Energetic electrons accelerated by solar flares often give rise to type III radio bursts at a broad waveband and even interplanetary type III bursts (IT3) if the wavelength extends to decameter-kilometer. In this Letter, we investigate the probability of the flares that produce IT3, based on the sample of 2272 flares above M-class observed from 1996 to 2016. It is found that only 49.6% of the flares are detected to be accompanied with IT3. The duration, peak flux, and fluence of the flares with and without IT3 both present power-law distributions in the frequency domain, but the corresponding spectral indices for the former (2.06$\pm$0.17, 2.04$\pm$0.18, and 1.55$\pm$0.09) are obviously smaller than that for the latter (2.82$\pm$0.22, 2.51$\pm$0.19, and 2.40$\pm$0.09), showing that the flares with IT3 have longer durations and higher peak fluxes. We further examine the relevance of coronal mass ejections (CMEs) to the two groups of flares. It is found that 58% (655 of 1127) of the flares with IT3 but only 19% (200 of 1078) of the flares without IT3 are associated with CMEs, and that the associated CMEs for the flares with IT3 are inclined to be wider and faster. This indicates that CMEs may also play a role in producing IT3, speculatively facilitating the escape of accelerated electrons from the low corona to the interplanetary space.

The stellar velocity distribution function (DF) in the solar vicinity is re-examined using data from the SDSS APOGEE survey's DR16 and \emph{Gaia} DR2. By exploiting APOGEE's ability to chemically discriminate with great reliability the thin disk, thick disk and (accreted) halo populations, we can, for the first time, derive the three-dimensional velocity DFs for these chemically-separated populations. We employ this smaller, but more data-rich APOGEE+{\it Gaia} sample to build a \emph{data-driven model} of the local stellar population velocity DFs, and use these as basis vectors for assessing the relative density proportions of these populations over 5 $<$ $R$ $<$ 12 kpc, and $-1.5$ $<$ $z$ $<$ 2.5 kpc range as derived from the larger, more complete (i.e., all-sky, magnitude-limited) {\it Gaia} database. We find that 81.9 $\pm$ 3.1$\%$ of the objects in the selected \emph{Gaia} data-set are thin-disk stars, 16.6 $\pm$ 3.2$\%$ are thick-disk stars, and 1.5 $\pm$ 0.1$\%$ belong to the Milky Way stellar halo. We also find the local thick-to-thin-disk density normalization to be $\rho_{T}(R_{\odot})$/$\rho_{t}(R_{\odot})$ = 2.1 $\pm$ 0.2$\%$, a result consistent with, but determined in a completely different way than, typical starcount/density analyses. Using the same methodology, the local halo-to-disk density normalization is found to be $\rho_{H}(R_{\odot})$/($\rho_{T}(R_{\odot})$ + $\rho_{t}(R_{\odot})$) = 1.2 $\pm$ 0.6$\%$, a value that may be inflated due to chemical overlap of halo and metal-weak thick disk stars.

We investigate the initiation and early evolution of 12 solar eruptions, including six active region hot channel and six quiescent filament eruptions, which were well observed by the \textsl{Solar Dynamics Observatory}, as well as by the \textsl{Solar TErrestrial RElations Observatory} for the latter. The sample includes one failed eruption and 11 coronal mass ejections, with velocities ranging from 493 to 2140~km~s$^{-1}$. A detailed analysis of the eruption kinematics yields the following main results. (1) The early evolution of all events consists of a slow-rise phase followed by a main-acceleration phase, the height-time profiles of which differ markedly and can be best fit, respectively, by a linear and an exponential function. This indicates that different physical processes dominate in these phases, which is at variance with models that involve a single process. (2) The kinematic evolution of the eruptions tends to be synchronized with the flare light curve in both phases. The synchronization is often but not always close. A delayed onset of the impulsive flare phase is found in the majority of the filament eruptions (5 out of 6). This delay, and its trend to be larger for slower eruptions, favor ideal MHD instability models. (3) The average decay index at the onset heights of the main acceleration is close to the threshold of the torus instability for both groups of events (although based on a tentative coronal field model for the hot channels), suggesting that this instability initiates and possibly drives the main acceleration.

We present the observational results from the 43-GHz Very Long Baseline Array (VLBA) observations of 124 compact radio-loud active galactic nuclei (AGNs) that were conducted between 2014 November and 2016 May. The typical dimensions of the restoring beam in each image are about 0.5 mas $\times$ 0.2 mas. The highest resolution of 0.2 mas corresponds to a physical size of 0.02 pc for the lowest redshift source in the sample. The 43-GHz very long baseline interferometry (VLBI) images of 97 AGNs are presented for the first time. We study the source compactness on milli-arcsec (mas) and sub-mas scales, and suggest that 95 sources in our sample are suitable for future space VLBI observations. By analyzing our data supplemented with other VLBA AGN surveys from literature, we find that the core brightness temperature increases with increasing frequency below a break frequency ~ 7 GHz, and decreases between ~7--240~GHz but increases again above~240 GHz in the rest frame of the sources. This indicates that the synchrotron opacity changes from optically thick to thin. We also find a strong statistical correlation between radio and $\gamma$-ray flux densities. Our correlation is tighter than those in literature derived from lower-frequency VLBI data, suggesting that the $\gamma$-ray emission is produced more co-spatially with the 43-GHz VLBA core emission. This correlation can also be extrapolated to the un-beamed AGN population, implying that a universal $\gamma$-ray production mechanism might be at work for all types of AGNs.

The orientation, chirality, and dynamics of solar eruptive filaments is a key to understanding the magnetic field of coronal mass ejections (CMEs) and therefore to predicting the geoeffectiveness of CMEs arriving at Earth. However, confusion and contention remain over the relationship between the filament chirality, magnetic helicity, and sense of rotation during eruption. To resolve the ambiguity in observations, in this paper, we used stereoscopic observations to determine the rotation direction of filament apex and the method proposed by Chen et al. (2014) to determine the filament chirality. Our sample of 12 eruptive active-region filaments establishes a strong one-to-one relationship, i.e., during the eruption, sinistral/dextral filaments (located in the southern/northern hemisphere) rotate clockwise/counterclockwise when viewed from above, and corroborates a weak hemispheric preference, i.e., a filament and related sigmoid both exhibit a forward (reverse) S shape in the southern (northern) hemisphere, which suggests that the sigmoidal filament is associated with a low-lying magnetic flux rope with its axis dipped in the middle. As a result of rotation, the projected S shape of a filament is anticipated to be reversed during eruption.

In past decades, much progress has been achieved on the origin and evolution of coronal mass ejections (CMEs). In-situ observations of the counterparts of CMEs, especially magnetic clouds (MCs) near the Earth, have provided measurements of the structure and total flux of CME flux ropes. However, it has been difficult to measure these properties in the erupting CME flux rope, in particular in the pre-existing flux rope. In this work, we propose a model to estimate the toroidal flux of the pre-existing flux rope by subtracting the flux contributed by magnetic reconnection during the eruption from the flux measured in the MC. The flux by the reconnection is derived from geometric properties of two-ribbon flares based on a quasi-2D reconnection model. We then apply the model to four CME/flare events and find that the ratio of toroidal flux in the pre-existing flux rope to that of the associated MC lies in the range of 0.40--0.88. It indicates that the toroidal flux of the pre-existing flux rope has an important contribution to that of the CME flux rope and is usually at least as large as the flux arising from the eruption process for the selected events.

In this paper, we study in detail the evolution of a mini-sigmiod originating in a cross-equatorial coronal hole, where the magnetic field is mostly open and seriously distinct from the closed background field above active-region sigmoids. The source region first appeared as a bipole, which subsequently experienced a rapid emergence followed by a long-term decay. Correspondingly, the coronal structure initially appeared as arc-like loops, then gradually sheared and transformed into continuously sigmoidal loops, mainly owing to flux cancellation near the polarity inversion line. The temperature of J-shaped and sigmoidal loops is estimated to be about $2.0\times10^{6}$ K, greater than that of the background coronal hole. Using the flux-rope insertion method, we further reconstruct the nonlinear force-free fields that well reproduces the transformation of the potential field into a sigmoidal field. The fact that the sheared and sigmoidal loops are mainly concentrated at around the high-Q region implies that the reconnection most likely takes place there to form the sigmoidal field and heat the plasma. Moreover, the twist of sigmoidal field lines is estimated to be around 0.8, less than the values derived for the sigmoids from active regions. However, the sigmoidal flux may quickly enter an unstable regime at the very low corona ($<10\ Mm$) due to the open background field. The results suggest that the mini-sigmoid, at least the one in our study, has the same formation and eruption process as the large-scale one, but is significantly influenced by the overlying flux.

Soar filament eruptions are often associated with solar flares and coronal mass ejections (CMEs), which are the major impacts on space weather. However, the fine structures and the trigger mechanisms of solar filaments are still unclear. To address these issues, we studied a failed solar active-region filament eruption associated with a C-class flare by using high-resolution H$\alpha$ images from the New Vacuum Solar Telescope (NVST), supplemented by EUV observations of the Solar Dynamical Observatory (SDO). Before the filament eruption, a small bi-pole magnetic field emerged below the filament. And then magnetic reconnection between the filament and the emerging bi-pole magnetic field triggered the filament eruption. During the filament eruption, the untwisting motion of the filament can be clearly traced by the eruptive threads. Moreover, the foot-points of the eruptive threads are determined by tracing the descending filament materials. Note that the filament twisted structure and the right part of the eruptive filament threads cannot be seen before the filament eruption. These eruptive threads at the right part of the filament are found to be rooting in the weak negative polarities near the main negative sunspot. Moreover, a new filament formed in the filament channel due to material injection from the eruptive filament. The above observations and the potential field extrapolations are inclined to support that the filament materials were transferred into the overlying magnetic loops and the nearby filament channel by magnetic reconnection. These observations shed light on better understanding on the complexity of filament eruptions.

We study the kinematics of the M87 jet using the first year data of the KVN and VERA Array (KaVA) large program, which has densely monitored the jet at 22 and 43 GHz since 2016. We find that the apparent jet speeds generally increase from $\approx0.3c$ at $\approx0.5$ mas from the jet base to $\approx2.7c$ at $\approx20$ mas, indicating that the jet is accelerated from subluminal to superluminal speeds on these scales. We perform a complementary jet kinematic analysis by using archival Very Long Baseline Array monitoring data observed in $2005-2009$ at 1.7 GHz and find that the jet is moving at relativistic speeds up to $\approx5.8c$ at distances of $200-410$ mas. We combine the two kinematic results and find that the jet is gradually accelerated over a broad distance range that coincides with the jet collimation zone, implying that conversion of Poynting flux to kinetic energy flux takes place. If the jet emission consists of a single streamline, the observed trend of jet acceleration ($\Gamma\propto z^{0.16\pm0.01}$) is relatively slow compared to models of a highly magnetized jet. This indicates that Poynting flux conversion through the differential collimation of poloidal magnetic fields may be less efficient than expected. However, we find a non-negligible dispersion in the observed speeds for a given jet distance, making it difficult to describe the jet velocity field with a single power-law acceleration function. We discuss the possibility that the jet emission consists of multiple streamlines following different acceleration profiles, resulting in jet velocity stratification.

M87 is one of the best available source for studying the AGN jet-launching region. To enrich our knowledge of this region, with quasi-simultaneous observations using VLBA at 22, 43 and 86 GHz, we capture the images of the radio jet in M87 on a scale within several thousand R s . Based on the images, we analyze the transverse jet structure and obtain the most accurate spectral-index maps of the jet in M87 so far, then for the first time, we compare the results of the two analyses and find a spatial association between the jet collimations and the local enhancement of the density of external medium in the jet-launching region. We also find the external medium is not uniform, and greatly contributes to the free-free absorption in this region. In addition, we find for the jet in M87, its temporal morphology in the launching region may be largely affected by the local, short-lived kink instability growing in itself.

During non-flaring times, the radio flux of the Sun at the wavelength of a few centimeters to several tens of centimeters mostly originates from the thermal bremsstrahlung emission, very similar to the EUV radiation. Owing to such a proximity, it is feasible to investigate the relationship between the EUV emission and radio emission in a quantitative way. In this paper, we reconstruct the radio images of the Sun through the differential emission measure obtained from the multi-wavelength EUV images of the Atmospheric Imaging Assembly on board Solar Dynamic Observatory. Through comparing the synthetic radio images at 6 GHz with those observed by Siberian Radioheliograph, we find that the predicted radio flux is qualitatively consistent with the observed value, confirming thermal origin of the coronal radio emission during non-flaring times. The results further show that the predicted radio flux is closer to the observations in the case of including the contribution of the plasma with temperatures above 3 MK than in the case of only involving the low temperature plasma as was usually done in the era of pre-SDO. We also discuss the applications of the method and uncertainties of the results.

Strong lensing is one of the most spectacular views in the universe. Many cosmological applications have been proposed, but the number of such lensing systems is still limited. In this work, we applied an improved version of a previously developed spectroscopic lensing search method to the SDSS-III BOSS and proposed a list of highly possible candidates. Follow-up CFHT Megacam imaging observations were performed for five systems, and two out of five are probably strong lensing systems with at least one image close to the central galaxy, although no counter images are detected.

In this work, we investigate the formation of a magnetic flux rope (MFR) above the central polarity inversion line (PIL) of NOAA Active Region 12673 during its early emergence phase. Through analyzing the photospheric vector magnetic field, extreme ultraviolet (EUV) and ultraviolet (UV) images, extrapolated three-dimensional (3D) non-linear force-free fields (NLFFFs), as well as the photospheric motions, we find that with the successive emergence of different bipoles in the central region, the conjugate polarities separate, resulting in collision between the non-conjugated opposite polarities. Nearly-potential loops appear above the PIL at first, then get sheared and merge at the collision locations as evidenced by the appearance of a continuous EUV sigmoid on 2017 September 4, which also indicates the formation of an MFR. The 3D NLFFFs further reveal the gradual buildup of the MFR, accompanied by the appearance of two elongated bald patches (BPs) at the collision locations and a very low-lying hyperbolic flux tube configuration between the BPs. The final MFR has relatively steady axial flux and average twist number of around $2.1\times 10^{20}$~Mx and -1.5, respective. Shearing motions are found developing near the BPs when the collision occurs, with flux cancellation and UV brightenings being observed simultaneously, indicating the development of a process named as "collisional shearing" (firstly identified by Chintzoglou et al. 2019). The results clearly show that the MFR is formed by "collisional shearing", i.e., through shearing and flux cancellation driven by the collision between non-conjugated opposite polarities during their emergence.

To investigate the factors that control the success and/or failure of solar eruptions, we study the magnetic field and 3-Dimensional (3D) configuration of 16 filament eruptions during 2010 July - 2013 February. All these events, i.e., erupted but failed to be ejected to become a coronal mass ejection (CME), are failed eruptions with the filament maximum height exceeding $100 Mm$. The magnetic field of filament source regions is approximated by a potential field extrapolation method. The filament 3D configuration is reconstructed from three vantage points by the observations of STEREO Ahead/Behind and SDO spacecraft. We calculate the decay index at the apex of these failed filaments and find that in 7 cases, their apex decay indexes exceed the theoretical threshold ($n_{crit} = 1.5$) of the torus instability. We further determine the orientation change or rotation angle of each filament top during the eruption. Finally, the distribution of these events in the parameter space of rotation angle versus decay index is established. Four distinct regimes in the parameter space are empirically identified. We find that, all the torus-unstable cases (decay index $n > 1.5$), have a large rotation angles ranging from $50^\circ - 130^\circ$. The possible mechanisms leading to the rotation and failed eruption are discussed. These results imply that, besides the torus instability, the rotation motion during the eruption may also play a significant role in solar eruptions.

A second emission enhancement in warm coronal extreme-ultraviolet (EUV) lines (about 2-7 MK) during some solar flares is known as the EUV late phase. Imaging observations confirm that the late phase emission originates from a set of longer or higher loops than the main flare loops. Nevertheless, some questions remain controversial: What is the relationship between these two loop systems? What is the heating source of late phase emission, a heating accompany the main phase heating or occuring quite later? In this paper, we present clear evidence for heating source in a late-phase solar flare: magnetic reconnection of overlying field in a quadrupolar magnetic configuration. The event is triggered by an erupted core structure that eventually leads to a coronal mass ejection (CME). Cusp feature and its shrinkage motion high in the late-phase emission region are the manifestation of the later phase reconnection following the main flare reconnection. Using the enthalpy-based thermal evolution of loops (EBTEL) model, we reasonably reproduce the late-phase emissions in some EUV lines. We suggest that a continuous additional heating is responsible for the appearance of the elongated EUV late phase.

The KVN(Korean VLBI Network)-style simultaneous multi-frequency receiving mode is demonstrated to be promising for mm-VLBI observations. Recently, other Very long baseline interferometry (VLBI) facilities all over the globe start to implement compatible optics systems. Simultaneous dual/multi-frequency VLBI observations at mm wavelengths with international baselines are thus possible. In this paper, we present the results from the first successful simultaneous 22/43 GHz dual-frequency observation with KaVA(KVN and VERA array), including images and astrometric results. Our analysis shows that the newly implemented simultaneous receiving system has brought a significant extension of the coherence time of the 43 GHz visibility phases along the international baselines. The astrometric results obtained with KaVA are consistent with those obtained with the independent analysis of the KVN data. Our results thus confirm the good performance of the simultaneous receiving systems for the non-KVN stations. Future simultaneous observations with more global stations bring even higher sensitivity and micro-arcsecond level astrometric measurements of the targets.

We propose a new pattern-matching algorithm for matching CCD images to a stellar catalogue based statistical method in this paper. The method of constructing star pairs can greatly reduce the computational complexity compared with the triangle method. We use a subsample of the brightest objects from the image and reference catalogue, and then find a coordinate transformation between the image and reference catalogue based on the statistical information of star pairs. Then all the objects are matched based on the initial plate solution. The matching process can be accomplished in several milliseconds for the observed images taken by Yunnan observatory 1-m telescope.

With about 12 000 OB type stars selected from the LAMOST and Gaia survey, we study their 3 dimensional velocity distribution over the range of galactocentric radius from 6 to 15 kpc in the Galactic disk plane. A clear ripple pattern in the radial velocity ($V_R$) map is shown. The median $V_R$ reaches $-8$ km s$^{-1}$ at $R\sim9$ kpc, then increases to $\sim0$ km s$^{-1}$ at $R\sim12$ kpc, and later declines to below $-10$ km s$^{-1}$ beyond $R\sim13$ kpc. The median azimuthal velocity ($V_\phi$) map shows a similar pattern but has roughly $1/4$ phase difference with the radial velocity. Although the ripple of negative $V_R$ at $\sim9$ kpc extends to about 40$^\circ$ in the azimuth angle, it does not align with either the Local or the Perseus spiral arm. Moreover, the farther ripple beyond 13 kpc does not match the Outer spiral arm either. This indicates that the non-axisymmetric kinematic features are not induced by perturbations of known spiral structures. The central rotating bar can not lead to such patterns in the outer disk either. External perturbation of a dwarf galaxy or a dark matter sub-halo can induce such patterns but requires more evidence from both observations and simulations. The $V_\phi$ map in the $Z$--$V_Z$ plane of the OB stars is also investigated. Despite asymmetry to some degree, no spiral pattern is found. This is reasonable since most of the OB stars have ages much younger than 100 Myrs, which is smaller than one orbital period around the Galactic center.

We have observed three near-Earth objects(NEOs), 2017VR12, Camillo, and Midas during the year 2018. The observations were made by the 1-m telescope of Yunnan Observatory over 2 nights. Their precise astrometric positions are derived from 989 CCD observations. The theoretical positions of asteroids are retrieved from the Jet Propulsion Laboratory (JPL) Horizons System and Institut de M\'{e}canique C\'{e}leste et de Calcul des \'{E}ph\'{e}m\'{e}rides (IMCCE). The positions of three asteroids are measured with respect to the stars in Gaia DR2 star catalogue. For 2017 VR12, the mean (O-C) of right ascension and declination are -0.090$^{''}$ and -0.623$^{''}$ based on the ephemeris of published JPL, but the mean (O-C) are 3.122$^{''}$ and -0.636$^{''}$ based on the ephemeris of published IMCCE. The great difference in declination could be explained by several factors. (1)The degenerated CCD images caused by the high apparent motion speed of the object leads to the reduction of positioning accuracy. (2)The poor timing system may bring the system error, especially in the high speed direction. (3)The asteroid may be perturbed by the earth when it approaches the earth too closely. The astrometric results show that the centroid centring method can reduce the dispersion of the non-Gaussian images compared with the PSF model method. For Camillo and Midas, the astrometric results are consistent based on two ephemerides. High-precision timing system, some astronomical effects and geometric distortion of CCD images should be carefully considered in the future works.

Magnetic flux ropes (MFRs) are believed to be the core structure in solar eruptions, nevertheless, their formation remains intensely debated. Here we report a rapid buildup process of an MFR-system during a confined X2.2 class flare occurred on 2017 September 6 in NOAA AR 12673, three hours after which the structure erupted to a major coronal mass ejection (CME) accompanied by an X9.3 class flare. For the X2.2 flare, we do not find EUV dimmings, separation of its flare ribbons, or clear CME signatures, suggesting a confined flare. For the X9.3 flare, large-scale dimmings, separation of its flare ribbons, and a CME show it to be eruptive. By performing a time sequence of nonlinear force-free fields (NLFFFs) extrapolations we find that: until the eruptive flare, an MFR-system was located in the AR. During the confined flare, the axial flux and the lower bound of the magnetic helicity for the MFR-system were dramatically enhanced by about 86% and 260%, respectively, although the mean twist number was almost unchanged. During the eruptive flare, the three parameters were all significantly reduced. The results evidence the buildup and release of the MFR-system during the confined and the eruptive flare, respectively. The former may be achieved by flare reconnection. We also calculate the pre-flare distributions of the decay index above the main polarity inversion line (PIL) and find no significant difference. It indicates that the buildup of the magnetic flux and helicity of the MFR-system may play a role in facilitating its final eruption.

We investigate the formation and magnetic topology of four flare/CME events with filament-sigmoid systems, in which the sigmoidal hot channels are located above the filaments, and they appear in pairs prior to eruption.} The formation of hot channels usually takes several to dozens of hours during which two J-shape sheared arcades gradually evolve into sigmoidal hot channels, then they keep stable for tens of minutes or hours and erupt. While the low-lying filaments show no significant change. \textbf{We construct a series of magnetic field models and find that the best-fit preflare models contain magnetic flux ropes with hyperbolic flux tubes (HFTs). The field lines above the HFT correspond to the high-lying hot channel, while those below the HFT surround the underlying filaments. In particular, the continuous and long field lines representing the flux rope located above the HFT match the observed hot channels well in three events. While for SOL2014-04-18 event, the flux bundle that mimics the observed hot channel is located above the flux rope. The flux rope axis lies in a height range of 19.8 Mm and 46 Mm above the photosphere for the four events, among which the flux rope axis in SOL2012-07-12 event has a maximum height, which probably explains why it is often considered as a double-decker structure. Our modeling suggests that the high-lying hot channel may be formed by magnetic reconnections between sheared field lines occurring above the filament prior to eruption.

Magnetic reconnection is a fundamental physical process in various astrophysical, space, and laboratory environments. Many pieces of evidence for magnetic reconnection have been uncovered. However, its specific processes that could be fragmented and turbulent have been short of direct observational evidence. Here, we present observations of a super-hot current sheet during SOL2017-09-10T X8.2-class solar flare that display the fragmented and turbulent nature of magnetic reconnection. As bilateral plasmas converge toward the current sheet, significant plasma heating and non-thermal motions are detected therein. Two oppositely directed outflow jets are intermittently expelled out of the fragmenting current sheet, whose intensity shows a power-law distribution in spatial frequency domain. The intensity and velocity of the sunward outflow jets also display a power-law distribution in temporal frequency domain. The length-to-width ratio of the current sheet is estimated to be larger than theoretical threshold of and thus ensures occurrence of tearing mode instability. The observations therefore suggest fragmented and turbulent magnetic reconnection occurring in the long stretching current sheet.

Recently a population of compact radio galaxies were classified as Fanaroff-Riley type 0 radio galaxies (FR 0s). The physical nature of FR 0s and the connection with the classical FR I and II galaxies are not currently well understood. Here, we report the radio properties of fourteen FR 0s on parsec (pc) scales derived from their very long baseline interferometry (VLBI) imaging observations. All sources show compact structures. Four sources show relativistic beaming with Doppler boosting factors ranging from 1.7 to 6. The brightness temperatures of the other ten are below the equilibrium limit. Jet proper motions are determined in two sources which have multiple epoch data, between 0.23 c and 0.49 c, implying mildly relativistic jet flow. Low-amplitude flux density variation is found in J0943+3614 over a time period of 10 years. No significant variability are detected in three other sources over time scales of a few years. The radio properties of the FR 0s inferred from the VLBI data resemble GHz-peaked spectrum or compact steep-spectrum sources. Moreover, the diversity of their relativistic beaming indicators (brightness temperature, variability, jet proper motion) also imply that FR 0s might not be a homogeneous population of radio sources. Detailed studies of the low-power FR 0 sources in the local Universe additionally offer a promising opportunity to understand their connection to the FR Is.

In this Letter, we investigate the long-duration quasi-static evolution of 12 pre-eruptive filaments (4 active region and 8 quiescent filaments), mainly focusing on the evolution of the filament height in three dimension (3D) and the decay index of the background magnetic field. The filament height in 3D is derived through two-perspective observations of \textit{Solar Dynamics Observatory} and \textit{Solar TErrestrial RElations Observatory}. The coronal magnetic field is reconstructed using the potential field source surface model. A new finding is that the filaments we studied show two types of long-duration evolution: one type is comprised of a long-duration static phase and a short slow rise phase with a duration of less than 12 hours and a speed of 0.1--0.7 km s$^{-1}$, while the other one only presents a slow rise phase but with an extremely long duration of more than 60 hours and a smaller speed of 0.01--0.2 km s$^{-1}$. At the moment approaching the eruption, the decay index of the background magnetic field at the filament height is similar for both active region and quiescent filaments. The average value and upper limit are $\sim$0.9 and $\sim$1.4, close to the critical index of torus instability. Moreover, the filament height and background magnetic field strength are also found to be linearly and exponentially related with the filament length, respectively.

Coronal loops exist ubiquitously in the solar atmosphere. These loops puzzle astronomers over half a century. Solar magneto-seismology (SMS) provides a unique way to constrain the physical parameters of coronal loops. Here, we study the evolution of oscillations of a coronal loop observed by the Atmospheric Imaging Assembly (AIA). We measure geometric and physical parameters of the loop oscillations. In particular, we find that the mean period of the oscillations increased from 1048 to 1264 s during three oscillatory cycles. We employ the differential emission measure method and apply the tools of SMS. The evolution of densities inside and outside the loop is analyzed. We found that an increase of density inside the loop and decrease of the magnetic field strength along the loop are the main reasons for the increase in the period during the oscillations. Besides, we also found that the amplitude profile of the loop is different from a profile would it be a homogeneous loop. It is proposed that the distribution of magnetic strength along the loop rather than density stratification is responsible for this deviation. The variation in period and distribution of amplitude provide, in terms of SMS, a new and unprecedented insight into coronal loop diagnostics.

Coronal mass ejections are often considered to result from the full eruption of a magnetic flux rope (MFR). However, it is recognized that, in some events, the MFR may release only part of its flux, with the details of the implied splitting not completely established due to limitations in observations. Here, we investigate two partial eruption events including a confined and a successful one. Both partial eruptions are a consequence of the vertical splitting of a filament-hosting MFR involving internal reconnection. A loss of equilibrium in the rising part of the magnetic flux is suggested by the impulsive onset of both events and by the delayed onset of reconnection in the confined event. The remaining part of the flux might be line-tied to the photosphere in a bald patch separatrix surface, and we confirm the existence of extended bald-patch sections for the successful eruption. The internal reconnection is signified by brightenings in the body of one filament and between the rising and remaining parts of both filaments. It evolves quickly into the standard current sheet reconnection in the wake of the eruption. As a result, regardless of being confined or successful, both eruptions produce hard X-ray sources and flare loops below the erupting but above the surviving flux, as well as a pair of flare ribbons enclosing the latter.

Current sheet is believed to be the region of energy dissipation via magnetic reconnection in solar flares. However, its properties, for example, the dynamic process, have not been fully understood. Here we report a current sheet in a solar flare (SOL2017-09-10T16:06) that was clearly observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory as well as the EUV Imaging Spectrometer on Hinode. The high-resolution imaging and spectroscopic observations show that the current sheet is mainly visible in high temperature (>10 MK) passbands, particularly in the Fe XXIV 192.03 line with a formation temperature of ~18 MK. The hot Fe XXIV 192.03 line exhibits very large nonthermal velocities up to 200 km/s in the current sheet, suggesting that turbulent motions exist there. The largest turbulent velocity occurs at the edge of the current sheet, with some offset with the strongest line intensity. At the central part of the current sheet, the turbulent velocity is negatively correlated with the line intensity. From the line emission and turbulent features we obtain a thickness in the range of 7--11 Mm for the current sheet. These results suggest that the current sheet has internal fine and dynamic structures that may help the magnetic reconnection within it proceeds efficiently.

The $\gamma$-ray bright blazar CTA 102 is studied using imaging (new 15 GHz and archival 43 GHz Very Long Baseline Array, VLBA data) and time variable optical flux density, polarization degree and electric vector position angle (EVPA) spanning between 2015 June 1 and 2016 October 1, covering a prominent $\gamma$-ray flare during 2016 January. The pc-scale jet indicates expansion with oscillatory features upto 17 mas. Component proper motions are in the range 0.04 - 0.33 mas/yr with acceleration upto 1.2 mas followed by a slowing down beyond 1.5 mas. A jet bulk Lorentz factor $\geq$ 17.5, position angle of 128.3 degrees, inclination angle $\leq$ 6.6 degrees and intrinsic half opening angle $\leq$ 1.8 degrees are derived from the VLBA data. These inferences are employed in a helical jet model to infer long term variability in flux density, polarization degree, EVPA and a rotation of the Stokes Q and U parameters. A core distance of $r_{\rm core,43 \ GHz}$ = 22.9 pc, and a magnetic field strength at 1 pc and the core location of 1.57 G and 0.07 G respectively are inferred using the core shift method. The study is useful in the context of estimating jet parameters and in offering clues to distinguish mechanisms responsible for variability over different timescales.

White-light flares are the flares with emissions visible in the optical continuum. They are thought to be rare and pose the most stringent requirements in energy transport and heating in the lower atmosphere. Here we present a nearly circular white-light flare on 2015 March 10 that was well observed by the Optical and Near-infrared Solar Eruption Tracer and Solar Dynamics Observatory. In this flare, there appear simultaneously both impulsive and gradual white-light kernels. The generally accepted thick-target model would be responsible for the impulsive kernels but not sufficient to interpret the gradual kernels. Some other mechanisms including soft X-ray backwarming or downward-propagating Alfven waves, acting jointly with electron beam bombardment, provide a possible interpretation. However, the origin of this kind of white-light kernels is still an open question that induces more observations and researches in the future to decipher it.

Radio-loud active galactic nuclei (AGNs), hosting powerful relativistic jet outflows, provide an excellent laboratory for studying jet physics. Very long baseline interferometry (VLBI) enables high-resolution imaging on milli-arcsecond (mas) and sub-mas scales, making it a powerful tool to explore the inner jet structure, shedding light on the formation, acceleration and collimation of AGN jets. In this paper, we present Very Long Baseline Array (VLBA) observations of ten radio-loud AGNs at 43 and 86~GHz, which were selected from the {\it Planck} catalogue of compact sources and are among the brightest in published VLBI images at and below 15 GHz. The image noise levels in our observations are typically 0.3 mJy beam$^{-1}$ and 1.5 mJy beam$^{-1}$ at 43 and 86 GHz, respectively. Compared with the VLBI data observed at lower frequencies from the literature, our observations with higher resolution (the highest resolution up to 0.07 mas at 86 GHz and 0.18 mas at 43 GHz) and at higher frequencies detected new jet components at sub-parsec scales, offering valuable data for studies of the physical properties of innermost jets. These include compactness factor of the radio structure (the ratio of core flux density to total flux density), and core brightness temperature ($T_{\rm b}$). In all these sources, the compact core accounts for a significant fraction ($> 60\%$) of the total flux density. Their correlated flux density at the longest baselines is higher than 0.16 Jy. The compactness of these sources make them good phase calibrators of mm-wavelength ground-based and space VLBI.

We investigate the three-dimensional (3D) magnetic structure of a blowout jet originated in the west edge of NOAA Active Region (AR) 11513 on 02 July 2012 by means of recently developed forced field extrapolation (FFE) model. The results show that the blowout jet was caused by the eruption of the magnetic flux rope (MFR) consisting of twisted field lines. We further calculate the twist number $\mathcal{T}_{w}$ and squashing factor Q of the reconstructed magnetic field and find that (1) the MFR corresponds well to the high $\mathcal{T}_{w}$ region (2) the MFR outer boundary corresponds well to the high Q region, probably interpreting the bright structure at the base of the jet. The twist number of the MFR is estimated to be $\mathcal{T}_{w}=-1.54\pm 0.67$. Thus, the kink instability is regarded as the initiation mechanism of the blowout jet as $\mathcal{T}_{w}$ reaching or even exceeding the threshold value of the kink instability. Our results also indicate that the bright point at the decaying phase is actually comprised of some small loops that are heated by the reconnection occurred above. In summary, the blowout jet is mostly consistent with the scenario proposed by \citet{mcs10} except that the kink instability is found to be a possible trigger.

Coronal mass ejections (CMEs) and solar flares are the large-scale and most energetic eruptive phenomena in our solar system and able to release a large quantity of plasma and magnetic flux from the solar atmosphere into the solar wind. When these high-speed magnetized plasmas along with the energetic particles arrive at the Earth, they may interact with the magnetosphere and ionosphere, and seriously affect the safety of human high-tech activities in outer space. The travel time of a CME to 1 AU is about 1-3 days, while energetic particles from the eruptions arrive even earlier. An efficient forecast of these phenomena therefore requires a clear detection of CMEs/flares at the stage as early as possible. To estimate the possibility of an eruption leading to a CME/flare, we need to elucidate some fundamental but elusive processes including in particular the origin and structures of CMEs/flares. Understanding these processes can not only improve the prediction of the occurrence of CMEs/flares and their effects on geospace and the heliosphere but also help understand the mass ejections and flares on other solar-type stars. The main purpose of this review is to address the origin and early structures of CMEs/flares, from multi-wavelength observational perspective. First of all, we start with the ongoing debate of whether the pre-eruptive configuration, i.e., a helical magnetic flux rope (MFR), of CMEs/flares exists before the eruption and then emphatically introduce observational manifestations of the MFR. Secondly, we elaborate on the possible formation mechanisms of the MFR through distinct ways. Thirdly, we discuss the initiation of the MFR and associated dynamics during its evolution toward the CME/flare. Finally, we come to some conclusions and put forward some prospects in the future.

The topology and dynamics of the three-dimensional magnetic field in the solar atmosphere govern various solar eruptive phenomena and activities, such as flares, coronal mass ejections, and filaments/prominences. We have to observe and model the vector magnetic field to understand the structures and physical mechanisms of these solar activities. Vector magnetic fields on the photosphere are routinely observed via the polarized light, and inferred with the inversion of Stokes profiles. To analyze these vector magnetic fields, we need first to remove the 180$^\circ$ ambiguity of the transverse components and correct the projection effect. Then, the vector magnetic field can be served as the boundary conditions for a force-free field modeling after a proper preprocessing. The photospheric velocity field can also be derived from a time sequence of vector magnetic fields. Three-dimensional magnetic field could be derived and studied with theoretical force-free field models, numerical nonlinear force-free field models, magnetohydrostatic models, and magnetohydrodynamic models. Magnetic energy can be computed with three-dimensional magnetic field models or a time series of vector magnetic field. The magnetic topology is analyzed by pinpointing the positions of magnetic null points, bald patches, and quasi-separatrix layers. As a well conserved physical quantity, magnetic helicity can be computed with various methods, such as the finite volume method, discrete flux tube method, and helicity flux integration method. This quantity serves as a promising parameter characterizing the activity level of solar active regions.

Solar filaments/prominences are one of the most common features in the corona, which may lead to energetic coronal mass ejections (CMEs) and flares when they erupt. Filaments are about one hundred times cooler and denser than the coronal material, and physical understanding of their material origin remains controversial. Two types of scenarios have been proposed: one argues that the filament plasma is brought into the corona from photosphere or chromosphere through a siphon or evaporation/injection process, while the other suggests that the material condenses from the surrounding coronal plasma due to thermal instability. The elemental abundance analysis is a reasonable clue to constrain the models, as the siphon or evaporation/injection model would predict that the filament material abundances are close to the photospheric or chromospheric ones, while the condensation model should have coronal abundances. In this letter, we analyze the elemental abundances of a magnetic cloud that contains the ejected filament material. The corresponding filament eruption occurred on 1998 April 29, accompanying an M6.8 class soft X-ray flare located at the heliographic coordinates S18E20 (NOAA 08210) and a fast halo CME with the linear velocity of 1374 km s$^{-1}$ near the Sun. We find that the abundance ratios of elements with low and high First Ionization Potential such as Fe/O, Mg/O, and Si/O are 0.150, 0.050, and 0.070, respectively, approaching their corresponding photospheric values 0.065, 0.081, and 0.066, which does not support the coronal origin of the filament plasma.

The quasar 3C~286 is one of two compact steep spectrum sources detected by the {\it Fermi}/LAT. Here, we investigate the radio properties of the parsec(pc)-scale jet and its (possible) association with the $\gamma$-ray emission in 3C~286. The Very Long Baseline Interferometry (VLBI) images at various frequencies reveal a one-sided core--jet structure extending to the southwest at a projected distance of $\sim$1 kpc. The component at the jet base showing an inverted spectrum is identified as the core, with a mean brightness temperature of $2.8\times 10^{9}$~K. The jet bends at about 600 pc (in projection) away from the core, from a position angle of $-135^\circ$ to $-115^\circ$. Based on the available VLBI data, we inferred the proper motion speed of the inner jet as $0.013 \pm 0.011$ mas yr$^{-1}$ ($\beta_{\rm app} = 0.6 \pm 0.5$), corresponding to a jet speed of about $0.5\,c$ at an inclination angle of $48^\circ$ between the jet and the line of sight of the observer. The brightness temperature, jet speed and Lorentz factor are much lower than those of $\gamma$-ray-emitting blazars, implying that the pc-scale jet in 3C~286 is mildly relativistic. Unlike blazars in which $\gamma$-ray emission is in general thought to originate from the beamed innermost jet, the location and mechanism of $\gamma$-ray emission in 3C~286 may be different as indicated by the current radio data. Multi-band spectrum fitting may offer a complementary diagnostic clue of the $\gamma$-ray production mechanism in this source.

Magnetic null has long been recognized as a special structure serving as a preferential site for magnetic reconnection (MR). However, the direct observational study of MR at null-points is largely lacking. Here, we show the observations of MR around a magnetic null associated with an eruption that resulted in an M1.7 flare and a coronal mass ejection. The GOES X- ray profile of the flare exhibited two peaks at 02:23 UT and 02:40 UT on 2012 November 8, respectively. Based on the imaging observations, we find that the first and also primary X- ray peak was originated from MR in the current sheet underneath the erupting magnetic flux rope (MFR). On the other hand, the second and also weaker X-ray peak was caused by MR around a null-point located above the pre-eruption MFR. The interaction of the null-point and the erupting MFR can be described as a two-step process. During the first step, the erupting and fast expanding MFR passed through the null-point, resulting in a significant displacement of the magnetic field surrounding the null. During the second step, the displaced magnetic field started to move back, resulting in a converging inflow and subsequently the MR around the null. The null-point reconnection is a different process from the current sheet reconnection in this flare; the latter is the cause of the main peak of the flare, while the former is the cause of the secondary peak of the flare and the conspicuous high-lying cusp structure.

It is believed that type II radio bursts are generated by shock waves. In order to understand the generation conditions of type II radio bursts, in this paper, we analyze the physical parameters of a shock front. The type II radio burst we selected was observed by Siberian Solar Radio Telescope (SSRT) and Learmonth radio station and was associated with a limb CME occurring on 2014 January 8 observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The evolution of the CME in the inner corona presents a double-layered structure that propagates outward. We fit the outer layer of the structure with a partial circle and divide it into 7 directions from -45$^\circ$ to 45$^\circ$ with an angular separation of 15$^\circ$. We measure the outer layer speed along the 7 directions, and find that the speed in the direction of -15$^\circ$ with respect to the central direction is the fastest. We use the differential emission measure (DEM) method to calculate the physical parameters at the outer layer at the moment when the type II radio burst was initiated, including the temperature ($T$), emission measure ($EM$), temperature ratio ($T_{d}/T_{u}$), compression ratio ($X$), and Alfv\'en Mach number ($M_{A}$). We compare the quantities $X$ and $M_{A}$ to that obtained from band-splitting in the radio spectrum, and find that this type II radio burst is generated at a small region of the outer layer that is located at the sector in 45$^\circ$ direction. The results suggest that the generation of type II radio bursts (shock) requires larger values of $X$ and $M_{A}$ rather than simply a higher speed of the disturbance.

We studied the developing conditions of sigmoid structure under the influence of magnetic non-potential characteristics of a rotating sunspot in the active region (AR) 12158. Vector magnetic field measurements from Helioseismic Magnetic Imager and coronal EUV observations from Atmospheric Imaging Assembly reveal that the erupting inverse-S sigmoid had roots in the location of the rotating sunspot. Sunspot rotates at a rate of 0-5deg/h with increasing trend in the first half followed by a decrease. Time evolution of many non-potential parameters had a well correspondence with the sunspot rotation. The evolution of the AR magnetic structure is approximated by a time series of force free equilibria. The NLFFF magnetic structure around the sunspot manifests the observed sigmoid structure. Field lines from the sunspot periphery constitute the body of the sigmoid and those from interior overly the sigmoid similar to a fluxrope structure. While the sunspot is being rotating, two major CME eruptions occurred in the AR. During the first (second) event, the coronal current concentrations enhanced (degraded) consistent with the photospheric net vertical current, however the magnetic energy is released during both the cases. The analysis results suggest that the magnetic connections of the sigmoid are driven by slow motion of sunspot rotation, which transforms to a highly twisted flux rope structure in a dynamical scenario. An exceeding critical twist in the flux rope probably leads to the loss of equilibrium and thus triggering the onset of two eruptions.

We investigate the footpoints of four erupted magnetic flux ropes (MFRs) that appear as sigmoidal hot channels prior to the eruptions in the Atmospheric Imaging Assembly high temperaure passbands. The simultaneous Helioseismic and Magnetic Imager observations disclose that one footpoint of the MFRs originates in the penumbra or penumbra edge with a stronger magnetic field, while the other in the moss region with a weaker magnetic field. The significant deviation of the axis of the MFRs from the main polarity inversion lines and associated filaments suggests that the MFRs have ascended to a high altitude, thus being distinguishable from the source sigmoidal ARs. The more interesting thing is that, with the eruption of the MFRs, the average inclination angle and direct current at the footpoints with stronger magnetic field tend to decrease, which is suggestive of a straightening and untwisting of the magnetic field in the MFR legs. Moreover, the associated flare ribbons also display an interesting evolution. They initially appear as sporadical brightenings at the two footpoints of and in the regions below the MFRs and then quickly extend to two slender sheared J-shaped ribbons with the two hooks corresponding to the two ends of the MFRs. Finally, the straight parts of the two ribbons separate from each other, evolving into two widened parallel ones. These features mostly conforms to and supports the recently proposed three-dimensional standard CME/flare model, i.e., the twisted MFR eruption stretches and leads to the reconnection of the overlying field that transits from a strong to weak shear with the increasing height.

In this paper, we study the formation and early evolution of a limb coronal mass ejection (CME) and its associated shock wave that occurred on 2014 January 8. The extreme ultraviolet (EUV) images provided by the Atmospheric Imaging Assembly (AIA) on board \textit{Solar Dynamics Observatory} disclose that the CME first appears as a bubble-like structure. Subsequently, its expansion forms the CME and causes a quasi-circular EUV wave. Interestingly, both the CME and the wave front are clearly visible at all of the AIA EUV passbands. Through a detailed kinematical analysis, it is found that the expansion of the CME undergoes two phases: a first phase with a strong but transient lateral over-expansion followed by a second phase with a self-similar expansion. The temporal evolution of the expansion velocity coincides very well with the variation of the 25--50 keV hard X-ray flux of the associated flare, which indicates that magnetic reconnection most likely plays an important role in driving the expansion. Moreover, we find that, when the velocity of the CME reaches $\sim$600 km s$^{-1}$, the EUV wave starts to evolve into a shock wave, which is evidenced by the appearance of a type II radio burst. The shock's formation height is estimated to be $\sim$0.2$R_{sun}$, which is much lower than the height derived previously. Finally, we also study the thermal properties of the CME and the EUV wave. We find that the plasma in the CME leading front and the wave front has a temperature of $\sim$2 MK, while that in the CME core region and the flare region has a much higher temperature of $\ge$8 MK.

In this Letter, we present Interface Region Imaging Spectrograph Fe XXI 1354.08 A forbidden line emission of two magnetic flux ropes (MFRs) that caused two fast coronal mass ejections with velocities of $\ge$1000 km s$^{-1}$ and strong flares (X1.6 and M6.5) on 2014 September 10 and 2015 June 22, respectively. The EUV images at the 131 A and 94 A passbands provided by the Atmospheric Imaging Assembly on board Solar Dynamics Observatory reveal that both MFRs initially appear as suspended hot channel-like structures. Interestingly, part of the MFRs is also visible in the Fe XXI 1354.08 forbidden line, even prior to the eruption, e.g., for the SOL2014-09-10 event. However, the line emission is very weak and that only appears at a few locations but not the whole structure of the MFRs. This implies that the MFRs could be comprised of different threads with different temperatures and densities, based on the fact that the formation of the Fe XXI forbidden line requires a critical temperature ($\sim$11.5 MK) and density. Moreover, the line shows a non-thermal broadening and a blueshift in the early phase. It suggests that magnetic reconnection at that time has initiated; it not only heats the MFR and, at the same time, produces a non-thermal broadening of the Fe XXI line but also produces the poloidal flux, leading to the ascending of the MFRs.

Magnetic clouds (MCs) are the interplanetary counterpart of coronal magnetic flux ropes. They can provide valuable information to reveal the flux rope characteristics at their eruption stage in the corona, which are unable to be explored in situ at present. In this paper, we make a comprehensive survey of the average iron charge state (<Q>Fe) distributions inside 96 MCs for solar cycle 23 using ACE (Advanced Composition Explorer) data. As the <Q>Fe in the solar wind are typically around 9+ to 11+, the Fe charge state is defined as high when the <Q>Fe is larger than 12+, which implies the existence of a considerable amount of Fe ions with high charge states (e.g., \geq 16+). The statistical results show that the <Q>Fe distributions of 92 (~ 96%) MCs can be classified into four groups with different characteristics. In group A (11 MCs), the <Q>Fe shows a bimodal distribution with both peaks higher than 12+. Group B (4 MCs) presents a unimodal distribution of <Q>Fe with its peak higher than 12+. In groups C (29 MCs) and D (48 MCs), the <Q>Fe remains higher and lower than 12+ throughout ACE passage through the MC, respectively. Possible explanations to these distributions are discussed.

Magnetic reconnection is a rapid energy release process that is believed to be responsible for flares on the Sun and stars. Nevertheless, such flare-related reconnection is mostly detected to occur in the corona, while there have been few studies concerning the reconnection in the chromosphere or photosphere. Here we present both spectroscopic and imaging observations of magnetic reconnection in the chromosphere leading to a microflare. During the flare peak time, chromospheric line profiles show significant blueshifted/redshifted components on the two sides of the flaring site, corresponding to upflows and downflows with velocities of $\pm$(70--80) km s$^{-1}$, comparable with the local Alfv\'{e}n speed as expected by the reconnection in the chromosphere. The three-dimensional nonlinear force-free field configuration further discloses twisted field lines (a flux rope) at a low altitude, cospatial with the dark threads in He I 10830 \r{A} images. The instability of the flux rope may initiate the flare-related reconnection. These observations provide clear evidence of magnetic reconnection in the chromosphere and show the similar mechanisms of a microflare to those of major flares.

Two-ribbon brightenings are one of the most remarkable characteristics of an eruptive solar flare and are often used for predicting the occurrence of coronal mass ejections (CMEs). Nevertheless, it was called in question recently whether all two-ribbon flares are eruptive. In this paper, we investigate a two ribbon-like white-light (WL) flare that is associated with a failed magnetic flux rope (MFR) eruption on 2015 January 13, which has no accompanying CME in the WL coronagraph. Observations by \textit{Optical and Near-infrared Solar Eruption Tracer} and \textit{Solar Dynamics Observatory} reveal that, with the increase of the flare emission and the acceleration of the unsuccessfully erupting MFR, two isolated kernels appear at the WL 3600 {\AA} passband and quickly develop into two elongated ribbon-like structures. The evolution of the WL continuum enhancement is completely coincident in time with the variation of \textit{Fermi} hard X-ray 26--50 keV flux. Increase of continuum emission is also clearly visible at the whole FUV and NUV passbands observed by \textit{Interface Region Imaging Spectrograph}. Moreover, in one WL kernel, the \ion{Si}{4}, \ion{C}{2}, and \ion{Mg}{2} h/k lines display significant enhancement and non-thermal broadening. However, their Doppler velocity pattern is location-dependent. At the strongly bright pixels, these lines exhibit a blueshift; while at moderately bright ones, the lines are generally redshifted. These results show that the failed MFR eruption is also able to produce a two-ribbon flare and high-energy electrons that heat the lower atmosphere, causing the enhancement of the WL and FUV/NUV continuum emissions and chromospheric evaporation.

Hot channels (HCs), high temperature erupting structures in the lower corona of the Sun, have been proposed as a proxy of magnetic flux ropes (MFRs) since their initial discovery. However, it is difficult to make definitive proof given the fact that there is no direct measurement of magnetic field in the corona. An alternative way is to use the magnetic field measurement in the solar wind from in-situ instruments. On 2012 July 12, an HC was observed prior to and during a coronal mass ejection (CME) by the AIA high-temperature images. The HC is invisible in the EUVI low-temperature images, which only show the cooler leading front (LF). However, both the LF and an ejecta can be observed in the coronagraphic images. These are consistent with the high temperature and high density of the HC and support that the ejecta is the erupted HC. In the meanwhile, the associated CME shock was identified ahead of the ejecta and the sheath through the COR2 images, and the corresponding ICME was detected by \textit{ACE}, showing the shock, sheath and magnetic cloud (MC) sequentially, which agrees with the coronagraphic observations. Further, the MC contained a low-ionization-state center and a high-ionization-state shell, consistent with the pre-existing HC observation and its growth through magnetic reconnection. All of these observations support that the MC detected near the Earth is the counterpart of the erupted HC in the corona for this event. Therefore, our study provides strong observational evidence of the HC as an MFR.

Magnetic reconnection, a change of magnetic field connectivity, is a fundamental physical process in which magnetic energy is released explosively. It is responsible for various eruptive phenomena in the universe. However, this process is difficult to observe directly. Here, the magnetic topology associated with a solar reconnection event is studied in three dimensions (3D) using the combined perspectives of two spacecraft. The sequence of extreme ultraviolet (EUV) images clearly shows that two groups of oppositely directed and non-coplanar magnetic loops gradually approach each other, forming a separator or quasi-separator and then reconnecting. The plasma near the reconnection site is subsequently heated from $\sim$1 to $\ge$5 MK. Shortly afterwards, warm flare loops ($\sim$3 MK) appear underneath the hot plasma. Other observational signatures of reconnection, including plasma inflows and downflows, are unambiguously revealed and quantitatively measured. These observations provide direct evidence of magnetic reconnection in a 3D configuration and reveal its origin.

Accurately predicting the arrival of coronal mass ejections (CMEs) at the Earth based on remote images is of critical significance in the study of space weather. In this paper, we make a statistical study of 21 Earth directed CMEs, exploring in particular the relationship between CME initial speeds and transit times. The initial speed of a CME is obtained by fitting the CME with the Graduated Cylindrical Shell model and is thus free of projection effects. We then use the drag force model to fit results of the transit time versus the initial speed. By adopting different drag regimes, i.e., the viscous, aerodynamics, and hybrid regimes, we get similar results, with the least mean estimation error of the hybrid model of 12.9 hours. CMEs with a propagation angle (the angle between the propagation direction and the Sun-Earth line) larger than its half angular width arrive at the Earth with an angular deviation caused by factors other than the radial solar wind drag. The drag force model cannot be well applied to such events. If we exclude these events in the sample, the prediction accuracy can be improved, i.e., the estimation error reduces to 6.8 hours. This work suggests that it is viable to predict the arrival time of CMEs at the Earth based on the initial parameters with a fairly good accuracy. Thus, it provides a method of space weather forecast of 1--5 days following the occurrence of CMEs.

Filament eruptions often lead to coronal mass ejections (CMEs), which can affect critical technological systems in space and on the ground when they interact with the geo-magnetosphere in high speeds. Therefore, it is an important issue to investigate the acceleration mechanisms of CMEs in solar/space physics. Based on observations and simulations, the resistive magnetic reconnection and the ideal instability of magnetic flux rope have been proposed to accelerate CMEs. However, it remains elusive whether both of them play a comparable role during a particular eruption. It has been extremely difficult to separate their contributions as they often work in a close time sequence during one fast acceleration phase. Here we report an intriguing filament eruption event, which shows two apparently separated fast acceleration phases and provides us an excellent opportunity to address the issue. Through analyzing the correlations between velocity (acceleration) and soft (hard) X-ray profiles, we suggest that the instability and magnetic reconnection make a major contribution during the first and second fast acceleration phases, respectively. Further, we find that both processes have a comparable contribution to accelerate the filament in this event.

The second peak in the Fe XVI 33.5 nm line irradiance observed during solar flares by Extreme ultraviolet Variability Experiment (EVE) is known as Extreme UltraViolet (EUV) late phase. Our previous paper (Liu et al. 2013) found that the main emissions in the late phase are originated from large-scale loop arcades that are closely connected to but different from the post flare loops (PFLs), and we also proposed that a long cooling process without additional heating could explain the late phase. In this paper, we define the extremely large late phase because it not only has a bigger peak in the warm 33.5 irradiance profile, but also releases more EUV radiative energy than the main phase. Through detailedly inspecting the EUV images from three point-of-view, it is found that, besides the later phase loop arcades, the more contribution of the extremely large late phase is from a hot structure that fails to erupt. This hot structure is identified as a flux rope, which is quickly energized by the flare reconnection and later on continuously produces the thermal energy during the gradual phase. Together with the late-phase loop arcades, the fail to erupt flux rope with the additional heating create the extremely large EUV late phase.

Solar flares typically have an impulsive phase that followed by a gradual phase as best seen in soft X-ray emissions. A recent discovery based on the EUV Variability Experiment (EVE) observations onboard the Solar Dynamics Observatory (SDO) reveals that some flares exhibit a second large peak separated from the first main phase peak by tens of minutes to hours, which is coined as the flare's EUV late phase. In this paper, we address the origin of the EUV late phase by analyzing in detail two late phase flares, an M2.9 flare on 2010 October 16 and an M1.4 flare on 2011 February 18, using multi-passband imaging observations from the Atmospheric Imaing Assembly (AIA) onboard SDO. We find that: (1) the late phase emission originates from a different magnetic loop system, which is much larger and higher than the main phase loop system. (2) The two loop systems have different thermal evolution. While the late phase loop arcade reaches its peak brightness progressively at a later time spanning for more than one hour from high to low temperatures, the main phase loop arcade reaches its peak brightness at almost the same time (within several minutes) in all temperatures. (3) Nevertheless, the two loop systems seem to be connected magnetically, forming an asymmetric magnetic quadruple configuration. (4) Further, the footpoint brightenings in UV wavelengths show a systematic delay of about one minute from the main flare region to the remote footpoint of the late phase arcade system. We argue that the EUV late phase is the result of a long-lasting cooling process in the larger magnetic arcade system.

In this paper, we report our multiwavelength observations of a partial filament eruption event in NOAA active region 11283 on 2011 September 8. A magnetic null point and the corresponding spine and separatrix surface are found in the active region. Beneath the null point, a sheared arcade supports the filament along the highly complex and fragmented polarity inversion line. After being activated, the sigmoidal filament erupted and split into two parts. The major part rose at the speeds of 90$-$150 km s$^{-1}$ before reaching the maximum apparent height of $\sim$115 Mm. Afterwards, it returned to the solar surface in a bumpy way at the speeds of 20$-$80 km s$^{-1}$. The rising and falling motions were clearly observed in the extreme-ultravoilet (EUV), UV, and H$\alpha$ wavelengths. The failed eruption of the main part was associated with an M6.7 flare with a single hard X-ray source. The runaway part of the filament, however, separated from and rotated around the major part for $\sim$1 turn at the eastern leg before escaping from the corona, probably along large-scale open magnetic field lines. The ejection of the runaway part resulted in a very faint coronal mass ejection (CME) that propagated at an apparent speed of 214 km s$^{-1}$ in the outer corona. The filament eruption also triggered transverse kink-mode oscillation of the adjacent coronal loops in the same AR. The amplitude and period of the oscillation were 1.6 Mm and 225 s. Our results are important for understanding the mechanisms of partial filament eruptions and provide new constraints to theoretical models. The multiwavelength observations also shed light on space weather prediction.

Type II radio bursts are thought to be a signature of coronal shocks. In this paper, we analyze a short-lived type II burst that started at 07:40 UT on 2011 February 28. By carefully checking white-light images, we find that the type II radio burst is not accompanied by a coronal mass ejection, only with a C2.4 class flare and narrow jet. However, in the extreme-ultraviolet (EUV) images provided by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO), we find a wave-like structure that propagated at a speed of $\sim$ 600 km s$^{-1}$ during the burst. The relationship between the type II radio burst and the wave-like structure is in particular explored. For this purpose, we first derive the density distribution under the wave by the differential emission measure (DEM) method, which is used to restrict the empirical density model. We then use the restricted density model to invert the speed of the shock that produces the observed frequency drift rate in the dynamic spectrum. The inverted shock speed is similar to the speed of the wave-like structure. This implies that the wave-like structure is most likely a coronal shock that produces the type II radio burst. We also examine the evolution of the magnetic field in the flare-associated active region and find continuous flux emergence and cancellation taking place near the flare site. Based on these facts, we propose a new mechanism for the formation of the type II radio burst, i.e., the expansion of the strongly-inclined magnetic loops after reconnected with nearby emerging flux acts as a piston to generate the shock wave.

Helical magnetic flux rope (MFR) is a fundamental structure of corona mass ejections (CMEs) and has been discovered recently to exist as a sigmoidal channel structure prior to its eruption in the extreme ultraviolet (EUV) high temperature passbands of the Atmospheric Imaging Assembly (AIA). However, when and where the MFR is built up are still elusive. In this paper, we investigate two MFRs (MFR1 and MFR2) in detail, whose eruptions produced two energetic solar flares and CMEs on 2014 April 18 and 2014 September 10, respectively. The AIA EUV images reveal that for a long time prior to their eruption, both MFR1 and MFR2 are under formation, which is probably through magnetic reconnection between two groups of sheared arcades driven by the shearing and converging flows in the photosphere near the polarity inversion line. At the footpoints of the MFR1, the \textit{Interface Region Imaging Spectrograph} Si IV, C II, and Mg II lines exhibit weak to moderate redshifts and a non-thermal broadening in the pre-flare phase. However, a relatively large blueshift and an extremely strong non-thermal broadening are found at the formation site of the MFR2. These spectral features consolidate the proposition that the reconnection plays an important role in the formation of MFRs. For the MFR1, the reconnection outflow may propagate along its legs, penetrating into the transition region and the chromosphere at the footpoints. For the MFR2, the reconnection probably takes place in the lower atmosphere and results in the strong blueshift and non-thermal broadening for the Mg II, C II, and Si IV lines.

Hot channel (HC) is a high temperature ($\sim$10 MK) structure in the inner corona revealed first by Atmospheric Imaging Assembly (AIA) on board \textit{Solar Dynamics Observatory}. Eruption of HC is often associated with flare and coronal mass ejection. Previous studies suggest that HC is a good proxy of magnetic flux rope (MFR) in the inner corona, in addition to another well-known MFR candidate, the prominence-cavity structure that is with a normal coronal temperature ($\sim$1-2 MK). In this paper, we report a high temperature structure (HTS, $\sim$1.5 MK) contained in an interplanetary coronal mass ejection induced by an HC eruption. According to the observations of bidirectional electrons, high temperature and density, strong magnetic field, and its association with the shock, sheath, and plasma pile-up region, we suggest that the HTS is the interplanetary counterpart of the HC. The scale of the measured HTS is around 14 R$_\odot$, and it maintained a much higher temperature than the background solar wind even at 1 AU. It is significantly different from the typical magnetic clouds (MCs), which usually have a much lower temperature. Our study suggests that the existence of a corotating interaction region ahead of the HC formed a magnetic container to inhibit the HC expansion and cooling down to a low temperature.

We report the observation of the first two harmonics of the horizontally polarized kink waves excited in a coronal loop system lying at south-east of AR 11719 on 2013 April 11. The detected periods of the fundamental mode ($P_1$), its first overtone ($P_2$) in the northern half, and that in the southern one are $530.2 \pm 13.3$, $300.4 \pm 27.7$, and $334.7 \pm 22.1$ s, respectively. The periods of the first overtone in the two halves are the same considering uncertainties in the measurement. We estimate the average electron density, temperature, and length of the loop system as $(5.1 \pm 0.8) \times 10^8$ cm$^{-3}$, $0.65 \pm 0.06$ MK, and $203.8 \pm 13.8$ Mm, respectively. As a zeroth order estimation, the magnetic field strength, $B = 8.2 \pm 1.0$ G, derived by the coronal seismology using the fundamental kink mode matches with that derived by a potential field model. The extrapolation model also shows the asymmetric and nonuniform distribution of the magnetic field along the coronal loop. Using the amplitude profile distributions of both the fundamental mode and its first overtone, we observe that the antinode positions of both the fundamental mode and its first overtone shift towards the weak field region along the coronal loop. The results indicate that the density stratification and the temperature difference effects are larger than the magnetic field variation effect on the period ratio. On the other hand, the magnetic field variation has a greater effect on the eigenfunction of the first overtone than the density stratification does for this case.

Using the multi-wavelength data from Atmospheric Imaging Assembly on board the Solar Dynamic Observatory, we investigated two successive solar flares, a C5.1 confined flare and an X4.9 ejective flare with a halo coronal mass ejection,in NOAA AR 11990 from 2014 Feb 24 to 25. Before the confined are onset, EUV brightening beneath the filament was detected. As the are began, a twisted helical flux rope (FR) wrapping around the filament moved upward and then stopped, and in the meantime an obvious X-ray source below it was observed. Prior to the ejective X4.9 flare, some pre-existing loop structures in the active region interacted with each other, which produced a brightening region beneath the filament. Meanwhile, a small flaring loop appeared below the interaction region and some new helical lines connecting the far ends of the loop structures was gradually formed and continually added into the former twisted FR. Then, due to the resulting imbalance between the magnetic pressure and tension, the new FR together with the filament erupted outward. Our observations coincide well with tether-cutting model, suggesting that the two flares probably have the same triggering mechanism, i.e., tether-cutting reconnection. To our knowledge, this is the first direct observation of tether-cutting reconnection occurring between the pre-existing loops in active region. In the ejective flare case, the erupting filament exhibited an omega-like kinked structure and underwent an exponential rise after a slow-rise phase, indicating the kink instability might be also responsible for the eruption initiation.

Coronal mass ejections (CMEs) are the most spectacular eruptive phenomena in the solar atmosphere. It is generally accepted that CMEs are results of eruptions of magnetic flux ropes (MFRs). However, a heated debate is on whether MFRs pre-exist before the eruptions or they are formed during the eruptions. Several coronal signatures, \textit{e.g.}, filaments, coronal cavities, sigmoid structures and hot channels (or hot blobs), are proposed as MFRs and observed before the eruption, which support the pre-existing MFR scenario. There is almost no reported observation about MFR formation during the eruption. In this letter, we present an intriguing observation of a solar eruptive event occurred on 2013 November 21 with the Atmospheric Imaging Assembly on board the \textit{Solar Dynamic Observatory}, which shows a detailed formation process of the MFR during the eruption. The process started with the expansion of a low-lying coronal arcade, possibly caused by the flare magnetic reconnection underneath. The newly-formed ascending loops from below further pushed the arcade upward, stretching the surrounding magnetic field. The arcade and stretched magnetic field lines then curved-in just below the arcade vertex, forming an X-point. The field lines near the X-point continued to approach each other and a second magnetic reconnection was induced. It is this high-lying magnetic reconnection that led to the formation and eruption of a hot blob ($\sim$ 10 MK), presumably a MFR, producing a CME. We suggest that two spatially-separated magnetic reconnections occurred in this event, responsible for producing the flare and the hot blob (CME), respectively.

Magnetic flux rope (MFR) is a coherent and helical magnetic field structure that is recently found probably to appear as an elongated hot-channel prior to a solar eruption. In this paper, we investigate the relationship between the hot-channel and associated prominence through analyzing a limb event on 2011 September 12. In the early rise phase, the hot-channel was cospatial with the prominence initially. It then quickly expanded, resulting in a separation of the top of the hot-channel from that of the prominence. Meanwhile, both of them experienced an instantaneous morphology transformation from a $\Lambda$ shape to a reversed-Y shape and the top of these two structures showed an exponential increase in height. These features are a good indication for the occurrence of the kink instability. Moreover, the onset of the kink instability is found to coincide in time with the impulsive enhancement of the flare emission underneath the hot-channel, suggesting that the ideal kink instability likely also plays an important role in triggering the fast flare reconnection besides initiating the impulsive acceleration of the hot-channel and distorting its morphology. We conclude that the hot-channel is most likely the MFR system and the prominence only corresponds to the cool materials that are collected in the bottom of the helical field lines of the MFR against the gravity.

In this paper, we address the formation of a magnetic flux rope (MFR) that erupted on 2012 July 12 and caused a strong geomagnetic storm event on July 15. Through analyzing the long-term evolution of the associated active region observed by the Atmospheric Imaging Assembly and the Helioseismic and Magnetic Imager on board the Solar Dynamics Observatory, it is found that the twisted field of an MFR, indicated by a continuous S-shaped sigmoid, is built up from two groups of sheared arcades near the main polarity inversion line half day before the eruption. The temperature within the twisted field and sheared arcades is higher than that of the ambient volume, suggesting that magnetic reconnection most likely works there. The driver behind the reconnection is attributed to shearing and converging motions at magnetic footpoints with velocities in the range of 0.1--0.6 km s$^{-1}$. The rotation of the preceding sunspot also contributes to the MFR buildup. Extrapolated three-dimensional non-linear force-free field structures further reveal the locations of the reconnection to be in a bald-patch region and in a hyperbolic flux tube. About two hours before the eruption, indications for a second MFR in the form of an S-shaped hot channel are seen. It lies above the original MFR that continuously exists and includes a filament. The whole structure thus makes up a stable double-decker MFR system for hours prior to the eruption. Eventually, after entering the domain of instability, the high-lying MFR impulsively erupts to generate a fast coronal mass ejection and X-class flare; while the low-lying MFR remains behind and continuously maintains the sigmoidicity of the active region.

In the solar corona, magnetic reconnection usually takes place at the singular configuration of magnetic field, in particular near a magnetic null owing to its high susceptibility to perturbations. In this Letter, we report a rare X-shaped structure, encompassing a magnetic null, above a trans-equatorial quadrupole active region group that is well observed by the Atmospheric Imaging Assembly (AIA). The observations show that this X-shaped structure is visible in all AIA EUV passbands and stably exists for days. However, possibly induced by flare activities at the northern part of the quadrupole active region group, the X-shaped structure starts to destabilize and meanwhile a jet erupted near its center at 15:05 UT on 2013 October 7. Through the non-linear force-free field modeling, we identify a magnetic null, which is above the quadrupole polarities and well corresponds to the X-shaped structure. After the jet eruption, the temperature and emission measure of the plasma near the X-shaped structure rise from 2.3 MK and 1.2x10^27 cm-5 at 15:01 UT to 5.4 MK and 3.7x10^27 cm-5 at 15:36 UT, respectively, revealed by the differential emission measure analysis, indicating that magnetic reconnection most likely takes place there to heat the plasma. Moreover, the height of the null has an increase of 10 Mm, which is most likely due to the partial opening of the field lines near the fan surface that makes the null underneath rise to seek for a new equilibrium.

We perform Differential Emission Measure (DEM) analysis of an M7.7 flare that occurred on 2012 July 19 and was well observed by the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamic Observatory. Using the observational data with unprecedented high temporal and spatial resolution from six AIA coronal passbands, we calculate the DEM of the flare and derive the time series of maps of DEM-weighted temperature and emission measure (EM). It is found that, during the flare, the highest EM region is located in the flare loop top with a value varying between 8.4 10^28 cm^-5 and 2.5 10^30 cm^-5. The temperature there rises from 8 MK at about 04:40 UT (the initial rise phase) to a maximum value of 13 MK at about 05:20 UT (the hard X-ray peak). Moreover, we find a hot region that is above the flare loop top with a temperature even up to 16 MK. We also analyze the DEM properties of the reconnection site. The temperature and density there are not as high as that in the loop top and the flux rope, indicating that the main heating may not take place inside the reconnection site. In the end, we examine the dynamic behavior of the flare loops. Along the flare loop, both the temperature and the EM are the highest in the loop top and gradually decrease towards the footpoints. In the northern footpoint, an upward force appears with a biggest value in the impulsive phase, which we conjecture originates from chromospheric evaporation.

In this presentation, we report for the first time the detailed temperature evolution process of the magnetic flux rope in a failed solar eruption. Occurred on January 05, 2013, the flux rope was impulsively accelerated to a speed of ~ 400 km/s in the first minute, then decelerated and came to a complete stop in two minutes. The failed eruption resulted in a large-size high-lying (~ 100 Mm above the surface) high-temperature "fire ball" sitting in the corona for more than two hours. The time evolution of the thermal structure of the flux rope was revealed through the differential emission measure analysis technique, which produced temperature maps using observations of the Atmospheric Imaging Assembly on board Solar Dynamic Observatory. The average temperature of the flux rope steadily increased from ~ 5 MK to ~ 10 MK during the first nine minutes of the evolution, which was much longer than the rise time (about three minutes) of the associated soft X-ray flare. We suggest that the flux rope be heated by the energy release of the continuing magnetic reconnection, different from the heating of the low-lying flare loops, which is mainly produced by the chromospheric plasma evaporation. The loop arcade overlying the flux rope was pushed up by ~ 10 Mm during the attempted eruption. The pattern of the velocity variation of the loop arcade strongly suggests that the failure of the eruption be caused by the strapping effect of the overlying loop arcade.

To study the build up of a magnetic flux rope before a major flare and coronal mass ejection (CME), we compute the magnetic helicity injection, twist accumulation, and the topology structure of the three dimensional magnetic field, which is derived by the nonlinear force-free field model. The Extreme-ultraviolet Imaging Telescope on board the Solar and Heliospheric Observatory observed a series of confined flares without any CME before a major flare with a CME at 23:02 UT on 2005 January 15 in active region NOAA 10720. We derive the vector velocity at eight time points from 18:27 UT to 22:20 UT with the differential affine velocity estimator for vector magnetic fields, which were observed by the Digital Vector Magnetograph at Big Bear Solar Observatory. The injected magnetic helicity is computed with the vector magnetic and velocity fields. The helicity injection rate was (-16.47 \pm 3.52) \times 10^{40} Mx^2/hr. We find that only about 1.8% of the injected magnetic helicity became finally the internal helicity of the magnetic flux rope, whose twist increasing rate was -0.18 \pm 0.08 Turns/hr. The quasi-separatrix layers (QSLs) of the three dimensional magnetic field are computed by evaluating the squashing degree, Q. We find that the flux rope was wrapped by QSLs with large Q values, where the magnetic reconnection induced by the continuously injected magnetic helicity further produced the confined flares. We suggest that the flux rope was built up and heated by the magnetic reconnection in the QSLs.

The magnetic flux rope (MFR) is believed to be the underlying magnetic structure of coronal mass ejections (CMEs). However, it remains unclear how an MFR evolves into and forms the multi-component structure of a CME. In this paper, we perform a comprehensive study of an extreme-ultraviolet (EUV) MFR eruption on 2013 May 22 by tracking its morphological evolution, studying its kinematics, and quantifying its thermal property. As EUV brightenings begin, the MFR starts to rise slowly and shows helical threads winding around an axis. Meanwhile, cool filamentary materials descend spirally down to the chromosphere. These features provide direct observational evidence of intrinsically helical structure of the MFR. Through detailed kinematical analysis, we find that the MFR evolution experiences two distinct phases: a slow rise phase and an impulsive acceleration phase. We attribute the first phase to the magnetic reconnection within the quasi-separatrix-layers surrounding the MFR, and the much more energetic second phase to the fast magnetic reconnection underneath the MFR. We suggest that the transition between these two phases be caused by the torus instability. Moreover, we identify that the MFR evolves smoothly into the outer corona and appears as a coherent structure within the white light CME volume. The MFR in the outer corona was enveloped by bright fronts that originated from plasma pile-up in front of the expanding MFR. The fronts are also associated with the preceding sheath region followed the outmost MFR-driven shock.

We investigate two successive flux rope (FR1 and FR2) eruptions resulting in two coronal mass ejections (CMEs) on 2012 January 23. Both FRs appeared as an EUV channel structure in the images of high temperature passbands of the Atmospheric Imaging Assembly prior to the CME eruption. Through fitting their height evolution with a function consisting of linear and exponential components, we determine the onset time of the FR impulsive acceleration with high temporal accuracy for the first time. Using this onset time, we divide the evolution of the FRs in the low corona into two phases: a slow rise phase and an impulsive acceleration phase. In the slow rise phase of the FR1, the appearance of sporadic EUV and UV brightening and the strong shearing along the polarity inverse line indicates that the quasi-separatrix-layer reconnection likely initiates the slow rise. On the other hand for the FR2, we mainly contribute its slow rise to the FR1 eruption, which partially opened the overlying field and thus decreased the magnetic restriction. At the onset of the impulsive acceleration phase, the FR1 (FR2) reaches the critical height of 84.4$\pm$11.2 Mm (86.2$\pm$13.0 Mm) where the decline of the overlying field with height is fast enough to trigger the torus instability. After a very short interval ($\sim$2 minutes), the flare emission began to enhance. These results reveal the compound activity involving multiple magnetic FRs and further suggest that the ideal torus instability probably plays the essential role of initiating the impulsive acceleration of CMEs.

Recent Solar Dynamic Observatory observations reveal that coronal mass ejections (CMEs) consist of a multi-temperature structure: a hot flux rope and a cool leading front (LF). The flux rope first appears as a twisted hot channel in the Atmospheric Imaging Assembly 94 A and 131 A passbands. The twisted hot channel initially lies along the polarity inversion line and then rises and develops into the semi-circular flux rope-like structure during the impulsive acceleration phase of CMEs. In the meantime, the rising hot channel compresses the surrounding magnetic field and plasma, which successively stack into the CME LF. In this paper, we study in detail two well-observed CMEs occurred on 2011 March 7 and 2011 March 8, respectively. Each of them is associated with an M-class flare. Through a kinematic analysis we find that: (1) the hot channel rises earlier than the first appearance of the CME LF and the onset of the associated flare; (2) the speed of the hot channel is always faster than that of the LF, at least in the field of view of AIA. Thus, the hot channel acts as a continuous driver of the CME formation and eruption in the early acceleration phase. Subsequently, the two CMEs in white-light images can be well reproduced by the graduated cylindrical shell flux rope model. These results suggest that the pre-existing flux rope plays a key role in CME initiation and formation.

In this paper, we study the temperature and density properties of multiple structural components of coronal mass ejections (CMEs) using differential emission measure (DEM) analysis. The DEM analysis is based on the six-passband EUV observations of solar corona from the Atmospheric Imaging Assembly onboard the \emph{Solar Dynamic Observatory}. The structural components studied include the hot channel in the core region (presumably the magnetic flux rope of the CME), the bright loop-like leading front (LF), and coronal dimming in the wake of the CME. We find that the presumed flux rope has the highest average temperature ($>$8 MK) and density ($\sim$1.0 $\times10^{9}$ cm$^{-3}$), resulting in an enhanced emission measure (EM) over a broad temperature range (3 $\leq$ T(MK) $\leq$ 20). On the other hand, the CME LF has a relatively cool temperature ($\sim$2 MK) and a narrow temperature distribution similar to the pre-eruption coronal temperature (1 $\leq$ T(MK) $\leq$ 3). The density in the LF, however, is increased by 2% to 32% compared with that of the pre-eruption corona, depending on the event and location. In coronal dimmings, the temperature is more broadly distributed (1 $\leq$ T(MK) $\leq$ 4), but the density decreases by $\sim$35% to $\sim$40%. These observational results show that: (1) CME core regions are significantly heated, presumably through magnetic reconnection, (2) CME LFs are a consequence of compression of ambient plasma caused by the expansion of the CME core region, and (3) the dimmings are largely caused by the plasma rarefaction associated with the eruption.

For the first time, the kinematic evolution of a coronal wave over the entire solar surface is studied. Full Sun maps can be made by combining images from the Solar Terrestrial Relations Observatory satellites, Ahead and Behind, and the Solar Dynamics Observatory, thanks to the wide angular separation between them. We study the propagation of a coronal wave, also known as "EIT" wave, and its interaction with a coronal hole resulting in secondary waves and/or reflection and transmission. We explore the possibility of the wave obeying the law of reflection of waves. In a detailed example we find that a loop arcade at the coronal hole boundary cascades and oscillates as a result of the EUV wave passage and triggers a wave directed eastwards that appears to have reflected. We find that the speed of this wave decelerates to an asymptotic value, which is less than half of the primary EUV wave speed. Thanks to the full Sun coverage we are able to determine that part of the primary wave is transmitted through the coronal hole. This is the first observation of its kind. The kinematic measurements of the reflected and transmitted wave tracks are consistent with a fast-mode MHD wave interpretation. Eventually, all wave tracks decelerate and disappear at a distance. A possible scenario of the whole process is that the wave is initially driven by the expanding coronal mass ejection and subsequently decouples from the driver and then propagates at the local fast-mode speed.

Explosive energy release is a common phenomenon occurring in magnetized plasma systems ranging from laboratories, Earth's magnetosphere, the solar corona and astrophysical environments. Its physical explanation is usually attributed to magnetic reconnection in a thin current sheet. Here we report the important role of magnetic flux rope structure, a volumetric current channel, in producing explosive events. The flux rope is observed as a hot channel prior to and during a solar eruption from the Atmospheric Imaging Assembly (AIA) telescope on board the Solar Dynamic Observatory (SDO). It initially appears as a twisted and writhed sigmoidal structure with a temperature as high as 10 MK and then transforms toward a semi-circular shape during a slow rise phase, which is followed by fast acceleration and onset of a flare. The observations suggest that the instability of the magnetic flux rope trigger the eruption, thus making a major addition to the traditional magnetic-reconnection paradigm.

We address the nature of EUV waves through direct observations of the formation of a diffuse wave driven by the expansion of a coronal mass ejection (CME) and its subsequent separation from the CME front. The wave and the CME on 2011 June 7 were well observed by Atmospheric Imaging Assembly onboard Solar Dynamic Observatory. Following the solar eruption onset, marked by the beginning of the rapid increasing of the CME velocity and the X-ray flux of accompanying flare, the CME exhibits a strong lateral expansion. During this impulsive expansion phase, the expansion speed of the CME bubble increases from 100 km s$^{-1}$ to 450 km s$^{-1}$ in only six minutes. An important finding is that a diffuse wave front starts to separate from the front of the expanding bubble shortly after the lateral expansion slows down. Also a type-II burst is formed near the time of the separation. After the separation, two distinct fronts propagate with different kinematic properties. The diffuse front travels across the entire solar disk; while the sharp front rises up, forming the CME ejecta with the diffuse front ahead of it. These observations suggest that the previously termed EUV wave is a composite phenomenon and driven by the CME expansion. While the CME expansion is accelerating, the wave front is cospatial with the CME front, thus the two fronts are indiscernible. Following the end of the acceleration phase, the wave moves away from the CME front with gradually an increasing distance between them.

Magnetic flux rope is believed to be an important structural component of coronal mass ejections (CMEs). While there exist much observational evidence of the flux rope after the eruption, e.g., as seen in remote-sensing coronagraph images or in-situ solar wind data, the direct observation of flux ropes during CME impulsive phase has been rare. In this Letter, we present an unambiguous observation of a flux rope still in the formation phase in the low corona. The CME of interest occurred above the east limb on 2010 November 03 with footpoints partially blocked. The flux rope was seen as a bright blob of hot plasma in AIA 131 \AA\ passband (peak temperature ~11 MK) rising from the core of the source active region, rapidly moving outward and stretching upward the surrounding background magnetic field. The stretched magnetic field seemed to curve-in behind the core, similar to the classical magnetic reconnection scenario in eruptive flares. On the other hand, the flux rope appeared as a dark cavity in AIA 211 \AA\ passpand (2.0 MK) and 171 \AA\ passband (0.6 MK); in these relatively cool temperature bands, a bright rim clearly enclosed the dark cavity. The bright rim likely represents the pile-up of the surrounding coronal plasma compressed by the expanding flux rope. The composite structure seen in AIA multiple temperature bands is very similar to that in the corresponding coronagraph images, which consists of a bright leading edge and a dark cavity, commonly believed to be a flux rope.

We investigate the distinct properties of two types of flares: eruptive flares associated with CMEs and confined flares without CMEs. Our sample of study includes nine M and X-class flares, all from the same active region (AR), six of which are confined and three others are eruptive. The confined flares tend to be more impulsive in the soft X-ray time profiles and show more slender shapes in the EIT 195 A images, while the eruptive ones are of long-duration events and show much more extended brightening regions. The location of the confined flares are closer to the center of the AR, while the eruptive flares are at the outskirts. This difference is quantified by the displacement parameter, the distance between the AR center and the flare location: the average displacement of the six confined flares is 16 Mm, while that of eruptive ones is as large as 39 Mm. Further, through nonlinear force-free field extrapolation, we find that the decay index of the transverse magnetic field in the low corona (~10 Mm) have a larger value for eruptive flares than that for confined one. In addition, the strength of the transverse magnetic field over the eruptive flare sites is weaker than that over the confined ones. These results demonstrate that the strength and the decay index of background magnetic field may determine whether or not a flare be eruptive or confined. The implication of these results on CME models is discussed in the context of torus instability of flux rope.

In this letter, we study in detail the evolution of the post-flare loops on 2005 January 15 that occurred between two consecutive solar eruption events, both of which generated a fast halo CME and a major flare. The post-flare loop system, formed after the first CME/flare eruption, evolved rapidly, as manifested by the unusual accelerating rise motion of the loops. Through nonlinear force-free field (NLFFF) models, we obtain the magnetic structure over the active region. It clearly shows that the flux rope below the loops also kept rising accompanied with increasing twist and length. Finally, the post-flare magnetic configuration evolved to a state that resulted in the second CME/flare eruption. This is an event in which the post-flare loops can re-flare in a short period of $\sim$16 hr following the first CME/flare eruption. The observed re-flaring at the same location is likely driven by the rapid evolution of the flux rope caused by the magnetic flux emergence and the rotation of the sunspot. This observation provides valuable information on CME/flare models and their prediction.

It is now generally accepted that the impulsive acceleration of a coronal mass ejection (CME) in the inner corona is closely correlated in time with the main energy release of the associated solar flare. In this paper, we examine in detail the post-impulsive-phase acceleration of a CME in the outer corona, which is the phase of evolution immediately following the main impulsive acceleration of the CME; this phase is believed to correspond to the decay phase of the associated flare. This observational study is based on a statistical sample of 247 CMEs that are associated with M- and X-class GOES soft X-ray flares from 1996 to 2006. We find that, from many examples of events, the CMEs associated with flares with long-decay time (or so-called long-duration flares) tend to have positive post-impulsive-phase acceleration, even though some of them have already obtained a high speed at the end of the impulsive acceleration but do not show a deceleration expected from the aerodynamic dragging of the background solar wind. On the other hand, the CMEs associated with flares of short-decay time tend to have significant deceleration. In the scattering plot of all events, there is a weak correlation between CME post-impulsive-phase acceleration and flare decay time. The CMEs deviated from the general trend are mostly slow or weak ones associated with flares of short-decay time; the deviation is caused by the relatively stronger solar wind dragging force for these events. The implications of our results on CME dynamics and CME-flare relations are discussed.

In this paper, we analyze the full evolution, from a few days prior to the eruption to the initiation, and the final acceleration and propagation, of the CME that occurred on 2008 April 26 using the unprecedented high cadence and multi-wavelength observations by STEREO. There existed frequent filament activities and EUV jets prior to the CME eruption for a few days. These activities were probably caused by the magnetic reconnection in the lower atmosphere driven by photospheric convergence motions, which were evident in the sequence of magnetogram images from MDI (Michelson Doppler Imager) onboard SOHO. The slow low-layer magnetic reconnection may be responsible for the storage of magnetic free energy in the corona and the formation of a sigmoidal core field or a flux rope leading to the eventual eruption. The occurrence of EUV brightenings in the sigmoidal core field prior to the rise of the flux rope implies that the eruption was triggered by the inner tether-cutting reconnection, but not the external breakout reconnection. During the period of impulsive acceleration, the time profile of the CME acceleration in the inner corona is found to be consistent with the time profile of the reconnection electric field inferred from the footpoint separation and the RHESSI 15-25 keV HXR flux curve of the associated flare. The full evolution of this CME can be described in four distinct phases: the build-up phase, initiation phase, main acceleration phase, and propagation phase. The physical properties and the transition between these phases are discussed, in an attempt to provide a global picture of CME dynamic evolution.