We infer the number of planets-per-star as a function of orbital period and planet size using $Kepler$ archival data products with updated stellar properties from the $Gaia$ Data Release 2. Using hierarchical Bayesian modeling and Hamiltonian Monte Carlo, we incorporate planet radius uncertainties into an inhomogeneous Poisson point process model. We demonstrate that this model captures the general features of the outcome of the planet formation process around GK stars, and provides an infrastructure to use the $Kepler$ results to constrain analytic planet distribution models. We report an increased mean and variance in the marginal posterior distributions for the number of planets per $GK$ star when including planet radius measurement uncertainties. We estimate the number of planets-per-$GK$ star between 0.75 and 2.5 $R_{\oplus}$ and 50 to 300 day orbital periods to have a $68\%$ credible interval of $0.49$ to $0.77$ and a posterior mean of $0.63$. This posterior has a smaller mean and a larger variance than the occurrence rate calculated in this work and in Burke et al. (2015) for the same parameter space using the $Q1-Q16$ (previous $Kepler$ planet candidate and stellar catalog), and a larger mean and variance than when using the $DR25$ (latest $Kepler$ planet candidate and stellar catalog). We find that the accuracy and precision of our hierarchical Bayesian model posterior distributions are less sensitive to the total number of planets in the sample, and more so on the characteristics of the catalog completeness and reliability and the span of the planet parameter space.

The Kepler Mission was designed to identify and characterize transiting planets in the Kepler Field of View and to determine their occurrence rates. Emphasis was placed on identification of Earth-size planets orbiting in the Habitable Zone of their host stars. Science data were acquired for a period of four years. Long-cadence data with 29.4 min sampling were obtained for ~200,000 individual stellar targets in at least one observing quarter in the primary Kepler Mission. Light curves for target stars are extracted in the Kepler Science Data Processing Pipeline, and are searched for transiting planet signatures. A Threshold Crossing Event is generated in the transit search for targets where the transit detection threshold is exceeded and transit consistency checks are satisfied. These targets are subjected to further scrutiny in the Data Validation (DV) component of the Pipeline. Transiting planet candidates are characterized in DV, and light curves are searched for additional planets after transit signatures are modeled and removed. A suite of diagnostic tests is performed on all candidates to aid in discrimination between genuine transiting planets and instrumental or astrophysical false positives. Data products are generated per target and planet candidate to document and display transiting planet model fit and diagnostic test results. These products are exported to the Exoplanet Archive at the NASA Exoplanet Science Institute, and are available to the community. We describe the DV architecture and diagnostic tests, and provide a brief overview of the data products. Transiting planet modeling and the search for multiple planets on individual targets are described in a companion paper. The final revision of the Kepler Pipeline code base is available to the general public through GitHub. The Kepler Pipeline has also been modified to support the TESS Mission which will commence in 2018.

We present the Kepler Object of Interest (KOI) catalog of transiting exoplanets based on searching four years of Kepler time series photometry (Data Release 25, Q1-Q17). The catalog contains 8054 KOIs of which 4034 are planet candidates with periods between 0.25 and 632 days. Of these candidates, 219 are new and include two in multi-planet systems (KOI-82.06 and KOI-2926.05), and ten high-reliability, terrestrial-size, habitable zone candidates. This catalog was created using a tool called the Robovetter which automatically vets the DR25 Threshold Crossing Events (TCEs, Twicken et al. 2016). The Robovetter also vetted simulated data sets and measured how well it was able to separate TCEs caused by noise from those caused by low signal-to-noise transits. We discusses the Robovetter and the metrics it uses to sort TCEs. For orbital periods less than 100 days the Robovetter completeness (the fraction of simulated transits that are determined to be planet candidates) across all observed stars is greater than 85%. For the same period range, the catalog reliability (the fraction of candidates that are not due to instrumental or stellar noise) is greater than 98%. However, for low signal-to-noise candidates between 200 and 500 days around FGK dwarf stars, the Robovetter is 76.7% complete and the catalog is 50.5% reliable. The KOI catalog, the transit fits and all of the simulated data used to characterize this catalog are available at the NASA Exoplanet Archive.

We present results of the final Kepler Data Processing Pipeline search for transiting planet signals in the full 17-quarter primary mission data set. The search includes a total of 198,709 stellar targets, of which 112,046 were observed in all 17 quarters and 86,663 in fewer than 17 quarters. We report on 17,230 targets for which at least one transit signature is identified that meets the specified detection criteria: periodicity, minimum of three observed transit events, detection statistic (i.e., signal-to-noise ratio) in excess of the search threshold, and passing grade on three statistical transit consistency tests. Light curves for which a transit signal is identified are iteratively searched for additional signatures after a limb-darkened transiting planet model is fitted to the data and transit events are removed. The search for additional planets adds 16,802 transit signals for a total of 34,032; this far exceeds the number of transit signatures identified in prior pipeline runs. There was a strategic emphasis on completeness over reliability for the final Kepler transit search. A comparison of the transit signals against a set of 3402 well-established, high-quality Kepler Objects of Interest yields a recovery rate of 99.8%. The high recovery rate must be weighed against a large number of false-alarm detections. We examine characteristics of the planet population implied by the transiting planet model fits with an emphasis on detections that would represent small planets orbiting in the habitable zone of their host stars.

With each new version of the Kepler pipeline and resulting planet candidate catalogue, an updated measurement of the underlying planet population can only be recovered with an corresponding measurement of the Kepler pipeline detection efficiency. Here, we present measurements of the sensitivity of the pipeline (version 9.2) used to generate the Q1-Q17 DR24 planet candidate catalog (Coughlin et al. 2016). We measure this by injecting simulated transiting planets into the pixel-level data of 159,013 targets across the entire Kepler focal plane, and examining the recovery rate. Unlike previous versions of the Kepler pipeline, we find a strong period dependence in the measured detection efficiency, with longer (>40 day) periods having a significantly lower detectability than shorter periods, introduced in part by an incorrectly implemented veto. Consequently, the sensitivity of the 9.2 pipeline cannot be cast as a simple one-dimensional function of the signal strength of the candidate planet signal as was possible for previous versions of the pipeline. We report on the implications for occurrence rate calculations based on the Q1-Q17 DR24 planet candidate catalog and offer important caveats and recommendations for performing such calculations. As before, we make available the entire table of injected planet parameters and whether they were recovered by the pipeline, enabling readers to derive the pipeline detection sensitivity in the planet and/or stellar parameter space of their choice.

We present the results of two 2.3 micron near-infrared radial velocity surveys to detect exoplanets around 36 nearby and young M dwarfs. We use the CSHELL spectrograph (R ~46,000) at the NASA InfraRed Telescope Facility, combined with an isotopic methane absorption gas cell for common optical path relative wavelength calibration. We have developed a sophisticated RV forward modeling code that accounts for fringing and other instrumental artifacts present in the spectra. With a spectral grasp of only 5 nm, we are able to reach long-term radial velocity dispersions of ~20-30 m/s on our survey targets.

We present the results of a precise near-infrared (NIR) radial velocity (RV) survey of 32 low-mass stars with spectral types K2-M4 using CSHELL at the NASA IRTF in the $K$-band with an isotopologue methane gas cell to achieve wavelength calibration and a novel iterative RV extraction method. We surveyed 14 members of young ($\approx$ 25-150 Myr) moving groups, the young field star $\varepsilon$ Eridani as well as 18 nearby ($<$ 25 pc) low-mass stars and achieved typical single-measurement precisions of 8-15 m s$^{-1}$ with a long-term stability of 15-50 m s$^{-1}$. We obtain the best NIR RV constraints to date on 27 targets in our sample, 19 of which were never followed by high-precision RV surveys. Our results indicate that very active stars can display long-term RV variations as low as $\sim$ 25-50 m s$^{-1}$ at $\approx$ 2.3125 $\mu$m, thus constraining the effect of jitter at these wavelengths. We provide the first multi-wavelength confirmation of GJ 876 bc and independently retrieve orbital parameters consistent with previous studies. We recovered RV variability for HD 160934 AB and GJ 725 AB that are consistent with their known binary orbits, and nine other targets are candidate RV variables with a statistical significance of 3-5$\sigma$. Our method combined with the new iSHELL spectrograph will yield long-term RV precisions of $\lesssim$ 5 m s$^{-1}$ in the NIR, which will allow the detection of Super-Earths near the habitable zone of mid-M dwarfs.

Given that low-mass stars have intrinsically low luminosities at optical wavelengths and a propensity for stellar activity, it is advantageous for radial velocity (RV) surveys of these objects to use near-infrared (NIR) wavelengths. In this work we describe and test a novel RV extraction pipeline dedicated to retrieving RVs from low mass stars using NIR spectra taken by the CSHELL spectrograph at the NASA Infrared Telescope Facility, where a methane isotopologue gas cell is used for wavelength calibration. The pipeline minimizes the residuals between the observations and a spectral model composed of templates for the target star, the gas cell, and atmospheric telluric absorption; models of the line spread function, continuum curvature, and sinusoidal fringing; and a parameterization of the wavelength solution. The stellar template is derived iteratively from the science observations themselves without a need for separate observations dedicated to retrieving it. Despite limitations from CSHELL's narrow wavelength range and instrumental systematics, we are able to (1) obtain an RV precision of 35 m/s for the RV standard star GJ 15 A over a time baseline of 817 days, reaching the photon noise limit for our attained SNR, (2) achieve ~3 m/s RV precision for the M giant SV Peg over a baseline of several days and confirm its long-term RV trend due to stellar pulsations, as well as obtain nightly noise floors of ~2 - 6 m/s, and (3) show that our data are consistent with the known masses, periods, and orbital eccentricities of the two most massive planets orbiting GJ 876. Future applications of our pipeline to RV surveys using the next generation of NIR spectrographs, such as iSHELL, will enable the potential detection of Super-Earths and Mini-Neptunes in the habitable zones of M dwarfs.

We present the seventh Kepler planet candidate catalog, which is the first to be based on the entire, uniformly processed, 48 month Kepler dataset. This is the first fully automated catalog, employing robotic vetting procedures to uniformly evaluate every periodic signal detected by the Q1-Q17 Data Release 24 (DR24) Kepler pipeline. While we prioritize uniform vetting over the absolute correctness of individual objects, we find that our robotic vetting is overall comparable to, and in most cases is superior to, the human vetting procedures employed by past catalogs. This catalog is the first to utilize artificial transit injection to evaluate the performance of our vetting procedures and quantify potential biases, which are essential for accurate computation of planetary occurrence rates. With respect to the cumulative Kepler Object of Interest (KOI) catalog, we designate 1,478 new KOIs, of which 402 are dispositioned as planet candidates (PCs). Also, 237 KOIs dispositioned as false positives (FPs) in previous Kepler catalogs have their disposition changed to PC and 118 PCs have their disposition changed to FP. This brings the total number of known KOIs to 8,826 and PCs to 4,696. We compare the Q1-Q17 DR24 KOI catalog to previous KOI catalogs, as well as ancillary Kepler catalogs, finding good agreement between them. We highlight new PCs that are both potentially rocky and potentially in the habitable zone of their host stars, many of which orbit solar-type stars. This work represents significant progress in accurately determining the fraction of Earth-size planets in the habitable zone of Sun-like stars. The full catalog is publicly available at the NASA Exoplanet Archive.

We report on the discovery and validation of Kepler-452b, a transiting planet identified by a search through the 4 years of data collected by NASA's Kepler Mission. This possibly rocky 1.63$^{+0.23}_{-0.20}$ R$_\oplus$ planet orbits its G2 host star every 384.843$^{+0.007}_{0.012}$ days, the longest orbital period for a small (R$_p$ < 2 R$_\oplus$) transiting exoplanet to date. The likelihood that this planet has a rocky composition lies between 49% and 62%. The star has an effective temperature of 5757$\pm$85 K and a log g of 4.32$\pm$0.09. At a mean orbital separation of 1.046$^{+0.019}_{-0.015}$ AU, this small planet is well within the optimistic habitable zone of its star (recent Venus/early Mars), experiencing only 10% more flux than Earth receives from the Sun today, and slightly outside the conservative habitable zone (runaway greenhouse/maximum greenhouse). The star is slightly larger and older than the Sun, with a present radius of 1.11$^{+0.15}_{-0.09}$ R$_\odot$ and an estimated age of 6 Gyr. Thus, Kepler-452b has likely always been in the habitable zone and should remain there for another 3 Gyr.

We measure planet occurrence rates using the planet candidates discovered by the Q1-Q16 Kepler pipeline search. This study examines planet occurrence rates for the Kepler GK dwarf target sample for planet radii, 0.75<Rp<2.5 Rearth, and orbital periods, 50<Porb<300 days, with an emphasis on a thorough exploration and identification of the most important sources of systematic uncertainties. Integrating over this parameter space, we measure an occurrence rate of F=0.77 planets per star, with an allowed range of 0.3<F<1.9. The allowed range takes into account both statistical and systematic uncertainties, and values of F beyond the allowed range are significantly in disagreement with our analysis. We generally find higher planet occurrence rates and a steeper increase in planet occurrence rates towards small planets than previous studies of the Kepler GK dwarf sample. Through extrapolation, we find that the one year orbital period terrestrial planet occurrence rate, zeta_1=0.1, with an allowed range of 0.01<zeta_1<2, where zeta_1 is defined as the number of planets per star within 20% of the Rp and Porb of Earth. For G dwarf hosts, the zeta_1 parameter space is a subset of the larger eta_earth parameter space, thus zeta_1 places a lower limit on eta_earth for G dwarf hosts. From our analysis, we identify the leading sources of systematics impacting Kepler occurrence rate determinations as: reliability of the planet candidate sample, planet radii, pipeline completeness, and stellar parameters.

In the first three years of operation the Kepler mission found 3,697 planet candidates from a set of 18,406 transit-like features detected on over 200,000 distinct stars. Vetting candidate signals manually by inspecting light curves and other diagnostic information is a labor intensive effort. Additionally, this classification methodology does not yield any information about the quality of planet candidates; all candidates are as credible as any other candidate. The torrent of exoplanet discoveries will continue after Kepler as there will be a number of exoplanet surveys that have an even broader search area. This paper presents the application of machine-learning techniques to the classification of exoplanet transit-like signals present in the \Kepler light curve data. Transit-like detections are transformed into a uniform set of real-numbered attributes, the most important of which are described in this paper. Each of the known transit-like detections is assigned a class of planet candidate; astrophysical false positive; or systematic, instrumental noise. We use a random forest algorithm to learn the mapping from attributes to classes on this training set. The random forest algorithm has been used previously to classify variable stars; this is the first time it has been used for exoplanet classification. We are able to achieve an overall error rate of 5.85% and an error rate for classifying exoplanets candidates of 2.81%.

We present the results of a search for potential transit signals in the full 17-quarter data set collected during Kepler's primary mission that ended on May 11, 2013, due to the on-board failure of a second reaction wheel needed to maintain high precision, fixed, pointing. The search includes a total of 198,646 targets, of which 112,001 were observed in every quarter and 86,645 were observed in a subset of the 17 quarters. We find a total of 12,669 targets that contain at least one signal that meets our detection criteria: periodicity of the signal, a minimum of three transit events, an acceptable signal-to-noise ratio, and four consistency tests that suppress false positives. Each target containing at least one transit-like pulse sequence is searched repeatedly for other signals that meet the detection criteria, indicating a multiple planet system. This multiple planet search adds an additional 7,698 transit-like signatures for a total of 20,367. Comparison of this set of detected signals with a set of known and vetted transiting planet signatures in the Kepler field of view shows that the recovery rate of the search is 90.3%. We review ensemble properties of the detected signals and present various metrics useful in validating these potential planetary signals. We highlight previously undetected planetary candidates, including several small potential planets in the habitable zone of their host stars.

\We present the sixth catalog of Kepler candidate planets based on nearly 4 years of high precision photometry. This catalog builds on the legacy of previous catalogs released by the Kepler project and includes 1493 new Kepler Objects of Interest (KOIs) of which 554 are planet candidates, and 131 of these candidates have best fit radii <1.5 R_earth. This brings the total number of KOIs and planet candidates to 7305 and 4173 respectively. We suspect that many of these new candidates at the low signal-to-noise limit may be false alarms created by instrumental noise, and discuss our efforts to identify such objects. We re-evaluate all previously published KOIs with orbital periods of >50 days to provide a consistently vetted sample that can be used to improve planet occurrence rate calculations. We discuss the performance of our planet detection algorithms, and the consistency of our vetting products. The full catalog is publicly available at the NASA Exoplanet Archive.

The Kepler mission discovered 2842 exoplanet candidates with 2 years of data. We provide updates to the Kepler planet candidate sample based upon 3 years (Q1-Q12) of data. Through a series of tests to exclude false-positives, primarily caused by eclipsing binary stars and instrumental systematics, 855 additional planetary candidates have been discovered, bringing the total number known to 3697. We provide revised transit parameters and accompanying posterior distributions based on a Markov Chain Monte Carlo algorithm for the cumulative catalogue of Kepler Objects of Interest. There are now 130 candidates in the cumulative catalogue that receive less than twice the flux the Earth receives and more than 1100 have a radius less than 1.5 Rearth. There are now a dozen candidates meeting both criteria, roughly doubling the number of candidate Earth analogs. A majority of planetary candidates have a high probability of being bonafide planets, however, there are populations of likely false-positives. We discuss and suggest additional cuts that can be easily applied to the catalogue to produce a set of planetary candidates with good fidelity. The full catalogue is publicly available at the NASA Exoplanet Archive.

Kepler is a space telescope that searches Sun-like stars for planets. Its major goal is to determine {\eta}_Earth, the fraction of Sunlike stars that have planets like Earth. When a planet 'transits' or moves in front of a star, Kepler can measure the concomitant dimming of the starlight. From analysis of the first four months of those measurements for over 150,000 stars, Kepler's science team has determined sizes, surface temperatures, orbit sizes and periods for over a thousand new planet candidates. In this paper, we characterize the period probability distribution function of the super-Earth and Neptune planet candidates with periods up to 132 days, and find three distinct period regimes. For candidates with periods below 3 days the density increases sharply with increasing period; for periods between 3 and 30 days the density rises more gradually with increasing period, and for periods longer than 30 days, the density drops gradually with increasing period. We estimate that 1% to 3% of stars like the Sun are expected to have Earth analog planets, based on the Kepler data release of Feb 2011. This estimate of is based on extrapolation from a fiducial subsample of the Kepler planet candidates that we chose to be nominally 'complete' (i.e., no missed detections) to the realm of the Earth-like planets, by means of simple power law models. The accuracy of the extrapolation will improve as more data from the Kepler mission is folded in. Accurate knowledge of {\eta}_Earth is essential for the planning of future missions that will image and take spectra of Earthlike planets. Our result that Earths are relatively scarce means that a substantial effort will be needed to identify suitable target stars prior to these future missions.

We examine the scientific viability of an imaging mission to find exo-Earths combining the James Webb Space Telescope (JWST) with a starshade external occulter under a realistic set of astrophysical assumptions. We define an exo-Earth as a planet of 1 to 10 Earth masses orbiting in the habitable zone (HZ) of a solar-type star. We show that for a survey strategy that relies on a single image to detect an exo-Earth, roughly half of all exo-Earth detections will be false alarms. Here, a false alarm is a mistaken identification of a planet as an exo-Earth. We consider two survey strategies designed to mitigate the false alarm problem. The first is to require that for each potential exo-Earth, a sufficient number of detections are made to measure the orbit. When the orbit is known we can determine if the planet is in the habitable zone. With this strategy, we find that the number of exo-Earths found is on average 0.9, 1.9 and 2.7 for {\eta}_Earth = 0.1, 0.2 and 0.3. Here, {\eta}_Earth is the frequency of exo-Earths orbiting solar-type stars. There is a ~40% probability of finding zero exo-Earths for {\eta}_Earth = 0.1. A second strategy can be employed if a space astrometry mission has identified and measured the orbits and masses of the planets orbiting nearby stars. We find that with prior space-based astrometry from a survey of 60 nearby stars, JWST plus an external occulter can obtain orbital solutions for the majority (70% to 80%) of the exo-Earths orbiting these 60 stars. The exo-Earth yield is approximately five times higher than the yield for the JWST plus occulter mission without prior astrometry. With prior astrometry, the probability that an imaging mission will find zero exo-Earths is reduced to below 1% for the case of {\eta}_Earth = 0.1.

If an orbit is fitted from combined RV and astrometric data, the orbit should be physically consistent with both data sets. The Keplerian orbit of a planet is a highly nonlinear function of seven parameters. The astrometric orbit problem can be partially linearized via transformation to four linear parameters (related four Thiele-Innes constants) plus three nonlinear parameters: eccentricity, period and periastron time. The RV orbit problem can be partially linearized via transformation to two additional linear parameters plus the same three nonlinear parameters. Unfortunately, the two linear parameters from RV are not linearly related to the four linear parameters from astrometry. Because of this difficulty, currently available algorithms for fitting combined RV and astrometric data to multiple-planet systems employ at least five nonlinear parameters per planet. We have developed a new algorithm for fitting orbits of multiple planet systems from combined data sets of radial velocity and astrometric measurements. The new algorithm satisfies the RV-astrometry consistency requirement, while using three nonlinear parameters per planet. We expect the reduction in nonlinearity to give the algorithm a significant advantage in computation speed over existing algorithms. In this work, we describe the algorithm, which has been validated in the context of a recent double-blind planet detection simulation study.

The holy grail of exoplanet searches is an exo-Earth, an Earth mass planet in the habitable zone around a nearby star. Mass is the most important parameter of a planet and can only be measured by observing the motion of the star around the planet-star center of mass. A single image of a planet, however, does not provide evidence that the planet is Earth mass or that it is in a habitable zone orbit. The planet's orbit, however, can be measured either by imaging the planet at multiple epochs or by measuring the position of the star at multiple epochs by space-based astrometry. The measurement of an exo-planet's orbit by direct imaging is complicated by a number of factors: (1) the inner working angle (IWA); (2) the apparent brightness of the planet depending on the orbital phase; (3) confusion arising from the presence of multiple planets; and (4) the planet-star contrast. In this paper we address the question: "Can a prior astrometric mission that can identify which stars have Earthlike planets significantly improve the science yield of a mission to image exo-Earths?" We find that the Occulting Ozone Observatory (a small external occulter mission that cannot measure spectra) could confirm the orbits of ~4 to ~5 times as many exo-Earths if an astrometric mission preceded it to identify which stars had such planets. We find that in the case of an internal coronagraph, a survey of the nearest ~60 stars could be done with a telescope of half the size if an astrometric mission had first identified the presence of Earth-like planets in the habitable zone and measured their orbital parameters.

The SIM Lite mission will undertake several planet surveys. One of them, the Deep Planet Survey, is designed to detect Earth-mass exoplanets in the habitable zones of nearby main sequence stars. A double blind study has been conducted to assess the capability of SIM to detect such small planets in a multi-planet system where several giant planets might be present. One of the tools which helped in deciding if the detected planets were actual was an orbit integrator using the publicly available HNBody code so that the orbit solutions could be analyzed in terms of temporal stability over many orbits. In this contribution, we describe the implementation of this integrator and analyze the different blind test solutions. We discuss also the usefulness of this method given that some planets might be not detected but still affect the overall stability of the system.

Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.

Analytical relations are derived for the amplitude of astrometric, photometric and radial velocity perturbations caused by a single rotating spot. The relative power of the star spot jitter is estimated and compared with the available data for $\kappa^1$ Ceti and HD 166435, as well as with numerical simulations for $\kappa^1$ Ceti and the Sun. A Sun-like star inclined at $i=90\degr$ at 10 pc is predicted to have a RMS jitter of 0.087 \uas in its astrometric position along the equator, and 0.38 m s$^{-1}$ in radial velocities. If the presence of spots due to stellar activity is the ultimate limiting factor for planet detection, the sensitivity of SIM Lite to Earth-like planets in habitable zones is about an order of magnitude higher that the sensitivity of prospective ultra-precise radial velocity observations of nearby stars.

Astrometry can detect rocky planets in a broad range of masses and orbital distances and measure their masses and three-dimensional orbital parameters, including eccentricity and inclination, to provide the properties of terrestrial planets. The masses of both the new planets and the known gas giants can be measured unambiguously, allowing a direct calculation of the gravitational interactions, both past and future. Such dynamical interactions inform theories of the formation and evolution of planetary systems, including Earth-like planets. Astrometry is the only technique technologically ready to detect planets of Earth mass in the habitable zone (HZ) around solar-type stars within 20 pc. These Earth analogs are close enough for follow-up observations to characterize the planets by infrared imaging and spectroscopy with planned future missions such as the James Webb Space Telescope (JWST) and the Terrestrial Planet Finder/Darwin. Employing a demonstrated astrometric precision of 1 microarcsecond and a noise floor under 0.1 micro-arcseconds, SIM Lite can make multiple astrometric measurements of the nearest 60 F-, G-, and K-type stars during a five-year mission. SIM Lite directly tests theories of rocky planet formation and evolution around Sun-like stars and identifies the nearest potentially habitable planets for later spaceborne imaging, e.g., with Terrestrial Planet Finder and Darwin. SIM was endorsed by the two recent Decadal Surveys and it meets the highest-priority goal of the 2008 AAAC Exoplanet Task Force.

We ask if Earth-like planets (terrestrial mass and habitable-zone orbit) can be detected in multi-planet systems, using astrometric and radial velocity observations. We report here the preliminary results of double-blind calculations designed to answer this question.

The evidence is mounting that star formation necessarily involves planet formation. We clearly have a vested interest in finding other Earths but a true understanding of planet formation requires completing the census and mapping planetary architecture in all its grandeur and diversity. Here, we show that a 2000-star survey undertaken with SIM Lite will uniquely probe planets around B-A-F stars, bright and binary stars and white dwarfs. In addition, we show that the high precision of SIM Lite allows us to gain unique insights into planet formation via accurate measurements of mutual inclinations.

We report VRI CCD observations of nine Cepheids in the South Polar (Sculptor) Group spiral galaxy NGC 0247. Periods of these Cepheids range from 20 to 70 days. Over the past 20 years the very brightest Cepheid in our sample, NGC 0247:[MF09] C1, has decreased its period by 6%, faded by 0.8 mag in the V band, and become bluer by 0.23 mag in (V-I). A multi-wavelength analysis of the Cepheid data yields a true distance modulus of mod = 27.81 +/- 0.10 mag (3.36 +/- 0.16 Mpc) with a total line-of-sight reddening of E(V-I) = 0.07 +/-0.04 mag, after adopting an LMC true distance modulus of 18.5 mag and reddening of E(B-V) = 0.10 mag. These results are in excellent agreement with other very recently published (Cepheid and TRGB) distances to NGC 0247. Combining both Cepheid datasets gives mod_o = 27.85 +/-0.09 mag (3.72 +/- 0.15 Mpc) with E(V-I) = 0.11 +/- 0.03 mag.

Space astrometry is capable of sub-microarcsecond measurements of star positions. A hundred visits over several years could yield relative astrometric precision of ~0.1 uas, below the astrometric signature (0.3 uas) of a Sun-Earth system at a distance of 10 parsecs. We investigate the impact of starspots on the detectability, via astrometric and radial velocity techniques, of Earthlike planets orbiting Sunlike stars. We find that for nearby stars, although starspot noise imposes severe restrictions on detectability by the radial velocity technique, it does not significantly affect astrometric detectability of habitable zone planets down to below an Earth mass.

The Space Interferometry Mission PlanetQuest Light (or SIM-Lite) is a new concept for a space borne astrometric instrument, to be located in a solar Earth-trailing orbit. SIM-Lite utilizes technology developed over the past ten years for the SIM mission. The instrument consists of two Michelson stellar interferometers and a precision telescope. The first interferometer chops between the target star and a set of Reference stars. The second interferometer monitors the attitude of the instrument in the direction of the target star. The telescope monitors the attitude of the instrument in the other two directions. SIM-Lite will be capable of one micro-arc-second narrow angle astrometry on magnitude 6 or brighter stars, relative to magnitude 9 Reference stars in a two degree field. During the 5 year mission, SIM-Lite would search 65 nearby stars for planets of masses down to one Earth mass, in the Habitable Zone, which have orbit periods of less than 3 years. SIM-Lite will also perform global astrometry on a variety of astrophysics objects, reaching 4.5 micro-arc-seconds absolute position and parallax measurements. As a pointed instrument, SIM-Lite will be capable of achieving 8 micro-arc-second astrometric accuracy on 19th visual magnitude objects and 15 micro-arc-second astrometric accuracy on 20th visual magnitude objects after 100 hours of integration. This paper will describe the instrument, how it will do its astrometric measurements and the expected performance based on the current technology.

Precision astrometry at microarcsecond accuracy has application to a wide range of astrophysical problems. This paper is a study of the science questions that can be addressed using an instrument that delivers parallaxes at about 4 microarcsec on targets as faint as V = 20, differential accuracy of 0.6 microarcsec on bright targets, and with flexible scheduling. The science topics are drawn primarily from the Team Key Projects, selected in 2000, for the Space Interferometry Mission PlanetQuest (SIM PlanetQuest). We use the capabilities of this mission to illustrate the importance of the next level of astrometric precision in modern astrophysics. SIM PlanetQuest is currently in the detailed design phase, having completed all of the enabling technologies needed for the flight instrument in 2005. It will be the first space-based long baseline Michelson interferometer designed for precision astrometry. SIM will contribute strongly to many astronomical fields including stellar and galactic astrophysics, planetary systems around nearby stars, and the study of quasar and AGN nuclei. SIM will search for planets with masses as small as an Earth orbiting in the `habitable zone' around the nearest stars using differential astrometry, and could discover many dozen if Earth-like planets are common. It will be the most capable instrument for detecting planets around young stars, thereby providing insights into how planetary systems are born and how they evolve with time. SIM will observe significant numbers of very high- and low-mass stars, providing stellar masses to 1%, the accuracy needed to challenge physical models. Using precision proper motion measurements, SIM will probe the galactic mass distribution and the formation and evolution of the Galactic halo. (abridged)

The past two Decadal Surveys in Astronomy and Astrophysics recommended the completion of a space-based interferometry mission, known today as SIM PlanetQuest, for its unique ability to detect and characterize nearby rocky planets (Bahcall 1991, McKee & Taylor 2001), as well as contributions to a broad range of problems in astrophysics. Numerous committees of the National Research Council as well as NASA Roadmaps have similarly highlighted SIM as the one technology that offers detection and characterization of rocky planets around nearby stars and which is technically ready. To date, SIM remains the only program with the capability of detecting and confirming rocky planets in the habitable zones of nearby solar-type stars. Moreover, SIM measures masses and three-dimensional orbits of habitable planets around nearby stars (within 25 pc); these are the only stars for which follow-up by other techniques is feasible, such as space-based spectroscopy, ground-based interferometry, and of course TPF.

SIM PlanetQuest (Space Interferometry Mission) is a space-borne Michelson interferometer for precision stellar astrometry, with a nine meter baseline, currently slated for launch in 2015. One of the principal science goals is the astrometric detection and orbit characterization of terrestrial planets in the habitable zones of nearby stars. Differential astrometry of the target star against a set of reference stars lying within a degree will allow measurement of the target star's reflex motion with astrometric accuracy of 1 micro-arcsecond in a single measurement. We assess SIM's capability for detection (as opposed to characterization by orbit determination) of terrestrial planets in the habitable zones of nearby solar-type stars. We compare SIM's performance on target lists optimized for the SIM and Terrestrial Planet Finder Coronograph (TPF-C) missions. Performance is quantified by three metrics: minimum detectable planet mass, number and mass distribution of detected planets, and completeness of detections in each mass range. Finally, we discuss the issue of confidence in detections and non-detections, and show how information from SIM's planet survey can enable TPF to increase its yield of terrestrial planets.

We present an analysis of observations of the bright star Altair (alpha Aql) obtained using the star camera on the Wide-Field Infrared Explorer (WIRE) satellite. Although Altair lies within the delta Scuti instability strip, previous observations have not revealed the presence of oscillations. However, the WIRE observations show Altair to be a low-amplitude (Delta m < 1 ppt) delta Scuti star with at least 7 modes present.

The first intensive photometric time-series of a Delta Scuti star was obtained from space. Theta2 Tau was monitored with the star camera on the Wide-Field Infrared Explorer (WIRE) satellite. Twelve independent frequencies were detected down to the 0.5 mmag amplitude level. Their reality was investigated by searching for them using two different algorithms and by some internal checks. All the frequencies are in the range 10.8-14.6 c\d. The histogram of the frequency spacings shows that 81% are below 1.8 c\d; rotation may thus play a role in the mode excitation. The fundamental radial mode is not observed, although it is expected to occur in a region where the noise level is very low (55 micromag). The rms residual is about two times lower than that usually obtained from successful ground--based multisite campaigns. The comparison of the results of previous campaigns with the new ones establishes the amplitude variability of some modes.

We have used the star camera on the WIRE satellite to observe the K0 III star Alpha UMa, and we report the apparent detection of 10 oscillation modes. The lowest frequency mode is at 1.82 microhertz, and appears to be the fundamental mode. The mean spacing between the mode frequencies is 2.94 microhertz, which implies that all detected modes are radial. The mode frequencies are consistent with the physical parameters of a K0 III star, if we assume that only radial modes are excited. Mode amplitudes are 100 -- 400 micromagnitudes, which is consistent with the scaling relation of Kjeldsen & Beddinge (1995).