We present the analysis of the hot-Jupiter KELT-7 b using transmission and emission spectroscopy from the Hubble Space Telescope (HST), both taken with the Wide Field Camera 3 (WFC3). Our study uncovers a rich transmission spectrum which is consistent with a cloud-free atmosphere and suggests the presence of H2O and H-. In contrast, the extracted emission spectrum does not contain strong absorption features and, although it is not consistent with a simple blackbody, it can be explained by a varying temperature-pressure profile, collision induced absorption (CIA) and H-. KELT-7 b had also been studied with other space-based instruments and we explore the effects of introducing these additional datasets. Further observations with Hubble, or the next generation of space-based telescopes, are needed to allow for the optical opacity source in transmission to be confirmed and for molecular features to be disentangled in emission.

In the recent years, retrieval analysis of exoplanet atmospheres have been very successful, providing deep insights on the composition and the temperature structure of these worlds via the transit and eclipse methods. Analysis of spectral phase curve observations, which in theory provides even more information, are still limited to a few planets. In the next decade, new facilities such as NASA-JWST and ESA-Ariel will revolutionise the field of exoplanet atmospheres and we expect that a significant time will be spent on spectral phase curve observations. Most current models are still limited in their analysis of phase curve data as they do not consider the planet atmosphere as a whole or they require large computational resources. In this paper we present a semi-analytical model that will allow to compute exoplanet emission spectra at different phase angles. Our model provides a way to simulate a large number of observations while being only about 4 times slower than the traditional forward model for plane parallel primary eclipse. This model, which is based on the newly developed TauREx3 framework (Al-Refaie 2020), will be further developed to allow for phase curve atmospheric retrievals.

In current models used to interpret exoplanet atmospheric observations, the planet mass is treated as a prior and is estimated independently with external methods, such as RV or TTV techniques. This approach is necessary as available spectroscopic data do not have sufficient wavelength coverage and/or SNR to infer the planetary mass. We examine here the impact of mass uncertainties on spectral retrieval analyses for a host of atmospheric scenarios. Our approach is both analytical and numerical: we first use simple approximations to extract analytically the influence of each parameter to the wavelength-dependent transit depth. We then adopt a fully Bayesian retrieval model to quantify the propagation of the mass uncertainty onto other atmospheric parameters. We found that for clear-sky, gaseous atmospheres the posterior distributions are the same when the mass is known or retrieved. The retrieved mass is very accurate, with a precision of more than 10%, provided the wavelength coverage and S/N are adequate. When opaque clouds are included in the simulations, the uncertainties in the retrieved mass increase, especially for high altitude clouds. However atmospheric parameters such as the temperature and trace-gas abundances are unaffected by the knowledge of the mass. Secondary atmospheres are more challenging due to the higher degree of freedom for the atmospheric main component, which is unknown. For broad wavelength range and adequate SNR, the mass can still be retrieved accurately and precisely if clouds are not present, and so are all the other atmospheric/planetary parameters. When clouds are added, we find that the mass uncertainties may impact substantially the retrieval of the mean molecular weight: an independent characterisation of the mass would therefore be helpful to capture/confirm the main atmospheric constituent.

This paper presents the atmospheric characterisation of three large, gaseous planets: WASP-127 b, WASP-79 b and WASP-62 b. We analysed spectroscopic data obtained with the G141 grism (1.088 - 1.68 $\mu$m) of the Wide Field Camera 3 (WFC3) onboard the Hubble Space Telescope (HST) using the Iraclis pipeline and the TauREx3 retrieval code, both of which are publicly available. For WASP-127 b, which is the least dense planet discovered so far and is located in the short-period Neptune desert, our retrieval results found strong water absorption corresponding to an abundance of log(H$_2$O) = -2.71$^{+0.78}_{-1.05}$, and absorption compatible with an iron hydride abundance of log(FeH)=$-5.25^{+0.88}_{-1.10}$, with an extended cloudy atmosphere. We also detected water vapour in the atmospheres of WASP-79 b and WASP-62 b, with best-fit models indicating the presence of iron hydride, too. We used the Atmospheric Detectability Index (ADI) as well as Bayesian log evidence to quantify the strength of the detection and compared our results to the hot Jupiter population study by Tsiaras et al. 2018. While all the planets studied here are suitable targets for characterisation with upcoming facilities such as the James Webb Space Telescope (JWST) and Ariel, WASP-127 b is of particular interest due to its low density, and a thorough atmospheric study would develop our understanding of planet formation and migration.

We analyse the transmission and emission spectra of the ultra-hot Jupiter WASP-76 b, observed with the G141 grism of the Hubble Space Telescope's Wide Field Camera 3 (WFC3). We reduce and fit the raw data for each observation using the open-source software Iraclis before performing a fully Bayesian retrieval using the publicly available analysis suite TauRex 3. Previous studies of the WFC3 transmission spectra of WASP-76 b found hints of titanium oxide (TiO) and vanadium oxide (VO) or non-grey clouds. Accounting for a fainter stellar companion to WASP-76, we reanalyse this data and show that removing the effects of this background star changes the slope of the spectrum, resulting in these visible absorbers no longer being detected, eliminating the need for a non-grey cloud model to adequately fit the data but maintaining the strong water feature previously seen. However, our analysis of the emission spectrum suggests the presence of TiO and an atmospheric thermal inversion, along with a significant amount of water. Given the brightness of the host star and the size of the atmospheric features, WASP-76 b is an excellent target for further characterisation with HST, or with future facilities, to better understand the nature of its atmosphere, to confirm the presence of TiO and to search for other optical absorbers.

We report follow-up observations of transiting exoplanets that have either large uncertainties (>10 minutes) in their transit times or have not been observed for over three years. A fully robotic ground-based telescope network, observations from citizen astronomers and data from TESS have been used to study eight planets, refining their ephemeris and orbital data. Such follow-up observations are key for ensuring accurate transit times for upcoming ground and space-based telescopes which may seek to characterise the atmospheres of these planets. We find deviations from the expected transit time for all planets, with transits occurring outside the 1 sigma uncertainties for seven planets. Using the newly acquired observations, we subsequently refine their periods and reduce the current predicted ephemeris uncertainties to 0.28 - 4.01 minutes. A significant portion of this work has been completed by students at two high schools in London as part of the Original Research By Young Twinkle Students (ORBYTS) programme.

With the upcoming launch of space telescopes dedicated to the study of exoplanets, the \textit{Atmospheric Remote-Sensing Infrared Exoplanet Large-survey} (ARIEL) and the \textit{James Webb Space Telescope} (JWST), a new era is opening in the exoplanetary atmospheric explorations. However, especially in relatively cold planets around later-type stars, photochemical hazes and clouds may mask the composition of the lower part of the atmosphere, making it difficult to detect any chemical species in the troposphere or to understand whether there is a surface or not. This issue is particularly exacerbated if the goal is to study the habitability of said exoplanets and to search for biosignatures.\par This work combines innovative laboratory experiments, chemical modeling and simulated observations at ARIEL and JWST resolutions. We focus on the signatures of molecular ions that can be found in upper atmospheres above cloud decks. Our results suggest that H$_3^+$ along with H$_3$O$^+$ could be detected in the observational spectra of sub-Neptunes based on realistic mixing ratio assumption. This new parametric set may help to distinguish super-Earths with a thin atmosphere from H$_2$-dominated sub-Neptunes, to address the critical question whether a low-gravity planet around a low-mass active star is able to retain its volatile components. These ions may also constitute potential tracers to certain molecules of interest such as H$_2$O or O$_2$ to probe the habitability of exoplanets. Their detection will be an enthralling challenge for the future JWST and ARIEL telescopes.

We present results from a set of simulations using a fully coupled three-dimensional (3D) chemistry-radiation-hydrodynamics model and investigate the effect of transport of chemical species by the large-scale atmospheric flow in hot Jupiter atmospheres. We couple a flexible chemical kinetics scheme to the Met Office Unified Model which enables the study of the interaction of chemistry, radiative transfer and fluid dynamics. We use a newly-released "reduced" chemical network comprising 30 chemical species that has been specifically developed for application in 3D atmosphere models. We simulate the atmospheres of the well-studied hot Jupiters HD~209458b and HD~189733b which both have dayside--nightside temperature contrasts of several hundred Kelvin and superrotating equatorial jets. We find qualitatively quite different chemical structures between the two planets, particularly for methane (CH$_4$), when advection of chemical species is included. Our results show that consideration of 3D chemical transport is vital in understanding the chemical composition of hot Jupiter atmospheres. 3D mixing leads to significant changes in the abundances of absorbing gas-phase species compared with what would be expected by assuming local chemical equilibrium, or from models including 1D - and even 2D - chemical mixing. We find that CH$_4$, carbon dioxide (CO$_2$) and ammonia (NH$_3$) are particularly interesting as 3D mixing of these species leads to prominent signatures of out-of-equilibrium chemistry in the transmission and emission spectra, detectable with near-future instruments.

Over the last several years, spectroscopic observations of transiting exoplanets have begun to uncover information about their atmospheres, including atmospheric composition and indications of the presence of clouds and hazes. Spectral retrieval is the leading technique for interpretation of transmission spectra and is employed by several teams using a variety of forward models and parameter estimation algorithms. However, different model suites have mostly been used in isolation and so it is unknown whether the results from each are comparable. As we approach the launch of the James Webb Space Telescope we anticipate advances in wavelength coverage, precision, and resolution of transit spectroscopic data, so it is important that the tools that will be used to interpret these information rich spectra are validated. To this end, we present an inter-model comparison of three retrieval suites: TauREx, NEMESIS and CHIMERA. We demonstrate that the forward model spectra are in good agreement (residual deviations on the order of 20 - 40 ppm), and discuss the results of cross retrievals between the three tools. Generally, the constraints from the cross retrievals are consistent with each other and with input values to within 1 sigma However, for high precision scenarios with error envelopes of order 30 ppm, subtle differences in the simulated spectra result in discrepancies between the different retrieval suites, and inaccuracies in retrieved values of several sigma. This can be considered analogous to substantial systematic/astrophysical noise in a real observation, or errors/omissions in a forward model such as molecular linelist incompleteness or missing absorbers.

Recent analysis of the planet K2-18b has shown the presence of water vapour in its atmosphere. While the H2O detection is significant, the Hubble Space Telescope (HST) WFC3 spectrum suggests three possible solutions of very different nature which can equally match the data. These solutions include a primary cloudy atmosphere with traces of water vapour and a secondary atmosphere with a substantial amount of H2O and/or an undetectable gas such as N2. Additionally, the atmospheric pressure and the possible presence of a liquid/solid surface cannot be investigated with currently available observations. In this paper we used the best fit parameters from Tsiaras et al. (2019) to build JWST and Ariel simulations of the three scenarios. We have investigated 18 retrieval cases, which encompass the three scenarios and different observational strategies with the two observatories. Retrieval results show that twenty combined transits should be enough for the Ariel mission to disentangle the three scenarios, while JWST would require only two transits if combining NIRISS and NIRSpec data. This makes K2-18b an ideal target for atmospheric follow-ups by both facilities and highlights the capabilities of the next generation of space-based infrared observatories to provide a complete picture of low gravity planets.

In this work, we present Alfnoor, a dedicated tool optimised for population studies of exoplanet atmospheres. Alfnoor combines the latest version of the retrieval algorithm TauREx 3, with the instrument noise simulator ArielRad and enables the simultaneous retrieval analysis of a large sample of exo-atmospheres. We applied this tool to the Ariel list of planetary candidates and focus on hydrogen dominated, cloudy atmospheres observed in transit with the Tier-2 mode (medium Ariel resolution). As a first experiment, we randomised the abundances - ranging from 10$^{-7}$ to 10$^{-2}$ - of the trace gases, which include H$_2$O, CH$_4$, CO, CO$_2$ and NH$_3$. This exercise allowed to estimate the detection limits for Ariel Tier-2 and Tier-3 modes when clouds are present. In a second experiment, we imposed an arbitrary trend between a chemical species and the effective temperature of the planet. A last experiment was run requiring molecular abundances being dictated by equilibrium chemistry at a certain temperature. Our results demonstrate the ability of Ariel Tier-2 and Tier-3 surveys to reveal trends between the chemistry and associated planetary parameters. Future work will focus on eclipse data, on atmospheres heavier than hydrogen and will be applied also to other observatories.

Further advances in exoplanet detection and characterisation require sampling a diverse population of extrasolar planets. One technique to detect these distant worlds is through the direct detection of their thermal emission. The so-called direct imaging technique, is suitable for observing young planets far from their star. These are very low signal-to-noise-ratio (SNR) measurements and limited ground truth hinders the use of supervised learning approaches. In this paper, we combine deep generative and discriminative models to bypass the issues arising when directly training on real data. We use a Generative Adversarial Network to obtain a suitable dataset for training Convolutional Neural Network classifiers to detect and locate planets across a wide range of SNRs. Tested on artificial data, our detectors exhibit good predictive performance and robustness across SNRs. To demonstrate the limits of the detectors, we provide maps of the precision and recall of the model per pixel of the input image. On real data, the models can re-confirm bright source detections.

The James Webb Space Telescope (JWST) is expected to revolutionize the field of exoplanets. The broad wavelength coverage and the high sensitivity of its instruments will allow characterization of exoplanetary atmospheres with unprecedented precision. Following the Call for the Cycle 1 Early Release Science Program, the Transiting Exoplanet Community was awarded time to observe several targets, including WASP-43b. The atmosphere of this hot Jupiter has been intensively observed but still harbors some mysteries, especially concerning the day-night temperature gradient, the efficiency of the atmospheric circulation, and the presence of nightside clouds. We will constrain these properties by observing a full orbit of the planet and extracting its spectroscopic phase curve in the 5--12 $\mu$m range with JWST/MIRI. To prepare for these observations, we performed an extensive modeling work with various codes: radiative transfer, chemical kinetics, cloud microphysics, global circulation models, JWST simulators, and spectral retrieval. Our JWST simulations show that we should achieve a precision of 210 ppm per 0.1 $\mu$m spectral bin on average, which will allow us to measure the variations of the spectrum in longitude and measure the night-side emission spectrum for the first time. If the atmosphere of WASP-43b is clear, our observations will permit us to determine if its atmosphere has an equilibrium or disequilibrium chemical composition, providing eventually the first conclusive evidence of chemical quenching in a hot Jupiter atmosphere. If the atmosphere is cloudy, a careful retrieval analysis will allow us to identify the cloud composition.

TauREx 3 is the next generation of the TauREx exoplanet atmospheric retrieval framework for Windows, Mac and Linux. It is a complete rewrite with a full Python stack that makes it simple to use, high performance and dynamic/flexible. The new main taurex program is extremely modular, allowing the user to augment taurex functionalities with their own code and easily perform retrievals on their own parameters. This is achieved by dynamic determination of fitting parameters where TauREx 3 can detect new parameters for retrieval from the user code though a simple interface. TauREx 3 can act as a library with a simple 'import taurex' providing a rich set of classes and functions related to atmospheric modelling. A 10x speed-up in forward model computations is achieved compared to the previous version with a six-fold reduction in retrieval times whilst maintaining robust results. TauREx 3 intends to act as a standalone, all in one package for retrievals whilst the TauREx 3 python library can be used by the user to easily build or augment their own data pipelines.

State of the art spectral retrieval models of exoplanet atmospheres assume constant chemical profiles with altitude. This assumption is justified by the information content of current datasets which do not allow, in most cases, for the molecular abundances as a function of pressure to be constrained. In the context of the next generation of telescopes, a more accurate description of chemical profiles may become crucial to interpret observations and gain new insights into atmospheric physics. We explore here the possibility of retrieving pressure-dependent chemical profiles from transit spectra, without injecting any priors from theoretical chemical models in our retrievals. The "2-layer" parameterisation presented here allows for the independent extraction of molecular abundances above and below a certain atmospheric pressure. By simulating various cases, we demonstrate that this evolution from constant chemical abundances is justified by the information content of spectra provided by future space instruments. Comparisons with traditional retrieval models show that assumptions made on chemical profiles may significantly impact retrieved parameters, such as the atmospheric temperature, and justify the attention we give here to this issue. We find that the 2-layer retrieval accurately captures discontinuities in the vertical chemical profiles, which could be caused by disequilibrium processes -- such as photo-chemistry -- or the presence of clouds/hazes. The 2-layer retrieval could also help to constrain the composition of clouds and hazes by exploring the correlation between the chemical changes in the gaseous phase and the pressure at which the condensed phase occurs. The 2-layer retrieval presented here therefore represents an important step forward in our ability to constrain theoretical chemical models and cloud/haze composition from the analysis of future observations.