A generic fiber positioning strategy and a fabrication path are presented for microlens-fiber-coupled integral field units. It is assumed that microlens-produced micro-images are carried to the spectrograph input through step-index,multi-mode fiber, but our results apply to micro-pupil reimaging applications as well. Considered are the performance trades between the filling percentage of the fiber core with the micro-image versus throughput and observing efficiency.A merit function is defined as the product of the transmission efficiency and the etendue loss. For a hexagonal packing of spatial elements, the merit function has been found to be maximized to 94% of an ideal fiber IFU merit value (which has zero transmission loss and does not increase the etendue) with a microlens-fiber alignment (centering) tolerance of 1 um RMS. The maximum acceptable relative tilt between the fiber and the microlens face has been analyzed through optical modeling and found to be 0.3 degree RMS for input f-ratio slower than f/3.5 but it is much more relaxed for faster beams. Several options of fabricating fiber holders have been compared to identify cost-effective solutions that deliver the desired fiber positioning accuracy. Femto-second laser-drilling methods deliver holes arrayed on plates with a position and diameter accuracy of 1.5 um RMS, and with an aspect ratio of 1:10. A commercial vendor produces plates with thickness of 5 mm, but with similar (1 um RMS) positioning accuracy. Both of these techniques are found to be moderately expensive. A purely photo-lithographic technique performed at WCAM (a facility at the University of Wisconsin, Madison), in tandem with deep reactive ion etching, has been used to produce a repeatable recipe with 100% yield. Photo-lithography is more precise (0.5 um RMS) in terms of hole positioning and similar diameter accuracy (1 um RMS).

Hot stellar systems (HSS) are a collection of stars bound together by gravitational attraction. These systems hold clues to many mysteries of outer space so understanding their origin, evolution and physical properties is important but remains a huge challenge. We used multivariate $t$-mixtures model-based clustering to analyze 13456 hot stellar systems from Misgeld & Hilker (2011) that included 12763 candidate globular clusters and found eight homogeneous groups using the Bayesian Information Criterion (BIC). A nonparametric bootstrap procedure was used to estimate the confidence of each of our clustering assignments. The eight obtained groups can be characterized in terms of the correlation, mass, effective radius and surface density. Using conventional correlation-mass-effective radius-surface density notation, the largest group, Group 1, can be described as having positive-low-low-moderate characteristics. The other groups, numbered in decreasing sizes are similarly characterised, with Group 2 having positive-low-low-high characteristics, Group 3 displaying positive-low-low-moderate characteristics, Group 4 having positive-low-low-high characteristic, Group 5 displaying positive-low-moderate-moderate characteristic and Group 6 showing positive-moderate-low-high characteristic. The smallest group (Group 8) shows negative-low-moderate-moderate characteristic. Group 7 has no candidate clusters and so cannot be similarly labeled but the mass, effective radius correlation for these non-candidates indicates that they zare larger than typical globular clusters. Assertions drawn for each group are ambiguous for a few HSS having low confidence in classification. Our analysis identifies distinct kinds of HSS with varying confidence and provides novel insight into their physical and evolutionary properties.

We propose in this White Paper a concept for a space experiment using cold atoms to search for ultra-light dark matter, and to detect gravitational waves in the frequency range between the most sensitive ranges of LISA and the terrestrial LIGO/Virgo/KAGRA/INDIGO experiments. This interdisciplinary experiment, called Atomic Experiment for Dark Matter and Gravity Exploration (AEDGE), will also complement other planned searches for dark matter, and exploit synergies with other gravitational wave detectors. We give examples of the extended range of sensitivity to ultra-light dark matter offered by AEDGE, and how its gravitational-wave measurements could explore the assembly of super-massive black holes, first-order phase transitions in the early universe and cosmic strings. AEDGE will be based upon technologies now being developed for terrestrial experiments using cold atoms, and will benefit from the space experience obtained with, e.g., LISA and cold atom experiments in microgravity. This paper is based on a submission (v1) in response to the Call for White Papers for the Voyage 2050 long-term plan in the ESA Science Programme. ESA limited the number of White Paper authors to 30. However, in this version (v2) we have welcomed as supporting authors participants in the Workshop on Atomic Experiments for Dark Matter and Gravity Exploration held at CERN: ({\tt https://indico.cern.ch/event/830432/}), as well as other interested scientists, and have incorporated additional material.

We present fore-optics and calibration unit design of Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS). DOTIFS fore-optics is designed to modify the focal ratio of the light and to match its plate scale to the physical size of Integral Field Units (IFUs). The fore-optics also delivers a telecentric beam to the IFUs on the telescope focal plane. There is a calibration unit part of which is combined with the fore-optics to have a light and compact system. We use Xenon-arc lamp as a continuum source and Krypton/Mercury-Neon lamps as wavelength calibration sources. Fore-optics and calibration unit shares two optical lenses to maintain compactness of the overall subsystem. Here we present optical and opto-mechanical design of the calibration unit and fore-optics as well as calibration scheme of DOTIFS.

Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-Integral Field Unit (IFU) instrument, planned to be mounted on the 3.6m Devasthal optical telescope in Nainital, India. It has eight identical, fiber-fed spectrographs to disperse light coming from 16 IFUs. The spectrographs produce 2,304 spectra over a 370-740nm wavelength range simultaneously with a spectral resolution of R=1200-2400. It is composed of all-refractive, all spherical optics designed to achieve on average 26.0% throughput from the telescope to the CCD with the help of high transmission spectrograph optics, volume phase holographic grating, and graded coated e2v 2K by 4K CCD. We present the optical and opto-mechanical design of the spectrograph as well as current development status. Optics and optomechanical components for the spectrographs are being fabricated.

Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) is a new multi-object Integral Field Spectrograph (IFS) being designed and fabricated by the Inter-University Center for Astronomy and Astrophysics (IUCAA), Pune, India, for the Cassegrain side port of the 3.6m Devasthal Optical Telescope, (DOT) being constructed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital. It is mainly designed to study the physics and kinematics of the ionized gas, star formation and H II regions in the nearby galaxies. It is a novel instrument in terms of multi-IFU, built in deployment system, and high throughput. It consists of one magnifier, 16 integral field units (IFUs), and 8 spectrographs. Each IFU is comprised of a microlens array and optical fibers and has 7.4'' x 8.7'' field of view with 144 spaxel elements, each sampling 0.8'' hexagonal aperture. The IFUs can be distributed on the telescope side port over an 8' diameter focal plane by the deployment system. Optical fibers deliver light from the IFUs to the spectrographs. Eight identical, all refractive, dedicated spectrographs will produce 2,304 R~1800 spectra over 370-740nm wavelength range with a single exposure. Volume Phase Holographic gratings are chosen to make smaller optics and get high throughput. The total throughput of the instrument including the telescope is predicted as 27.5% on average. Observing techniques, data simulator and reduction software are also under development. Currently, conceptual and baseline design review has been done. Some of the components have already been procured. The instrument is expected to see its first light in 2016.

IUCAA Digital Sampling Array Controller (IDSAC) is a flexible and generic yet powerful CCD controller which can handle a wide range of scientific detectors. Based on an easily scalable modular backplane architecture consisting of Single Board Controllers (SBC), IDSAC can control large detector arrays and mosaics. Each of the SBCs offers the full functionality required to control a CCD independently. The SBCs can be cold swapped without the need to reconfigure them. Each SBC can handle data from up to four video channels with or without dummy outputs at speeds up to 500 kilo Pixels Per Second (kPPS) Per Channel with a resolution of 16 bits. Communication with Linux based host computer is through a USB3.0 interface, with the option of using copper or optical fibers. A Field Programmable Gate Array (FPGA) is used as the master controller in each SBC which allows great flexibility in optimizing performance by adjusting gain, timing signals, bias levels, etc. using user-editable configuration files without altering the circuit topology. Elimination of thermal kTC noise is achieved via Digital Correlated Double Sampling (DCDS). We present the results of noise performance characterization of IDSAC through simulation, theoretical modeling, and actual measurements. The contribution of different types of noise sources is modeled using a tool to predict noise of a generic DCDS signal chain analytically. The analytical model predicts the net input referenced noise of the signal chain to be 5 electrons for 200k pixels per second per channel readout rate with 3 samples per pixel. Using a cryogenic test set up in the lab, the noise is measured to be 5.4 e (24.3 \muV), for the same readout configuration.

A new field re-configuration technique, Multiple Rooks of Chess (MRC), for multiple deployable Integral Field Spectrographs has been developed. The method involves mechanical geometry as well as an optimized deployment algorithm. The geometry is found to be simple for mechanical implementation. The algorithm initially assigns the IFUs to the target objects and then devises the movement sequence based on the current and the desired IFU positions. The reconfiguration time using the suitable actuators which runs at 20 cm/s is found to be a maximum of 25 seconds for the circular DOTIFS focal plane (180 mm diameter). The Geometry Algorithm Combination (GAC) has been tested on several million mock target configurations with object-to-IFU ({\tau} ) ratio varying from 0.25 to 16. The MRC method is found to-be efficient in target acquisition in terms of field revisit and deployment time without any collision or entanglement of the fiber bundles. The efficiency of the technique does not get affected by the increase in number density of target objects. The technique is compared with other available methods based on sky coverage, flexibility and overhead time. The proposed geometry and algorithm combination is found to have an advantage in all of the aspects.

Determining the kinds of gamma-ray bursts (GRBs) has been of interest to astronomers for many years. We analyzed 1599 GRBs from the Burst and Transient Source Experiment (BATSE) 4Br catalogue using $t$-mixtures-model-based clustering on all nine observed parameters ($T_{50}$, $T_{90}$, $F_1$, $F_2$, $F_3$, $F_4$, $P_{64}$, $P_{256}$, $P_{1024}$) and found evidence of five types of GRBs. Our results further refine the findings of Chattopadhyay and Maitra (2017) by providing groups that are more distinct. Using the Mukherjee et al. (1998) classification scheme, also used by Chattopadhyay and Maitra (2017), of duration, total fluence ($F_t = F_1 + F_2 + F_3 + F_4$)) and spectrum (using Hardness Ratio $H_{321} = F_3/(F_1 + F_2)$) our five groups are classified as long-intermediate-intermediate, short-faint-intermediate, short-faint-soft, long-bright-hard, and long-intermediate-hard. We also classify 374 GRBs in the BATSE catalogue that have incomplete information in some of the observed variables (mainly the four time integrated fluences $F_1$, $F_2$, $F_3$ and $F_4$) to the five groups obtained, using the 1599 GRBs having complete information in all the observed variables. Our classification scheme puts 138 GRBs in the first group, 52 GRBs in the second group, 33 GRBs in the third group, 127 GRBs in the fourth group and 24 GRBs in the fifth group.

We present a novel photolithography based technique to efficiently fabricate microlens-fibre based Integral Field Units (IFUs). These IFUs are being developed for Devasthal Optical Telescope Integral Field Spectrograph (DOTIFS) which offer sixteen deployable IFUs. In each IFU, a 12 x 12 microlens array is matched with a similar array of fibres to better than +/- 5 micron accuracy for each microlens-fibre pair in the array. A mask created on copper foils using photolithography, transfer the pupil spot pattern of each microlens array to a fibre array holder. The approach can be used for mass production of IFUs in an extremely efficient and cost-effective manner.

IUCAA Digital Sampling Array Controller (IDSAC) is a generic CCD Controller which is flexible and powerful enough to control a wide variety of CCDs and CMOS detectors used for ground-based astronomy. It has a fully scalable architecture, which can control multiple CCDs and can be easily expanded. The controller has a modular backplane architecture consists of Single Board Controller Cards (SBCs) and can control a mosaic or independent of 5 CCDs. Key features of IDSAC contains usage of FPGA as a reconfigurable master controller, implementation of Digital CDS to achieve low noise and ability to process upto four CCD output at 1Mpixels/Sec/Channel with 16-bit resolution. The best feature of IDSAC is it uses the technique of Digital Correlated Double Sampling(DCDS). It is known that CCD video output is dominated by thermal KTC noise contributed from the summing well capacitor of the CCD output circuitry. To eliminate thermal KTC noise Correlated Double Sampling (CDS) is a very standard technique. CDS performed in Digital domain (DCDS) has several advantages over its analog counterpart, such as - less electronics, faster readout and easier post processing. It is also flexible with sampling rate and pixel throughput while maintaining the core circuit topology intact. The noise characterization of the IDSAC CDS signal chain has been performed by analytical modelling, software simulation and practical measurements. Various types of noise such as white, pink, power supply, bias etc. has been considered while creating a analytical noise model tool to predict noise of a controller system like IDSAC. Standard test bench softwares like Pspice and Multisim are used to simulate the noise performance while several tests are performed to measure the actual noise of IDSAC.The theoretical calculation matches very well with component level simulation as well as practical measurements within 10% accuracy.

This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.

Clustering methods are an important tool to enumerate and describe the different coherent kinds of Gamma Ray Bursts (GRBs). But their performance can be affected by a number of factors such as the choice of clustering algorithm and inherent associated assumptions, the inclusion of variables in clustering, nature of initialization methods used or the iterative algorithm or the criterion used to judge the optimal number of groups supported by the data. We analyzed GRBs from the BATSE 4Br catalog using $k$-means and Gaussian Mixture Models-based clustering methods and found that after accounting for all the above factors, all six variables -- different subsets of which have been used in the literature -- and that are, namely, the flux duration variables ($T_{50}$, $T_{90}$), the peak flux ($P_{256}$) measured in 256-millisecond bins, the total fluence ($F_t$) and the spectral hardness ratios ($H_{32}$ and $H_{321}$) contain information on clustering. Further, our analysis found evidence of five different kinds of GRBs and that these groups have different kinds of dispersions in terms of shape, size and orientation. In terms of duration, fluence and spectrum, the five types of GRBs were characterized as intermediate/faint/intermediate, long/intermediate/soft, intermediate/intermediate/intermediate, short/faint/hard and long/bright/intermediate.

In this paper, we will analyse the cosmological models in Einstein-aether gravity, which is a modified theory of gravity in which a time-like vector field breaks the Lorentz symmetry. We will use this formalism to analyse different cosmological models with different behavior of the scale factor. In this analysis, we will use a certain functional dependence of the dark energy on the Hubble parameter. It will be demonstrated that the aether vector field has a non-trivial effect on these cosmological models. We will also perform the \emph{Om} diagnostic in Einstein-aether gravity. Thus, we will fit parameters of the cosmological models using recent observational data.

In this paper, we study the Power Law Entropy Corrected Holographic Dark Energy (PLECHDE) model in the framework of a non-flat Universe and of Ho\v{r}ava-Lifshitz cosmology with infrared cut-off given by recently proposed Granda-Oliveros cut-off, which contains one term proportional to the Hubble parameter squared $H^2$ and one term proportional to the first time derivative of the Hubble parameter $\dot{H}$. Moreover, this cut-off is characterized by two constant parameters, $\alpha$ and $\beta$. For the two cases corresponding to non-interacting and interacting DE and Dark Matter (DM), we derive the evolutionary form of the energy density of DE $\Omega_D'$, the Equation of State (EoS) parameter of DE $\omega_D$ and the deceleration parameter $q$. Using the parametrization of the EoS parameter $\omega_D\left(z\right)=\omega_0+\omega_1 z$, we obtain the expressions of the two parameters $\omega_0$ and $\omega_1$. We also study the statefinder parameters $\left\{ r,s \right\}$, the snap and lerk cosmographic parameters and the squared speed of the sound $v_s^2$. We also calculate the values of the quantities we study for different values of the running parameter $\lambda$ and for different set of values of $\alpha$ and $\beta$.

The maximum likelihood estimator is used to determine fit parameters for various parametric models of the Fourier periodogram followed by the selection of the best fit model amongst competing models using the Akaike information criteria. This analysis, when applied to light curves of active galactic nuclei can be used to infer the presence of quasi-periodicity and break or knee frequencies. The extracted information can be used to place constraints on the mass, spin and other properties of the putative central black hole and the region surrounding it through theoretical models involving disk and jet physics.

We report the timing and spatial resolution from the Muon Telescope Detector (MTD) installed in the STAR experiment at RHIC. Cosmic ray muons traversing the STAR detector have an average transverse momentum of 6 GeV/c. Due to their very small multiple scattering, these cosmic muons provide an ideal tool to calibrate the detectors and measure their timing and spatial resolution. The values obtained were ~100 ps and ~1-2 cm, respectively. These values are comparable to those obtained from cosmic-ray bench tests and test beams.

In this work, we have studied the thermodynamic quantities like temperature of the universe, heat capacity and squared speed of sound in generalized gravity theories like Brans-Dicke, Ho$\check{\text r}$ava-Lifshitz and $f(R)$ gravities. We have considered the universe filled with dark matter and dark energy. Also we have considered the equation of state parameters for open, closed and flat models. We have observed that in all cases the equation of state behaves like quintessence. The temperature and heat capacity of the universe are found to decrease with the expansion of the universe in all cases. In Brans-Dicke and $f(R)$ gravity theories the squared speed of sound is found to exhibit increasing behavior for open, closed and flat models and in Ho$\check{\text r}$ava-Lifshitz gravity theory it is found to exhibit decreasing behavior for open and closed models with the evolution of the universe. However, for flat universe, the squared speed of sound remains constant in Ho$\check{\text r}$ava-Lifshitz gravity.