This paper describes the system architecture of a newly constructed radio telescope - the Boolardy Engineering Test Array, which is a prototype of the Australian Square Kilometre Array Pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a 6-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least 9 dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations.

Path length changes through the atmosphere cause significant errors for astronomical radio interferometry at high frequencies (e.g. 100 GHz). Path length differences typically give rise to a differential excess path of 1mm for antennas separated by 1km, and have fluctuation time scales of greater than 10 seconds. To measure these fluctuations, we are building a four-channel radiometer centred on the 22 GHz water line. By sensing the water vapour emission, the excess path can be deduced and corrected. Multiple channels give us robustness against various systematic errors, but gain stability of the radiometer of 1 pair in 10^4 is still required.