We present constraints on an astrophysical population of neutrino sources imposed by recent data from the IceCube neutrino observatory. By using the IceCube point source search method to model the detection of sources, our detection criterion is more sensitive than using the observation of high-energy neutrino multiplets for source identification. We frame the problem as a Bayesian hierarchical model to connect the high-level population parameters to the IceCube data, allowing us to consistently account for all relevant sources of uncertainty in our model assumptions. Our results show that sources with a local density of $n_0 \gtrsim 10^{-7}$ $\rm{Mpc}^{-3}$ and luminosity $L \lesssim 10^{43}$ erg/s are the most likely candidates, but that populations of rare sources with $n_0 \simeq 10^{-9}$ $\rm{Mpc}^{-3}$ and $L \simeq 10^{45}$ erg/s can still be consistent with the IceCube observations. We demonstrate that these conclusions are strongly dependent on the source evolution considered, for which we consider a wide range of models. In doing so, we present realistic, model-independent constraints on the population parameters that reflect our current state of knowledge from astrophysical neutrino observations. We also use our framework to investigate constraints in the case of possible source detections and future instrument upgrades. Our approach is flexible and can be used to model specific source cases and extended to include multi-messenger information.

Compilation of papers presented by the JEM-EUSO Collaboration at the 36th International Cosmic Ray Conference (ICRC), held July 24 through August 1, 2019 in Madison, Wisconsin.

We present the data acquisition and control software for the operation of the Mini-Extreme Universe Space Observatory (EUSO), a space-based fluorescence telescope for the observation of extensive air showers and atmospheric phenomena. This framework has been extensively tested alongside the development of Mini-EUSO and was finalized ahead of the successful launch of the instrument to the ISS on August 22, 2019. The data acquisition, housekeeping, and subsystem control are achieved using custom-designed front-end electronics based on a Xilinx Zynq XC7Z030 chip interfaced with a PCIe/104 CPU module via the integrated Zynq processing system. The instrument control interface is handled using an object-oriented C++ design, which can be run both autonomously and interactively as required. Although developed for Mini-EUSO, the modular design of both the software and hardware can easily be scaled up to larger instrument designs and adapted to different subsystem and communication requirements. As such, this framework will also be used in the upgrade of the EUSO-TA instrument and potentially for the next EUSO-SPB2 NASA Balloon flight. The software and firmware presented are open source and released with detailed and integrated documentation.

Mini-EUSO will observe the Earth in the UV range (300 - 400 nm) offering the opportunity to study a variety of atmospheric events such as Transient Luminous Events (TLEs), meteors and marine bioluminescence. Furthermore it aims to search for Ultra High Energy Cosmic Rays (UHECR) above $10^{21}$ eV and Strange Quark Matter (SQM). The detector is expected to be launched to the International Space Station in August 2019 and look at the Earth in nadir mode from the UV-transparent window of the Zvezda module of the International Space Station. The instrument comprises a compact telescope with a large field of view ($44^{\circ}$), based on an optical system employing two Fresnel lenses for light collection. The light is focused onto an array of 36 multi-anode photomultiplier tubes (MAPMT), for a total of 2304 pixels and the resulting signal is converted into digital, processed and stored via the electronics subsystems on-board. In addition to the main detector, Mini-EUSO contains two ancillary cameras for complementary measurements in the near infrared (1500 - 1600 nm) and visible (400 - 780 nm) range and also a 8x8 SiPM imaging array.

Space Debris (SD) consist of non-operational artificial objects orbiting around the Earth, which could possibly damage space vehicles, such as the International Space Station (ISS) or other manned spacecrafts. The vast majority of such objects are cm-sized, not catalogued and usually the tracking data are not precise enough. Here we present the feasibility study of SD detection and tracking with techniques usually employed in cosmic-ray physics. For this purpose, we have evaluated the possibility of using Mini-EUSO, a space-borne fluorescence telescope to be deployed on the ISS, to track SD illuminated by the Sun. By means of ESAF (EUSO Simulation and analysis Framework) simulation and by developing the trigger algorithms, we estimated the minimum size and maximum distances of detectable SD. We then studied the number of possible SD detections using an ESA software called MASTER (Meteoroid and SD Terrestrial Environment Reference). With the Mini-EUSO Engineering Model (Mini-EUSO EM), we performed some measurements to estimate the reflectance of the most common SD materials and to demonstrate the ability of Mini-EUSO to detect SD events. We also performed some tests in open-sky conditions, identifying and tracking fast-moving objects. In particular, the detection of a rocket body allowed us to confirm the simulation outcomes predictions and the expected performance of the detector.

The JEM-EUSO program aims at detecting Ultra High Energy Cosmic Rays (UHECRs) by observing the fluorescence light produced by extensive air showers (EAS) in the Earth's atmosphere. Within this program, a new generation of missions is being built, including (i) Mini-EUSO that will be installed on board the ISS in August 2019, (ii) an upgrade to the ground-based telescope EUSO-TA and (iii) the second super pressure balloon flight (EUSO-SPB2). All these detectors will have a dedicated trigger system based on a board equipped with a Xilinx Zynq device that will be able to detect different types of events on three different time-scales: a microsecond time-scale for cosmic ray detection (L1), a hundreds of microsecond time-scale for slower events like transient luminous events (TLEs) (L2), and a tens of millisecond time-scale used to produce a continuous monitoring, for even slower events like meteors or nuclearites. The L1 trigger logic for the upgrade of EUSO-TA and EUSO-SPB2 are being developed taking into account the peculiarity of each detector (optic system, FOV, frame length) starting from the logic already developed for Mini-EUSO. In particular, every pixel will have an independent threshold that will be dynamically adapted to the level of the background; a predetermined condition on the number, the position and the time distribution of pixels above threshold has to be satisfied in order to issue a trigger. This contribution will summarize the L1 trigger logics and the tests currently performed.

EUSO-TA is a ground-based florescence detector built to validate the design of an ultra-high energy cosmic ray fluorescence detector to be operated in space. EUSO-TA detected the first air shower events with the technology developed within the JEM-EUSO program. It operates at the Telescope Array (TA) site in Utah, USA. With the external trigger provided by the Black Rock Mesa fluorescence detectors of Telescope Array (TA-FDs), EUSO-TA observed nine ultra-high energy cosmic ray events and several laser events from the Central Laser Facility of Telescope Array and portable lasers like the JEM-EUSO Global Light System prototype. The reconstruction parameters of the cosmic ray events which crossed the EUSO-TA field of view (both detected and not detected by EUSO-TA), were provided by the Telescope Array Collaboration. As the TA-FDs have a wider field of view than EUSO-TA ($\sim$30 times larger), they allow the cosmic ray energy reconstruction based on the observation of most of the extensive air-shower profiles, including the shower maximum, while EUSO-TA only observes a portion of the showers, usually far from the maximum. For this reason, the energy of the cosmic rays corresponding to the EUSO-TA signals appear lower than the actual ones. In this contribution, the analysis of the cosmic-ray events detected with EUSO-TA is discussed.

Mini-EUSO is a UV telescope that will look downwards to the Earth's atmosphere onboard the International Space Station. With the design of the ultra-high energy cosmic ray fluorescence detectors belonging to the JEM-EUSO program, it will make the first UV map of the Earth by observing atmospheric phenomena such as transient luminous events, sprites and lightning, as well as meteors and bioluminescence from earth. Diffused light from laser shots from the ground, which mimic the fluorescence light emitted by Nitrogen molecules when extensive air showers pass through the atmosphere, can be used to verify the capability of this kind of detector to observe ultra-high energy cosmic rays. To validate the electronics and the trigger algorithms developed for Mini-EUSO, a scaled down version of the telescope with 1:9 of the original focal surface and a lens of 2.5 cm diameter has been built. Tests of the Mini-EUSO engineering model have been made in laboratory and in open sky condition. In this paper, we report results of observations of the night sky, which include the detection of stars, meteors, a planet and a rocket body reflecting the sunlight. Interesting results of the observation of city lights are also reported.

The TurLab facility is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located in the Physics Department of the University of Turin. Originally, it was mainly built to study systems of different scales where rotation plays a key role in the fluid behavior such as in atmospheric and oceanic flows. In the past few years the TurLab facility has been used to perform experiments related to the observation of Extreme Energy Cosmic Rays (EECRs) from space using the fluorescence technique. For example, in the case of the JEM-EUSO mission, where the diffuse night brightness and artificial light sources can vary significantly in time and space inside the Field of View of the telescope. The Focal Surface of Mini-EUSO Engineering Model (Mini-EUSO EM) with the level 1 (L1) and 2 (L2) trigger logics implemented in the Photo-Detector Module (PDM) has been tested at TurLab. Tests related to the possibility of using an EUSO-like detector for other type of applications such as Space Debris (SD) monitoring and imaging detector have also been pursued. The tests and results obtained within the EUSO@TurLab Project on these different topics are presented.

We present a Bayesian hierarchical model which enables a joint fit of the ultra-high-energy cosmic ray (UHECR) energy spectrum and arrival directions within the context of a physical model for the UHECR phenomenology. In this way, possible associations with astrophysical source populations can be assessed in a physically and statistically principled manner. The importance of including the UHECR energy data and detection effects is demonstrated through simulation studies, showing that the effective GZK horizon is significantly extended for typical reconstruction uncertainties. We also verify the ability of the model to fit and recover physical parameters from CRPropa 3 simulations. Finally, the model is used to assess the fraction of the the publicly available dataset of 231 UHECRs detected by the Pierre Auger Observatory (PAO) which are associated with the Fermi-LAT 2FHL catalogue, a set of starburst galaxies and Swift-BAT hard X-ray sources. We find association fractions of 9.5 (+2.4,-5.9), 22.7 (+6.6, -12.4) and 22.8 (+6.6, -8.0) per cent for the 2FHL, starburst galaxies and Swift-BAT catalogues respectively.

EUSO-Balloon is a pathfinder mission for the Extreme Universe Space Observatory onboard the Japanese Experiment Module (JEM-EUSO). It was launched on the moonless night of the 25$^{th}$ of August 2014 from Timmins, Canada. The flight ended successfully after maintaining the target altitude of 38 km for five hours. One part of the mission was a 2.5 hour underflight using a helicopter equipped with three UV light sources (LED, xenon flasher and laser) to perform an inflight calibration and examine the detectors capability to measure tracks moving at the speed of light. We describe the helicopter laser system and details of the underflight as well as how the laser tracks were recorded and found in the data. These are the first recorded laser tracks measured from a fluorescence detector looking down on the atmosphere. Finally, we present a first reconstruction of the direction of the laser tracks relative to the detector.

The Mini-EUSO telescope is designed by the JEM-EUSO Collaboration to observe the UV emission of the Earth from the vantage point of the International Space Station (ISS) in low Earth orbit. The main goal of the mission is to map the Earth in the UV, thus increasing the technological readiness level of future EUSO experiments and to lay the groundwork for the detection of Extreme Energy Cosmic Rays (EECRs) from space. Due to its high time resolution of 2.5 us, Mini-EUSO is capable of detecting a wide range of UV phenomena in the Earth's atmosphere. In order to maximise the scientific return of the mission, it is necessary to implement a multi-level trigger logic for data selection over different timescales. This logic is key to the success of the mission and thus must be thoroughly tested and carefully integrated into the data processing system prior to the launch. This article introduces the motivation behind the trigger design and details the integration and testing of the logic.

The Mini-EUSO instrument is a UV telescope to be placed inside the International Space Station (ISS), looking down on the Earth from a nadir-facing window in the Russian Zvezda module. Mini-EUSO will map the earth in the UV range (300 - 400 nm) with a spatial resolution of 6.11km and a temporal resolution of 2.5 $\mu$s, offering the opportunity to study a variety of atmospheric events such as transient luminous events (TLEs) and meteors, as well as searching for strange quark matter and bioluminescence. Furthermore, Mini-EUSO will be used to detect space debris to verify the possibility of using a EUSO-class telescope in combination with a high energy laser for space debris remediation. The high-resolution mapping of the UV emissions from Earth orbit allows Mini-EUSO to serve as a pathfinder for the study of Extreme Energy Cosmic Rays (EECRs) from space by the JEM-EUSO collaboration.