Normalized to: Ciocci, M.
[1]
oai:arXiv.org:1003.4745 [pdf] - 1700287
Beam test calibration of the balloon-borne imaging calorimeter for the
CREAM experiment
Marrocchesi, P. S.;
Ahn, H. S.;
Bagliesi, M. G.;
Basti, A.;
Bigongiari, G.;
Castellina, A.;
Ciocci, M. A.;
Di Virgilio, A.;
Lomtatze, T.;
Ganel, O.;
Kim, K. C.;
Lee, M. H.;
Ligabue, F.;
Lutz, L.;
Maestro, P.;
Malinine, A.;
Meucci, M.;
Millucci, V.;
Morsani, F.;
Seo, E. S.;
Sina, R.;
Wu, J.;
Wu, J.;
Yoon, Y. S.;
Zei, R.;
Zinn, S. Y.
Submitted: 2010-03-24, last modified: 2018-06-15
CREAM (Cosmic Ray Energetics And Mass) is a multi-flight balloon mission
designed to collect direct data on the elemental composition and individual
energy spectra of cosmic rays. Two instrument suites have been built to be
flown alternately on a yearly base. The tungsten/Sci-Fi imaging calorimeter for
the second flight, scheduled for December 2005, was calibrated with electron
and proton beams at CERN. A calibration procedure based on the study of the
longitudinal shower profile is described and preliminary results of the beam
test are presented.
[4]
oai:arXiv.org:1509.01979 [pdf] - 1272465
INFN Camera demonstrator for the Cherenkov Telescope Array
Ambrosi, G.;
Ambrosio, M.;
Aramo, C.;
Bertucci, B.;
Bissaldi, E.;
Bitossi, M.;
Brasolin, S.;
Busetto, G.;
Carosi, R.;
Catalanotti, S.;
Ciocci, M. A.;
Consoletti, R.;
Da Vela, P.;
Dazzi, F.;
De Angelis, A.;
De Lotto, B.;
de Palma, F.;
Desiante, R.;
Di Girolamo, T.;
Di Giulio, C.;
Doro, M.;
D'Urso, D.;
Ferraro, G.;
Ferrarotto, F.;
Gargano, F.;
Giglietto, N.;
Giordano, F.;
Giraudo, G.;
Iacovacci, M.;
Ionica, M.;
Iori, M.;
Longo, F.;
Mariotti, M.;
Mastroianni, S.;
Minuti, M.;
Morselli, A.;
Paoletti, R.;
Pauletta, G.;
Rando, R.;
Fernandez, G. Rodriguez;
Rugliancich, A.;
Simone, D.;
Stella, C.;
Tonachini, A.;
Vallania, P.;
Valore, L.;
Vagelli, V.;
Verzi, V.;
Vigorito, C.
Submitted: 2015-09-07
The Cherenkov Telescope Array is a world-wide project for a new generation of
ground-based Cherenkov telescopes of the Imaging class with the aim of
exploring the highest energy region of the electromagnetic spectrum. With two
planned arrays, one for each hemisphere, it will guarantee a good sky coverage
in the energy range from a few tens of GeV to hundreds of TeV, with improved
angular resolution and a sensitivity in the TeV energy region better by one
order of magnitude than the currently operating arrays. In order to cover this
wide energy range, three different telescope types are envisaged, with
different mirror sizes and focal plane features. In particular, for the highest
energies a possible design is a dual-mirror Schwarzschild-Couder optical
scheme, with a compact focal plane. A silicon photomultiplier (SiPM) based
camera is being proposed as a solution to match the dimensions of the pixel
(angular size of ~ 0.17 degrees). INFN is developing a camera demonstrator made
by 9 Photo Sensor Modules (PSMs, 64 pixels each, with total coverage 1/4 of the
focal plane) equipped with FBK (Fondazione Bruno Kessler, Italy) Near
UltraViolet High Fill factor SiPMs and Front-End Electronics (FEE) based on a
Target 7 ASIC, a 16 channels fast sampler (up to 2GS/s) with deep buffer,
self-trigger and on-demand digitization capabilities specifically developed for
this purpose. The pixel dimensions of $6\times6$ mm$^2$ lead to a very compact
design with challenging problems of thermal dissipation. A modular structure,
made by copper frames hosting one PSM and the corresponding FEE, has been
conceived, with a water cooling system to keep the required working
temperature. The actual design, the adopted technical solutions and the
achieved results for this demonstrator are presented and discussed.