A new generation CCD detector called low light level CCD (L3CCD) that performs like an intensified CCD without incorporating a micro channel plate (MCP) for light amplification was procured and tested. A series of short exposure images with millisecond integration time has been obtained. The L3CCD is cooled to about $-80^\circ$ C by Peltier cooling.

Speckle interferometric technique is employed to record a series of hundreds of short-exposure images of several close binary stars with sub-arcsecond separation through a narrow band filter at the Cassegrain focus of the 2.34 meter (m) Vainu Bappu telescope (VBT), situated at Vainu Bappu Observatory (VBO), Kavalur, India. The data are recorded sequentially by a Peltier-cooled intensified CCD camera with 10 ms exposure. The auto-correlation method is applied to determine the angular separations and position angles of these binary systems.

A new optical speckle interferometer for use at the 2.34 meter Vainu Bappu Telescope (VBT), at Vainu Bappu Observatory (VBO), Kavalur, India, has been designed and developed. Provisions have been made for observation both at the prime focus (f/3.25), as well as at the Cassegrain focus (f/13) of the said telescope. The technical details of this sensitive instrument and the design features are described. An interface between the telescope and the afore-mentioned interferometer is made based on a concept of eliminating the formation of eddies due to the hot air entrapment. The performances of this instrument has been tested both at the laboratory, as well as at the Cassegrain end of the telescope. It is being used routinely to observe the speckle-grams of close-binary (separation $<$1 arc second) stars. The size of the Fried's parameter, r$_{o}$, is also measured.

The night time variation of the Fried's parameter, r$_{o}$ is measured on 28-29 March 1991, at the Cassegrain focus of 2.34 m Vainu Bappu Telescope (VBT), at Vainu Bappu Observatory (VBO), Kavalur, India, using speckle interferometer; the results are discussed.