 {\AA} to 0.25 $\mu$m as a function of the size, composition and ambient ISM parameters. Finally, we find that the parametric equations can be used in environments other than Solar neighborhood conditions, recovering the charge distribution function of dust grains in photon dominated regions.

Young low-mass protostars undergo short phases of high accretion and outburst activity leading to lumpy outflows. Recent observations have shown that the position-velocity and mass-velocity diagrams of such outflows exhibit individual bullet-like features; some of these bullets subscribe to a `Hubble Law' velocity relation, and others are manifest as `Hubble wedges'. In order to explore the origin of these features, we have developed a new episodic outflow model for the SPH code {\sc gandalf}, which mimics the accretion and ejection behaviour of FU Ori type stars. We apply this model to simulations of star formation, invoking two types of initial conditions: spherically symmetric cores in solid-body rotation with $\rho\propto r^{-2}$, and spherically symmetric turbulent cores with density proportional to the density of a Bonnor-Ebert sphere. For a wide range of model parameters, we find that episodic outflows lead to self-regulation of the ejected mass and momentum, and we achieve acceptable results, even with relatively low resolution. Using this model, we find that recently ejected outflow bullets produce a `Hubble wedge' in the position-velocity relation. However, once such a bullet hits the leading shock front, it decelerates and aligns with older bullets to form a `Hubble-law'. Bullets can be identified as bumps in the mass-velocity relation, which can be fit with a power-law, $dM/d\upsilon_{_{\rm RAD}}\propto\upsilon_{_{\rm RAD}}^{-1.5}$.

The formation of molecular hydrogen (H$_2$) and carbon monoxide (CO) is sensitive to the volume and column density distribution of the turbulent interstellar medium. In this paper, we study H$_2$ and CO formation in a large set of hydrodynamical simulations of periodic boxes with driven supersonic turbulence, as well as in colliding flows with the \textsc{Flash} code. The simulations include a non-equilibrium chemistry network, gas self-gravity, and diffuse radiative transfer. We investigate the spatial resolution required to obtain a converged H$_2$ and CO mass fraction and formation history. From the numerical tests we find that H$_2$ converges at a spatial resolution of $\lesssim0.2$~pc, while the required resolution for CO convergence is $\lesssim 0.04$~pc in gas with solar metallicity which is subject to a solar neighbourhood interstellar radiation field. We derive two critical conditions from our numerical results: the simulation has to at least resolve the densities at which (1) the molecule formation time in each cell in the computational domain is equal to the dissociation time, and (2) the formation time is equal to the the typical cell crossing time. For both H$_2$ and CO, the second criterion is more restrictive. The formulae we derive can be used to check whether molecule formation is converged in any given simulation.

The C$^{+}$ ion is an important coolant of interstellar gas, and so the [CII] fine structure line is frequently observed in the interstellar medium. However, the physical and chemical properties of the [CII]-emitting gas are still unclear. We carry out non-LTE radiative transfer simulations with RADMC-3D to study the [CII] line emission from a young, turbulent molecular cloud before the onset of star formation, using data from the SILCC-Zoom project. The [CII] emission is optically thick over 40% of the observable area with $I_{[\textrm{CII}]} > 0.5$ K km s$^{-1}$. To determine the physical properties of the [CII] emitting gas, we treat the [CII] emission as optically thin. We find that the [CII] emission originates primarily from cold, moderate density gas ($40 \lesssim T \lesssim 65$ K and $50 \lesssim n \lesssim 440$ cm$^{-3}$), composed mainly of atomic hydrogen and with an effective visual extinction between $\sim 0.50$ and $\sim 0.91$. Gas dominated by molecular hydrogen contributes only $\lesssim$20% of the total [CII] line emission. Thus, [CII] is not a good tracer for CO-dark H$_2$ at this early phase in the cloud's lifetime. We also find that the total gas, H and C$^+$ column densities are all correlated with the integrated [CII] line emission, with power law slopes ranging from 0.5 to 0.7. Further, the median ratio between the total column density and the [CII] line emission is $Y_{{\rm CII}}\approx 1.1 \times 10^{21}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$, and $Y_{{\rm CII}}$ scales with $I_{[\textrm{CII}]}^{-0.3}$. We expect $Y_{{\rm CII}}$ to change in environments with a lower or higher radiation field than simulated here.

Molecular-line observations of filaments in star-forming regions have revealed the existence of elongated coherent features within the filaments; these features are termed fibres. Here we caution that, since fibres are traced in PPV space, there is no guarantee that they represent coherent features in PPP space. We illustrate this contention using simulations of the growth of a filament from a turbulent medium. Synthetic C$^{18}$O observations of the simulated filaments reveal the existence of fibres very similar to the observed ones, i.e. elongated coherent features in the resulting PPV data-cubes. Analysis of the PPP data-cubes (i.e. 3D density fields) also reveals elongated coherent features, which we term sub-filaments. Unfortunately there is very poor correspondence between the fibres and the sub-filaments in the simulations. Both fibres and sub-filaments derive from inhomogeneities in the turbulent accretion flow onto the main filament. As a consequence, fibres are often affected by line-of-sight confusion. Similarly, sub-filaments are often affected by large velocity gradients, and even velocity discontinuities. These results suggest that extreme care should be taken when using velocity coherent features to constrain the underlying substructure within a filament.

Large scale surveys have brought about a revolution in astronomy. To analyse the resulting wealth of data, we need automated tools to identify, classify, and quantify the important underlying structures. We present here a method for classifying and quantifying a pixelated structure, based on its principal moments of inertia. The method enables us to automatically detect, and objectively compare, centrally condensed cores, elongated filaments and hollow rings. We illustrate the method by applying it to (i) observations of surface-density from Hi-GAL, and (ii) simulations of filament growth in a turbulent medium. We limit the discussion here to 2D data; in a future paper we will extend the method to 3D data.

We present the discovery of KELT-21b, a hot Jupiter transiting the $V=10.5$ A8V star HD 332124. The planet has an orbital period of $P=3.6127647\pm0.0000033$ days and a radius of $1.586_{-0.040}^{+0.039}$ $R_J$. We set an upper limit on the planetary mass of $M_P<3.91$ $M_J$ at $3\sigma$ confidence. We confirmed the planetary nature of the transiting companion using this mass limit and Doppler tomographic observations to verify that the companion transits HD 332124. These data also demonstrate that the planetary orbit is well-aligned with the stellar spin, with a sky-projected spin-orbit misalignment of $\lambda=-5.6_{-1.9}^{+1.7 \circ}$. The star has $T_{\mathrm{eff}}=7598_{-84}^{+81}$ K, $M_*=1.458_{-0.028}^{+0.029}$ $M_{\odot}$, $R_*=1.638\pm0.034$ $R_{\odot}$, and $v\sin I_*=146$ km s$^{-1}$, the highest projected rotation velocity of any star known to host a transiting hot Jupiter. The star also appears to be somewhat metal-poor and $\alpha$-enhanced, with [Fe/H]$=-0.405_{-0.033}^{+0.032}$ and [$\alpha$/Fe]$=0.145 \pm 0.053$; these abundances are unusual, but not extraordinary, for a young star with thin-disk kinematics like KELT-21. High-resolution imaging observations revealed the presence of a pair of stellar companions to KELT-21, located at a separation of 1.2" and with a combined contrast of $\Delta K_S=6.39 \pm 0.06$ with respect to the primary. Although these companions are most likely physically associated with KELT-21, we cannot confirm this with our current data. If associated, the candidate companions KELT-21 B and C would each have masses of $\sim0.12$ $M_{\odot}$, a projected mutual separation of $\sim20$ AU, and a projected separation of $\sim500$ AU from KELT-21. KELT-21b may be one of only a handful of known transiting planets in hierarchical triple stellar systems.

We present the results of smoothed particle hydrodynamic simulations investigating the evolution and fragmentation of filaments that are accreting from a turbulent medium. We show that the presence of turbulence, and the resulting inhomogeneities in the accretion flow, play a significant role in the fragmentation process. Filaments which experience a weakly turbulent accretion flow fragment in a two-tier hierarchical fashion, similar to the fragmentation pattern seen in the Orion Integral Shaped Filament. Increasing the energy in the turbulent velocity field results in more sub-structure within the filaments, and one sees a shift from gravity-dominated fragmentation to turbulence-dominated fragmentation. The sub-structure formed in the filaments is elongated and roughly parallel to the longitudinal axis of the filament, similar to the fibres seen in observations of Taurus, and suggests that the fray and fragment scenario is a possible mechanism for the production of fibres. We show that the formation of these fibre-like structures is linked to the vorticity of the velocity field inside the filament and the filament's accretion from an inhomogeneous medium. Moreover, we find that accretion is able to drive and sustain roughly sonic levels of turbulence inside the filaments, but is not able to prevent radial collapse once the filaments become supercritical. However, the supercritical filaments which contain fibre-like structures do not collapse radially, suggesting that fibrous filaments may not necessarily become radially unstable once they reach the critical line-density.

We use smoothed particle hydrodynamic simulations to investigate the growth of perturbations in infinitely long, initially sub-critical but accreting filaments. The growth of these perturbations leads to filament fragmentation and the formation of cores. Most previous work on this subject has been confined to the growth and fragmentation of equilibrium filaments and has found that there exists a preferential fragmentation length scale which is roughly 4 times the filament's diameter. Our results show a more complicated dispersion relation with a series of peaks linking perturbation wavelength and growth rate. These are due to gravo-acoustic oscillations along the longitudinal axis during the sub-critical phase of growth. The positions of the peaks in growth rate have a strong dependence on both the mass accretion rate onto the filament and the temperature of the gas. When seeded with a multi-wavelength density power spectrum there exists a clear preferred core separation equal to the largest peak in the dispersion relation. Our results allow one to estimate a minimum age for a filament which is breaking up into regularly spaced fragments, as well as a maximum accretion rate. We apply the model to observations of filaments in Taurus by Tafalla & Hacar (2015) and find accretion rates consistent with those estimated by Palmeirim et al. (2013).

We use Smoothed Particle Hydrodynamic simulations of cold, uniform density, self-gravitating filaments, to investigate their longitudinal collapse timescales; these timescales are important because they determine the time available for a filament to fragment into cores. A filament is initially characterised by its line-mass, $\mu$, its radius, $R$ (or equivalently its density $\rho\!=\!\mu/\pi R^2$), and its aspect ratio, $A\;\,(\equiv Z/R$, where $Z$ is its half-length). The gas is only allowed to contract longitudinally, i.e. parallel to the symmetry axis of the filament (the $z$-axis). Pon et al. (2012) have considered the global dynamics of such filaments analytically. They conclude that short filaments ($A\! < \!5$) collapse along the $z$-axis more-or-less homologously, on a time-scale $t_{_{\rm HOM}} \sim 0.44\,A\,(G\rho)^{-1/2}$; in contrast, longer filaments ($A\! > \!5$) undergo end-dominated collapse, i.e. two dense clumps form at the ends of the filament and converge on the centre sweeping up mass as they go, on a time-scale $t_{_{\rm END}} \sim 0.98\,A^{1/2}\,(G\rho)^{-1/2}$. Our simulations do not corroborate these predictions. First, for all $A\! > \!2$, the collapse time satisfies a single equation \[t_{_{\rm COL}}\;\sim\;(0.49+0.26A)(G\rho)^{-1/2}\,,\] which for large $A$ is much longer than the Pon et al. prediction. Second, for all $A\! > \!2$, the collapse is end-dominated. Third, before being swept up, the gas immediately ahead of an end-clump is actually accelerated outwards by the gravitational attraction of the approaching clump, resulting in a significant ram pressure. For high aspect ratio filaments the end-clumps approach an asymptotic inward speed, due to the fact that they are doing work both accelerating and compressing the gas they sweep up. Pon et al. appear to have neglected the outward acceleration and its consequences.