Normalized to: Cavallini, F.
[1]
oai:arXiv.org:1905.01393 [pdf] - 1898051
New technique to measure the cavity defects of Fabry-Perot
interferometers
Submitted: 2019-05-03
(Abridged):
We define and test a new technique to accurately measure the cavity defects
of air-spaced FPIs, including distortions due to the spectral tuning process
typical of astronomical observations. We further develop a correction technique
to maintain the shape of the cavity as constant as possible during the spectral
scan. These are necessary steps to optimize the spectral transmission profile
of a two-dimensional spectrograph using one or more FPIs.
We devise a generalization of the techniques developed for the so-called
phase-shifting interferometry to the case of FPIs. The technique is applicable
to any FPI that can be tuned via changing the cavity spacing ($z$-axis), and
can be used for any etalon regardless of the coating' reflectivity. The major
strength of our method is the ability to fully characterize the cavity during a
spectral scan, allowing for the determination of scan-dependent modifications
of the plates. As a test, we have applied this technique to three 50 mm
diameter interferometers, with cavity gaps ranging between 600 micron and 3 mm,
coated for use in the visible range.
We obtain accurate and reliable measures of the cavity defects of air-spaced
FPIs, and of their evolution during the entire spectral scan. Our main, and
unexpected, result is that the relative tilt between the two FPI plates varies
significantly during the spectral scan, and can dominate the cavity defects; in
particular, we observe that the tilt component at the extremes of the scan is
sensibly larger than at the center of the scan. Exploiting the capability of
the electronic controllers to set the reference plane at any given spectral
step, we develop a correction technique that allows the minimization of the
tilt during a complete spectral scan. The correction remains highly stable over
long periods, well beyond the typical duration of astronomical observations.
[2]
oai:arXiv.org:0709.2417 [pdf] - 4994
The solar chromosphere at high resolution with IBIS. I. New insights
from the Ca II 854.2 nm line
Cauzzi, G.;
Reardon, K. P.;
Uitenbroek, H.;
Cavallini, F.;
Falchi, A.;
Falciani, R.;
Janssen, K.;
Rimmele, T.;
Vecchio, A.;
Woeger, F.
Submitted: 2007-09-15, last modified: 2008-01-03
(Abridged)
Aims: In this paper, we seek to establish the suitability of imaging
spectroscopy performed in the Ca II 854.2 nm line as a means to investigate the
solar chromosphere at high resolution.
Methods: We utilize monochromatic images obtained with the Interferometric
BIdimensional Spectrometer (IBIS) at multiple wavelengths within the Ca II
854.2 nm line and over several quiet areas. We analyze both the morphological
properties derived from narrow-band monochromatic images and the average
spectral properties of distinct solar features such as network points,
internetwork areas and fibrils.
Results: The spectral properties derived over quiet-Sun targets are in full
agreement with earlier results obtained with fixed-slit spectrographic
observations, highlighting the reliability of the spectral information obtained
with IBIS. Furthermore, the very narrowband IBIS imaging reveals with much
clarity the dual nature of the Ca II 854.2 nm line: its outer wings gradually
sample the solar photosphere, while the core is a purely chromospheric
indicator. The latter displays a wealth of fine structures including bright
points, akin to the Ca II H2V and K2V grains, as well as fibrils originating
from even the smallest magnetic elements. The fibrils occupy a large fraction
of the observed field of view even in the quiet regions, and clearly outline
atmospheric volumes with different dynamical properties, strongly dependent on
the local magnetic topology. This highlights the fact that 1-D models
stratified along the vertical direction can provide only a very limited
representation of the actual chromospheric physics.