Normalized to: Clark, P.
[1]
oai:arXiv.org:2004.06731 [pdf] - 2126783
Simulations of the Milky Way's central molecular zone -- II. Star
formation
Submitted: 2020-04-14, last modified: 2020-07-02
The Milky Way's central molecular zone (CMZ) has emerged in recent years as a
unique laboratory for the study of star formation. Here we use the simulations
presented in Tress et al. 2020 to investigate star formation in the CMZ. These
simulations resolve the structure of the interstellar medium at sub-parsec
resolution while also including the large-scale flow in which the CMZ is
embedded. Our main findings are as follows. (1) While most of the star
formation happens in the CMZ ring at $R\gtrsim100 \pc$, a significant amount
also occurs closer to SgrA* at $R \lesssim 10\pc$. (2) Most of the star
formation in the CMZ happens downstream of the apocentres, consistent with the
"pearls-on-a-string" scenario, and in contrast to the notion that an absolute
evolutionary timeline of star formation is triggered by pericentre passage. (3)
Within the timescale of our simulations ($\sim100$~Myr), the depletion time of
the CMZ is constant within a factor of $\sim2$. This suggests that variations
in the star formation rate are primarily driven by variations in the mass of
the CMZ, caused for example by AGN feedback or externally-induced changes in
the bar-driven inflow rate, and not by variations in the depletion time. (4) We
study the trajectories of newly born stars in our simulations. We find several
examples that have age and 3D velocity compatible with those of the Arches and
Quintuplet clusters. Our simulations suggest that these prominent clusters
originated near the collision sites where the bar-driven inflow accretes onto
the CMZ, at symmetrical locations with respect to the Galactic centre, and that
they have already decoupled from the gas in which they were born.
[2]
oai:arXiv.org:2007.00032 [pdf] - 2126326
Characteristic scale of star formation. I. Clump formation efficiency on
local scales
Eden, D. J.;
Moore, T. J. T.;
Plume, R.;
Rigby, A. J.;
Urquhart, J. S.;
Marsh, K. A.;
Peñaloza, C. H.;
Clark, P. C.;
Smith, M. W. L.;
Tahani, K.;
Ragan, S. E.;
Thompson, M. A.;
Johnstone, D.;
Parsons, H.;
Rani, R.
Submitted: 2020-06-30
We have used the ratio of column densities derived independently from the
850-um continuum JCMT Plane Survey (JPS) and the $^{13}$CO/C$^{18}$O J=3-2
Heterodyne Inner Milky Way Plane Survey (CHIMPS) to produce maps of the
dense-gas mass fraction (DGMF) in two slices of the Galactic Plane centred at
l=30 and l=40. The observed DGMF is a metric for the instantaneous
clump-formation efficiency (CFE) in the molecular gas and a two-dimensional
power-spectrum analysis of the DGMF reveals a break in slope at the approximate
size scale of molecular clouds. We interpret this as the characteristic scale
of the amplitude of variations in the CFE and a constraint on the dominant
mechanism regulating the CFE and, hence, the star-formation efficiency in
CO-traced clouds. By splitting the two fields into velocity components
corresponding to the spiral arms that cross them, we find that individual
molecular clouds have mean CFE values of 40, 41, and 46 per cent for the
Scutum--Centaurus, Sagittarius, and Perseus spiral arms, respectively
[3]
oai:arXiv.org:2003.09052 [pdf] - 2124679
Design and operation of the ATLAS Transient Science Server
Smith, K. W.;
Smartt, S. J.;
Young, D. R.;
Tonry, J. L.;
Denneau, L.;
Flewelling, H.;
Heinze, A. N.;
Weiland, H. J.;
Stalder, B.;
Rest, A.;
Stubbs, C. W.;
Anderson, J. P.;
Chen, T. -W.;
Clark, P.;
Do, A.;
Förster, F.;
Fulton, M.;
Gillanders, J.;
McBrien, O. R.;
O'Neill, D.;
Srivastav, S.;
Wright, D. E.
Submitted: 2020-03-19, last modified: 2020-06-02
The Asteroid Terrestrial impact Last Alert System (ATLAS) system consists of
two 0.5m Schmidt telescopes with cameras covering 29 square degrees at plate
scale of 1.86 arcsec per pixel. Working in tandem, the telescopes routinely
survey the whole sky visible from Hawaii (above $\delta > -50^{\circ}$) every
two nights, exposing four times per night, typically reaching $o < 19$
magnitude per exposure when the moon is illuminated and $c < 19.5$ per exposure
in dark skies. Construction is underway of two further units to be sited in
Chile and South Africa which will result in an all-sky daily cadence from 2021.
Initially designed for detecting potentially hazardous near earth objects, the
ATLAS data enable a range of astrophysical time domain science. To extract
transients from the data stream requires a computing system to process the
data, assimilate detections in time and space and associate them with known
astrophysical sources. Here we describe the hardware and software
infrastructure to produce a stream of clean, real, astrophysical transients in
real time. This involves machine learning and boosted decision tree algorithms
to identify extragalactic and Galactic transients. Typically we detect 10-15
supernova candidates per night which we immediately announce publicly. The
ATLAS discoveries not only enable rapid follow-up of interesting sources but
will provide complete statistical samples within the local volume of 100 Mpc. A
simple comparison of the detected supernova rate within 100 Mpc, with no
corrections for completeness, is already significantly higher (factor 1.5 to 2)
than the current accepted rates.
[4]
oai:arXiv.org:2004.10764 [pdf] - 2119951
Download by Parachute: Retrieval of Assets from High Altitude Balloons
Sirks, E. L.;
Clark, P.;
Massey, R. J.;
Benton, S. J.;
Brown, A. M.;
Damaren, C. J.;
Eifler, T.;
Fraisse, A. A.;
Frenk, C.;
Funk, M.;
Galloway, M. N.;
Gill, A.;
Hartley, J. W.;
Holder, B.;
Huff, E. M.;
Jauzac, M.;
Jones, W. C.;
Lagattuta, D.;
Leung, J. S. -Y.;
Li, L.;
Luu, T. V. T.;
McCleary, J.;
Nagy, J. M.;
Netterfield, C. B.;
Redmond, S.;
Rhodes, J. D.;
Romualdez, L. J.;
Schmoll, J.;
Shaaban, M. M.;
Tam, S. -I.
Submitted: 2020-04-22
We present a publicly-available toolkit of flight-proven hardware and
software to retrieve 5 TB of data or small physical samples from a
stratospheric balloon platform. Before launch, a capsule is attached to the
balloon, and rises with it. Upon remote command, the capsule is released and
descends via parachute, continuously transmitting its location. Software to
predict the trajectory can be used to select a safe but accessible landing
site. We dropped two such capsules from the SuperBIT telescope, in September
2019. The capsules took ~37 minutes to descend from ~30 km altitude. They
drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of
their predicted landing sites. We found them easily, and successfully recovered
the data. We welcome interest from other balloon teams for whom the technology
would be useful.
[5]
oai:arXiv.org:2004.06724 [pdf] - 2078274
Simulations of the Milky Way's central molecular zone -- I. Gas dynamics
Submitted: 2020-04-14
We use hydrodynamical simulations to study the Milky Way's central molecular
zone (CMZ), i.e. the star-forming nuclear ring at Galactocentric radii
$R\lesssim200$ pc. The simulations comprise the gas flow in a Milky Way barred
potential out to $R=5$ kpc, which is necessary in order to capture the
large-scale environment in which the CMZ is embedded and with which it is
strongly interacting through the bar-driven inflow. The simulations also
include a non-equilibrium time-dependent chemical network, gas self-gravity,
and a sub-grid model for star formation and supernova feedback, all while
reaching sub-parsec resolution in the densest regions. Our main findings are as
follows: (1) The distinction between inner ($R\lesssim120$ pc) and outer
($120\lesssim R\lesssim450$ pc) CMZ that is sometimes proposed in the
literature is unnecessary. Instead, the CMZ is best described as single
structure, namely a star-forming ring with outer radius $R\simeq 200$ pc which
is interacting directly with the dust lanes that mediate the bar-driven inflow.
(2) This accretion can induce a significant tilt of the CMZ out of the plane. A
tilted CMZ might provide an alternative explanation to the $\infty$-shaped
structure identified in Herschel data by Molinari et al. 2011. (3) The bar in
our simulation efficiently drives an inflow from the Galactic disc ($R\simeq 3$
kpc) down to the CMZ ($R\simeq200$ pc) of the order of
$1\rm\,M_\odot\,yr^{-1}$, consistent with observational determinations. (4)
Self-gravity and supernovae feedback can drive an inflow from the CMZ inwards
towards the circumnuclear disc of the order of $\sim0.03\,\rm
M_\odot\,yr^{-1}$. (5) We give a new interpretation for the 3D placement of the
20 and 50 km s$^{-1}$ clouds, according to which they are close ($R\lesssim30$
pc) to the Galactic centre, but are also connected to the larger-scale streams
at $R\gtrsim100$ pc.
[6]
oai:arXiv.org:2002.12673 [pdf] - 2081011
The Spatial Evolution of Young Massive Clusters II. Looking for Imprints
of Star Formation in NGC 2264 with Gaia DR2
Buckner, Anne S. M.;
Khorrami, Zeinab;
Gonzalez, Marta;
Lumsden, Stuart L.;
Moraux, Estelle;
Oudmaijer, Rene D.;
Clark, Paul;
Joncour, Isabelle;
Blanco, Jose Manuel;
de la Calle, Ignacio;
Hacar, Alvaro;
Herrera-Fernandez, Jose M.;
Motte, Frederique;
Salgado, Jesus;
Valero-Martin, Luis
Submitted: 2020-02-28, last modified: 2020-03-18
Aims. To demonstrate that `INDICATE' is a powerful spatial analysis tool
which when combined with kinematic data from Gaia DR2 can be used to robustly
probe star formation history.
Methods. We compared the dynamic & spatial distributions of young stellar
objects (YSOs) at various evolutionary stages in NGC 2264 using Gaia DR2 proper
motion data and INDICATE.
Results. The dynamic & spatial behaviours of YSOs at different evolutionary
stages are distinct. Dynamically, Class II YSOs predominately have non-random
trajectories that are consistent with known substructures, whereas Class III
YSOs have random trajectories with no clear expansion or contraction patterns.
Spatially, there is a correlation between the evolutionary stage and source
concentration: 69.4% of Class 0/I, 27.9% of Class II, and 7.7% of Class III
objects are found to be clustered. The proportion of YSOs clustered with
objects of the same class also follows this trend. Class 0/I objects are both
found to be more tightly clustered with the general populous/objects of the
same class than Class IIs and IIIs by a factor of 1.2/4.1 and 1.9/6.6,
respectively. An exception to these findings is within 0.05deg of S Mon where
Class III objects mimic the behaviours of Class II sources across the wider
cluster region. Our results suggest (i) current YSOs distributions are a result
of dynamical evolution, (ii) prolonged star formation has been occurring
sequentially, and (iii) stellar feedback from S Mon is causing YSOs to appear
as more evolved sources.
Conclusions. Designed to provide a quantitative measure of clustering
behaviours, INDICATE is a powerful tool with which to perform rigorous spatial
analyses. Our findings are consistent with what is known about NGC 2264,
effectively demonstrating that when combined with kinematic data from Gaia DR2
INDICATE can be used to robustly study the star formation history of a cluster.
[7]
oai:arXiv.org:1909.05567 [pdf] - 2072564
The rise and fall of an extraordinary Ca-rich transient -- The discovery
of ATLAS19dqr/SN 2019bkc
Prentice, S. J.;
Maguire, K.;
Flörs, A.;
Taubenberger, S.;
Inserra, C.;
Frohmaier, C.;
Chen, T. W.;
Anderson, J. P.;
Ashall, C.;
Clark, P.;
Fraser, M.;
Galbany, L.;
Gal-Yam, A.;
Gromadzki, M.;
Gutiérrez, C. P.;
James, P. A.;
Jonker, P. G.;
Kankare, E.;
Leloudas, G.;
Magee, M. R.;
Mazzali, P. A.;
Nicholl, M.;
Pursiainen, M.;
Skillen, K.;
Smartt, S. J.;
Smith, K. W.;
Vogl, C.;
Young, D. R.
Submitted: 2019-09-12, last modified: 2020-02-25
This work presents the observations and analysis of ATLAS19dqr/SN 2019bkc, an
extraordinary rapidly evolving transient event located in an isolated
environment, tens of kiloparsecs from any likely host. Its light curves rise to
maximum light in $5-6$ d and then display a decline of $\Delta m_{15} \sim5$
mag. With such a pronounced decay, it has one of the most rapidly evolving
light curves known for a stellar explosion. The early spectra show similarities
to normal and `ultra-stripped' type Ic SNe, but the early nebular phase
spectra, which were reached just over two weeks after explosion, display
prominent calcium lines, marking SN 2019bkc as a Ca-rich transient. The Ca
emission lines at this phase show an unprecedented and unexplained blueshift of
10,000 -- 12,000 km/s. Modelling of the light curve and the early spectra
suggests that the transient had a low ejecta mass of $0.2 - 0.4$ M$_\odot$ and
a low kinetic energy of $ (2-4)\times 10^{50}$ erg, giving a specific kinetic
energy $\sim1$ [$10^{51}$ erg]/M$_\odot$. The origin of this event cannot be
unambiguously defined. While the abundance distribution used to model the
spectra marginally favours a progenitor of white dwarf origin through the
tentative identification of \ArII, the specific kinetic energy, which is
defined by the explosion mechanism, is found to be more similar to an
ultra-stripped core-collapse events. SN 2019bkc adds to the diverse range of
physical properties shown by Ca-rich events.
[8]
oai:arXiv.org:1912.06377 [pdf] - 2046398
Formation sites of Population III star formation: The effects of
different levels of rotation and turbulence on the fragmentation behavior of
primordial gas
Submitted: 2019-12-13, last modified: 2020-01-29
We use the moving-mesh code AREPO to investigate the effects of different
levels of rotation and turbulence on the fragmentation of primordial gas and
the formation of Population III stars. We consider 9 different combinations of
turbulence and rotation and carry out 5 different realizations of each setup,
yielding one of the largest sets of simulations of Population III star
formation ever performed. We find that fragmentation in Population III
star-forming systems is a highly chaotic process and show that the outcomes of
individual realizations of the same initial conditions often vary
significantly. However, some general trends are apparent. Increasing the
turbulent energy promotes fragmentation, while increasing the rotational energy
inhibits fragmentation. Within the 1000 yr period that we simulate, runs
including turbulence yield flat protostellar mass functions while purely
rotational runs show a more top-heavy distribution. The masses of the
individual protostars are distributed over a wide range from a few $10^{-3} \,
{\rm M_{\odot}}$ to several tens of ${\rm M_\odot}$. The total mass growth rate
of the stellar systems remains high throughout the simulations and depends only
weakly on the degree of rotation and turbulence. Mergers between protostars are
common, but predictions of the merger fraction are highly sensitive to the
criterion used to decide whether two protostars should merge. Previous studies
of Population III star formation have often considered only one realization per
set of initial conditions. However, our results demonstrate that robust trends
can only be reliably identified by considering averages over a larger sample of
runs.
[9]
oai:arXiv.org:1912.05986 [pdf] - 2034525
LSQ13ddu: A rapidly-evolving stripped-envelope supernova with early
circumstellar interaction signatures
Clark, Peter;
Maguire, Kate;
Inserra, Cosimo;
Prentice, Simon;
Smartt, Stephen J.;
Contreras, Carlos;
Hossenizadeh, Griffin;
Hsiao, Eric Y.;
Kankare, Erkki;
Kasliwal, Mansi;
Nugent, Peter;
Shahbandeh, Melissa;
Baltay, Charles;
Rabinowitz, David;
Arcavi, Iair;
Ashall, Chris;
Burns, Christopher R.;
Callis, Emma;
Chen, Ting-Wan;
Diamond, Tiara;
Fraser, Morgan;
Howell, D. Andrew;
Karamehmetoglu, Emir;
Kotak, Rubina;
Lyman, Joseph;
Morrell, Nidia;
Phillips, Mark;
Pignata, Giuliano;
Pursiainen, Miika;
Sollerman, Jesper;
Stritzinger, Maximilian;
Sullivan, Mark;
Young, David
Submitted: 2019-12-12, last modified: 2019-12-20
This paper describes the rapidly evolving and unusual supernova LSQ13ddu,
discovered by the La Silla-QUEST survey. LSQ13ddu displayed a rapid rise of
just 4.8$\pm$0.9 d to reach a peak brightness of $-$19.70$\pm$0.02 mag in the
$\mathit{LSQgr}$ band. Early spectra of LSQ13ddu showed the presence of weak
and narrow He I features arising from interaction with circumstellar material
(CSM). These interaction signatures weakened quickly, with broad features
consistent with those seen in stripped-envelope SNe becoming dominant around
two weeks after maximum. The narrow He I velocities are consistent with the
wind velocities of luminous blue variables but its spectra lack the typically
seen hydrogen features. The fast and bright early light curve is inconsistent
with radioactive $^{56}$Ni powering but can be explained through a combination
of CSM interaction and an underlying $^{56}$Ni decay component that dominates
the later time behaviour of LSQ13ddu. Based on the strength of the underlying
broad features, LSQ13ddu appears deficient in He compared to standard SNe Ib.
[10]
oai:arXiv.org:1912.04751 [pdf] - 2026525
Characterisation of the ground layer of turbulence at Paranal using a
robotic SLODAR system
Submitted: 2019-12-10
We describe the implementation of a robotic SLODAR instrument at the Cerro
Paranal observatory. The instrument measures the vertical profile of the
optical atmospheric turbulence strength, in 8 resolution elements, to a maximum
altitude ranging between 100 m and 500 m. We present statistical results of
measurements of the turbulence profile on a total of 875 nights between 2014
and 2018. The vertical profile of the ground layer of turbulence is very
varied, but in the median case most of the turbulence strength in the ground
layer is concentrated within the first 50 m altitude, with relatively weak
turbulence at higher altitudes up to 500 m. We find good agreement between
measurements of the seeing angle from the SLODAR and from the Paranal DIMM
seeing monitor, and also for seeing values extracted from the Shack-Hartmann
active optics sensor of VLT UT1, adjusting for the height of each instrument
above ground level. The SLODAR data suggest that a median improvement in the
seeing angle from 0.689 arcsec to 0.481 arcsec at wavelength 500 nm would be
obtained by fully correcting the ground-layer turbulence between the height of
the UTs (taken as 10 m) and altitude 500 m.
[11]
oai:arXiv.org:1911.11210 [pdf] - 2108968
Robust diffraction-limited NIR-to-NUV wide-field imaging from
stratospheric balloon-borne platforms -- SuperBIT science telescope
commissioning flight & performance
Romualdez, L. Javier;
Benton, Steven J.;
Brown, Anthony M.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Gill, Ajay;
Hartley, John W.;
Holder, Bradley;
Huff, Eric M.;
Jauzac, Mathilde;
Jones, William C.;
Lagattuta, David;
Leung, Jason S. -Y.;
Li, Lun;
Luu, Thuy Vy T.;
Massey, Richard J.;
McCleary, Jacqueline;
Mullaney, James;
Nagy, Johanna M.;
Netterfield, C. Barth;
Redmond, Susan;
Rhodes, Jason D.;
Schmoll, Jürgen;
Shaaban, Mohamed M.;
Sirks, Ellen;
Tam, Sut-Ieng
Submitted: 2019-11-25
At a fraction the total cost of an equivalent orbital mission, scientific
balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer
attractive, competitive, and effective observational capabilities -- namely
space-like resolution, transmission, and backgrounds -- that are well suited
for modern astronomy and cosmology. SuperBIT is a diffraction-limited,
wide-field, 0.5 m telescope capable of exploiting these observing conditions in
order to provide exquisite imaging throughout the near-IR to near-UV. It
utilizes a robust active stabilization system that has consistently
demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over
multiple 1 hour observations at float. This is achieved by actively tracking
compound pendulations via a three-axis gimballed platform, which provides
sky-fixed telescope stability at < 500 milliarcseconds and corrects for field
rotation, while employing high-bandwidth tip/tilt optics to remove residual
disturbances across the science imaging focal plane. SuperBIT's performance
during the 2019 commissioning flight benefited from a customized high-fidelity
science-capable telescope designed with exceptional thermo- and opto-mechanical
stability as well as tightly constrained static and dynamic coupling between
high-rate sensors and telescope optics. At the currently demonstrated level of
flight performance, SuperBIT capabilities now surpass the science requirements
for a wide variety of experiments in cosmology, astrophysics and stellar
dynamics.
[12]
oai:arXiv.org:1909.04545 [pdf] - 2000255
SN2018kzr: a rapidly declining transient from the destruction of a white
dwarf
McBrien, Owen R.;
Smartt, Stephen J.;
Chen, Ting-Wan;
Inserra, Cosimo;
Gillanders, James H.;
Sim, Stuart A.;
Jerkstrand, Anders;
Rest, Armin;
Valenti, Stefano;
Roy, Rupak;
Gromadzki, Mariusz;
Taubenberger, Stefan;
Flörs, Andreas;
Huber, Mark E.;
Chambers, Ken C.;
Gal-Yam, Avishay;
Young, David R.;
Nicholl, Matt;
Kankare, Erkki;
Smith, Ken W.;
Maguire, Kate;
Mandel, Ilya;
Prentice, Simon;
Rodríguez, Ósmar;
Garcia, Jonathon Pineda;
Gutiérrez, Claudia P.;
Galbany, Lluís;
Barbarino, Cristina;
Clark, Peter S. J.;
Sollerman, Jesper;
Kulkarni, Shrinivas R.;
De, Kishalay;
Buckley, David A. H.;
Rau, Arne
Submitted: 2019-09-10, last modified: 2019-11-19
We present SN2018kzr, the fastest declining supernova-like transient, second
only to the kilonova, AT2017gfo. SN2018kzr is characterized by a peak magnitude
of $M_r = -17.98$, peak bolometric luminosity of ${\sim} 1.4 \times 10^{43}$erg
s$^{\mathrm{-1}}$ and a rapid decline rate of $0.48 \pm 0.03$ mag
day$^{\textrm{-1}}$ in the $r$ band. The bolometric luminosity evolves too
quickly to be explained by pure $^{\mathrm{56}}$Ni heating, necessitating the
inclusion of an alternative powering source. Incorporating the spin-down of a
magnetized neutron star adequately describes the lightcurve and we estimate a
small ejecta mass of $M_\mathrm{ej} = 0.10 \pm 0.05$ $\textrm{M}_{\odot}$. Our
spectral modelling suggests the ejecta is composed of intermediate mass
elements including O, Si and Mg and trace amounts of Fe-peak elements, which
disfavours a binary neutron star merger. We discuss three explosion scenarios
for SN2018kzr, given the low ejecta mass, intermediate mass element composition
and the high likelihood of additional powering - core collapse of an
ultra-stripped progenitor, the accretion induced collapse of a white dwarf and
the merger of a white dwarf and neutron star. The requirement for an
alternative input energy source favours either the accretion induced collapse
with magnetar powering or a white dwarf - neutron star merger with energy from
disk wind shocks.
[13]
oai:arXiv.org:1911.05753 [pdf] - 2026341
The Cloud Factory I: Generating resolved filamentary molecular clouds
from galactic-scale forces
Submitted: 2019-11-13, last modified: 2019-11-18
We introduce a new suite of simulations, "The Cloud Factory", which
self-consistently forms molecular cloud complexes at high enough resolution to
resolve internal substructure (up to 0.25 Msol in mass) all while including
galactic-scale forces. We use a version of the Arepo code modified to include a
detailed treatment of the physics of the cold molecular ISM, and an analytical
galactic gravitational potential for computational efficiency. The simulations
have nested levels of resolution, with the lowest layer tied to tracer
particles injected into individual cloud complexes. These tracer refinement
regions are embedded in the larger simulation so continue to experience forces
from outside the cloud. This allows the simulations to act as a laboratory for
testing the effect of galactic environment on star formation. Here we introduce
our method and investigate the effect of galactic environment on filamentary
clouds. We find that cloud complexes formed after a clustered burst of
feedback, have shorter lengths and are less likely to fragment compared to
quiescent clouds (e.g. the Musca filament) or those dominated by the galactic
potential (e.g. Nessie). Spiral arms and differential rotation preferentially
align filaments, but strong feedback randomises them. Long filaments formed
within the cloud complexes are necessarily coherent with low internal velocity
gradients, which has implications for the formation of filamentary
star-clusters. Cloud complexes formed in regions dominated by supernova
feedback have fewer star-forming cores, and these are more widely distributed.
These differences show galactic-scale forces can have a significant impact on
star formation within molecular clouds.
[14]
oai:arXiv.org:1909.10520 [pdf] - 2030535
Simulations of the star-forming molecular gas in an interacting M51-like
galaxy
Submitted: 2019-09-23
We present here the first of a series of papers aimed at better understanding
the evolution and properties of giant molecular clouds (GMCs) in a galactic
context. We perform high resolution, three-dimensional {\sc arepo} simulations
of an interacting galaxy inspired by the well-observed M51 galaxy. Our fiducial
simulations include a non-equilibrium, time-dependent, chemical network that
follows the evolution of atomic and molecular hydrogen as well as carbon and
oxygen self-consistently. Our calculations also treat gas self-gravity and
subsequent star formation (described by sink particles), and coupled supernova
feedback. In the densest parts of the simulated interstellar medium (ISM) we
reach sub-parsec resolution, granting us the ability to resolve individual GMCs
and their formation and destruction self-consistently throughout the galaxy. In
this initial work we focus on the general properties of the ISM with a
particular focus on the cold star-forming gas. We discuss the role of the
interaction with the companion galaxy in generating cold molecular gas and
controlling stellar birth. We find that while the interaction drives
large-scale gas flows and induces spiral arms in the galaxy, it is of secondary
importance in determining gas fractions in the different ISM phases and the
overall star-formation rate. The behaviour of the gas on small GMC scales
instead is mostly controlled by the self-regulating property of the ISM driven
by coupled feedback.
[15]
oai:arXiv.org:1906.10129 [pdf] - 1929855
The geometry of the gas surrounding the Central Molecular Zone: on the
origin of localised molecular clouds with extreme velocity dispersions
Submitted: 2019-06-24
Observations of molecular gas near the Galactic centre ($| l | < 10^\circ$,
$| b | < 1^\circ$) reveal the presence of a distinct population of enigmatic
compact clouds which are characterised by extreme velocity dispersions ($\Delta
v > 100\, \rm km/s$). These Extended Velocity Features (EVFs) are very
prominent in the datacubes and dominate the kinematics of molecular gas just
outside the Central Molecular Zone (CMZ). The prototypical example of such a
cloud is Bania Clump 2. We show that similar features are naturally produced in
simulations of gas flow in a realistic barred potential. We analyse the
structure of the features obtained in the simulations and use this to interpret
the observations. We find that the features arise from collisions between
material that has been infalling rapidly along the dust lanes of the Milky Way
bar and material that belongs to one of the following two categories: (i)
material that has `overshot' after falling down the dust lanes on the opposite
side; (ii) material which is part of the CMZ. Both types of collisions involve
gas with large differences in the line-of-sight velocities, which is what
produces the observed extreme velocity dispersions. Examples of both categories
can be identified in the observations. If our interpretation is correct, we are
directly witnessing (a) collisions of clouds with relative speeds of $\sim
200\, \rm km/s$ and (b) the process of accretion of fresh gas onto the CMZ.
[16]
oai:arXiv.org:1809.00489 [pdf] - 1881526
Tracing the formation of molecular clouds via [CII], [CI] and CO
emission
Submitted: 2018-09-03, last modified: 2019-05-12
Our understanding of how molecular clouds form in the interstellar medium
(ISM) would be greatly helped if we had a reliable observational tracer of the
gas flows responsible for forming the clouds. Fine structure emission from
singly ionised and neutral carbon ([CII], [CI]) and rotational line emission
from CO are all observed to be associated with molecular clouds. However, it
remains unclear whether any of these tracers can be used to study the inflow of
gas onto an assembling cloud, or whether they primarily trace the cloud once it
has already assembled. In this paper, we address this issue with the help of
high resolution simulations of molecular cloud formation that include a
sophisticated treatment of the chemistry and thermal physics of the ISM. Our
simulations demonstrate that both [CI] and CO emission trace gas that is
predominantly molecular, with a density n ~ 500-1000 cm$^{-3}$, much larger
than the density of the inflowing gas. [CII] traces lower density material (n ~
100 cm$^{-3}$) that is mainly atomic at early times. A large fraction of the
[CII] emission traces the same structures as the [CI] or CO emission, but some
arises in the inflowing gas. Unfortunately, this emission is very faint and
will be difficult to detect with current observational facilities, even for
clouds situated in regions with an elevated interstellar radiation field.
[17]
oai:arXiv.org:1904.04321 [pdf] - 1864137
An open source toolkit for the tracking, termination and recovery of
high altitude balloon flights and payloads
Submitted: 2019-04-08
We present an open source toolkit of flight-proven electronic devices which
can be used to track, terminate and recover high altitude balloon flights and
payloads. Comprising a beacon, pyrotechnic and non-pyrotechnic cut-down devices
plus associated software, the toolkit can be used to: (i) track the location of
a flight via Iridium satellite communication; (ii) release lift and/or float
balloons manually or at pre-defined altitudes; (iii) locate the payload after
descent. The size and mass of the toolkit make it suitable for use on weather
or sounding balloon flights. We describe the technology readiness level of the
toolkit, based on over 20 successful flights to altitudes of typically 32,000
m.
[18]
oai:arXiv.org:1902.05525 [pdf] - 1832277
A Code to Make Your Own Synthetic ObservaTIonS (MYOSOTIS)
Khorrami, Zeinab;
Khalaj, Pouria;
Buckner, Anne S. M.;
Clark, Paul C.;
Moraux, Estelle;
Lumsden, Stuart;
Joncour, Isabelle;
Oudmaijer, Rene D.;
de la Calle, Ignacio;
Herrera-Fernandez, Jose M.;
Motte, Frederique;
Blanco, Jose Manuel;
Valero-Martin, Luis
Submitted: 2019-02-14
We introduce our new code MYOSOTIS (Make Your Own Synthetic ObservaTIonS)
which is designed to produce synthetic observations from simulated clusters.
The code can synthesise observations from both ground- and spaced-based
observatories, for a range of different filters, observational conditions and
angular/spectral resolution. In this paper, we highlight some of the features
of MYOSOTIS, creating synthetic observations from young massive star clusters.
Our model clusters are simulated using nbody6 code and have different total
masses, half-mass radii, and binary fractions. The synthetic observations are
made at the age of 2 Myr with Solar metallicity and under different extinction
conditions. For each cluster, we create synthetic images of the Hubble Space
Telescope (HST) in the visible (WFPC2/F555W) as well as Very Large Telescopes
(VLT) in the nearIR (SPHERE/IRDIS/Ks). We show how MYOSOTIS can be used to look
at mass function (MF) determinations. For this aim we re-estimate stellar
masses using a photometric analysis on the synthetic images. The synthetic MF
slopes are compared to their actual values. Our photometric analysis
demonstrate that depending on the adopted filter, extinction, angular
resolution and pixel sampling of the instruments, the power-law index of the
underlying MFs can be shallower than the observed ones by at least 0.25 dex
which is in agreement with the observed discrepancies reported in the
literature, specially for young star clusters.
[19]
oai:arXiv.org:1901.02371 [pdf] - 1834217
The Spatial Evolution of Young Massive Clusters I. A New Tool to
Quantitatively Trace Stellar Clustering
Buckner, Anne S. M.;
Khorrami, Zeinab;
Khalaj, Pouria;
Lumsden, Stuart L.;
Joncour, Isabelle;
Moraux, Estelle;
Clark, Paul;
Oudmaijer, Rene D.;
Blanco, Jose Manuel;
de la Calle, Ignacio;
Herrera-Fernandez, Jose M.;
Motte, Frederique;
Salgado, Jesus J.;
Valero-Martin, Luis
Submitted: 2019-01-07, last modified: 2019-01-18
Aims. To present the new novel statistical clustering tool 'INDICATE' which
assesses and quantifies the degree of spatial clustering of each object in a
dataset, discuss its applications as a tracer of morphological stellar features
in star forming regions, and to look for these features in the Carina Nebula
(NGC 3372).
Results. We successfully recover known stellar structure of the Carina
Nebula, including the 5 young star clusters in this region. Four sub-clusters
contain no, or very few, stars with a degree of association above random which
suggests they may be fluctuations in the field rather than real clusters. In
addition we find: (1) Stars in the NW and SE regions have significantly
different clustering tendencies, which is reflective of differences in the
apparent star formation activity in these regions. Further study is required to
ascertain the physical origin of the difference; (2) The different clustering
properties between these two regions are even more pronounced for OB stars; (3)
There are no signatures of classical mass segregation present in the SE region
- massive stars here are not spatially concentrated together above random; (4)
Stellar concentrations are more frequent around massive stars than typical for
the general population, particularly in the Tr14 cluster; (5) There is a
relation between the concentration of OB stars and the concentration of (lower
mass) stars around OB stars in the centrally concentrated Tr14 and Tr15, but no
such relation exists in Tr16. We conclude this is due to the highly
sub-structured nature of Tr16.
Conclusions. INDICATE is a powerful new tool employing a novel approach to
quantify the clustering tendencies of individual objects in a dataset within a
user-defined parameter space. As such it can be used in a wide array of data
analysis applications.
[20]
oai:arXiv.org:1809.08338 [pdf] - 1834057
Histogram of oriented gradients: a technique for the study of molecular
cloud formation
Soler, J. D.;
Beuther, H.;
Rugel, M.;
Wang, Y.;
Clark, P. C.;
Glover, S. C. O.;
Goldsmith, P. F.;
Heyer, M.;
Anderson, L. D.;
Goodman, A.;
Henning, Th.;
Kainulainen, J.;
Klessen, R. S.;
Longmore, S. N.;
McClure-Griffiths, N. M.;
Menten, K. M.;
Mottram, J. C.;
Ott, J.;
Ragan, S. E.;
Smith, R. J.;
Urquhart, J. S.;
Bigiel, F.;
Hennebelle, P.;
Roy, N.;
Schilke, P.
Submitted: 2018-09-21, last modified: 2019-01-02
We introduce the histogram of oriented gradients (HOG), a tool developed for
machine vision that we propose as a new metric for the systematic
characterization of observations of atomic and molecular gas and the study of
molecular cloud formation models. In essence, the HOG technique takes as input
extended spectral-line observations from two tracers and provides an estimate
of their spatial correlation across velocity channels.
We characterize HOG using synthetic observations of HI and $^{13}$CO(J=1-0)
emission from numerical simulations of MHD turbulence leading to the formation
of molecular gas after the collision of two atomic clouds. We find a
significant spatial correlation between the two tracers in velocity channels
where $v_{HI}\approx v_{^{13}CO}$, independent of the orientation of the
collision with respect to the line of sight.
We use HOG to investigate the spatial correlation of the HI, from the THOR
survey, and the $^{13}$CO(J=1-0) emission, from the GRS, toward the portion of
the Galactic plane 33.75$\lt l\lt$35.25$^{o}$ and $|b|\lt$1.25$^{o}$. We find a
significant spatial correlation between the tracers in extended portions of the
studied region. Although some of the regions with high spatial correlation are
associated with HI self-absorption features, suggesting that it is produced by
the cold atomic gas, the correlation is not exclusive to this kind of region.
The HOG results also indicate significant differences between individual
regions: some show spatial correlation in channels around $v_{HI}\approx
v_{^{13}CO}$ while others present this correlation in velocity channels
separated by a few km/s. We associate these velocity offsets to the effect of
feedback and to the presence of physical conditions that are not included in
the atomic-cloud-collision simulations, such as more general magnetic field
configurations, shear, and global gas infall.
[21]
oai:arXiv.org:1808.04382 [pdf] - 1790911
SN 2017ens: The Metamorphosis of a Luminous Broad-lined Type Ic
Supernova into an SN IIn
Chen, T. -W.;
Inserra, C.;
Fraser, M.;
Moriya, T. J.;
Schady, P.;
Schweyer, T.;
Filippenko, A. V.;
Perley, D. A.;
Ruiter, A. J.;
Seitenzahl, I.;
Sollerman, J.;
Taddia, F.;
Anderson, J. P.;
Foley, R. J.;
Jerkstrand, A.;
Ngeow, C. -C.;
Pan, Y. -C.;
Pastorello, A.;
Points, S.;
Smartt, S. J.;
Smith, K. W.;
Taubenberger, S.;
Wiseman, P.;
Young, D. R.;
Benetti, S.;
Berton, M.;
Bufano, F.;
Clark, P.;
Della Valle, M.;
Galbany, L.;
Gal-Yam, A.;
Gromadzki, M.;
Gutiérrez, C. P.;
Heinze, A.;
Kankare, E.;
Kilpatrick, C. D.;
Kuncarayakti, H.;
Leloudas, G.;
Lin, Z. -Y.;
Maguire, K.;
Mazzali, P.;
McBrien, O.;
Prentice, S. J.;
Rau, A.;
Rest, A.;
Siebert, M. R.;
Stalder, B.;
Tonry, J. L.;
Yu, P. -C.
Submitted: 2018-08-13, last modified: 2018-12-03
We present observations of supernova (SN) 2017ens, discovered by the ATLAS
survey and identified as a hot blue object through the GREAT program. The
redshift z=0.1086 implies a peak brightness of M_g=-21.1 mag, placing the
object within the regime of superluminous supernovae. We observe a dramatic
spectral evolution, from initially being blue and featureless, to later
developing features similar to those of the broadlined Type Ic SN 1998bw, and
finally showing ~2000 km s^-1 wide H-alpha and H-beta emission. Relatively
narrow Balmer emission (reminiscent of a SN IIn) is present at all times. We
also detect coronal lines, indicative of a dense circumstellar medium. We
constrain the progenitor wind velocity to ~50-60 km s^-1 based on P-Cygni
profiles, which is far slower than those present in Wolf-Rayet stars. This may
suggest that the progenitor passed through a luminous blue variable phase, or
that the wind is instead from a binary companion red supergiant star. At late
times we see the ~2000 km s^-1 wide H-alpha emission persisting at high
luminosity (~3x10^40 erg s^-1) for at least 100 day, perhaps indicative of
additional mass loss at high velocities that could have been ejected by a
pulsational pair instability.
[22]
oai:arXiv.org:1809.10696 [pdf] - 1759391
Synthetic [CII] emission maps of a simulated molecular cloud in
formation
Franeck, A.;
Walch, S.;
Seifried, D.;
Clarke, S. D.;
Ossenkopf-Okada, V.;
Glover, S. C. O.;
Klessen, R. S.;
Girichidis, P.;
Naab, T.;
Wünsch, R.;
Clark, P. C.;
Pellegrini, E.;
Peters, T.
Submitted: 2018-09-27
The C$^{+}$ ion is an important coolant of interstellar gas, and so the [CII]
fine structure line is frequently observed in the interstellar medium. However,
the physical and chemical properties of the [CII]-emitting gas are still
unclear. We carry out non-LTE radiative transfer simulations with RADMC-3D to
study the [CII] line emission from a young, turbulent molecular cloud before
the onset of star formation, using data from the SILCC-Zoom project. The [CII]
emission is optically thick over 40% of the observable area with
$I_{[\textrm{CII}]} > 0.5$ K km s$^{-1}$. To determine the physical properties
of the [CII] emitting gas, we treat the [CII] emission as optically thin. We
find that the [CII] emission originates primarily from cold, moderate density
gas ($40 \lesssim T \lesssim 65$ K and $50 \lesssim n \lesssim 440$ cm$^{-3}$),
composed mainly of atomic hydrogen and with an effective visual extinction
between $\sim 0.50$ and $\sim 0.91$. Gas dominated by molecular hydrogen
contributes only $\lesssim$20% of the total [CII] line emission. Thus, [CII] is
not a good tracer for CO-dark H$_2$ at this early phase in the cloud's
lifetime. We also find that the total gas, H and C$^+$ column densities are all
correlated with the integrated [CII] line emission, with power law slopes
ranging from 0.5 to 0.7. Further, the median ratio between the total column
density and the [CII] line emission is $Y_{{\rm CII}}\approx 1.1 \times
10^{21}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$, and $Y_{{\rm CII}}$ scales with
$I_{[\textrm{CII}]}^{-0.3}$. We expect $Y_{{\rm CII}}$ to change in
environments with a lower or higher radiation field than simulated here.
[23]
oai:arXiv.org:1806.10609 [pdf] - 1790794
A nearby superluminous supernova with a long pre-maximum 'plateau' and
strong CII features
Anderson, J. P.;
Pessi, P. J.;
Dessart, L.;
Inserra, C.;
Hiramatsu, D.;
Taggart, K.;
Smartt, S. J.;
Leloudas, G.;
Chen, T. -W.;
Möller, A.;
Roy, R.;
Schulze, S.;
Perley, D.;
Selsing, J.;
Prentice, S. J.;
Gal-Yam, A.;
Angus, C. R.;
Arcavi, I.;
Ashall, C.;
Bulla, M.;
Bray, C.;
Burke, J.;
Callis, E.;
Cartier, R.;
Chang, S. -W.;
Chambers, K.;
Clark, P.;
Denneau, L.;
Dennefeld, M.;
Flewelling, H.;
Fraser, M.;
Galbany, L.;
Gromadzki, M.;
Gutiérrez, C. P.;
Heinze, A.;
Hosseinzadeh, G.;
Howell, D. A.;
Hsiao, E. Y.;
Kankare, E.;
Kostrzewa-Rutkowska, Z.;
Magnier, E.;
Maguire, K.;
Mazzali, P.;
McBrien, O.;
McCully, C.;
Morrell, N.;
Lowe, T. B.;
Onken, C. A.;
Onori, F.;
Phillips, M. M.;
Rest, A.;
Ridden-Harper, R.;
Ruiter, A. J.;
Sand, D. J.;
Smith, K. W.;
Smith, M.;
Stalder, B.;
Stritzinger, M. D.;
Sullivan, M.;
Tonry, J. L.;
Tucker, B. E.;
Valenti, S.;
Wainscoat, R.;
Waters, C. Z.;
Wolf, C.;
Young, D.
Submitted: 2018-06-27, last modified: 2018-09-21
Super-luminous supernovae (SLSNe) are rare events defined as being
significantly more luminous than normal terminal stellar explosions. The source
of the extra powering needed to achieve such luminosities is still unclear.
Discoveries in the local Universe (i.e. $z<0.1$) are scarce, but afford dense
multi-wavelength observations. Additional low-redshift objects are therefore
extremely valuable. We present early-time observations of the type I SLSN
ASASSN-18km/SN~2018bsz. These data are used to characterise the event and
compare to literature SLSNe and spectral models. Host galaxy properties are
also analysed. Optical and near-IR photometry and spectroscopy were analysed.
Early-time ATLAS photometry was used to constrain the rising light curve. We
identified a number of spectral features in optical-wavelength spectra and
tracked their time evolution. Finally, we used archival host galaxy photometry
together with HII region spectra to constrain the host environment.
ASASSN-18km/SN~2018bsz is found to be a type I SLSN in a galaxy at a redshift
of 0.0267 (111 Mpc), making it the lowest-redshift event discovered to date.
Strong CII lines are identified in the spectra. Spectral models produced by
exploding a Wolf-Rayet progenitor and injecting a magnetar power source are
shown to be qualitatively similar to ASASSN-18km/SN~2018bsz, contrary to most
SLSNe-I that display weak/non-existent CII lines. ASASSN-18km/SN~2018bsz
displays a long, slowly rising, red 'plateau' of $>$26 days, before a steeper,
faster rise to maximum. The host has an absolute magnitude of --19.8 mag ($r$),
a mass of M$_{*}$ = 1.5$^{+0.08}_{-0.33}$ $\times$10$^{9}$ M$_{\odot}$ , and a
star formation rate of = 0.50$^{+2.22}_{-0.19}$ M$_{\odot}$ yr$^{-1}$. A nearby
HII region has an oxygen abundance (O3N2) of 8.31$\pm$0.01 dex.
[24]
oai:arXiv.org:1807.05965 [pdf] - 1755988
The Cow: discovery of a luminous, hot and rapidly evolving transient
Prentice, S. J.;
Maguire, K.;
Smartt, S. J.;
Magee, M. R.;
Schady, P.;
Sim, S.;
Chen, T. -W.;
Clark, P.;
Colin, C.;
Fulton, M.;
McBrien, O.;
O`Neill, D.;
Smith, K. W.;
Ashall, C.;
Chambers, K. C.;
Denneau, L.;
Flewelling, H. A.;
Heinze, A.;
Holoien, T. W. -S.;
Huber, M. E.;
Kochanek, C. S.;
Mazzali, P. A.;
Prieto, J. L.;
Rest, A.;
Shappee, B. J.;
Stalder, B.;
Stanek, K. Z.;
Stritzinger, M. D.;
Thompson, T. A.;
Tonry, J. L.
Submitted: 2018-07-16, last modified: 2018-08-29
We present the ATLAS discovery and initial analysis of the first 18 days of
the unusual transient event, ATLAS18qqn/AT2018cow. It is characterized by a
high peak luminosity ($\sim$1.7 $\times$ 10$^{44}$ erg s$^{-1}$), rapidly
evolving light curves ($>$5 mag rise to peak in $\sim$3.5 days), and hot
blackbody spectra, peaking at $\sim$27000 K that are relatively featureless and
unchanging over the first two weeks. The bolometric light curve cannot be
powered by radioactive decay under realistic assumptions. The detection of
high-energy emission may suggest a central engine as the powering source. Using
a magnetar model, we estimated an ejected mass of $0.1-0.4$ \msol, which lies
between that of low-energy core-collapse events and the kilonova, AT2017gfo.
The spectra cooled rapidly from 27000 to 15000 K in just over 2 weeks but
remained smooth and featureless. Broad and shallow emission lines appear after
about 20 days, and we tentatively identify them as He I although they would be
redshifted from their rest wavelengths. We rule out that there are any features
in the spectra due to intermediate mass elements up to and including the
Fe-group. The presence of r-process elements cannot be ruled out. If these
lines are due to He, then we suggest a low-mass star with residual He as a
potential progenitor. Alternatively, models of magnetars formed in neutron-star
mergers give plausible matches to the data.
[25]
oai:arXiv.org:1807.09869 [pdf] - 1723027
Auto-tuned thermal control on stratospheric balloon experiments
Redmond, S.;
Benton, S. J.;
Brown, A. M.;
Clark, P.;
Damaren, C. J.;
Eifler, T.;
Fraisse, A. A.;
Galloway, M. N.;
Hartley, J. W.;
Jauzac, M.;
Jones, W. C.;
Li, L.;
Luu, T. V. T.;
Massey, R. J.;
Mccleary, J.;
Netterfield, C. B.;
Padilla, I. L.;
Rhodes, J. D.;
Romualdez, L. J.;
Schmoll, J.;
Tam, S.
Submitted: 2018-07-25
Balloon-borne telescopes present unique thermal design challenges which are a
combination of those present for both space and ground telescopes. At altitudes
of 35-40 km, convection effects are minimal and difficult to characterize.
Radiation and conduction are the predominant heat transfer mechanisms reducing
the thermal design options. For long duration flights payload mass is a
function of power consumption making it an important optimization parameter.
SuperBIT, or the Super-pressure Balloon-borne Imaging Telescope, aims to study
weak lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving
0.02" stability and capturing deep exposures from visible to near UV
wavelengths. To achieve the theoretical stratospheric diffraction-limited
resolution of 0.25", mirror deformation gradients must be kept to within 20nm.
The thermal environment must thus be stable on time scales of an hour and the
thermal gradients must be minimized on the telescope. SuperBIT plans to
implement two types of parameter solvers; one to validate the thermal design
and the other to tightly control the thermal environment.
[26]
oai:arXiv.org:1806.11308 [pdf] - 1716177
Characterisation and Testing of CHEC-M - a camera prototype for the
Small-Sized Telescopes of the Cherenkov Telescope Array
Zorn, J.;
White, R.;
Watson, J. J.;
Armstrong, T. P.;
Balzer, A.;
Barcelo, M.;
Berge, D.;
Bose, R.;
Brown, A. M.;
Bryan, M.;
Chadwick, P. M.;
Clark, P.;
Costantini, H.;
Cotter, G.;
Dangeon, L.;
Daniel, M.;
De Franco, A.;
Deiml, P.;
Fasola, G.;
Funk, S.;
Gebyehu, M.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hinton, J. A.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Leach, S. A.;
Blanc, O. Le;
Malouf, A.;
Molyneux, P.;
Moore, P.;
Prokoph, H.;
Okumura, A.;
Ross, D.;
Rowell, G.;
Sapozhnikov, L.;
Schoorlemmer, H.;
Sol, H.;
Stephan, M.;
Tajima, H.;
Tibaldo, L.;
Varner, G.;
Zink, A.
Submitted: 2018-06-29, last modified: 2018-07-16
The Compact High Energy Camera (CHEC) is a camera design for the Small-Sized
Telescopes (SSTs; 4 m diameter mirror) of the Cherenkov Telescope Array (CTA).
The SSTs are focused on very-high-energy $\gamma$-ray detection via atmospheric
Cherenkov light detection over a very large area. This implies many individual
units and hence cost-effective implementation. CHEC relies on dual-mirror
optics to reduce the plate-scale and make use of 6 $\times$ 6 mm$^2$ pixels,
leading to a low-cost ($\sim$150 kEuro), compact (0.5 m $\times$ 0.5 m), and
light ($\sim$45 kg) camera with 2048 pixels providing a camera FoV of $\sim$9
degrees. The electronics are based on custom TARGET (TeV array readout with
GSa/s sampling and event trigger) ASICs and FPGAs sampling incoming signals at
a gigasample per second, with flexible camera-level triggering within a single
backplane FPGA. CHEC is designed to observe in the $\gamma$-ray energy range of
1$-$300 TeV, and at impact distances up to $\sim$500 m. To accommodate this and
provide full flexibility for later data analysis, full waveforms with 96
samples for all 2048 pixels can be read out at rates up to $\sim$900 Hz. The
first prototype, CHEC-M, based on multi-anode photomultipliers (MAPMs) as
photosensors, was commissioned and characterised in the laboratory and during
two measurement campaigns on a telescope structure at the Paris Observatory in
Meudon. In this paper, the results and conclusions from the laboratory and
on-site testing of CHEC-M are presented. They have provided essential input on
the system design and on operational and data analysis procedures for a camera
of this type. A second full-camera prototype based on Silicon photomultipliers
(SiPMs), addressing the drawbacks of CHEC-M identified during the first
prototype phase, has already been built and is currently being commissioned and
tested in the laboratory.
[27]
oai:arXiv.org:1807.02887 [pdf] - 1712304
Overview, design, and flight results from SuperBIT: a high-resolution,
wide-field, visible-to-near-UV balloon-borne astronomical telescope
Romualdez, L. Javier;
Benton, Steven J.;
Brown, Anthony M.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Hartley, John W.;
Jauzac, Mathilde;
Jones, William C.;
Li, Lun;
Luu, Thuy Vy T.;
Massey, Richard J.;
Mccleary, Jacqueline;
Netterfield, C. Barth;
Redmond, Susan;
Rhodes, Jason D.;
Schmoll, Jürgen;
Tam, Sut-Ieng
Submitted: 2018-07-08
Balloon-borne astronomy is a unique tool that allows for a level of image
stability and significantly reduced atmospheric interference without the often
prohibitive cost and long development time-scale that are characteristic of
space-borne facility-class instruments. The Super-pressure Balloon-borne
Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02"
image stability over a 0.5 degree field-of-view for deep exposures within the
visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a
wide range of balloon-borne observations, including solar and extrasolar
planetary spectroscopy as well as resolved stellar populations and distant
galaxies. We report on the overall payload design and instrumentation
methodologies for SuperBIT as well as telescope and image stability results
from two test flights. Prospects for the SuperBIT project are outlined with an
emphasis on the development of a fully operational, three-month science flight
from New Zealand in 2020.
[28]
oai:arXiv.org:1806.08564 [pdf] - 1713029
Synthetic C$^{18}$O observations of fibrous filaments: the problems of
mapping from PPV to PPP
Submitted: 2018-06-22, last modified: 2018-06-25
Molecular-line observations of filaments in star-forming regions have
revealed the existence of elongated coherent features within the filaments;
these features are termed fibres. Here we caution that, since fibres are traced
in PPV space, there is no guarantee that they represent coherent features in
PPP space. We illustrate this contention using simulations of the growth of a
filament from a turbulent medium. Synthetic C$^{18}$O observations of the
simulated filaments reveal the existence of fibres very similar to the observed
ones, i.e. elongated coherent features in the resulting PPV data-cubes.
Analysis of the PPP data-cubes (i.e. 3D density fields) also reveals elongated
coherent features, which we term sub-filaments. Unfortunately there is very
poor correspondence between the fibres and the sub-filaments in the
simulations. Both fibres and sub-filaments derive from inhomogeneities in the
turbulent accretion flow onto the main filament. As a consequence, fibres are
often affected by line-of-sight confusion. Similarly, sub-filaments are often
affected by large velocity gradients, and even velocity discontinuities. These
results suggest that extreme care should be taken when using velocity coherent
features to constrain the underlying substructure within a filament.
[29]
oai:arXiv.org:1803.08945 [pdf] - 1663413
Artificial guide stars for adaptive optics using unmanned aerial
vehicles
Submitted: 2018-03-23
Astronomical adaptive optics systems are used to increase effective telescope
resolution. However, they cannot be used to observe the whole sky since one or
more natural guide stars of sufficient brightness must be found within the
telescope field of view for the AO system to work. Even when laser guide stars
are used, natural guide stars are still required to provide a constant position
reference. Here, we introduce a technique to overcome this problem by using
rotary unmanned aerial vehicles (UAVs) as a platform from which to produce
artificial guide stars. We describe the concept, which relies on the UAV being
able to measure its precise relative position. We investigate the adaptive
optics performance improvements that can be achieved, which in the cases
presented here can improve the Strehl ratio by a factor of at least 2 for a 8~m
class telescope. We also discuss improvements to this technique, which is
relevant to both astronomical and solar adaptive optics systems.
[30]
oai:arXiv.org:1711.01221 [pdf] - 1630239
CO line ratios in molecular clouds: the impact of environment
Submitted: 2017-11-03, last modified: 2017-12-15
Line emission is strongly dependent on the local environmental conditions in
which the emitting tracers reside. In this work, we focus on modelling the CO
emission from simulated giant molecular clouds (GMCs), and study the variations
in the resulting line ratios arising from the emission from the $J=1-0$,
$J=2-1$ and $J=3-2$ transitions. We perform a set of smoothed particle
hydrodynamics (SPH) simulations with time-dependent chemistry, in which
environmental conditions -- including total cloud mass, density, size, velocity
dispersion, metallicity, interstellar radiation field (ISRF) and the cosmic ray
ionisation rate (CRIR) -- were systematically varied. The simulations were then
post-processed using radiative transfer to produce synthetic emission maps in
the 3 transitions quoted above. We find that the cloud-averaged values of the
line ratios can vary by up to $\pm 0.3$ dex, triggered by changes in the
environmental conditions. Changes in the ISRF and/or in the CRIR have the
largest impact on line ratios since they directly affect the abundance,
temperature and distribution of CO-rich gas within the clouds. We show that the
standard methods used to convert CO emission to H$_2$ column density can
underestimate the total H$_2$ molecular gas in GMCs by factors of 2 or 3,
depending on the environmental conditions in the clouds.
[32]
oai:arXiv.org:1710.05841 [pdf] - 1589829
A kilonova as the electromagnetic counterpart to a gravitational-wave
source
Smartt, S. J.;
Chen, T. -W.;
Jerkstrand, A.;
Coughlin, M.;
Kankare, E.;
Sim, S. A.;
Fraser, M.;
Inserra, C.;
Maguire, K.;
Chambers, K. C.;
Huber, M. E.;
Kruhler, T.;
Leloudas, G.;
Magee, M.;
Shingles, L. J.;
Smith, K. W.;
Young, D. R.;
Tonry, J.;
Kotak, R.;
Gal-Yam, A.;
Lyman, J. D.;
Homan, D. S.;
Agliozzo, C.;
Anderson, J. P.;
Ashall, C. R. Angus C.;
Barbarino, C.;
Bauer, F. E.;
Berton, M.;
Botticella, M. T.;
Bulla, M.;
Bulger, J.;
Cannizzaro, G.;
Cano, Z.;
Cartier, R.;
Cikota, A.;
Clark, P.;
De Cia, A.;
Della Valle, M.;
Denneau, L.;
Dennefeld, M.;
Dessart, L.;
Dimitriadis, G.;
Elias-Rosa, N.;
Firth, R. E.;
Flewelling, H.;
Flors, A.;
Franckowiak, A.;
Frohmaier, C.;
Galbany, L.;
Gonzalez-Gaitan, S.;
Greiner, J.;
Gromadzki, M.;
Guelbenzu, A. Nicuesa;
Gutierrez, C. P.;
Hamanowicz, A.;
Hanlon, L.;
Harmanen, J.;
Heintz, K. E.;
Heinze, A.;
Hernandez, M. -S.;
Hodgkin, S. T.;
Hook, I. M.;
Izzo, L.;
James, P. A.;
Jonker, P. G.;
Kerzendorf, W. E.;
Klose, S.;
Kostrzewa-Rutkowska, Z.;
Kowalski, M.;
Kromer, M.;
Kuncarayakti, H.;
Lawrence, A.;
Lowe, T. B.;
Magnier, E. A.;
Manulis, I.;
Martin-Carrillo, A.;
Mattila, S.;
McBrien, O.;
Muller, A.;
Nordin, J.;
O'Neill, D.;
Onori, F.;
Palmerio, J. T.;
Pastorello, A.;
Patat, F.;
Pignata, G.;
Podsiadlowski, Ph.;
Pumo, M. L.;
Prentice, S. J.;
Rau, A.;
Razza, A.;
Rest, A.;
Reynolds, T.;
Roy, R.;
Ruiter, A. J.;
Rybicki, K. A.;
Salmon, L.;
Schady, P.;
Schultz, A. S. B.;
Schweyer, T.;
Seitenzahl, I. R.;
Smith, M.;
Sollerman, J.;
Stalder, B.;
Stubbs, C. W.;
Sullivan, M.;
Szegedi, H.;
Taddia, F.;
Taubenberger, S.;
Terreran, G.;
van Soelen, B.;
Vos, J.;
Wainscoat, R. J.;
Walton, N. A.;
Waters, C.;
Weiland, H.;
Willman, M.;
Wiseman, P.;
Wright, D. E.;
Wyrzykowski, L.;
Yaron, O.
Submitted: 2017-10-16, last modified: 2017-10-17
Gravitational waves were discovered with the detection of binary black hole
mergers and they should also be detectable from lower mass neutron star
mergers. These are predicted to eject material rich in heavy radioactive
isotopes that can power an electromagnetic signal called a kilonova. The
gravitational wave source GW170817 arose from a binary neutron star merger in
the nearby Universe with a relatively well confined sky position and distance
estimate. Here we report observations and physical modelling of a rapidly
fading electromagnetic transient in the galaxy NGC4993, which is spatially
coincident with GW170817 and a weak short gamma-ray burst. The transient has
physical parameters broadly matching the theoretical predictions of blue
kilonovae from neutron star mergers. The emitted electromagnetic radiation can
be explained with an ejected mass of 0.04 +/- 0.01 Msol, with an opacity of
kappa <= 0.5 cm2/gm at a velocity of 0.2 +/- 0.1c. The power source is
constrained to have a power law slope of beta = -1.2 +/- 0.3, consistent with
radioactive powering from r-process nuclides. We identify line features in the
spectra that are consistent with light r-process elements (90 < A < 140). As it
fades, the transient rapidly becomes red, and emission may have contribution by
a higher opacity, lanthanide-rich ejecta component. This indicates that neutron
star mergers produce gravitational waves, radioactively powered kilonovae, and
are a nucleosynthetic source of the r-process elements.
[33]
oai:arXiv.org:1704.06487 [pdf] - 1582758
SILCC-Zoom: The dynamical and chemical evolution of molecular clouds
Submitted: 2017-04-21, last modified: 2017-09-06
We present 3D "zoom-in" simulations of the formation of two molecular clouds
out of the galactic interstellar medium. We model the clouds - identified from
the SILCC simulations - with a resolution of up to 0.06 pc using adaptive mesh
refinement in combination with a chemical network to follow heating, cooling,
and the formation of H$_2$ and CO including (self-) shielding. The two clouds
are assembled within a few million years with mass growth rates of up to $\sim$
10$^{-2}$ M$_\mathrm{sun}$ yr$^{-1}$ and final masses of $\sim$ 50 000
M$_\mathrm{sun}$. A spatial resolution of $\lesssim$ 0.1 pc is required for
convergence with respect to the mass, velocity dispersion, and chemical
abundances of the clouds, although these properties also depend on the cloud
definition such as based on density thresholds, H$_2$ or CO mass fraction. To
avoid grid artefacts, the progressive increase of resolution has to occur
within the free-fall time of the densest structures (1 - 1.5 Myr) and $\gtrsim$
200 time steps should be spent on each refinement level before the resolution
is progressively increased further. This avoids the formation of spurious,
large-scale, rotating clumps from unresolved turbulent flows. While CO is a
good tracer for the evolution of dense gas with number densities $n \geq$ 300
cm$^{-3}$, H$_2$ is also found for $n \lesssim 30$ cm$^{-3}$ due to turbulent
mixing and becomes dominant at column densities around 30 - 50 M$_\mathrm{sun}$
pc$^{-2}$. The CO-to-H$_2$ ratio steadily increases within the first 2 Myr
whereas $X_\mathrm{CO}\simeq$ 1 - 4 $\times$ 10$^{20}$ cm$^{-2}$ (K km
s$^{-1}$)$^{-1}$ is approximately constant since the CO(1-0) line quickly
becomes optically thick.
[34]
oai:arXiv.org:1702.08467 [pdf] - 1559745
New ALMA constraints on the star-forming ISM at low metallicity: A 50 pc
view of the blue compact dwarf galaxy SBS0335-052
Cormier, D.;
Bendo, G. J.;
Hony, S.;
Lebouteiller, V.;
Madden, S. C.;
Galliano, F.;
Glover, S. C. O.;
Klessen, R. S.;
Abel, N. P.;
Bigiel, F.;
Clark, P. C.
Submitted: 2017-02-27, last modified: 2017-04-07
Properties of the cold interstellar medium of low-metallicity galaxies are
not well-known due to the faintness and extremely small scale on which emission
is expected. We present deep ALMA band 6 (230GHz) observations of the nearby,
low-metallicity (12 + log(O/H) = 7.25) blue compact dwarf galaxy SBS0335-052 at
an unprecedented resolution of 0.2 arcsec (52 pc). The 12CO J=2-1 line is not
detected and we report a 3-sigma upper limit of LCO(2-1) = 3.6x10^4 K km/s
pc^2. Assuming that molecular gas is converted into stars with a given
depletion time, ranging from 0.02 to 2 Gyr, we find lower limits on the
CO-to-H2 conversion factor alpha_CO in the range 10^2-10^4 Msun pc^-2 (K
km/s)^-1. The continuum emission is detected and resolved over the two main
super star clusters. Re-analysis of the IR-radio spectral energy distribution
suggests that the mm-fluxes are not only free-free emission but are most likely
also associated with a cold dust component coincident with the position of the
brightest cluster. With standard dust properties, we estimate its mass to be as
large as 10^5 Msun. Both line and continuum results suggest the presence of a
large cold gas reservoir unseen in CO even with ALMA.
[35]
oai:arXiv.org:1702.04063 [pdf] - 1535786
Thermal, Structural, and Optical Analysis of a Balloon-Based Imaging
System
Submitted: 2017-02-13
The Subarcsecond Telescope And BaLloon Experiment, STABLE, is the fine stage
of a guidance system for a high-altitude ballooning platform designed to
demonstrate subarcsecond pointing stability, over one minute using relatively
dim guide stars in the visible spectrum. The STABLE system uses an attitude
rate sensor and the motion of the guide star on a detector to control a Fast
Steering Mirror in order to stabilize the image. The characteristics of the
thermal-optical-mechanical elements in the system directly affect the quality
of the point spread function of the guide star on the detector, and so, a
series of thermal, structural, and optical models were built to simulate system
performance and ultimately inform the final pointing stability predictions.
This paper describes the modeling techniques employed in each of these
subsystems. The results from those models are discussed in detail, highlighting
the development of the worst-case cold and hot cases, the optical metrics
generated from the finite element model, and the expected STABLE residual
wavefront error and decenter. Finally, the paper concludes with the predicted
sensitivities in the STABLE system, which show that thermal deadbanding,
structural preloading and self-deflection under different loading conditions,
and the speed of individual optical elements were particularly important to the
resulting STABLE optical performance.
[36]
oai:arXiv.org:1701.08779 [pdf] - 1581318
Variable interstellar radiation fields in simulated dwarf galaxies:
supernovae versus photoelectric heating
Submitted: 2017-01-30
We present high-resolution hydrodynamical simulations of isolated dwarf
galaxies including self-gravity, non-equilibrium cooling and chemistry,
interstellar radiation fields (IRSF) and shielding, star formation, and stellar
feedback. This includes spatially and temporally varying photoelectric (PE)
heating, photoionization, resolved supernova (SN) blast waves and metal
enrichment. A new flexible method to sample the stellar initial mass function
allows us to follow the contribution to the ISRF, the metal output and the SN
delay times of individual massive stars. We find that SNe play the dominant
role in regulating the global star formation rate, shaping the multi-phase
interstellar medium (ISM) and driving galactic outflows. Outflow rates (with
mass-loading factors of a few) and hot gas fractions of the ISM increase with
the number of SNe exploding in low-density environments where radiative energy
losses are low. While PE heating alone can suppress star formation slightly
more (a factor of a few) than SNe alone can do, it is unable to drive outflows
and reproduce the multi-phase ISM that emerges naturally when SNe are included.
These results are in conflict with recent results of Forbes et al. who
concluded that PE heating is the dominant process suppressing star formation in
dwarfs, about an order of magnitude more efficient than SNe. Potential origins
for this discrepancy are discussed. In the absence of SNe and photoionization
(mechanisms to disperse dense clouds), the impact of PE heating is highly
overestimated owing to the (unrealistic) proximity of dense gas to the
radiation sources. This leads to a substantial boost of the infrared continuum
emission from the UV-irradiated dust and a far infrared line-to-continuum ratio
too low compared to observations. Though sub-dominant in regulating star
formation, the ISRF controls the abundance of molecular hydrogen via
photodissociation.
[37]
oai:arXiv.org:1611.02127 [pdf] - 1532471
Using CO line ratios to trace the physical properties of molecular
clouds
Submitted: 2016-11-07
The carbon monoxide (CO) rotational transition lines are the most common
tracers of molecular gas within giant molecular clouds (MCs). We study the
ratio ($R_{2-1/1-0}$) between CO's first two emission lines and examine what
information it provides about the physical properties of the cloud. To study
$R_{2-1/1-0}$ we perform smooth particle hydrodynamic simulations with time
dependent chemistry (using GADGET-2), along with post-process radiative
transfer calculations on an adaptive grid (using RADMC-3D) to create synthetic
emission maps of a MC. $R_{2-1/1-0}$ has a bimodal distribution that is a
consequence of the excitation properties of each line, given that $J=1$ reaches
local thermal equilibrium (LTE) while $J=2$ is still sub-thermally excited in
the considered clouds. The bimodality of $R_{2-1/1-0}$ serves as a tracer of
the physical properties of different regions of the cloud and it helps
constrain local temperatures, densities and opacities. Additionally this
bimodal structure shows an important portion of the CO emission comes from
diffuse regions of the cloud, suggesting that the commonly used conversion
factor of $R_{2-1/1-0}\sim 0.7$ between both lines may need to be studied
further.
[38]
oai:arXiv.org:1610.06579 [pdf] - 1551553
The turbulent life of dust grains in the supernova-driven, multi-phase
interstellar medium
Submitted: 2016-10-20
Dust grains are an important component of the interstellar medium (ISM) of
galaxies. We present the first direct measurement of the residence times of
interstellar dust in the different ISM phases, and of the transition rates
between these phases, in realistic hydrodynamical simulations of the
multi-phase ISM. Our simulations include a time-dependent chemical network that
follows the abundances of H^+, H, H_2, C^+ and CO and take into account
self-shielding by gas and dust using a tree-based radiation transfer method.
Supernova explosions are injected either at random locations, at density peaks,
or as a mixture of the two. For each simulation, we investigate how matter
circulates between the ISM phases and find more sizeable transitions than
considered in simple mass exchange schemes in the literature. The derived
residence times in the ISM phases are characterised by broad distributions, in
particular for the molecular, warm and hot medium. The most realistic
simulations with random and mixed driving have median residence times in the
molecular, cold, warm and hot phase around 17, 7, 44 and 1 Myr, respectively.
The transition rates measured in the random driving run are in good agreement
with observations of Ti gas-phase depletion in the warm and cold phases in a
simple depletion model, although the depletion in the molecular phase is
under-predicted. ISM phase definitions based on chemical abundance rather than
temperature cuts are physically more meaningful, but lead to significantly
different transition rates and residence times because there is no direct
correspondence between the two definitions.
[39]
oai:arXiv.org:1606.02324 [pdf] - 1460914
The role of cosmic ray pressure in accelerating galactic outflows
Submitted: 2016-06-07, last modified: 2016-08-16
We study the formation of galactic outflows from supernova explosions (SNe)
with the moving-mesh code AREPO in a stratified column of gas with a surface
density similar to the Milky Way disk at the solar circle. We compare different
simulation models for SNe placement and energy feedback, including cosmic rays
(CR), and find that models that place SNe in dense gas and account for CR
diffusion are able to drive outflows with similar mass loading as obtained from
a random placement of SNe with no CRs. Despite this similarity, CR-driven
outflows differ in several other key properties including their overall
clumpiness and velocity. Moreover, the forces driving these outflows originate
in different sources of pressure, with the CR diffusion model relying on
non-thermal pressure gradients to create an outflow driven by internal pressure
and the random-placement model depending on kinetic pressure gradients to
propel a ballistic outflow. CRs therefore appear to be non-negligible physics
in the formation of outflows from the interstellar medium.
[40]
oai:arXiv.org:1608.02502 [pdf] - 1451381
The design and development of a high-resolution visible-to-near-UV
telescope for balloon-borne astronomy: SuperBIT
Romualdez, L. Javier;
Benton, Steven J.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Hartley, John W.;
Jones, William C.;
Li, Lun;
Lipton, Leeav;
Luu, Thuy Vy T.;
Massey, Richard J.;
Netterfield, C. Barth;
Padilla, Ivan;
Rhodes, Jason D.;
Schmoll, Jürgen
Submitted: 2016-08-08
Balloon-borne astronomy is unique in that it allows for a level of image
stability, resolution, and optical backgrounds that are comparable to
space-borne systems due to greatly reduced atmospheric interference, but at a
fraction of the cost and over a significantly reduced development time-scale.
Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can
achieve a theoretical diffraction limited resolution of $0.01"$ from the
stratosphere ($35$ - $40$ km altitude) without the need for extensive adaptive
optical systems required by ground-based systems. The {\it Superpressure
Balloon-borne Imaging Telescope} ("SuperBIT") is a wide-field imager designed
to achieve 0.02$"$ stability over a 0.5$^\circ$ field-of-view, for deep single
exposures of up to 5 minutes. SuperBIT is thus well-suited for many
astronomical observations, from solar or extrasolar planetary observations, to
resolved stellar populations and distant galaxies (whether to study their
morphology, evolution, or gravitational lensing by foreground mass). We report
SuperBIT's design and implementation, emphasizing its two-stage real-time
stabilization: telescope stability to $1$ - $2"$ at the telescope level (a goal
surpassed during a test flight in September 2015) and image stability down to
$0.02"$ via an actuated tip-tilt mirror in the optical path (to be tested
during a flight in 2016). The project is progressing toward a fully
operational, three month flight from New Zealand by 2018
[41]
oai:arXiv.org:1608.01306 [pdf] - 1450036
The IMF as a function of supersonic turbulence
Submitted: 2016-08-03
Recent studies seem to suggest that the stellar initial mass function (IMF)
in early-type galaxies might be different from a classical Kroupa or Chabrier
IMF, i.e. contain a larger fraction of the total mass in low-mass stars. From a
theoretical point of view, supersonic turbulence has been the subject of
interest in many analytical theories proposing a strong correlation with the
characteristic mass of the core mass function (CMF) in star forming regions,
and as a consequence with the stellar IMF. Performing two suites of smoothed
particles hydrodynamics (SPH) simulations with different mass resolutions, we
aim at testing the effects of variations in the turbulent properties of a
dense, star forming molecular cloud on the shape of the system mass function in
different density regimes. While analytical theories predict a shift of the
peak of the CMF towards lower masses with increasing velocity dispersion of the
cloud, we observe in the low-density regime the opposite trend, with high Mach
numbers giving rise to a top-heavy mass distribution. For the high-density
regime we do not find any trend correlating the Mach number with the
characteristic mass of the resulting IMF, implying that the dynamics of
protostellar accretion discs and fragmentation on small scales is not strongly
affected by turbulence driven at the scale of the cloud. Furthermore, we
suggest that a significant fraction of dense cores are disrupted by turbulence
before stars can be formed in their interior through gravitational collapse.
Although this particular study has limitations in its numerical resolution, we
suggest that our results, along with those from other studies, cast doubt on
the turbulent fragmentation models on the IMF that simply map the CMF to the
IMF.
[42]
oai:arXiv.org:1606.05346 [pdf] - 1530852
The SILCC project: III. Regulation of star formation and outflows by
stellar winds and supernovae
Gatto, A.;
Walch, S.;
Naab, T.;
Girichidis, P.;
Wünsch, R.;
Glover, S. C. O.;
Klessen, R. S.;
Clark, P. C.;
Peters, T.;
Derigs, D.;
Baczynski, C.;
Puls, J.
Submitted: 2016-06-16
We study the impact of stellar winds and supernovae on the multi-phase
interstellar medium using three-dimensional hydrodynamical simulations carried
out with FLASH. The selected galactic disc region has a size of (500 pc)$^2$ x
$\pm$ 5 kpc and a gas surface density of 10 M$_{\odot}$/pc$^2$. The simulations
include an external stellar potential and gas self-gravity, radiative cooling
and diffuse heating, sink particles representing star clusters, stellar winds
from these clusters which combine the winds from indi- vidual massive stars by
following their evolution tracks, and subsequent supernova explosions. Dust and
gas (self-)shielding is followed to compute the chemical state of the gas with
a chemical network. We find that stellar winds can regulate star (cluster)
formation. Since the winds suppress the accretion of fresh gas soon after the
cluster has formed, they lead to clusters which have lower average masses
(10$^2$ - 10$^{4.3}$ M$_{\odot}$) and form on shorter timescales (10$^{-3}$ -
10 Myr). In particular we find an anti-correlation of cluster mass and
accretion time scale. Without winds the star clusters easily grow to larger
masses for ~5 Myr until the first supernova explodes. Overall the most massive
stars provide the most wind energy input, while objects beginning their
evolution as B-type stars contribute most of the supernova energy input. A
significant outflow from the disk (mass loading $\gtrsim$ 1 at 1 kpc) can be
launched by thermal gas pressure if more than 50% of the volume near the disc
mid-plane can be heated to T > 3x10$^5$ K. Stellar winds alone cannot create a
hot volume-filling phase. The models which are in best agreement with observed
star formation rates drive either no outflows or weak outflows.
[43]
oai:arXiv.org:1606.01851 [pdf] - 1457379
Soft X-Ray Excess from Shocked Accreting Plasma in Active Galactic
Nuclei
Submitted: 2016-06-06
We propose a novel theoretical model to describe a physical identity of the
soft X-ray excess, ubiquitously detected in many Seyfert galaxies, by
considering a steady-state, axisymmetric plasma accretion within the innermost
stable circular orbit (ISCO) around a black hole (BH) accretion disk. We extend
our earlier theoretical investigations on general relativistic
magnetohydrodynamic (GRMHD) accretion which has implied that the accreting
plasma can develop into a standing shock for suitable physical conditions
causing the downstream flow to be sufficiently hot due to shock compression. We
numerically calculate to examine, for sets of fiducial plasma parameters, a
physical nature of fast MHD shocks under strong gravity for different BH spins.
We show that thermal seed photons from the standard accretion disk can be
effectively Compton up-scattered by the energized sub-relativistic electrons in
the hot downstream plasma to produce the soft excess feature in X-rays. As a
case study, we construct a three-parameter Comptonization model of inclination
angle $\theta_{\rm obs}$, disk photon temperature $kT_{\rm in}$ and downstream
electron energy $kT_e$ to calculate the predicted spectra in comparison with a
60 ks {\it XMM-Newton}/EPIC-pn spectrum of a typical radio-quiet Seyfert 1 AGN,
Ark~120. Our $\chi^2$-analyses demonstrate that the model is plausible in
successfully describing data for both non-spinning and spinning BHs with the
derived range of $61.3~{\rm keV} \lesssim kT_e \lesssim 144.3~{\rm keV}$,
$21.6~{\rm eV} \lesssim kT_{\rm in} \lesssim 34.0~{\rm eV}$ and $17.5\degr
\lesssim \theta_{\rm obs} \lesssim 42.6\degr$ indicating a compact Comptonizing
region of $3-4$ gravitational radii that resembles the putative X-ray coronae.
[44]
oai:arXiv.org:1604.07609 [pdf] - 1436356
Evidence that widespread star formation may be underway in G0.253+016,
"The Brick"
Submitted: 2016-04-26
Image cubes of differential column density as a function of dust temperature
are constructed for Galactic Centre molecular cloud G0.253+0.016 ("The Brick")
using the recently described PPMAP procedure. The input data consist of
continuum images from the Herschel Space Telescope in the wavelength range
70-500 $\mu$m, supplemented by previously published interferometric data at 1.3
mm wavelength. While the bulk of the dust in the molecular cloud is consistent
with being heated externally by the local interstellar radiation field, our
image cube shows the presence, near one edge of the cloud, of a filamentary
structure whose temperature profile suggests internal heating. The structure
appears as a cool ($\sim 14$ K) tadpole-like feature, $\sim 6$ pc in length, in
which is embedded a thin spine of much hotter ($\sim$ 40-50 K) material. We
interpret these findings in terms of a cool filament whose hot central region
is undergoing gravitational collapse and fragmentation to form a line of
protostars. If confirmed, this would represent the first evidence of widespread
star formation having started within this cloud.
[45]
oai:arXiv.org:1603.07527 [pdf] - 1392956
Experience with wavefront sensor and deformable mirror interfaces for
wide-field adaptive optics systems
Basden, A. G.;
Atkinson, D.;
Bharmal, N. A.;
Bitenc, U.;
Brangier, M.;
Buey, T.;
Butterley, T.;
Cano, D.;
Chemla, F.;
Clark, P.;
Cohen, M.;
Conan, J. -M.;
de Cos, F. J.;
Dickson, C.;
Dipper, N. A.;
Dunlop, C. N.;
Feautrier, P.;
Fusco, T.;
Gach, J. L.;
Gendron, E.;
Geng, D.;
Goodsell, S. J.;
Gratadour, D.;
Greenaway, A. H.;
Guesalaga, A.;
Guzman, C. D.;
Henry, D.;
Holck, D.;
Hubert, Z.;
Huet, J. M.;
Kellerer, A.;
Kulcsar, C.;
Laporte, P.;
Roux, B. Le;
Looker, N.;
Longmore, A. J.;
Marteaud, M.;
Martin, O.;
Meimon, S.;
Morel, C.;
Morris, T. J.;
Myers, R. M.;
Osborn, J.;
Perret, D.;
Petit, C.;
Raynaud, H.;
Reeves, A. P.;
Rousset, G.;
Lasheras, F. Sanchez;
Rodriguez, M. Sanchez;
Santos, J. D.;
Sevin, A.;
Sivo, G.;
Stadler, E.;
Stobie, B.;
Talbot, G.;
Todd, S.;
Vidal, F.;
Younger, E. J.
Submitted: 2016-03-24
Recent advances in adaptive optics (AO) have led to the implementation of
wide field-of-view AO systems. A number of wide-field AO systems are also
planned for the forthcoming Extremely Large Telescopes. Such systems have
multiple wavefront sensors of different types, and usually multiple deformable
mirrors (DMs).
Here, we report on our experience integrating cameras and DMs with the
real-time control systems of two wide-field AO systems. These are CANARY, which
has been operating on-sky since 2010, and DRAGON, which is a laboratory
adaptive optics real-time demonstrator instrument. We detail the issues and
difficulties that arose, along with the solutions we developed. We also provide
recommendations for consideration when developing future wide-field AO systems.
[46]
oai:arXiv.org:1510.05644 [pdf] - 1378651
Star formation and molecular hydrogen in dwarf galaxies: a
non-equilibrium view
Submitted: 2015-10-19, last modified: 2016-03-07
We study the connection of star formation to atomic (HI) and molecular
hydrogen (H$_2$) in isolated, low metallicity dwarf galaxies with
high-resolution ($m_{\rm gas}$ = 4 M$_\odot$, $N_{\rm ngb}$ = 100) SPH
simulations. The model includes self-gravity, non-equilibrium cooling,
shielding from an interstellar radiation field, the chemistry of H$_2$
formation, H$_2$-independent star formation, supernova feedback and metal
enrichment. We find that the H$_2$ mass fraction is sensitive to the adopted
dust-to-gas ratio and the strength of the interstellar radiation field, while
the star formation rate is not. Star formation is regulated by stellar
feedback, keeping the gas out of thermal equilibrium for densities $n <$ 1
cm$^{-3}$. Because of the long chemical timescales, the H$_2$ mass remains out
of chemical equilibrium throughout the simulation. Star formation is
well-correlated with cold ( T $\leqslant$ 100 K ) gas, but this dense and cold
gas - the reservoir for star formation - is dominated by HI, not H$_2$. In
addition, a significant fraction of H$_2$ resides in a diffuse, warm phase,
which is not star-forming. The ISM is dominated by warm gas (100 K $<$ T
$\leqslant 3\times 10^4$ K) both in mass and in volume. The scale height of the
gaseous disc increases with radius while the cold gas is always confined to a
thin layer in the mid-plane. The cold gas fraction is regulated by feedback at
small radii and by the assumed radiation field at large radii. The decreasing
cold gas fractions result in a rapid increase in depletion time (up to 100
Gyrs) for total gas surface densities $\Sigma_{\rm HI+H_2} \lesssim$ 10
M$_\odot$pc$^{-2}$, in agreement with observations of dwarf galaxies in the
Kennicutt-Schmidt plane.
[47]
oai:arXiv.org:1603.01161 [pdf] - 1368246
Precise Pointing and Stabilization Performance for the Balloon-borne
Imaging Testbed (BIT): 2015 Test Flight
Submitted: 2016-03-03
Balloon-borne astronomy offers an attractive option for experiments that
require precise pointing and attitude stabilization, due to a large reduction
in the atmospheric interference observed by ground-based systems as well as the
low-cost and short development time-scale compared to space-borne systems. The
Balloon-borne Imaging Testbed (BIT) is an instrument designed to meet the
technological requirements of high precision astronomical missions and is a
precursor to the development of a facility class instrument with capabilities
similar to the Hubble Space Telescope. The attitude determination and control
systems (ADCS) for BIT, the design, implementation, and analysis of which are
the focus of this paper, compensate for compound pendulation effects and other
sub-orbital disturbances in the stratosphere to within 1-2$^{\prime\prime}$
(rms), while back-end optics provide further image stabilization down to
0.05$^{\prime\prime}$ (not discussed here). During the inaugural test flight
from Timmins, Canada in September 2015, BIT ADCS pointing and stabilization
performed exceptionally, with coarse pointing and target acquisition to within
< 0.1$^\circ$ and fine stabilization to 0.68$^{\prime\prime}$ (rms) over long
(10-30 minute) integrations. This level of performance was maintained during
flight for several tracking runs that demonstrated pointing stability on the
sky for more than an hour at a time. To refurbish and improve the system for
the three-month flight from New Zealand in 2018, certain modifications to the
ADCS need to be made to smooth pointing mode transitions and to correct for
internal biases observed during the test flight. Furthermore, the level of
autonomy must be increased for future missions to improve system reliability
and robustness.
[48]
oai:arXiv.org:1509.07247 [pdf] - 1338968
Launching cosmic-ray-driven outflows from the magnetized interstellar
medium
Girichidis, Philipp;
Naab, Thorsten;
Walch, Stefanie;
Hanasz, Michal;
Mac Low, Mordecai-Mark;
Ostriker, Jeremiah P.;
Gatto, Andrea;
Peters, Thomas;
Wünsch, Richard;
Glover, Simon C. O.;
Klessen, Ralf S.;
Clark, Paul C.;
Baczynski, Christian
Submitted: 2015-09-24, last modified: 2016-01-06
We present a hydrodynamical simulation of the turbulent, magnetized,
supernova (SN)-driven interstellar medium (ISM) in a stratified box that
dynamically couples the injection and evolution of cosmic rays (CRs) and a
self-consistent evolution of the chemical composition. CRs are treated as a
relativistic fluid in the advection-diffusion approximation. The thermodynamic
evolution of the gas is computed using a chemical network that follows the
abundances of H+, H, H2, CO, C+, and free electrons and includes
(self-)shielding of the gas and dust. We find that CRs perceptibly thicken the
disk with the heights of 90% (70%) enclosed mass reaching ~1.5 kpc (~0.2 kpc).
The simulations indicate that CRs alone can launch and sustain strong outflows
of atomic and ionized gas with mass loading factors of order unity, even in
solar neighborhood conditions and with a CR energy injection per SN of 10^50
erg, 10% of the fiducial thermal energy of an SN. The CR-driven outflows have
moderate launching velocities close to the midplane (~100 km/s) and are denser
(\rho~1e-24 - 1e-26 g/cm^3), smoother, and colder than the (thermal) SN-driven
winds. The simulations support the importance of CRs for setting the vertical
structure of the disk as well as the driving of winds.
[49]
oai:arXiv.org:1601.00937 [pdf] - 1370319
Distribution and mass of diffuse and dense CO gas in the Milky Way
Submitted: 2016-01-05
Emission from carbon monoxide (CO) is ubiquitously used as a tracer of dense
star forming molecular clouds. There is, however, growing evidence that a
significant fraction of CO emission originates from diffuse molecular gas.
Quantifying the contribution of diffuse CO-emitting gas is vital for
understanding the relation between molecular gas and star formation. We examine
the Galactic distribution of two CO-emitting gas components, a high column
density component detected in 13CO and 12CO, and a low column density component
detected in 12CO, but not in 13CO. The "diffuse" and "dense" components are
identified using a combination of smoothing, masking, and erosion/dilation
procedures, making use of three large-scale 12CO and 13CO surveys of the Inner
and Outer Milky Way. The diffuse component, which globally represents 25
(1.5x1e8 Mo) of the total molecular gas mass (6.5x1e8 Mo), is more extended
perpendicular to the Galactic plane. The fraction of diffuse gas increases from
15% at a galactocentric radius of 3 kpc to 50% at 15 kpc, and increases with
decreasing surface density. In the Inner Galaxy, a yet denser component traced
by CS emission represents 14% of the total molecular gas mass traced by 12CO
emission. Only 14% of the molecular gas mass traced by 12CO emission is
identified as part of molecular clouds in 12CO surveys by cloud identification
algorithms. This study indicates that CO emission not only traces star forming
clouds, but also a significant diffuse molecular ISM component.
[50]
oai:arXiv.org:1508.06646 [pdf] - 1342816
The SILCC (SImulating the LifeCycle of molecular Clouds) project - II.
Dynamical evolution of the supernova-driven ISM and the launching of outflows
Girichidis, Philipp;
Walch, Stefanie;
Naab, Thorsten;
Gatto, Andrea;
Wünsch, Richard;
Glover, Simon C. O.;
Klessen, Ralf S.;
Clark, Paul C.;
Peters, Thomas;
Derigs, Dominik;
Baczynski, Christian
Submitted: 2015-08-26, last modified: 2015-12-11
The SILCC project (SImulating the Life-Cycle of molecular Clouds) aims at a
more self-consistent understanding of the interstellar medium (ISM) on small
scales and its link to galaxy evolution. We present three-dimensional
(magneto)hydrodynamic simulations of the ISM in a vertically stratified box
including self-gravity, an external potential due to the stellar component of
the galactic disc, and stellar feedback in the form of an interstellar
radiation field and supernovae (SNe). The cooling of the gas is based on a
chemical network that follows the abundances of H+, H, H2, C+, and CO and takes
shielding into account consistently. We vary the SN feedback by comparing
different SN rates, clustering and different positioning, in particular SNe in
density peaks and at random positions, which has a major impact on the
dynamics. Only for random SN positions the energy is injected in sufficiently
low-density environments to reduce energy losses and enhance the effective
kinetic coupling of the SNe with the gas. This leads to more realistic velocity
dispersions (\sigma_HI ~ 0.8\sigma_(300-8000K) ~ 10-20km/s, \sigma_H\alpha ~
0.6\sigma_(8000-3e5K) ~ 20-30km/s), and strong outflows with mass loading
factors of up to 10 even for solar neighbourhood conditions. Clustered SNe abet
the onset of outflows compared to individual SNe but do not influence the net
outflow rate. The outflows do not contain any molecular gas and are mainly
composed of atomic hydrogen. The bulk of the outflowing mass is dense (\rho ~
1e-25-1e-24g/cc) and slow (v ~ 20-40km/s) but there is a high-velocity tail of
up to v ~ 500km/s with \rho ~ 1e-28-1e-27g/cc.
[51]
oai:arXiv.org:1509.01939 [pdf] - 1342832
Is atomic carbon a good tracer of molecular gas in metal-poor galaxies?
Submitted: 2015-09-07, last modified: 2015-12-04
Carbon monoxide (CO) is widely used as a tracer of molecular hydrogen (H2) in
metal-rich galaxies, but is known to become ineffective in low metallicity
dwarf galaxies. Atomic carbon has been suggested as a superior tracer of H2 in
these metal-poor systems, but its suitability remains unproven. To help us to
assess how well atomic carbon traces H2 at low metallicity, we have performed a
series of numerical simulations of turbulent molecular clouds that cover a wide
range of different metallicities. Our simulations demonstrate that in
star-forming clouds, the conversion factor between [CI] emission and H2 mass,
$X_{\rm CI}$, scales approximately as $X_{\rm CI} \propto Z^{-1}$. We recover a
similar scaling for the CO-to-H2 conversion factor, $X_{\rm CO}$, but find that
at this point in the evolution of the clouds, $X_{\rm CO}$ is consistently
smaller than $X_{\rm CI}$, by a factor of a few or more. We have also examined
how $X_{\rm CI}$ and $X_{\rm CO}$ evolve with time. We find that $X_{\rm CI}$
does not vary strongly with time, demonstrating that atomic carbon remains a
good tracer of H2 in metal-poor systems even at times significantly before the
onset of star formation. On the other hand, $X_{\rm CO}$ varies very strongly
with time in metal-poor clouds, showing that CO does not trace H2 well in
starless clouds at low metallicity.
[52]
oai:arXiv.org:1511.04689 [pdf] - 1415005
Hunting for the signatures of molecular cloud formation
Submitted: 2015-11-15
In order to understand how molecular clouds form in the Galactic interstellar
medium, we would like to be able to map the structure and kinematics of the gas
flows responsible for forming them. However, doing so is observationally
challenging. CO, the workhorse molecule for studies of molecular clouds, traces
only relatively dense gas and hence only allows us to study those portions of
the clouds that have already assembled. Numerical simulations suggest that the
inflowing gas that forms these clouds is largely composed of CO-dark H2. These
same simulations allow us to explore the usefulness of different tracers of
this CO-dark molecular material, and we use them here to show that the [CII]
fine structure line is potentially a very powerful tracer of this gas and
should be readily detectable using modern instrumentation.
[53]
oai:arXiv.org:1509.06649 [pdf] - 1483217
Synthetic observations of molecular clouds in a galactic center
environment: I. Studying maps of column density and integrated intensity
Submitted: 2015-09-21, last modified: 2015-11-04
We run numerical simulations of molecular clouds (MCs), adopting properties
similar to those found in the Central Molecular Zone (CMZ) of the Milky Way.
For this, we employ the moving mesh code Arepo and perform simulations which
account for a simplified treatment of time-dependent chemistry and the
non-isothermal nature of gas and dust. We perform simulations using an initial
density of n_0 = 10^3 cm^{-3} and a mass of 1.3x10^5 M_sun. Furthermore, we
vary the virial parameter, defined as the ratio of kinetic and potential
energy, alpha = E_{kin} / |E_{pot}|, by adjusting the velocity dispersion. We
set it to alpha = 0.5, 2.0 and 8.0, in order to analyze the impact of the
kinetic energy on our results. We account for the extreme conditions in the CMZ
and increase both the interstellar radiation field (ISRF) and the cosmic-ray
flux (CRF) by a factor of 1000 compared to the values found in the solar
neighbourhood. We use the radiative transfer code RADMC-3D to compute synthetic
images in various diagnostic lines. These are [CII] at 158 micron, [OI] (145
micron), [OI] (63 micron), 12CO (J = 1 -> 0) and 13CO (J = 1 -> 0) at 2600
micron and 2720 micron, respectively. When alpha is large, the turbulence
disperses much of the gas in the cloud, reducing its mean density and allowing
the ISRF to penetrate more deeply into the cloud's interior. This significantly
alters the chemical composition of the cloud, leading to the dissociation of a
significant amount of the molecular gas. On the other hand, when alpha is
small, the cloud remains compact, allowing more of the molecular gas to
survive. We show that in each case the atomic tracers accurately reflect most
of the physical properties of both the H2 and the total gas of the cloud and
that they provide a useful alternative to molecular lines when studying the ISM
in the CMZ.
[54]
oai:arXiv.org:1510.06563 [pdf] - 1305703
Impact of supernova and cosmic-ray driving on the surface brightness of
the galactic halo in soft X-rays
Peters, Thomas;
Girichidis, Philipp;
Gatto, Andrea;
Naab, Thorsten;
Walch, Stefanie;
Wünsch, Richard;
Glover, Simon C. O.;
Clark, Paul C.;
Klessen, Ralf S.;
Baczynski, Christian
Submitted: 2015-10-22
The halo of the Milky Way contains a hot plasma with a surface brightness in
soft X-rays of the order $10^{-12}$erg cm$^{-2}$ s$^{-1}$ deg$^{-2}$. The
origin of this gas is unclear, but so far numerical models of galactic star
formation have failed to reproduce such a large surface brightness by several
orders of magnitude. In this paper, we analyze simulations of the turbulent,
magnetized, multi-phase interstellar medium including thermal feedback by
supernova explosions as well as cosmic-ray feedback. We include a
time-dependent chemical network, self-shielding by gas and dust, and
self-gravity. Pure thermal feedback alone is sufficient to produce the observed
surface brightness, although it is very sensitive to the supernova rate. Cosmic
rays suppress this sensitivity and reduce the surface brightness because they
drive cooler outflows. Self-gravity has by far the largest effect because it
accumulates the diffuse gas in the disk in dense clumps and filaments, so that
supernovae exploding in voids can eject a large amount of hot gas into the
halo. This can boost the surface brightness by several orders of magnitude.
Although our simulations do not reach a steady state, all simulations produce
surface brightness values of the same order of magnitude as the observations,
with the exact value depending sensitively on the simulation parameters. We
conclude that star formation feedback alone is sufficient to explain the origin
of the hot halo gas, but measurements of the surface brightness alone do not
provide useful diagnostics for the study of galactic star formation.
[55]
oai:arXiv.org:1506.06503 [pdf] - 1259053
Does the CO-to-H2 conversion factor depend on the star formation rate?
Submitted: 2015-06-22
We present a series of numerical simulations that explore how the `X-factor',
$X_{CO}$ -- the conversion factor between the observed integrated CO emission
and the column density of molecular hydrogen -- varies with the environmental
conditions in which a molecular cloud is placed. Our investigation is centred
around two environmental conditions in particular: the cosmic ray ionisation
rate (CRIR) and the strength of the interstellar radiation field (ISRF). Since
both these properties of the interstellar medium have their origins in massive
stars, we make the assumption in this paper that both the strength of the ISRF
and the CRIR scale linearly with the local star formation rate (SFR). The cloud
modelling in this study first involves running numerical simulations that
capture the cloud dynamics, as well as the time-dependent chemistry, and ISM
heating and cooling. These simulations are then post-processed with a line
radiative transfer code to create synthetic 12CO (1-0) emission maps from which
$X_{CO}$ can be calculated. We find that for 1e4 solar mass virialised clouds
with mean density 100 cm$^{-3}$, $X_{CO}$ is only weakly dependent on the local
SFR, varying by a factor of a few over two orders of magnitude in SFR. In
contrast, we find that for similar clouds but with masses of 1e5 solar masses,
the X-factor will vary by an order of magnitude over the same range in SFR,
implying that extra-galactic star formation laws should be viewed with caution.
However, for denser ($10^4$ cm$^{-3}$), super-virial clouds such as those found
at the centre of the Milky Way, the X-factor is once again independent of the
local SFR.
[56]
oai:arXiv.org:1505.04403 [pdf] - 1483206
Star formation efficiencies of molecular clouds in a galactic center
environment
Submitted: 2015-05-17, last modified: 2015-06-01
We use the Arepo moving mesh code to simulate the evolution of molecular
clouds exposed to a harsh environment similar to that found in the galactic
center (GC), in an effort to understand why the star formation efficiency (SFE)
of clouds in this environment is so small. Our simulations include a simplified
treatment of time-dependent chemistry and account for the highly non-isothermal
nature of the gas and the dust. We model clouds with a total mass of 1.3x10^5
M_{sun} and explore the effects of varying the mean cloud density and the
virial parameter, alpha = E_{kin}/|E_{pot}|. We vary the latter from alpha =
0.5 to alpha = 8.0, and so many of the clouds that we simulate are
gravitationally unbound. We expose our model clouds to an interstellar
radiation field (ISRF) and cosmic ray flux (CRF) that are both a factor of 1000
higher than the values found in the solar neighbourhood. As a reference, we
also run simulations with local solar neighbourhood values of the ISRF and the
CRF in order to better constrain the effects of the extreme conditions in the
GC on the SFE. Despite the harsh environment and the large turbulent velocity
dispersions adopted, we find that all of the simulated clouds form stars within
less than a gravitational free-fall time. Increasing the virial parameter from
alpha = 0.5 to alpha = 8.0 decreases the SFE by a factor ~4-10, while
increasing the ISRF/CRF by a factor of 1000 decreases the SFE again by a factor
~2-6. However, even in our most unbound clouds, the SFE remains higher than
that inferred for real GC clouds. We therefore conclude that high levels of
turbulence and strong external heating are not enough by themselves to lead to
a persistently low SFE at the center of the Galaxy.
[57]
oai:arXiv.org:1504.05963 [pdf] - 1232202
TOPoS: II. On the bimodality of carbon abundance in CEMP stars.
Implications on the early chemical evolution of galaxies
Bonifacio, P.;
Caffau, E.;
Spite, M.;
Limongi, M.;
Chieffi, A.;
Klessen, R. S.;
François, P.;
Molaro, P.;
Ludwig, H. G.;
Zaggia, S.;
Spite, F.;
Plez, B.;
Cayrel, R.;
Christlieb, N.;
Clark, P. C.;
Glover, S. C. O.;
Hammer, F.;
Koch, A.;
Monaco, L.;
Sbordone, L.;
Steffen, M.
Submitted: 2015-04-22
In the course of the TOPoS (Turn Off Primordial Stars) survey, aimed at
discovering the lowest metallicity stars, we have found several carbon-enhanced
metal-poor (CEMP) stars. We here present our analysis of six CEMP stars.
Calcium and carbon are the only elements that can be measured in all six stars.
The range is -5.0<=[Ca/H]< -2.1 and 7.12<=A(C)<=8.65. For star SDSS J1742+2531
we were able to detect three FeI lines from which we deduced [Fe/H]=-4.80, from
four CaII lines we derived [Ca/H]=-4.56, and from synthesis of the G-band we
derived A(C)=7.26. For SDSS J1035+0641 we were not able to detect any iron
lines, yet we could place a robust (3sigma) upper limit of [Fe/H]< -5.0 and
measure the Ca abundance, with [Ca/H]=-5.0, and carbon, A(C)=6.90. No lithium
is detected in the spectrum of SDSS J1742+2531 or SDSS J1035+0641, which
implies a robust upper limit of A(Li)<1.8 for both stars. Our measured carbon
abundances confirm the bimodal distribution of carbon in CEMP stars,
identifying a high-carbon band and a low-carbon band. We propose an
interpretation of this bimodality according to which the stars on the
high-carbon band are the result of mass transfer from an AGB companion, while
the stars on the low-carbon band are genuine fossil records of a gas cloud that
has also been enriched by a faint supernova (SN) providing carbon and the
lighter elements. (Abridged)
[58]
oai:arXiv.org:1503.08932 [pdf] - 1043190
The role of 3-body H$_2$ formation in the fragmentation of primordial
gas
Submitted: 2015-03-31
It has been shown that the behaviour of primordial gas collapsing in a dark
matter minihalo can depend on the adopted choice of 3-body H$_2$ formation
rate. The uncertainties in this rate span two orders of magnitude in the
current literature, and so it remains a source of uncertainty in our knowledge
of population III star formation. Here we investigate how the amount of
fragmentation in primordial gas depends on the adopted 3-body rate. We present
the results of calculations that follow the chemical and thermal evolution of
primordial gas as it collapses in two dark matter minihalos. Our results on the
effect of 3-body rate on the evolution until the first protostar forms agree
well with previous studies. However, our modified version of GADGET-2 SPH also
includes sink particles, which allows us to follow the initial evolution of the
accretion disc that builds up on the centre of each halo, and capture the
fragmentation in gas as well as its dependence on the adopted 3-body H$_2$
formation rate. We find that the fragmentation behaviour of the gas is only
marginally effected by the choice of 3-body rate co-efficient, and that
halo-to-halo differences are of equal importance in affecting the final mass
distribution of stars.
[59]
oai:arXiv.org:1409.4780 [pdf] - 951797
The Visible and Infrared Survey Telescope for Astronomy (VISTA): Design,
Technical Overview and Performance
Sutherland, Will;
Emerson, Jim;
Dalton, Gavin;
Atad-Ettedgui, Eli;
Beard, Steven;
Bennett, Richard;
Bezawada, Naidu;
Born, Andrew;
Caldwell, Martin;
Clark, Paul;
Craig, Simon;
Henry, David;
Jeffers, Paul;
Little, Bryan;
McPherson, Alistair;
Murray, John;
Stewart, Malcolm;
Stobie, Brian;
Terrett, David;
Ward, Kim;
Whalley, Martin;
Woodhouse, Guy
Submitted: 2014-09-16, last modified: 2015-03-11
The Visible and Infrared Survey Telescope for Astronomy (VISTA) is the
4-metre wide-field survey telescope at ESO's Paranal Observatory, equipped with
the world's largest near-infrared imaging camera (VISTA IR Camera, VIRCAM),
with 1.65 degree diameter field of view, and 67 Mpixels giving 0.6 square
degrees active pixel area, operating at wavelengths 0.8 - 2.3 microns. We
provide a short history of the project, and an overview of the technical
details of the full system including the optical design, mirrors, telescope
structure, IR camera, active optics, enclosure and software. The system
includes several innovative design features such as the f/1 primary mirror, the
dichroic cold-baffle camera design and the sophisticated wavefront sensing
system delivering closed-loop 5-axis alignment of the secondary mirror. We
conclude with a summary of the delivered performance, and a short overview of
the six ESO public surveys in progress on VISTA.
[60]
oai:arXiv.org:1411.0009 [pdf] - 1222924
Modelling the supernova-driven ISM in different environments
Gatto, A.;
Walch, S.;
Mac Low, M. -M.;
Naab, T.;
Girichidis, P.;
Glover, S. C. O.;
Wünsch, R.;
Klessen, R. S.;
Clark, P. C.;
Baczynski, C.;
Peters, T.;
Ostriker, J. P.;
Ibáñez-Mejía, J. C.;
Haid, S.
Submitted: 2014-10-31, last modified: 2015-03-08
We use hydrodynamical simulations in a $(256\;{\rm pc})^3$ periodic box to
model the impact of supernova (SN) explosions on the multi-phase interstellar
medium (ISM) for initial densities $n = 0.5-30$ cm$^{-3}$ and SN rates $1-720$
Myr$^{-1}$. We include radiative cooling, diffuse heating, and the formation of
molecular gas using a chemical network. The SNe explode either at random
positions, at density peaks, or both. We further present a model combining
thermal energy for resolved and momentum input for unresolved SNe. Random
driving at high SN rates results in hot gas ($T\gtrsim 10^6$ K) filling $> 90$%
of the volume. This gas reaches high pressures ($10^4 < P/k_\mathrm{B} < 10^7$
K cm$^{-3}$) due to the combination of SN explosions in the hot, low density
medium and confinement in the periodic box. These pressures move the gas from a
two-phase equilibrium to the single-phase, cold branch of the cooling curve.
The molecular hydrogen dominates the mass ($>50$%), residing in small, dense
clumps. Such a model might resemble the dense ISM in high-redshift galaxies.
Peak driving results in huge radiative losses, producing a filamentary ISM with
virtually no hot gas, and a small molecular hydrogen mass fraction ($\ll 1$%).
Varying the ratio of peak to random SNe yields ISM properties in between the
two extremes, with a sharp transition for equal contributions. The velocity
dispersion in HI remains $\lesssim 10$ km s$^{-1}$ in all cases. For peak
driving the velocity dispersion in H$_\alpha$ can be as high as $70$ km
s$^{-1}$ due to the contribution from young, embedded SN remnants.
[61]
oai:arXiv.org:1403.3530 [pdf] - 1208386
Modelling [CI] emission from turbulent molecular clouds
Submitted: 2014-03-14, last modified: 2015-01-29
We use detailed numerical simulations of the coupled chemical, thermal and
dynamical evolution of the gas in a turbulent molecular cloud to study the
usefulness of the [CI] 609 micron and 370 micron fine structure emission lines
as tracers of cloud structure. Emission from these lines is observed throughout
molecular clouds, and yet the question of what we can learn from them about the
physics of the clouds remains largely unexplored.
We show that the fact that [CI] emission is widespread within molecular
clouds is a simple consequence of the fact that the clouds are dominated by
turbulent motions. Turbulence creates large density inhomogeneities, allowing
radiation to penetrate deeply into the clouds. As a result, [CI] emitting gas
is found throughout the cloud, rather than being concentrated at the edges. We
examine how well we can use [CI] emission to trace the structure of the cloud,
and show that the integrated intensity of the 609 micron line traces column
density accurately over a wide range of visual extinctions. For extinctions
greater than a few, [CI] and 13CO both perform well, but [CI] becomes a
superior tracer of column densities for visual extinctions A_V <= 3
We have also studied the distribution of [CI] excitation temperatures in the
gas, and show that these are typically smaller than the kinetic temperature,
indicating that most of the carbon atoms are not in local thermodynamic
equilibrium. We discuss how best to determine T_ex from observations of the
[CI] lines, and how to use these values to estimate the column density of
neutral atomic carbon. We show that even in the best case, we tend to
systematically underestimate the atomic carbon content of the gas. Our results
suggest that observationally-derived estimates of the atomic carbon content of
real GMCs could be in error by as much as a factor of two.
[62]
oai:arXiv.org:1412.2749 [pdf] - 1284734
The SILCC (SImulating the LifeCycle of molecular Clouds) project: I.
Chemical evolution of the supernova-driven ISM
Walch, S. K.;
Girichidis, P.;
Naab, T.;
Gatto, A.;
Glover, S. C. O.;
Wünsch, R.;
Klessen, R. S;
Clark, P. C.;
Peters, T.;
Baczynski, C.
Submitted: 2014-12-08
The SILCC project (SImulating the Life-Cycle of molecular Clouds) aims at a
more self-consistent understanding of the interstellar medium (ISM) on small
scales and its link to galaxy evolution. We simulate the evolution of the
multi-phase ISM in a 500 pc x 500 pc x 10 kpc region of a galactic disc, with a
gas surface density of $\Sigma_{_{\rm GAS}} = 10 \;{\rm M}_\odot/{\rm pc}^2$.
The Flash 4.1 simulations include an external potential, self-gravity, magnetic
fields, heating and radiative cooling, time-dependent chemistry of H$_2$ and CO
considering (self-) shielding, and supernova (SN) feedback. We explore SN
explosions at different (fixed) rates in high-density regions (peak), in random
locations (random), in a combination of both (mixed), or clustered in space and
time (clustered). Only random or clustered models with self-gravity (which
evolve similarly) are in agreement with observations. Molecular hydrogen forms
in dense filaments and clumps and contributes 20% - 40% to the total mass,
whereas most of the mass (55% - 75%) is in atomic hydrogen. The ionised gas
contributes <10%. For high SN rates (0.5 dex above Kennicutt-Schmidt) as well
as for peak and mixed driving the formation of H$_2$ is strongly suppressed.
Also without self-gravity the H$_2$ fraction is significantly lower ($\sim$
5%). Most of the volume is filled with hot gas ($\sim$90% within $\pm$2 kpc).
Only for random or clustered driving, a vertically expanding warm component of
atomic hydrogen indicates a fountain flow. Magnetic fields have little impact
on the final disc structure. However, they affect dense gas ($n\gtrsim 10\;{\rm
cm}^{-3}$) and delay H$_2$ formation. We highlight that individual chemical
species, in particular atomic hydrogen, populate different ISM phases and
cannot be accurately accounted for by simple temperature-/density-based phase
cut-offs.
[63]
oai:arXiv.org:1407.2102 [pdf] - 987769
A new approach to determine optically thick H2 cooling and its effect on
primordial star formation
Submitted: 2014-07-02, last modified: 2014-11-19
We present a new method for estimating the H2 cooling rate in the optically
thick regime in simulations of primordial star formation. Our new approach is
based on the TreeCol algorithm, which projects matter distributions onto a
spherical grid to create maps of column densities for each fluid element in the
computational domain. We have improved this algorithm by using the relative gas
velocities, to weight the individual matter contributions with the relative
spectral line overlaps, in order to properly account for the Doppler effect. We
compare our new method to the widely used Sobolev approximation, which yields
an estimate for the column density based on the local velocity gradient and the
thermal velocity. This approach generally underestimates the photon escape
probability, because it neglects the density gradient and the actual shape of
the cloud. We present a correction factor for the true line overlap in the
Sobolev approximation and a new method based on local quantities, which fits
the exact results reasonably well during the collapse of the cloud, with the
error in the cooling rates always being less than 10%. Analytical fitting
formulae fail at determining the photon escape probability after formation of
the first protostar (error of 40%) because they are based on the assumption of
spherical symmetry and therefore break down once a protostellar accretion disc
has formed. Our method yields lower temperatures and hence promotes
fragmentation for densities above 10^{10}/ccm at a distance of 200AU from the
first protostar. Since the overall accretion rates are hardly affected by the
cooling implementation, we expect Pop III stars to have lower masses in our
simulations, compared to the results of previous simulations that used the
Sobolev approximation.
[64]
oai:arXiv.org:1306.5714 [pdf] - 1172254
On column density thresholds and the star formation rate
Submitted: 2013-06-24, last modified: 2014-09-01
We present the results of a numerical study designed to address the question
of whether there is a column density threshold for star formation within
molecular clouds. We have simulated a large number of different clouds, with
volume and column densities spanning a wide range of different values, using a
state-of-the-art model for the coupled chemical, thermal and dynamical
evolution of the gas. We show that star formation is only possible in regions
where the mean (area-averaged) column density exceeds $10^{21} \: {\rm
cm^{-2}}$. Within the clouds, we also show that there is a good correlation
between the mass of gas above a K-band extinction $A_{\rm K} = 0.8$ and the
star formation rate (SFR), in agreement with recent observational work.
Previously, this relationship has been explained in terms of a correlation
between the SFR and the mass in dense gas. However, we find that this
correlation is weaker and more time-dependent than that between the SFR and the
column density. In support of previous studies, we argue that dust shielding is
the key process: the true correlation is one between the SFR and the mass in
cold, well-shielded gas, and the latter correlates better with the column
density than the volume density.
[65]
oai:arXiv.org:1408.6529 [pdf] - 864023
Characterization of a commercial, front-illuminated interline transfer
CCD camera for use as a guide camera on a balloon-borne telescope
Clark, Paul;
Massey, Richard;
Chang, Herrick L.;
Galloway, Mathew;
Israel, Holger;
Jones, Laura L.;
Li, Lun;
Mandic, Milan;
Morris, Tim;
Netterfield, Barth;
Peacock, John;
Sharples, Ray;
Susca, Sara
Submitted: 2014-08-27
We report results obtained during the characterization of a commercial
front-illuminated progressive scan interline transfer CCD camera. We
demonstrate that the unmodified camera operates successfully in temperature and
pressure conditions (-40C, 4mBar) representative of a high altitude balloon
mission. We further demonstrate that the centroid of a well-sampled star can be
determined to better than 2% of a pixel, even though the CCD is equipped with a
microlens array. This device has been selected for use in a closed-loop
star-guiding and tip-tilt correction system in the BIT-STABLE balloon mission.
[66]
oai:arXiv.org:1312.5326 [pdf] - 1202358
The Origin and Universality of the Stellar Initial Mass Function
Submitted: 2013-12-18, last modified: 2014-05-19
We review current theories for the origin of the Stellar Initial Mass
Function (IMF) with particular focus on the extent to which the IMF can be
considered universal across various environments. To place the issue in an
observational context, we summarize the techniques used to determine the IMF
for different stellar populations, the uncertainties affecting the results, and
the evidence for systematic departures from universality under extreme
circumstances. We next consider theories for the formation of prestellar cores
by turbulent fragmentation and the possible impact of various thermal,
hydrodynamic and magneto-hydrodynamic instabilities. We address the conversion
of prestellar cores into stars and evaluate the roles played by different
processes: competitive accretion, dynamical fragmentation, ejection and
starvation, filament fragmentation and filamentary accretion flows, disk
formation and fragmentation, critical scales imposed by thermodynamics, and
magnetic braking. We present explanations for the characteristic shapes of the
Present-Day Prestellar Core Mass Function and the IMF and consider what
significance can be attached to their apparent similarity. Substantial
computational advances have occurred in recent years, and we review the
numerical simulations that have been performed to predict the IMF directly and
discuss the influence of dynamics, time-dependent phenomena, and initial
conditions.
[67]
oai:arXiv.org:1405.4018 [pdf] - 839555
Statistical properties of dark matter mini-haloes at z >= 15
Submitted: 2014-05-15
Understanding the formation of the first objects in the universe critically
depends on knowing whether the properties of small dark matter structures at
high-redshift (z > 15) are different from their more massive lower-redshift
counterparts. To clarify this point, we performed a high-resolution N-body
simulation of a cosmological volume 1 Mpc/h comoving on a side, reaching the
highest mass resolution to date in this regime. We make precision measurements
of various physical properties that characterize dark matter haloes (such as
the virial ratio, spin parameter, shape, and formation times, etc.) for the
high-redshift (z > 15) dark matter mini-haloes we find in our simulation, and
compare them to literature results and a moderate-resolution comparison run
within a cube of side-length 100 Mpc/h. We find that dark matter haloes at
high-redshift have a log-normal distribution of the dimensionless spin
parameter centered around {\lambda} $\sim$ 0.03, similar to their more massive
counterparts. They tend to have a small ratio of the length of the shortest
axis to the longest axis (sphericity), and are highly prolate. In fact, haloes
of given mass that formed recently are the least spherical, have the highest
virial ratios, and have the highest spins. Interestingly, the formation times
of our mini-halos depend only very weakly on mass, in contrast to more massive
objects. This is expected from the slope of the linear power spectrum of
density perturbations at this scale, but despite this difference, dark matter
structures at high-redshift share many properties with their much more massive
counterparts observed at later times.
[68]
oai:arXiv.org:1403.1589 [pdf] - 1208228
CO-dark gas and molecular filaments in Milky Way type galaxies
Submitted: 2014-03-06, last modified: 2014-05-09
We use the moving mesh code AREPO coupled to a time-dependent chemical
network to investigate the formation and destruction of molecular gas in
simulated spiral galaxies. This allows us to determine the characteristics of
the gas that is not traced by CO emission. Our extremely high resolution AREPO
simulations allow us to capture the chemical evolution of the disc, without
recourse to a parameterised `clumping factor'. We calculate H2 and CO column
densities through our simulated disc galaxies, and estimate the CO emission and
CO-H2 conversion factor. We find that in conditions akin to those in the local
interstellar medium, around 42% of the total molecular mass should be in
CO-dark regions, in reasonable agreement with observational estimates. This
fraction is almost insensitive to the CO integrated intensity threshold used to
discriminate between CO-bright and CO-dark gas, as long as this threshold is
less than 10 K km/s. The CO-dark molecular gas primarily resides in extremely
long (>100 pc) filaments that are stretched between spiral arms by galactic
shear. Only the centres of these filaments are bright in CO, suggesting that
filamentary molecular clouds observed in the Milky Way may only be small parts
of much larger structures. The CO-dark molecular gas mainly exists in a
partially molecular phase which accounts for a significant fraction of the
total disc mass budget. The dark gas fraction is higher in simulations with
higher ambient UV fields or lower surface densities, implying that external
galaxies with these conditions might have a greater proportion of dark gas.
[69]
oai:arXiv.org:1404.5964 [pdf] - 1209141
Interpreting the sub-linear Kennicutt-Schmidt relationship: The case for
diffuse molecular gas
Submitted: 2014-04-23
Recent statistical analysis of two extragalactic observational surveys
strongly indicate a sublinear Kennicutt-Schmidt (KS) relationship between the
star formation rate (Sigsfr) and molecular gas surface density (Sigmol). Here,
we consider the consequences of these results in the context of common
assumptions, as well as observational support for a linear relationship between
Sigsfr and the surface density of dense gas. If the CO traced gas depletion
time (tau_mol) is constant, and if CO only traces star forming giant molecular
clouds (GMCs), then the physical properties of each GMC must vary, such as the
volume densities or star formation rates. Another possibility is that the
conversion between CO luminosity and Sigmol, the XCO factor, differs from
cloud-to-cloud. A more straightforward explanation is that CO permeates the
hierarchical ISM, including the filaments and lower density regions within
which GMCs are embedded. A number of independent observational results support
this description, with the diffuse gas comprising at least 30% of the total
molecular content. The CO bright diffuse gas can explain the sublinear KS
relationship, and consequently leads to an increasing tau_mol with Sigmol. If
Sigsfr linearly correlates with the dense gas surface density, a sublinear KS
relationship indicates that the fraction of diffuse gas fdiff grows with
Sigmol. In galaxies where Sigmol falls towards the outer disk, this description
suggests that fdiff also decreases radially.
[70]
oai:arXiv.org:1310.6963 [pdf] - 1180241
TOPoS: I. Survey design and analysis of the first sample
Caffau, E.;
Bonifacio, P.;
Sbordone, L.;
Francois, P.;
Monaco, L.;
Spite, M.;
Plez, B.;
Cayrel, R.;
Christlieb, N.;
Clark, P.;
Glover, S.;
Klessen, R.;
Koch, A.;
Ludwig, H. -G.;
Spite, F.;
Steffen, M.;
Zaggia, S.
Submitted: 2013-10-25
The metal-weak tail of the metallicity distribution function (MDF) of the
Galactic Halo stars contains crucial information on the formation mode of the
first generation of stars. To determine this observationally, it is necessary
to observe large numbers of extremely metal-poor stars. We present here the
Turn-Off Primordial Stars survey (TOPoS) that is conducted as an ESO Large
Programme at the VLT. This project has {four} main goals: (i) to understand the
formation of low-mass stars in a low-metallicity gas: determine the metal-weak
tail of the halo MDF below [M/H]=-3.5. In particular, we aim at determining the
critical metallicity, that is the lowest metallicity sufficient for the
formation of low-mass stars; (ii) to determine the relative abundance of the
elements in extremely metal-poor stars, which are the signature of the massive
first stars; (iii) to determine the trend of the lithium abundance at the time
when the Galaxy formed; and (iv) to derive the fraction of C-enhanced extremely
metal-poor stars with respect to normal extremely metal-poor stars. The large
number of stars observed in the SDSS provides a good sample of candidates of
stars at extremely low metallicity. Candidates with turn-off colours down to
magnitude g=20 were selected from the low-resolution spectra of SDSS by means
of an automated procedure. X-Shooter has the potential of performing the
necessary follow-up spectroscopy, providing accurate metallicities and
abundance ratios for several key elements for these stars. We here present the
stellar parameters of the first set of stars. The nineteen stars range in iron
abundance between -4.1 and -2.9 dex relative to the Sun. Two stars have a high
radial velocity and, according to our estimate of their kinematics, appear to
be marginally bound to the Galaxy and are possibly accreted from another
galaxy.
[71]
oai:arXiv.org:1306.2951 [pdf] - 1171992
Indications of a sub-linear and non-universal Kennicutt-Schmidt
relationship
Submitted: 2013-06-12, last modified: 2013-10-10
We estimate the parameters of the Kennicutt-Schmidt (KS) relationship,
linking the star formation rate (Sigma_SFR) to the molecular gas surface
density (Sigma_mol), in the STING sample of nearby disk galaxies using a
hierarchical Bayesian method. This method rigorously treats measurement
uncertainties, and provides accurate parameter estimates for both individual
galaxies and the entire population. Assuming standard conversion factors to
estimate Sigma_SFR and Sigma_mol from the observations, we find that the KS
parameters vary between galaxies, indicating that no universal relationship
holds for all galaxies. The KS slope of the whole population is 0.76, with the
2sigma range extending from 0.58 to 0.94. These results imply that the
molecular gas depletion time is not constant, but varies from galaxy to galaxy,
and increases with the molecular gas surface density. Therefore, other galactic
properties besides just Sigma_mol affect Sigma_SFR, such as the gas fraction or
stellar mass. The non-universality of the KS relationship indicates that a
comprehensive theory of star formation must take into account additional
physical processes that may vary from galaxy to galaxy.
[72]
oai:arXiv.org:1305.7365 [pdf] - 1171702
Molecular cooling in the diffuse interstellar medium
Submitted: 2013-05-31, last modified: 2013-09-25
We use a simple one-zone model of the thermal and chemical evolution of
interstellar gas to study whether molecular hydrogen (H2) is ever an important
coolant of the warm, diffuse interstellar medium (ISM). We demonstrate that at
solar metallicity, H2 cooling is unimportant and the thermal evolution of the
ISM is dominated by metal line cooling. At metallicities below 0.1 Z_solar,
however, metal line cooling of low density gas quickly becomes unimportant and
H2 can become the dominant coolant, even though its abundance in the gas
remains small. We investigate the conditions required in order for H2 to
dominate, and show that it provides significant cooling only when the ratio of
the interstellar radiation field strength to the gas density is small. Finally,
we demonstrate that our results are insensitive to changes in the initial
fractional ionization of the gas or to uncertainties in the nature of the dust
present in the low-metallicity ISM.
[73]
oai:arXiv.org:1309.0823 [pdf] - 1178977
Substellar Objects in Nearby Young Clusters VII: The substellar mass
function revisited
Submitted: 2013-09-03
The abundance of brown dwarfs (BDs) in young clusters is a diagnostic of star
formation theory. Here we revisit the issue of determining the substellar
initial mass function (IMF), based on a comparison between NGC1333 and IC348,
two clusters in the Perseus star-forming region. We derive their mass
distributions for a range of model isochrones, varying distances, extinction
laws and ages, with comprehensive assessments of the uncertainties. We find
that the choice of isochrone and other parameters have significant effects on
the results, thus we caution against comparing IMFs obtained using different
approaches. For NGC1333, we find that the star/BD ratio R is between 1.9 and
2.4, for all plausible scenarios, consistent with our previous work. For IC348,
R is between 2.9 and 4.0, suggesting that previous studies have overestimated
this value. Thus, the star forming process generates about 2.5-5 substellar
objects per 10 stars. The derived star/BD ratios correspond to a slope of the
power-law mass function of alpha=0.7-1.0 for the 0.03-1.0Msol mass range. The
median mass in these clusters - the typical stellar mass - is between
0.13-0.30Msol. Assuming that NGC1333 is at a shorter distance than IC348, we
find a significant difference in the cumulative distribution of masses between
the two clusters, resulting from an overabundance of very low mass objects in
NGC1333. Gaia astrometry will constrain the cluster distances better and will
lead to a more definitive conclusion. Furthermore, ratio R is somewhat larger
in IC348 compared with NGC1333, although this difference is still within the
margins of error. Our results indicate that environments with higher object
density may produce a larger fraction of very low mass objects, in line with
predictions for brown dwarf formation through gravitational fragmentation of
filaments falling into a cluster potential.
[74]
oai:arXiv.org:1303.1978 [pdf] - 1510183
On the temperature structure of the Galactic Centre cloud G0.253+0.016
Submitted: 2013-03-08, last modified: 2013-04-04
We present a series of smoothed particle hydrodynamical models of
G0.253+0.016 (also known as 'The Brick'), a very dense molecular cloud that
lies close to the Galactic Centre. We explore how its gas and dust temperatures
react as we vary the strength of both the interstellar radiation field (ISRF)
and the cosmic ray ionisation rate (CRIR). As the physical extent of
G0.253+0.016 along our line-of-sight is unknown, we consider two possibilities:
one in which the longest axis is that measured in the plane of the sky (9.4 pc
in length), and one in which it is along the line of sight, in which case we
take it to be 17 pc. To recover the observed gas and dust temperatures, we find
find that the ISRF must be around 1000 times the solar neighbourhood value, and
the CRIR must be roughly 1E-14 /s, regardless of the geometries studied. For
such high values of the CRIR, we find that cooling in the cloud's interior is
dominated by neutral oxygen, in contrast to standard molecular clouds, which at
the same densities are mainly cooled via CO. Our results suggest that the
conditions near G0.253+0.016 are more extreme than those generally accepted for
the inner 500 pc of the galaxy.
[75]
oai:arXiv.org:1209.4757 [pdf] - 1151555
On the effects of rotation during the formation of population III
protostars
Submitted: 2012-09-21
It has been suggested that turbulent motions are responsible for the
transport of angular momentum during the formation of Population III stars,
however the exact details of this process have never been studied. We report
the results from three dimensional SPH simulations of a rotating
self-gravitating primordial molecular cloud, in which the initial velocity of
solid-body rotation has been changed. We also examine the build-up of the discs
that form in these idealized calculations.
[76]
oai:arXiv.org:1203.4251 [pdf] - 1117404
Star formation in metal-poor gas clouds
Submitted: 2012-03-19, last modified: 2012-07-18
Observations of molecular clouds in metal-poor environments typically find
that they have much higher star formation rates than one would expect based on
their observed CO luminosities and the molecular gas masses that are inferred
from them. This finding can be understood if one assumes that the conversion
factor between CO luminosity and H2 mass is much larger in these low
metallicity systems than in nearby molecular clouds. However, it is unclear
whether this is the only factor at work, or whether the star formation rate of
the clouds is directly sensitive to the metallicity of the gas.
To investigate this, we have performed numerical simulations of the coupled
dynamical, chemical and thermal evolution of model clouds with metallicities
ranging from 0.01 Z_solar to Z_solar. We find that the star formation rate in
our model clouds has little sensitivity to the metallicity. Reducing the
metallicity of the gas by two orders of magnitude delays the onset of star
formation in the clouds by no more than a cloud free-fall time and reduces the
time-averaged star formation rate by at most a factor of two. On the other
hand, the chemical state of the clouds is highly sensitive to the metallicity,
and at the lowest metallicities, the clouds are completely dominated by atomic
gas. Our results confirm that the CO-to-H2 conversion factor in these systems
depends strongly on the metallicity, but also show that the precise value is
highly time-dependent, as the integrated CO luminosity of the most metal-poor
clouds is dominated by emission from short-lived gravitationally collapsing
regions. Finally, we find evidence that the star formation rate per unit H2
mass increases with decreasing metallicity, owing to the much smaller H2
fractions present in our low metallicity clouds.
[77]
oai:arXiv.org:1202.5552 [pdf] - 1116890
Formation and evolution of primordial protostellar systems
Submitted: 2012-02-24, last modified: 2012-05-31
We investigate the formation of the first stars at the end of the cosmic dark
ages with a suite of three-dimensional, moving mesh simulations that directly
resolve the collapse of the gas beyond the formation of the first protostar at
the centre of a dark matter minihalo. The simulations cover more than 25 orders
of magnitude in density and have a maximum spatial resolution of 0.05 R_sun,
which extends well below the radius of individual protostars and captures their
interaction with the surrounding gas. In analogy to previous studies that
employed sink particles, we find that the Keplerian disc around the primary
protostar fragments into a number of secondary protostars, which is facilitated
by H2 collisional dissociation cooling and collision-induced emission. The
further evolution of the protostellar system is characterized by strong
gravitational torques that transfer angular momentum between the secondary
protostars formed in the disc and the surrounding gas. This leads to the
migration of about half of the secondary protostars to the centre of the cloud
in a free-fall time, where they merge with the primary protostar and enhance
its growth to about five times the mass of the second most massive protostar.
By the same token, a fraction of the protostars obtain angular momentum from
other protostars via N-body interactions and migrate to higher orbits. On
average, only every third protostar survives until the end of the simulation.
However, the number of protostars present at any given time increases
monotonically, suggesting that the system will continue to grow beyond the
limited period of time simulated here.
[78]
oai:arXiv.org:1205.2957 [pdf] - 1123360
Space-quality data from balloon-borne telescopes: the High Altitude
Lensing Observatory (HALO)
Rhodes, Jason;
Dobke, Benjamin;
Booth, Jeffrey;
Massey, Richard;
Liewer, Kurt;
Smith, Roger;
Amara, Adam;
Aldrich, Jack;
Berge, Joel;
Bezawada, Naidu;
Brugarolas, Paul;
Clark, Paul;
Dubbeldam, Cornelis M.;
Ellis, Richard;
Frenk, Carlos;
Gallie, Angus;
Heavens, Alan;
Henry, David;
Jullo, Eric;
Kitching, Thomas;
Lanzi, James;
Lilly, Simon;
Lunney, David;
Miyazaki, Satoshi;
Morris, David;
Paine, Christopher;
Peacock, John;
Pellegrino, Sergio;
Pittock, Roger;
Pool, Peter;
Refregier, Alexandre;
Seiffert, Michael;
Sharples, Ray;
Smith, Alexandra;
Stuchlik, David;
Taylor, Andy;
Teplitz, Harry;
Vanderveld, R. Ali;
Wu, James
Submitted: 2012-05-14
We present a method for attaining sub-arcsecond pointing stability during
sub- orbital balloon flights, as designed for in the High Altitude Lensing
Observatory (HALO) concept. The pointing method presented here has the
potential to perform near-space quality optical astronomical imaging at 1-2% of
the cost of space-based missions. We also discuss an architecture that can
achieve sufficient thermomechanical stability to match the pointing stability.
This concept is motivated by advances in the development and testing of Ultra
Long Duration Balloon (ULDB) flights which promise to allow observation
campaigns lasting more than three months. The design incorporates a multi-stage
pointing architecture comprising: a gondola coarse azimuth control system, a
multi-axis nested gimbal frame structure with arcsecond stability, a telescope
de-rotator to eliminate field rotation, and a fine guidance stage consisting of
both a telescope mounted angular rate sensor and guide CCDs in the focal plane
to drive a fast-steering mirror. We discuss the results of pointing tests
together with a preliminary thermo-mechanical analysis required for
sub-arcsecond pointing at high altitude. Possible future applications in the
areas of wide-field surveys and exoplanet searches are also discussed.
[79]
oai:arXiv.org:1204.5570 [pdf] - 1118257
How long does it take to form a molecular cloud?
Submitted: 2012-04-25
We present the first numerical simulations that self-consistently follow the
formation of dense molecular clouds in colliding flows. Our calculations
include a time-dependent model for the H2 and CO chemistry that runs alongside
a detailed treatment of the dominant heating and cooling processes in the ISM.
We adopt initial conditions characteristic of the warm neutral medium and study
two different flow velocities - a slow flow with v = 6.8 km/s and a fast flow
with v = 13.6 km/s. The clouds formed by the collision of these flows form
stars, with star formation beginning after 16 Myr in the case of the slower
flow, but after only 4.4 Myr in the case of the faster flow. In both flows, the
formation of CO-dominated regions occurs only around 2 Myr before the onset of
star formation. Prior to this, the clouds produce very little emission in the J
= 1 -> 0 transition line of CO, and would probably not be identified as
molecular clouds in observational surveys. In contrast, our models show that
H2-dominated regions can form much earlier, with the timing depending on the
details of the flow. In the case of the slow flow, small pockets of gas become
fully molecular around 10 Myr before star formation begins, while in the fast
flow, the first H2-dominated regions occur around 3 Myr before the first
prestellar cores form. Our results are consistent with models of molecular
cloud formation in which the clouds are dominated by "dark" molecular gas for a
considerable proportion of their assembly history.
[80]
oai:arXiv.org:1203.6842 [pdf] - 1358741
The stellar IMF at very low metallicities
Submitted: 2012-03-30
The theory for the formation of the first population of stars (Pop III)
predicts an initial mass function (IMF) dominated by high-mass stars, in
contrast to the present-day IMF, which tends to yield mostly stars with masses
less than 1 M_Sol. The leading theory for the transition in the characteristic
stellar mass predicts that the cause is the extra cooling provided by
increasing metallicity. In particular, dust can overtake H_2 as the leading
coolant at very high densities. The aim of this work is to determine the
influence of dust cooling on the fragmentation of very low metallicity gas. To
investigate this, we make use of high-resolution hydrodynamic simulations with
sink particles to replace contracting protostars, and analyze the collapse and
further fragmentation of star-forming clouds. We follow the thermodynamic
response of the gas by solving the full thermal energy equation, and also track
the behavior of the dust temperature and the chemical evolution of the gas. We
model four clouds with different metallicities (10^{-4}, 10^{-5}, 10^{-6}
Z_Sol, and 0), and determine the properties of each cloud at the point at which
it undergoes gravitational fragmentation. We find evidence for fragmentation in
all four cases, and hence conclude that there is no critical metallicity below
which fragmentation is impossible. Nevertheless, there is a clear change in the
behavior of the clouds at Z = 10^{-5} Z_Sol, caused by the fact that at this
metallicity, fragmentation takes longer to occur than accretion, leading to a
flat mass function at lower metallicities.
[81]
oai:arXiv.org:1201.2695 [pdf] - 1092930
On the formation of very metal-poor stars: The case of SDSS
J1029151+172927
Submitted: 2012-01-12
The formation of stars is a key process in the early universe with far
reaching consequences for further cosmic evolution. While stars forming from
truly primordial gas are thought to be considerably more massive than our Sun,
stars in the universe today have typical masses below one solar mass. The
physical origin of this transition and the conditions under which it occurs are
highly debated. There are two competing models, one based on metal-line cooling
as the primary agent and one based on dust cooling. The recent discovery of the
extremely metal poor star SDSS J1029151+172927 provides a unique opportunity to
distinguish between these two models. Based on simple thermodynamic
considerations we argue that SDSS J1029151+172927 was more likely formed as a
result of dust continuum cooling rather than cooling by metal lines. We
conclude that the masses of extremely metal-poor stars are determined by
dust-induced fragmentation.
[82]
oai:arXiv.org:1102.0670 [pdf] - 1051867
Approximations for modelling CO chemistry in GMCs: a comparison of
approaches
Submitted: 2011-02-03, last modified: 2011-11-24
We examine several different simplified approaches for modelling the
chemistry of CO in three-dimensional numerical simulations of turbulent
molecular clouds. We compare the different models both by looking at the
behaviour of integrated quantities such as the mean CO fraction or the
cloud-averaged CO-to-H2 conversion factor, and also by studying the detailed
distribution of CO as a function of gas density and visual extinction. In
addition, we examine the extent to which the density and temperature
distributions depend on our choice of chemical model.
We find that all of the models predict the same density PDF and also agree
very well on the form of the temperature PDF for temperatures T > 30 K,
although at lower temperatures, some differences become apparent. All of the
models also predict the same CO-to-H2 conversion factor, to within a factor of
a few. However, when we look more closely at the details of the CO
distribution, we find larger differences. The more complex models tend to
produce less CO and more atomic carbon than the simpler models, suggesting that
the C/CO ratio may be a useful observational tool for determining which model
best fits the observational data. Nevertheless, the fact that these chemical
differences do not appear to have a strong effect on the density or temperature
distributions of the gas suggests that the dynamical behaviour of the molecular
clouds on large scales is not particularly sensitive to how accurately the
small-scale chemistry is modelled.
[83]
oai:arXiv.org:1109.3861 [pdf] - 1084190
TreeCol: a novel approach to estimating column densities in
astrophysical simulations
Submitted: 2011-09-18
We present TreeCol, a new and efficient tree-based scheme to calculate column
densities in numerical simulations. Knowing the column density in any direction
at any location in space is a prerequisite for modelling the propagation of
radiation through the computational domain. TreeCol therefore forms the basis
for a fast, approximate method for modelling the attenuation of radiation
within large numerical simulations. It constructs a HEALPix sphere at any
desired location and accumulates the column density by walking the tree and by
adding up the contributions from all tree nodes whose line of sight contributes
to the pixel under consideration. In particular when combined with widely-used
tree-based gravity solvers the new scheme requires little additional
computational cost. In a simulation with $N$ resolution elements, the
computational cost of TreeCol scales as $N \log N$, instead of the $N^{5/3}$
scaling of most other radiative transfer schemes. TreeCol is naturally
adaptable to arbitrary density distributions and is easy to implement and to
parallelize. We discuss its accuracy and performance characteristics for the
examples of a spherical protostellar core and for the turbulent interstellar
medium. We find that the column density estimates provided by TreeCol are on
average accurate to better than 10 percent. In another application, we compute
the dust temperatures for solar neighborhood conditions and compare with the
result of a full-fledged Monte Carlo radiation-transfer calculation. We find
that both methods give very similar answers. We conclude that TreeCol provides
a fast, easy to use, and sufficiently accurate method of calculating column
densities that comes with little additional computational cost when combined
with an existing tree-based gravity solver.
[84]
oai:arXiv.org:1105.3073 [pdf] - 1076650
Is molecular gas necessary for star formation?
Submitted: 2011-05-16, last modified: 2011-08-18
On galactic scales, the surface density of star formation appears to be well
correlated with the surface density of molecular gas. This has lead many
authors to suggest that there exists a causal relationship between the chemical
state of the gas and its ability to form stars -- in other words, the
assumption that the gas must be molecular before star formation can occur. We
test this hypothesis by modelling star formation within a dense cloud of gas
with properties similar to a small molecular cloud using a series of different
models of the chemistry, ranging from one in which the formation of molecules
is not followed and the gas is assumed to remain atomic throughout, to one that
tracks the formation of both H2 and CO. We find that presence of molecules in
the gas has little effect on the ability of the gas to form stars: star
formation can occur just as easily in atomic gas as in molecular gas. At low
densities (< 10^4 cm^-3), the gas is able to cool via C+ fine-structure
emission almost as efficiently as via CO rotational line emission, while at
higher densities, the main cooling process involves the transfer of energy from
gas to dust, meaning that the presence of molecules is again unimportant.
Cooling by H2 is particularly inefficient, accounting for as little as 1
percent of the overall cooling in the cloud. Rather than the chemical makeup,
we find that the most important factor controlling the rate of star formation
is the ability of the gas to shield itself from the interstellar radiation
field. As this is also a prerequisite for the survival of molecules within the
gas, our results support a picture in which molecule formation and the
formation of cold gas are both correlated with the column density of the cloud
-- and thus its ability to shield itself -- rather than being directly
correlated with each other.
[85]
oai:arXiv.org:1108.1040 [pdf] - 1083211
Protostellar outflows with Smoothed Particle Magnetohydrodynamics
(SPMHD)
Submitted: 2011-08-04
The protostellar collapse of a molecular cloud core is usually accompanied by
outflow phenomena. The latter are thought to be driven by magnetorotational
processes from the central parts of the protostellar disc. While several 3D
AMR/nested grid studies of outflow phenomena in collapsing magnetically
supercritical dense cores have been reported in the literature, so far no such
simulation has been performed using the Smoothed Particle Hydrodynamics (SPH)
method. This is mainly due to intrinsic numerical difficulties in handling
magnetohydrodynamics within SPH, which only recently were partly resolved. In
this work, we use an approach where we evolve the magnetic field via the
induction equation, augmented with stability correction and divergence cleaning
schemes. We consider the collapse of a rotating core of one solar mass,
threaded by a weak magnetic field initially parallel to the rotation axis so
that the core is magnetically supercritical. We show, that Smoothed Particle
Magnetohydrodynamics (SPMHD) is able to handle the magnetorotational processes
connected with outflow phenomena, and to produce meaningful results which are
in good agreement with findings reported in the literature. Especially, our
numerical scheme allows for a quantitative analysis of the evolution of the
ratio of the toroidal to the poloidal magnetic field, which we performed in
this work.
[86]
oai:arXiv.org:1101.5491 [pdf] - 1051747
Simulations on a Moving Mesh: The Clustered Formation of Population III
Protostars
Submitted: 2011-01-28, last modified: 2011-05-23
The cosmic dark ages ended a few hundred million years after the Big Bang,
when the first stars began to fill the universe with new light. It has
generally been argued that these stars formed in isolation and were extremely
massive - perhaps 100 times as massive as the Sun. In a recent study, Clark and
collaborators showed that this picture requires revision. They demonstrated
that the accretion disks that build up around Population III stars are strongly
susceptible to fragmentation and that the first stars should therefore form in
clusters rather than in isolation. We here use a series of high-resolution
hydrodynamical simulations performed with the moving mesh code AREPO to follow
up on this proposal and to study the influence of environmental parameters on
the level of fragmentation. We model the collapse of five independent minihalos
from cosmological initial conditions, through the runaway condensation of their
central gas clouds, to the formation of the first protostar, and beyond for a
further 1000 years. During this latter accretion phase, we represent the
optically thick regions of protostars by sink particles. Gas accumulates
rapidly in the circumstellar disk around the first protostar, fragmenting
vigorously to produce a small group of protostars. After an initial burst,
gravitational instability recurs periodically, forming additional protostars
with masses ranging from ~ 0.1 to 10 M_sun. Although the shape, multiplicity,
and normalization of the protostellar mass function depend on the details of
the sink-particle algorithm, fragmentation into protostars with diverse masses
occurs in all cases, confirming earlier reports of Population III stars forming
in clusters. Depending on the efficiency of later accretion and merging,
Population III stars may enter the main sequence in clusters and with much more
diverse masses than are commonly assumed.
[87]
oai:arXiv.org:1103.1231 [pdf] - 1052527
The Effects of Accretion Luminosity upon Fragmentation in the Early
Universe
Submitted: 2011-03-07
We introduce a prescription for the luminosity from accreting protostars into
smoothed particle hydrodynamics simulation, and apply the method to simulations
of five primordial minihalos generated from cosmological initial conditions. We
find that accretion luminosity delays fragmentation within the halos, but does
not prevent it. In halos that slowly form a low number of protostars, the
accretion luminosity can reduce the number of fragments that are formed before
the protostars start ionising their surroundings. However, halos that rapidly
form many protostars become dominated by dynamical processes, and the effect of
accretion luminosity becomes negligible. Generally the fragmentation found in
the halos is highly dependent on the initial conditions. Accretion luminosity
does not substantially affect the accretion rates experienced by the
protostars, and is far less important than dynamical interactions, which can
lead to ejections that effectively terminate the accretion. We find that the
accretion rates onto the inner regions of the disks (20 AU) around the
protostars are highly variable, in contrast to the constant or smoothly
decreasing accretion rates currently used in models of the pre-main sequence
evolution of Population III stars.
[88]
oai:arXiv.org:1101.4891 [pdf] - 1051676
The effect of dust cooling on low-metallicity star-forming clouds
Submitted: 2011-01-25, last modified: 2011-02-08
The theory for the formation of the first population of stars (Pop III)
predicts a IMF composed predominantly of high-mass stars, in contrast to the
present-day IMF, which tends to yield stars with masses less than 1 M_Solar.
The leading theory for the transition in the characteristic stellar mass
predicts that the cause is the extra cooling provided by increasing metallicity
and in particular the cooling provided at high densities by dust. The aim of
this work is to test whether dust cooling can lead to fragmentation and be
responsible for this transition. To investigate this, we make use of
high-resolution hydrodynamic simulations. We follow the thermodynamic evolution
of the gas by solving the full thermal energy equation, and also track the
evolution of the dust temperature and the chemical evolution of the gas. We
model clouds with different metallicities, and determine the properties of the
cloud at the point at which it undergoes gravitational fragmentation. We follow
the further collapse to scales of an AU when we replace very dense,
gravitationally bound, and collapsing regions by a simple and nongaseous
object, a sink particle. Our results suggest that for metallicities as small as
10^{-5}Z_Solar, dust cooling produces low-mass fragments and hence can
potentially enable the formation of low mass stars. We conclude that dust
cooling affects the fragmentation of low-metallicity gas clouds and plays an
important role in shaping the stellar IMF even at these very low metallicities.
We find that the characteristic fragment mass increases with decreasing
metallicity, but find no evidence for a sudden transition in the behaviour of
the IMF within the range of metallicites examined in our present study.
[89]
oai:arXiv.org:1101.5284 [pdf] - 1051732
The Formation and Fragmentation of Disks around Primordial Protostars
Submitted: 2011-01-27
The very first stars to form in the Universe heralded an end to the cosmic
dark ages and introduced new physical processes that shaped early cosmic
evolution. Until now, it was thought that these stars lived short, solitary
lives, with only one extremely massive star, or possibly a very wide binary
system, forming in each dark matter minihalo. Here we describe numerical
simulations that show that these stars were, to the contrary, often members of
tight multiple systems. Our results show that the disks that formed around the
first young stars were unstable to gravitational fragmentation, possibly
producing small binary and higher-order systems that had separations as small
as the distance between the Earth and the Sun.
[90]
oai:arXiv.org:1006.1508 [pdf] - 1032976
Gravitational fragmentation in turbulent primordial gas and the initial
mass function of Population III stars
Submitted: 2010-06-08, last modified: 2010-12-16
We report results from numerical simulations of star formation in the early
universe that focus on the dynamical behavior of metal-free gas under different
initial and environmental conditions. In particular we investigate the role of
turbulence, which is thought to ubiquitously accompany the collapse of
high-redshift halos. We distinguish between two main cases: the birth of
Population III.1 stars - those which form in the pristine halos unaffected by
prior star formation - and the formation of Population III.2 stars - those
forming in halos where the gas is still metal free but has an increased
ionization fraction. This latter case can arise either from exposure to the
intense UV radiation of stellar sources in neighboring halos, or from the high
virial temperatures associated with the formation of massive halos, that is,
those with masses greater than 1e8 solar masses. We find that turbulent
primordial gas is highly susceptible to fragmentation in both cases, even for
turbulence in the subsonic regime, i.e. for rms velocity dispersions as low as
20 % of the sound speed. Contrary to our original expectations, fragmentation
is more vigorous and more widespread in pristine halos compared to pre-ionized
ones. We therefore predict Pop III.1 stars to be on average of somewhat lower
mass, and form in larger groups, than Pop III.2 stars. We find that fragment
masses cover over two orders of magnitude, indicating that the resulting
Population III initial mass function was significantly extended in mass as
well. This prompts the need for a large, high-resolution study of the formation
of dark matter minihalos that is capable of resolving the turbulent flows in
the gas at the moment when the baryons become self-gravitating. This would help
determine which, if any, of the initial conditions presented in our study are
realized in nature.
[91]
oai:arXiv.org:1008.3790 [pdf] - 1034430
Protostellar collapse and fragmentation using an MHD GADGET
Submitted: 2010-08-23, last modified: 2010-12-09
Although the influence of magnetic fields is regarded as vital in the star
formation process, only a few magnetohydrodynamics (MHD) simulations have been
performed on this subject within the smoothed particle hydrodynamics (SPH)
method. This is largely due to the unsatisfactory treatment of non-vanishing
divergence of the magnetic field. Recently smoothed particle
magnetohydrodynamics (SPMHD) simulations based on Euler potentials have proven
to be successful in treating MHD collapse and fragmentation problems, however
these methods are known to have some intrinsical difficulties. We have
performed SPMHD simulations based on a traditional approach evolving the
magnetic field itself using the induction equation. To account for the
numerical divergence, we have chosen an approach that subtracts the effects of
numerical divergence from the force equation, and additionally we employ
artificial magnetic dissipation as a regularization scheme. We apply this
realization of SPMHD to a widely known setup, a variation of the 'Boss &
Bodenheimer standard isothermal test case', to study the impact of the magnetic
fields on collapse and fragmentation. In our simulations, we concentrate on
setups, where the initial magnetic field is parallel to the rotation axis. We
examine different field strengths and compare our results to other findings
reported in the literature. We are able to confirm specific results found
elsewhere, namely the delayed onset of star formation for strong fields,
accompanied by the tendency to form only single stars. We also find that the
'magnetic cushioning effect', where the magnetic field is wound up to form a
'cushion' between the binary, aids binary fragmentation in a case, where
previously only formation of a single protostar was expected.
[92]
oai:arXiv.org:1011.1908 [pdf] - 1041809
Effects of Varying the Three-Body Molecular Hydrogen Formation Rate in
Primordial Star Formation
Submitted: 2010-11-08
The transformation of atomic hydrogen to molecular hydrogen through
three-body reactions is a crucial stage in the collapse of primordial,
metal-free halos, where the first generation of stars (Population III stars) in
the Universe are formed. However, in the published literature, the rate
coefficient for this reaction is uncertain by nearly an order of magnitude. We
report on the results of both adaptive mesh refinement (AMR) and smoothed
particle hydrodynamics (SPH) simulations of the collapse of metal-free halos as
a function of the value of this rate coefficient. For each simulation method,
we have simulated a single halo three times, using three different values of
the rate coefficient. We find that while variation between halo realizations
may be greater than that caused by the three-body rate coefficient being used,
both the accretion physics onto Population III protostars as well as the
long-term stability of the disk and any potential fragmentation may depend
strongly on this rate coefficient.
[93]
oai:arXiv.org:1010.1839 [pdf] - 1041178
Stellar and substellar initial mass function: a model that implements
gravoturbulent fragmentation and accretion
Submitted: 2010-10-09
In this work, we derive the stellar initial mass function (IMF) from the
superposition of mass distributions of dense cores, generated through
gravoturbulent fragmentation of unstable clumps in molecular clouds (MCs) and
growing through competitive accretion. MCs are formed by the turbulent cascade
in the interstellar medium at scales L from 100 down to ~0.1 pc. Their internal
turbulence is essentially supersonic and creates clumps with a lognormal
distribution of densities n. Our model is based on the assumption of a
power-law relationship between clump mass and clump density: n~m^x, where x is
a scale-free parameter. Gravitationally unstable clumps are assumed to undergo
isothermal fragmentation and produce protostellar cores with a lognormal mass
distribution, centred around the clump Jeans mass. Masses of individual cores
are then assumed to grow further through competitive accretion until the rest
of the gas within the clump is being exhausted. The observed IMF is best
reproduced for a choice of x=0.25, for a characteristic star formation
timescale of ~5 Myr, and for a low star formation efficiency of ~10 %.
[94]
oai:arXiv.org:1009.5395 [pdf] - 1040880
A quantification of the non-spherical geometry and accretion of
collapsing cores
Submitted: 2010-09-27
We present the first detailed classification of the structures of Class 0
cores in a high resolution simulation of a giant molecular cloud. The simulated
cloud contains 10^4 solar masses and produces over 350 cores which allows for
meaningful statistics. Cores are classified into three types according to how
much they depart from spherical symmetry. We find that three quarters of the
cores are better described as irregular filaments than as spheres. Recent
Herschel results have shown that cores are formed within a network of
filaments, which we find has had a significant impact on the resulting core
geometries. We show that the column densities and ram pressure seen by the
protostar are not uniform and generally peak along the axes of the filament.
The angular momentum vector of the material in the cores varies both in
magnitude and direction, which will cause the rotation vector of the central
source to fluctuate during the collapse of the core. In the case of the more
massive stars, accretion from the environment outside the original core volume
is even more important than that from the core itself. This additional gas is
primarily accreted onto the cores along the dense filaments in which the cores
are embedded, and the sections of the surfaces of the cores which do not
coincide with a filament have very little additional material passing through
them. The assumption of spherical symmetry cannot be applied to the majority of
collapsing cores, and is never a good description of how stars accrete gas from
outside the original core radius. This has ramifications for our understanding
of collapsing cores, in particular their line profiles, the effect of radiation
upon them and their ability to fragment.
[95]
oai:arXiv.org:1007.2504 [pdf] - 1033698
Implementing and comparing sink particles in AMR and SPH
Submitted: 2010-07-15, last modified: 2010-09-21
We implemented sink particles in the Adaptive Mesh Refinement (AMR) code
FLASH to model the gravitational collapse and accretion in turbulent molecular
clouds and cores. Sink particles are frequently used to measure properties of
star formation in numerical simulations, such as the star formation rate and
efficiency, and the mass distribution of stars. We show that only using a
density threshold for sink particle creation is insufficient in case of
supersonic flows, because the density can exceed the threshold in strong shocks
that do not necessarily lead to local collapse. Additional physical collapse
indicators have to be considered. We apply our AMR sink particle module to the
formation of a star cluster, and compare it to a Smoothed Particle
Hydrodynamics (SPH) code with sink particles. Our comparison shows encouraging
agreement of gas and sink particle properties between the AMR and SPH code.
[96]
oai:arXiv.org:1009.1152 [pdf] - 1034744
The efficiency of star formation in clustered and distributed regions
Submitted: 2010-09-06
We investigate the formation of both clustered and distributed populations of
young stars in a single molecular cloud. We present a numerical simulation of a
10,000 solar mass elongated, turbulent, molecular cloud and the formation of
over 2500 stars. The stars form both in stellar clusters and in a distributed
mode which is determined by the local gravitational binding of the cloud. A
density gradient along the major axis of the cloud produces bound regions that
form stellar clusters and unbound regions that form a more distributed
population. The initial mass function also depends on the local gravitational
binding of the cloud with bound regions forming full IMFs whereas in the
unbound, distributed regions the stellar masses cluster around the local Jeans
mass and lack both the high-mass and the low-mass stars. The overall efficiency
of star formation is ~ 15 % in the cloud when the calculation is terminated,
but varies from less than 1 % in the the regions of distributed star formation
to ~ 40 % in regions containing large stellar clusters. Considering that large
scale surveys are likely to catch clouds at all evolutionary stages, estimates
of the (time-averaged) star formation efficiency for the giant molecular cloud
reported here is only ~ 4 %. This would lead to the erroneous conclusion of
'slow' star formation when in fact it is occurring on a dynamical timescale.
[97]
oai:arXiv.org:1008.4932 [pdf] - 220293
The Effect of Environment on Massive Star Formation
Submitted: 2010-08-29
In this contribution we review our recent numerical work discussing the
essential role of the local cluster environment in assembling massive stars.
First we show that massive stars are formed from low mass pre-stellar cores and
become massive due to accretion. Proto-stars that benefit from this accretion
are those situated at the centre of a cluster's potential well, which is the
focal point of the contraction of the cluster gas. Given that most of the mass
which makes up a massive star in this model comes from the cluster environment
rather than the core, it is important to model the molecular cloud environment
accurately. Preliminary results of a simulation which accurately treats the
chemistry and time-dependent thermodynamics of a molecular cloud show
quantitatively similar star formation to previous models, but allow a true
comparison to be made between simulation and observations. This method can also
be applied to cases with varying metallicities allowing star formation in
primordial gas to be studied. In general, these numerical studies of clustered
star formation yield IMFs which are compatible with the Salpeter mass function.
The only possible exception to this is in low density unbound regions of
molecular clouds which lack very low and high mass stars.
[98]
oai:arXiv.org:1007.2763 [pdf] - 203302
Fragmentation in turbulent primordial gas
Submitted: 2010-07-16
We report results from numerical simulations of star formation in the early
universe that focus on the role of subsonic turbulence, and investigate whether
it can induce fragmentation of the gas. We find that dense primordial gas is
highly susceptible to fragmentation, even for rms turbulent velocity
dispersions as low as 20% of the initial sound speed. The resulting fragments
cover over two orders of magnitude in mass, ranging from 0.1 to 40 solar
masses. However, our results suggest that the details of the fragmentation
depend on the local properties of the turbulent velocity field and hence we
expect considerable variations in the resulting stellar mass spectrum in
different halos.
[99]
oai:arXiv.org:1001.4456 [pdf] - 293713
Modeling Collapse and Accretion in Turbulent Gas Clouds: Implementation
and Comparison of Sink Particles in AMR and SPH
Submitted: 2010-01-25, last modified: 2010-02-28
We implemented sink particles in the adaptive mesh refinement (AMR)
hydrodynamics code FLASH. Sink particles are created in regions of local
gravitational collapse, and their trajectories and accretion can be followed
over many dynamical times. We perform a series of tests including the time
integration of circular and elliptical orbits, the collapse of a Bonnor-Ebert
sphere and a rotating, fragmenting cloud core. We compare the collapse of a
highly unstable singular isothermal sphere to the theory by Shu (1977), and
show that the sink particle accretion rate is in excellent agreement with the
theoretical prediction.
To model eccentric orbits and close encounters of sink particles accurately,
we show that a very small timestep is often required, for which we implemented
subcycling of the N-body system. We emphasize that a sole density threshold for
sink particle creation is insufficient in supersonic flows, if the density
threshold is below the opacity limit. In that case, the density can exceed the
threshold in strong shocks that do not necessarily lead to local collapse.
Additional checks for bound state, gravitational potential minimum, Jeans
instability and converging flows are absolutely necessary for a meaningful
creation of sink particles.
We apply our new sink particle module for FLASH to the formation of a stellar
cluster, and compare to a smoothed particle hydrodynamics (SPH) code with sink
particles. Our comparison shows encouraging agreement of gas properties,
indicated by column density distributions and radial profiles, and of sink
particle formation times and positions. We find excellent agreement in the
number of sink particles formed, and in their accretion and mass distributions.
[100]
oai:arXiv.org:0808.1647 [pdf] - 15331
The formation of the first galaxies and the transition to low-mass star
formation
Submitted: 2008-08-12, last modified: 2009-10-20
The formation of the first galaxies at redshifts z ~ 10-15 signaled the
transition from the simple initial state of the universe to one of ever
increasing complexity. We here review recent progress in understanding their
assembly process with numerical simulations, starting with cosmological initial
conditions and modelling the detailed physics of star formation. In this
context we emphasize the importance and influence of selecting appropriate
initial conditions for the star formation process. We revisit the notion of a
critical metallicity resulting in the transition from primordial to present-day
initial mass functions and highlight its dependence on additional cooling
mechanisms and the exact initial conditions. We also review recent work on the
ability of dust cooling to provide the transition to present-day low-mass star
formation. In particular, we highlight the extreme conditions under which this
transition mechanism occurs, with violent fragmentation in dense gas resulting
in tightly packed clusters.
[102]
oai:arXiv.org:0904.3302 [pdf] - 23541
On the constancy of the high-mass slope of the initial mass function
Submitted: 2009-04-21
The observed slope at the high-mass end of the initial mass function (IMF)
displays a remarkable universality in a wide variety of physical environments.
We predict that competitive accretion, the ongoing accretion of gas from a
common reservoir by a collection of protostellar cores, can provide a natural
explanation for such a universal slope in star forming regions with
metallicities roughly greater than 1e-5 the solar value. In our discussion, we
point out that competitive accretion will occur whenever a gaseous region has
multiple Jeans masses of material and contains large-scale motions that are
controlled by the gravitational potential well. We describe how and when these
conditions can be reached during the chemical enrichment of the Universe,
showing that they can occur for a wide range of metallicities and environmental
conditions. We also discuss the ability of other physical processes to limit
the effects of further accretion onto protostellar cores. Current theoretical
and numerical studies show that competitive accretion is robust against
disrupting effects - such as feedback from young stars, supersonic turbulence
and magnetic fields - in all but the most extreme cases.
[103]
oai:arXiv.org:0903.3240 [pdf] - 1001682
Fragmentation in Molecular Clouds and its connection to the IMF
Submitted: 2009-03-18
We present an analysis of star-forming gas cores in an SPH simulation of a
Giant Molecular Cloud. We identify cores using their deep potential wells. This
yields a smoother distribution with clearer boundaries than density.
Additionally, this gives an indication of future collapse, as bound potential
cores (p-cores) represent the earliest stages of fragmentation in molecular
clouds. We find that the mass function of the p-cores resembles the stellar IMF
and the observed clump mass function, although p-core masses (~0.7 Msol) are
smaller than typical density clumps. The bound p-cores are generally subsonic,
have internal substructure, and are only quasi-spherical. We see no evidence of
massive bound cores supported by turbulence. We trace the evolution of the
p-cores forward in time, and investigate the connection between the original
p-core mass and the stellar mass that formed from it. We find that there is a
poor correlation, with considerable scatter suggesting accretion onto the core
is dependent on more factors than just the initial core mass. During the
accretion process the p-cores accrete from beyond the region first bound,
highlighting the importance of the core environment to its subsequent
evolution.
[104]
oai:arXiv.org:0809.2702 [pdf] - 16375
The structure of molecular clouds and the universality of the clump mass
function
Submitted: 2008-09-16
Using an SPH simulation of a star-forming region in a molecular cloud, we
show that the emergence of a clump mass function (CMF) resembling the stellar
initial mass function (IMF) is a ubiquitous feature of molecular cloud
structure, but caution against its over-interpretation. We employ three
different techniques to extract the clumps in this study. In the first two, we
interpolate the SPH particle data to 2 and 3 dimensional grids before
performing the clump-find, using position-position (PP) and
position-position-velocity (PPV) information respectively. In the last
technique, the clump-finding is performed on the SPH data directly, making use
of the full 3 dimensional position information. Although the CMF is typically
similar to that observed in regions of nearby star formation, the individual
clumps and their masses are found to be unreliable since they depend strongly
on the parameters and the method of the clump-finding. In particular we find
that the resolution and orientation of the data make a significant difference
to the resulting properties of the identified clumps in the PP and PPV cases.
We conclude that making comparisons between a CMF and the stellar IMF should be
done with caution, since the definition of a clump boundary, and hence the
number of clumps and their properties, are arbitrary in the extraction method.
This is especially true if molecular clouds are truly scale free.
[105]
oai:arXiv.org:0808.0608 [pdf] - 15155
Open questions in the study of population III star formation
Submitted: 2008-08-05
The first stars were key drivers of early cosmic evolution. We review the
main physical elements of the current consensus view, positing that the first
stars were predominantly very massive. We continue with a discussion of
important open questions that confront the standard model. Among them are
uncertainties in the atomic and molecular physics of the hydrogen and helium
gas, the multiplicity of stars that form in minihalos, and the possible
existence of two separate modes of metal-free star formation.
[106]
oai:arXiv.org:0807.0460 [pdf] - 14162
Gravitational fragmentation and the formation of brown dwarfs in stellar
clusters
Submitted: 2008-07-02
We investigate the formation of brown dwarfs and very low-mass stars through
the gravitational fragmentation of infalling gas into stellar clusters. The
gravitational potential of a forming stellar cluster provides the focus that
attracts gas from the surrounding molecular cloud. Structures present in the
gas grow, forming filaments flowing into the cluster centre. These filaments
attain high gas densities due to the combination of the cluster potential and
local self-gravity. The resultant Jeans masses are low, allowing the formation
of very low-mass fragments. The tidal shear and high velocity dispersion
present in the cluster preclude any subsequent accretion thus resulting in the
formation of brown dwarfs or very low-mass stars. Ejections are not required as
the brown dwarfs enter the cluster with high relative velocities, suggesting
that their disc and binary properties should be similar to that of low-mass
stars. This mechanism requires the presence of a strong gravitational potential
due to the stellar cluster implying that brown dwarf formation should be more
frequent in stellar clusters than in distributed populations of young stars.
Brown dwarfs formed in isolation would require another formation mechanism such
as due to turbulent fragmentation.
[107]
oai:arXiv.org:0806.4312 [pdf] - 13935
The ISM in spiral galaxies: can cooling in spiral shocks produce
molecular clouds?
Submitted: 2008-06-26
We investigate the thermodynamics of the ISM and the formation of molecular
hydrogen through numerical simulations of spiral galaxies. The model follows
the chemical, thermal and dynamical response of the disc to an external spiral
potential. Self-gravity and magnetic fields are not included. The calculations
demonstrate that gas can cool rapidly when subject to a spiral shock. Molecular
clouds in the spiral arms arise through a combination of compression of the ISM
by the spiral shock and orbit crowding. These results highlight that local
self-gravity is not required to form molecular clouds. Self-shielding provides
a sharp transition density, below which gas is essentially atomic, and above
which the molecular gas fraction is >0.001. The timescale for gas to move
between these regimes is very rapid (<~1 Myr). From this stage, the majority of
gas generally takes between 10 to 20 Myr to obtain high H$_{2}$ fractions (>50
%). Although our calculations are unable to resolve turbulent motions on scales
smaller than the spiral arm and do not include self-gravity. True cloud
formation timescales are therefore expected to be even shorter.
The mass budget of the disc is dominated by cold gas residing in the spiral
arms. Between 50 and 75 % of this gas is in the atomic phase. When this gas
leaves the spiral arm and drops below the self-shielding limit it is heated by
the galactic radiation field. Consequently, most of the volume in the interarm
regions is filled with warm atomic gas. However, some cold spurs and clumps can
survive in interarm regions for periods comparable to the interarm passage
timescale. Altogether between 7 and 40% of the gas in our disc is molecular,
depending on the surface density of the calculation, with approximately 20%
molecular for a surface density comparable to the solar neighbourhood.
[108]
oai:arXiv.org:0803.4053 [pdf] - 11284
The star formation efficiency and its relation to variations in the
initial mass function
Submitted: 2008-03-28, last modified: 2008-04-01
We investigate how the dynamical state of a turbulently supported, 1000 solar
mass, molecular cloud affects the properties of the cluster it forms, focusing
our discussion on the star formation efficiency (SFE) and the initial mass
function (IMF). A variety of initial energy states are examined in this paper,
ranging from clouds with PE = 0.1 KE to clouds with PE = 10 KE, and for both
isothermal and piece-wise polytropic equations of state (similar to that
suggested by Larson). It is found that arbitrary star formation efficiencies
are possible, with strongly unbound clouds yielding very low star formation
efficiencies. We suggest that the low star formation efficiency in the
Maddelena cloud may be a consequence of the relatively unbound state of its
internal structure. It is also found that competitive accretion results in the
observed IMF when the clouds have initial energy states of PE >= KE. We show
that under such conditions the shape of the IMF is independent of time in the
calculations. This demonstrates that the global accretion process can be
terminated at any stage in the cluster's evolution, while still yielding a
distribution of stellar masses that is consistent with the observed IMF. As the
clouds become progressively more unbound, competitive accretion is less
important and the protostellar mass function flattens. These results predict
that molecular clouds should be permeated with a distributed population of
stars that follow a flatter than Salpeter IMF.
[109]
oai:arXiv.org:0801.3182 [pdf] - 1000605
Formation of Stellar Clusters and the Importance of Thermodynamics for
Fragmentation
Submitted: 2008-01-21
We discuss results from numerical simulations of star cluster formation in
the turbulent interstellar medium (ISM). The thermodynamic behavior of the
star-forming gas plays a crucial role in fragmentation and determines the
stellar mass function as well as the dynamic properties of the nascent stellar
cluster. This holds for star formation in molecular clouds in the solar
neighborhood as well as for the formation of the very first stars in the early
universe. The thermodynamic state of the ISM is a result of the balance between
heating and cooling processes, which in turn are determined by atomic and
molecular physics and by chemical abundances. Features in the effective
equation of state of the gas, such as a transition from a cooling to a heating
regime, define a characteristic mass scale for fragmentation and so set the
peak of the initial mass function of stars (IMF). As it is based on fundamental
physical quantities and constants, this is an attractive approach to explain
the apparent universality of the IMF in the solar neighborhood as well as the
transition from purely primordial high-mass star formation to the more normal
low-mass mode observed today.
[110]
oai:arXiv.org:0706.0613 [pdf] - 1902
The First Stellar Cluster
Submitted: 2007-06-05, last modified: 2007-10-15
We report results from numerical simulations of star formation in the early
universe that focus on gas at very high densities and very low metallicities.
We argue that the gas in the central regions of protogalactic halos will
fragment as long as it carries sufficient angular momentum. Rotation leads to
the build-up of massive disk-like structures which fragment to form protostars.
At metallicities Z ~ 10^-5 Zsun, dust cooling becomes effective and leads to a
sudden drop of temperature at densities above n = 10^12 cm^-3. This induces
vigorous fragmentation, leading to a very densely-packed cluster of low-mass
stars. This is the first stellar cluster. The mass function of stars peaks
below 1 Msun, similar to what is found in the solar neighborhood, and
comparable to the masses of the very-low metallicity subgiant stars recently
discovered in the halo of our Milky Way. We find that even purely primordial
gas can fragment at densities 10^14 cm^-3 < n < 10^16 cm^-3, although the
resulting mass function contains only a few objects (at least a factor of ten
less than the Z = 10^-5 Zsun mass function), and is biased towards higher
masses. A similar result is found for gas with Z = 10^-6 Zsun. Gas with Z <=
10^-6 Zsun behaves roughly isothermally at these densities (with polytropic
exponent gamma ~ 1.06) and the massive disk-like structures that form due to
angular momentum conservation will be marginally unstable. As fragmentation is
less efficient, we expect stars with Z <= 10^-6 Zsun to be massive, with masses
in excess of several tens of solar masses, consistent with the results from
previous studies.
[111]
oai:arXiv.org:0704.2837 [pdf] - 630
Clump Lifetimes and the Initial Mass Function
Submitted: 2007-04-21
Recent studies of dense clumps/cores in a number of regions of low-mass star
formation have shown that the mass distribution of these clumps closely
resembles the initial mass function (IMF) of field stars. One possible
interpretation of these observations is that we are witnessing the
fragmentation of the clouds into the IMF, and the observed clumps are bound
pre-stellar cores. In this paper, we highlight a potential difficulty in this
interpretation, namely that clumps of varying mass are likely to have
systematically varying lifetimes. This timescale problem can effectively
destroy the similarity bewteen the clump and stellar mass functions, such that
a stellar-like clump mass function (CMF) results in a much steeper stellar IMF.
We also discuss some ways in which this problem may be avoided.
[112]
oai:arXiv.org:astro-ph/0701497 [pdf] - 88626
Ionisation-induced star formation II: External irradiation of a
turbulent molecular cloud
Submitted: 2007-01-17
In this paper, we examine numerically the difference between triggered and
revealed star formation. We present Smoothed Particle Hydrodynamics (SPH)
simulations of the impact on a turbulent 10^4 solar-mass molecular cloud of
irradiation by an external source of ionising photons. In particular, using a
control model, we investigate the triggering of star formation within the
cloud. We find that, although feedback has a dramatic effect on the morphology
of our model cloud, its impact on star formation is relatively minor. We show
that external irradiation has both positive and negative effects, accelerating
the formation of some objects, delaying the formation of others, and inducing
the formation of some that would not otherwise have formed. Overall, the
calculation in which feedback is included forms nearly twice as many objects
over a period of \sim0.5 freefall times (\sim2.4 Myr), resulting in a
star--formation efficiency approximately one third higher (\sim4% as opposed to
\sim3% at this epoch) as in the control run in which feedback is absent.
Unfortunately, there appear to be no observable characteristics which could be
used to differentiate objects whose formation was triggered from those which
were forming anyway and which were simply revealed by the effects of radiation,
although this could be an effect of poor statistics.
[113]
oai:arXiv.org:astro-ph/0603578 [pdf] - 80787
Clumpy shocks and the clump mass function
Submitted: 2006-03-21
In this paper, we examine whether clumpy, colliding, flows could be
responsible for the clump mass functions that have been observed in several
regions of embedded star formation, which have been shown to be described by a
Salpeter type slope. The flows presented here, which comprise a population of
initially identical clumps and the calculations are performed with and without
the inclusion of self-gravity. When the shock region is at its densest, we find
that the clump mass spectrum is always well modelled by a Salpeter type slope.
This is true regardless of whether the self-gravity is included in the
simulations or not. In the non-self-gravitating simulations, this slope is
retained at lower Mach numbers (Mach 5 and 10) as the simulations progress past
the densest phase. In the simulations which include self-gravity, we find that
low Mach number runs yield a flatter mass function after the densest phase.
This is simply a result of increased coagulation due to gravitational collapse
of the flows. In the high Mach number runs (Mach 20) the Salpeter slope is
always lost. The self gravitating calculations also show that the sub-group of
gravitationally bound clumps in which star formation occurs, always contain the
most massive clumps in the population. The mass function of these bound star
forming clumps is not at all similar to the Salpeter type mass function
observed for stars in the field. We conclude that the clump mass function may
not only have nothing to do with gravity, but also nothing to do with the star
formation process and the resulting mass distribution of stars. This raises
doubt over the claims that the clump mass function is the origin of the stellar
IMF, for regions such as rho Oph, Serpens and the Orion B cloud.
[114]
oai:arXiv.org:astro-ph/0510759 [pdf] - 77255
Results from the adaptive optics coronagraph at the WHT
Submitted: 2005-10-26
Described here is the design and commissioning of a coronagraph facility for
the 4.2 metre William Herschel Telescope (WHT) and its Nasmyth Adaptive Optics
system for Multi-purpose Instrumentation (NAOMI). The use of the NAOMI system
gives an improved image resolution of ~0.15 arcsecs at a wavelength of 2.2um.
This enables the Optimised Stellar Coronagraph for Adaptive optics (OSCA) to
suppress stellar light using smaller occulting masks and thus allows regions
closer to bright astronomical objects to be imaged. OSCA provides a selection
of 10 different occulting masks with sizes of 0.25 - 2.0 arcsecs in diameter,
including two with full greyscale Gaussian profiles. There is also a choice of
different sized and shaped Lyot stops (pupil plane masks). Computer simulations
of the different coronagraphic options with the NAOMI segmented mirror have
relevance for the next generation of highly segmented extremely large
telescopes.
[115]
oai:arXiv.org:astro-ph/0503141 [pdf] - 880831
Star formation in unbound giant molecular clouds: the origin of OB
associations?
Submitted: 2005-03-07
We investigate the formation of star clusters in an unbound GMC, where the
supporting kinetic energy is twice as large as the cloud's self-gravity. This
cloud manages to form a series of star clusters and disperse, all within
roughly 2 crossing times (10 Myr), supporting recent claims that star formation
is a rapid process. Simple assumptions about the nature of the star formation
occurring in the clusters allows us to place an estimate for the star formation
efficiency at about 5 to 10 %, consistent with observations. We also propose
that unbound clouds can act as a mechanism for forming OB associations. The
clusters that form in the cloud behave as OB subgroups. These clusters are
naturally expanding from one another due to unbound nature of the flows that
create them. The properties of the cloud we present here are are consistent
with those of classic OB associations.
[116]
oai:arXiv.org:astro-ph/0502479 [pdf] - 71270
Centrally condensed turbulent cores: Massive stars or fragmentation?
Submitted: 2005-02-23
We present numerical investigations into the formation of massive stars from
centrally condensed turbulent cores. The results of five hydrodynamical
simulations are described, following the collapse of the core, fragmentation
and the formation of small clusters of protostars. We generate two different
initial turbulent velocity fields corresponding to power-law spectra with power
varying as k^{-4} and k^{-3.5}, and apply two different initial core radii.
Calculations are included for both completely isothermal collapse, and a
non-isothermal equation of state above a critical density 10^{-14}gcm^{-3}. Our
calculations reveal the preference of fragmentation over monolithic star
formation in turbulent cores. Fragmentation was prevalent in all the isothermal
cases. Although disc fragmentation was largely suppressed in the non-isothermal
runs due to the small dynamic range between the initial density and the
critical density, our results show that some fragmentation still persisted.
This is inconsistent with previous suggestions that turbulent cores result in
the formation of a single massive star. We conclude that turbulence cannot be
measured as an isotropic pressure term.
[117]
oai:arXiv.org:astro-ph/0311286 [pdf] - 60866
Star Formation in Transient Molecular Clouds
Submitted: 2003-11-12
We present the results of a numerical simulation in which star formation
proceeds from an initially unbound molecular cloud core. The turbulent motions,
which dominate the dynamics, dissipate in shocks leaving a quiescent region
which becomes gravitationally bound and collapses to form a small multiple
system. Meanwhile, the bulk of the cloud escapes due to its initial supersonic
velocities. In this simulation, the process naturally results in a star
formation efficiency of 50%. The mass involved in star formation depends on the
gas fraction that dissipates sufficient kinetic energy in shocks. Thus, clouds
with larger turbulent motions will result in lower star formation efficiencies.
This implies that globally unbound, and therefore transient giant molecular
clouds (GMCs), can account for the low efficiency of star formation observed in
our Galaxy without recourse to magnetic fields or feedback processes.
Observations of the dynamic stability in molecular regions suggest that GMCs
may not be self-gravitating, supporting the ideas presented in this letter.
[118]
oai:arXiv.org:astro-ph/0208151 [pdf] - 50967
Facility class Rayleigh beacon AO system for the 4.2m William Herschel
Telescope
Rutten, R. G. M.;
Clark, P.;
Myers, R. M.;
Wilson, R. W.;
Bingham, R. G.;
Emsellem, E.;
Gregory, T.;
Humphreys, R. A.;
Knapen, J. H.;
Moretto, G.;
Morris, S. L.;
Talbot, G.
Submitted: 2002-08-07
A rationale is presented for the use of a relatively low-altitude Rayleigh
Laser Guide Star to provide partial adaptive optics correction across a large
fraction of the sky on the 4.2m William Herschel Telescope. The scientific
motivation is highlighted and supported by model calculations. An overview the
technical implementation of the system is presented.
