Normalized to: Canup, R.
[1]
oai:arXiv.org:2005.00587 [pdf] - 2088299
Analytical Model for the Tidal Evolution of the Evection Resonance and
the Timing of Resonance Escape
Submitted: 2020-05-01
A high-angular momentum giant impact with the Earth can produce a Moon with a
silicate isotopic composition nearly identical to that of Earth's mantle,
consistent with observations of terrestrial and lunar rocks. However, such an
event requires subsequent angular momentum removal for consistency with the
current Earth-Moon system. The early Moon may have been captured into the
evection resonance, occurring when the lunar perigee precession period equals
one year. It has been proposed that after a high-angular momentum giant impact,
evection removed the angular momentum excess from the Earth-Moon pair and
transferred it to Earth's orbit about the Sun. However, prior N-body
integrations suggest this result depends on the tidal model and chosen tidal
parameters. Here we examine the Moon's encounter with evection using a
complementary analytic description and the Mignard tidal model. While the Moon
is in resonance the lunar longitude of perigee librates, and if tidal evolution
excites the libration amplitude sufficiently, escape from resonance occurs. The
angular momentum drain produced by formal evection depends on how long the
resonance is maintained. We estimate that resonant escape occurs early, leading
to only a small reduction (~few to 10%) in the Earth-Moon system angular
momentum. Moon formation from a high-angular momentum impact would then require
other angular momentum removal mechanisms beyond standard libration in
evection, as have been suggested previously.
[2]
oai:arXiv.org:1906.08293 [pdf] - 1953581
HydroSyMBA: a 1D hydrocode coupled with an N-body symplectic integrator
Submitted: 2019-06-19
The numerical modeling of co-existing circumplanetary disks/rings and
satellites is particularly challenging because each part of the system requires
a very different approach. Disks are generally well represented by a fluid-like
dense medium, whose evolution can be calculated by a hydrocode. On the other
hand, the orbital evolution of satellites is generally performed using N-body
integrators. We have developed a new numerical model that combines a
1-dimensional hydrocode with the N-body integrator SyMBA. The disk evolves due
to its viscosity, and resonant torques from satellites. The latter is applied
to the satellites as an additional "kick" to their accelerations. The
integrator also includes the ability to spawn new moonlets at the disk's outer
edge if the latter expands beyond a material-dependent Roche limit, as well as
the effects of tidal dissipation in the planet and/or the satellite on the
satellite orbits. The resulting integrator allows one to accurately model the
evolution of an inner circumplanetary disk, and the formation of satellites by
accumulation of disk material, all within a single self-consistent framework.
Potential applications include the formation of Earth's Moon, the evolution of
the inner Saturn system, the martian and uranian moons, and compact
exoplanetary systems.
[3]
oai:arXiv.org:1711.01581 [pdf] - 1590768
Triton's Evolution with a Primordial Neptunian Satellite System
Submitted: 2017-11-05
The Neptunian satellite system is unusual. The major satellites of Jupiter,
Saturn, and Uranus are all in prograde, low-inclination orbits. Neptune on the
other hand, has the fewest satellites, and most of the system's mass is within
one irregular satellite, Triton. Triton was most likely captured by Neptune and
destroyed the primordial regular satellite system. We investigate the
interactions between a newly captured Triton and a prior Neptunian satellite
system. We find that a prior satellite system with a mass ratio similar to the
Uranian system or smaller has a substantial likelihood of reproducing the
current Neptunian system, while a more massive system has a low probability of
leading to the current configuration. Moreover, Triton's interaction with a
prior satellite system may offer a mechanism to decrease its high initial
semimajor axis fast enough to preserve small irregular satellites (Nereid-like)
that might otherwise be lost during a prolonged Triton circularization via
tides alone.
[4]
oai:arXiv.org:1703.09741 [pdf] - 1767320
The Origin of Planetary Ring Systems
Submitted: 2017-03-28
This chapter of the book Planetary Ring Systems addresses the origin of
planetary rings, one of the least understood processes related to planet
formation and evolution. Whereas rings seem ubiquitous around giant planets,
their great diversity of mass, structure and composition is a challenge for any
formation scenario. Recent advances in our understanding of ring and satellite
formation and destruction suggest that these processes are interconnected, so
that rings and satellites may be two aspects of the same geological system.
However, no single theory seems able to explain the origin of the different
planetary rings known in our Solar System, and it now seems evident that rings
may result from a variety of processes like giant collisions, tidal stripping
of comets or satellites, as well as planet formation itself.
In order to build any theory of ring formation it is important to specify
physical processes that affect the long-term evolution of rings, as well as to
describe the different observations that any ring formation model should
explain. This is the topic of section 2. In section 3, we focus our attention
on Saturn's rings and their main properties, and then discuss the pros and cons
of a series of ring formation models. We also discuss the link between rings
and satellites. In section 4, we extend the discussion to the other giant
planets (Jupiter, Uranus, and Neptune). Section 5 is devoted to new types of
rings -- the recent discovery of rings orbiting small outer Solar System bodies
(Centaurs), and the possible rings around extrasolar planets. In section 6, we
conclude and try to identify critical observations and theoretical advances
needed to better understand the origin of rings and their significance in the
global evolution of planets.
[5]
oai:arXiv.org:1702.04385 [pdf] - 1535825
Accretion of Saturn's Inner Mid-sized Moons from a Massive Primordial
Ice Ring
Submitted: 2017-02-14
Saturn's rings are rock-poor, containing 90%-95% ice by mass. As a group,
Saturn's moons interior to and including Tethys are also about 90% ice. Tethys
itself contains <6% rock by mass, in contrast to its similar-mass outer
neighbor Dione, which contains >40% rock. Here we simulate the evolution of a
massive primordial ice-rich ring and the production of satellites as ring
material spreads beyond the Roche limit. We describe the Roche-interior ring
with an analytic model, and use an N-body code to describe material beyond the
Roche limit. We track the accretion and interactions of spawned satellites,
including tidal interaction with the planet, assuming a tidal dissipation
factor for Saturn of $Q~10^4$. We find that ring torques and capture of moons
into mutual resonances produce a system of ice-rich inner moons that extends
outward to approximately Tethys's orbit in $10^9$ years, even with relatively
slow orbital expansion due to tides. The resulting mass and semimajor axis
distribution of spawned moons resembles that of Mimas, Enceladus, and Tethys.
We estimate the mass of rock delivered to the moons by external cometary
impactors during a late heavy bombardment. We find that the inner moons receive
a mass in rock comparable to their current total rock content, while Dione and
Rhea receive an order-of-magnitude less rock than their current rock content.
This suggests that external ontamination may have been the primary source of
rock in the inner moons, and that Dione and Rhea formed from much more
rock-rich source material. Reproducing the distribution of rock among the
current inner moons is challenging, and appears to require large impactors
stochasticity and/or the presence of some rock in the initial ring.
[6]
oai:arXiv.org:1412.8080 [pdf] - 1530219
Accretion of the Moon from non-canonical disks
Submitted: 2014-12-27
Impacts that leave the Earth-Moon system with a large excess in angular
momentum have recently been advocated as a means of generating a protolunar
disc with a composition that is nearly identical to that of the Earth's mantle.
We here investigate the accretion of the Moon from discs generated by such
"non-canonical" impacts, which are typically more compact than discs produced
by canonical impacts and have a higher fraction of their mass initially located
inside the Roche limit. Our model predicts a similar overall accretional
history for both canonical and non-canonical discs, with the Moon forming in
three consecutive steps over hundreds of years. However, we find that, to yield
a lunar-mass Moon, the more compact non-canonical discs must initially be more
massive than implied by prior estimates, and only a few of the discs produced
by impact simulations to date appear to meet this condition. Non-canonical
impacts require that capture of the Moon into the evection resonance with the
Sun reduced the Earth-Moon angular momentum by a factor of 2 or more. We find
that the Moon's semimajor axis at the end of its accretion is approximately
$7R_\oplus$, which is comparable to the location of the evection resonance for
a post-impact Earth with a 2.5 h rotation period in the absence of a disc.
Thus, the dynamics of the Moon's assembly may directly affect its ability to be
captured into the resonance.
[7]
oai:arXiv.org:1210.0932 [pdf] - 1151819
Lunar accretion from a Roche-interior fluid disk
Submitted: 2012-10-02
We use a hybrid numerical approach to simulate the formation of the Moon from
an impact-generated disk, consisting of a fluid model for the disk inside the
Roche limit and an N-body code to describe accretion outside the Roche limit.
As the inner disk spreads due to a thermally regulated viscosity, material is
delivered across the Roche limit and accretes into moonlets that are added to
the N-body simulation. Contrary to an accretion timescale of a few months
obtained with prior pure N-body codes, here the final stage of the Moon's
growth is controlled by the slow spreading of the inner disk, resulting in a
total lunar accretion timescale of ~10^2 years. It has been proposed that the
inner disk may compositionally equilibrate with the Earth through diffusive
mixing, which offers a potential explanation for the identical oxygen isotope
compositions of the Earth and Moon. However, the mass fraction of the final
Moon that is derived from the inner disk is limited by resonant torques between
the disk and exterior growing moons. For initial disks containing < 2.5 lunar
masses (ML), we find that a final Moon with mass > 0.8ML contains < 60%
material derived from the inner disk, with this material preferentially
delivered to the Moon at the end of its accretion.
[8]
oai:arXiv.org:0812.4995 [pdf] - 19880
Origin of Europa and the Galilean Satellites
Submitted: 2008-12-29
Europa is believed to have formed near the very end of Jupiter's own
accretion, within a circumplanetary disk of gas and solid particles. We review
the formation of the Galilean satellites in the context of current constraints
and understanding of giant planet formation, focusing on recent models of
satellite growth within a circumjovian accretion disk produced during the final
stages of gas inflow to Jupiter. In such a disk, the Galilean satellites would
have accreted slowly, in more than 10^5 yr, and in a low pressure, low gas
density environment. Gravitational interactions between the satellites and the
gas disk lead to inward orbital migration and loss of satellites to Jupiter.
Such effects tend to select for a maximum satellite mass and a common total
satellite system mass compared to the planet's mass. One implication is that
multiple satellite systems may have formed and been lost during the final
stages of Jupiter's growth, with the Galilean satellites being the last
generation that survived as gas inflow to Jupiter ended. We conclude by
discussing open issues and implications for Europa's conditions of formation.