Normalized to: Canestrari, R.
[1]
oai:arXiv.org:1909.12149 [pdf] - 2041274
First detection of the Crab Nebula at TeV energies with a Cherenkov
telescope in a dual-mirror Schwarzschild-Couder configuration: the ASTRI-Horn
telescope
Lombardi, S.;
Catalano, O.;
Scuderi, S.;
Antonelli, L. A.;
Pareschi, G.;
Antolini, E.;
Arrabito, L.;
Bellassai, G.;
Bernloehr, K.;
Bigongiari, C.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bottcher, G. M.;
Bregeon, J.;
Bruno, P.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Conconi, P.;
Conforti, V.;
Contino, G.;
Cusumano, G.;
Pino, M. de Gouveia Dal;
Distefano, A.;
Farisato, G.;
Fermino, C.;
Fiorini, M.;
Frigo, A.;
Gallozzi, S.;
Gargano, C.;
Garozzo, S.;
Gianotti, F.;
Giarrusso, S.;
Gimenes, R.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Leto, G.;
Lucarelli, F.;
Maccarone, M. C.;
Marano, D.;
Martinetti, E.;
Micciche, A.;
Millul, R.;
Mineo, T.;
Nicotra, G.;
Occhipinti, G.;
Pagano, I.;
Perri, M.;
Romeo, G.;
Russo, F.;
Russo, F.;
Sacco, B.;
Sangiorgi, P.;
Saturni, F. G.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Stringhetti, L.;
Tagliaferri, G.;
Tavani, M.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Umana, G.;
Vercellone, S.;
Sanchez, R. Zanmar;
Arcaro, C.;
Bulgarelli, A.;
Cardillo, M.;
Cascone, E.;
Costa, A.;
D'Ai, A.;
D'Ammando, F.;
Del Santo, M.;
Fioretti, V.;
Lamastra, A.;
Mereghetti, S.;
Pintore, F.;
Rodeghiero, G.;
Romano, P.;
Schwarz, J.;
Sciacca, E.;
Vitello, F. R.;
Wolter, A.
Submitted: 2019-09-26, last modified: 2020-02-03
We report on the first detection of very high-energy (VHE) gamma-ray emission
from the Crab Nebula by a Cherenkov telescope in dual-mirror
Schwarzschild-Couder (SC) configuration. The result has been achieved by means
of the 4 m size ASTRI-Horn telescope, operated on Mt. Etna (Italy) and
developed in the context of the Cherenkov Telescope Array Observatory
preparatory phase. The dual-mirror SC design is aplanatic and characterized by
a small plate scale, allowing us to implement large field of view cameras with
small-size pixel sensors and a high compactness. The curved focal plane of the
ASTRI camera is covered by silicon photo-multipliers (SiPMs), managed by an
unconventional front-end electronics based on a customized peak-sensing
detector mode. The system includes internal and external calibration systems,
hardware and software for control and acquisition, and the complete data
archiving and processing chain. The observations of the Crab Nebula were
carried out in December 2018, during the telescope verification phase, for a
total observation time (after data selection) of 24.4 h, equally divided into
on- and off-axis source exposure. The camera system was still under
commissioning and its functionality was not yet completely exploited.
Furthermore, due to recent eruptions of the Etna Volcano, the mirror reflection
efficiency was reduced. Nevertheless, the observations led to the detection of
the source with a statistical significance of 5.4 sigma above an energy
threshold of ~3 TeV. This result provides an important step towards the use of
dual-mirror systems in Cherenkov gamma-ray astronomy. A pathfinder mini-array
based on nine large field-of-view ASTRI-like telescopes is under
implementation.
[3]
oai:arXiv.org:1709.07997 [pdf] - 1838112
Science with the Cherenkov Telescope Array
Consortium, The Cherenkov Telescope Array;
:;
Acharya, B. S.;
Agudo, I.;
Samarai, I. Al;
Alfaro, R.;
Alfaro, J.;
Alispach, C.;
Batista, R. Alves;
Amans, J. -P.;
Amato, E.;
Ambrosi, G.;
Antolini, E.;
Antonelli, L. A.;
Aramo, C.;
Araya, M.;
Armstrong, T.;
Arqueros, F.;
Arrabito, L.;
Asano, K.;
Ashley, M.;
Backes, M.;
Balazs, C.;
Balbo, M.;
Ballester, O.;
Ballet, J.;
Bamba, A.;
Barkov, M.;
de Almeida, U. Barres;
Barrio, J. A.;
Bastieri, D.;
Becherini, Y.;
Belfiore, A.;
Benbow, W.;
Berge, D.;
Bernardini, E.;
Bernardini, M. G.;
Bernardos, M.;
Bernlöhr, K.;
Bertucci, B.;
Biasuzzi, B.;
Bigongiari, C.;
Biland, A.;
Bissaldi, E.;
Biteau, J.;
Blanch, O.;
Blazek, J.;
Boisson, C.;
Bolmont, J.;
Bonanno, G.;
Bonardi, A.;
Bonavolontà, C.;
Bonnoli, G.;
Bosnjak, Z.;
Böttcher, M.;
Braiding, C.;
Bregeon, J.;
Brill, A.;
Brown, A. M.;
Brun, P.;
Brunetti, G.;
Buanes, T.;
Buckley, J.;
Bugaev, V.;
Bühler, R.;
Bulgarelli, A.;
Bulik, T.;
Burton, M.;
Burtovoi, A.;
Busetto, G.;
Canestrari, R.;
Capalbi, M.;
Capitanio, F.;
Caproni, A.;
Caraveo, P.;
Cárdenas, V.;
Carlile, C.;
Carosi, R.;
Carquín, E.;
Carr, J.;
Casanova, S.;
Cascone, E.;
Catalani, F.;
Catalano, O.;
Cauz, D.;
Cerruti, M.;
Chadwick, P.;
Chaty, S.;
Chaves, R. C. G.;
Chen, A.;
Chen, X.;
Chernyakova, M.;
Chikawa, M.;
Christov, A.;
Chudoba, J.;
Cieślar, M.;
Coco, V.;
Colafrancesco, S.;
Colin, P.;
Conforti, V.;
Connaughton, V.;
Conrad, J.;
Contreras, J. L.;
Cortina, J.;
Costa, A.;
Costantini, H.;
Cotter, G.;
Covino, S.;
Crocker, R.;
Cuadra, J.;
Cuevas, O.;
Cumani, P.;
D'Aì, A.;
D'Ammando, F.;
D'Avanzo, P.;
D'Urso, D.;
Daniel, M.;
Davids, I.;
Dawson, B.;
Dazzi, F.;
De Angelis, A.;
Anjos, R. de Cássia dos;
De Cesare, G.;
De Franco, A.;
Pino, E. M. de Gouveia Dal;
de la Calle, I.;
Lopez, R. de los Reyes;
De Lotto, B.;
De Luca, A.;
De Lucia, M.;
de Naurois, M.;
Wilhelmi, E. de Oña;
De Palma, F.;
De Persio, F.;
de Souza, V.;
Deil, C.;
Del Santo, M.;
Delgado, C.;
della Volpe, D.;
Di Girolamo, T.;
Di Pierro, F.;
Di Venere, L.;
Díaz, C.;
Dib, C.;
Diebold, S.;
Djannati-Ataï, A.;
Domínguez, A.;
Prester, D. Dominis;
Dorner, D.;
Doro, M.;
Drass, H.;
Dravins, D.;
Dubus, G.;
Dwarkadas, V. V.;
Ebr, J.;
Eckner, C.;
Egberts, K.;
Einecke, S.;
Ekoume, T. R. N.;
Elsässer, D.;
Ernenwein, J. -P.;
Espinoza, C.;
Evoli, C.;
Fairbairn, M.;
Falceta-Goncalves, D.;
Falcone, A.;
Farnier, C.;
Fasola, G.;
Fedorova, E.;
Fegan, S.;
Fernandez-Alonso, M.;
Fernández-Barral, A.;
Ferrand, G.;
Fesquet, M.;
Filipovic, M.;
Fioretti, V.;
Fontaine, G.;
Fornasa, M.;
Fortson, L.;
Coromina, L. Freixas;
Fruck, C.;
Fujita, Y.;
Fukazawa, Y.;
Funk, S.;
Füßling, M.;
Gabici, S.;
Gadola, A.;
Gallant, Y.;
Garcia, B.;
López, R. Garcia;
Garczarczyk, M.;
Gaskins, J.;
Gasparetto, T.;
Gaug, M.;
Gerard, L.;
Giavitto, G.;
Giglietto, N.;
Giommi, P.;
Giordano, F.;
Giro, E.;
Giroletti, M.;
Giuliani, A.;
Glicenstein, J. -F.;
Gnatyk, R.;
Godinovic, N.;
Goldoni, P.;
Gómez-Vargas, G.;
González, M. M.;
González, J. M.;
Götz, D.;
Graham, J.;
Grandi, P.;
Granot, J.;
Green, A. J.;
Greenshaw, T.;
Griffiths, S.;
Gunji, S.;
Hadasch, D.;
Hara, S.;
Hardcastle, M. J.;
Hassan, T.;
Hayashi, K.;
Hayashida, M.;
Heller, M.;
Helo, J. C.;
Hermann, G.;
Hinton, J.;
Hnatyk, B.;
Hofmann, W.;
Holder, J.;
Horan, D.;
Hörandel, J.;
Horns, D.;
Horvath, P.;
Hovatta, T.;
Hrabovsky, M.;
Hrupec, D.;
Humensky, T. B.;
Hütten, M.;
Iarlori, M.;
Inada, T.;
Inome, Y.;
Inoue, S.;
Inoue, T.;
Inoue, Y.;
Iocco, F.;
Ioka, K.;
Iori, M.;
Ishio, K.;
Iwamura, Y.;
Jamrozy, M.;
Janecek, P.;
Jankowsky, D.;
Jean, P.;
Jung-Richardt, I.;
Jurysek, J.;
Kaaret, P.;
Karkar, S.;
Katagiri, H.;
Katz, U.;
Kawanaka, N.;
Kazanas, D.;
Khélifi, B.;
Kieda, D. B.;
Kimeswenger, S.;
Kimura, S.;
Kisaka, S.;
Knapp, J.;
Knödlseder, J.;
Koch, B.;
Kohri, K.;
Komin, N.;
Kosack, K.;
Kraus, M.;
Krause, M.;
Krauß, F.;
Kubo, H.;
Mezek, G. Kukec;
Kuroda, H.;
Kushida, J.;
La Palombara, N.;
Lamanna, G.;
Lang, R. G.;
Lapington, J.;
Blanc, O. Le;
Leach, S.;
Lees, J. -P.;
Lefaucheur, J.;
de Oliveira, M. A. Leigui;
Lenain, J. -P.;
Lico, R.;
Limon, M.;
Lindfors, E.;
Lohse, T.;
Lombardi, S.;
Longo, F.;
López, M.;
López-Coto, R.;
Lu, C. -C.;
Lucarelli, F.;
Luque-Escamilla, P. L.;
Lyard, E.;
Maccarone, M. C.;
Maier, G.;
Majumdar, P.;
Malaguti, G.;
Mandat, D.;
Maneva, G.;
Manganaro, M.;
Mangano, S.;
Marcowith, A.;
Marín, J.;
Markoff, S.;
Martí, J.;
Martin, P.;
Martínez, M.;
Martínez, G.;
Masetti, N.;
Masuda, S.;
Maurin, G.;
Maxted, N.;
Mazin, D.;
Medina, C.;
Melandri, A.;
Mereghetti, S.;
Meyer, M.;
Minaya, I. A.;
Mirabal, N.;
Mirzoyan, R.;
Mitchell, A.;
Mizuno, T.;
Moderski, R.;
Mohammed, M.;
Mohrmann, L.;
Montaruli, T.;
Moralejo, A.;
Morcuende-Parrilla, D.;
Mori, K.;
Morlino, G.;
Morris, P.;
Morselli, A.;
Moulin, E.;
Mukherjee, R.;
Mundell, C.;
Murach, T.;
Muraishi, H.;
Murase, K.;
Nagai, A.;
Nagataki, S.;
Nagayoshi, T.;
Naito, T.;
Nakamori, T.;
Nakamura, Y.;
Niemiec, J.;
Nieto, D.;
Nikołajuk, M.;
Nishijima, K.;
Noda, K.;
Nosek, D.;
Novosyadlyj, B.;
Nozaki, S.;
O'Brien, P.;
Oakes, L.;
Ohira, Y.;
Ohishi, M.;
Ohm, S.;
Okazaki, N.;
Okumura, A.;
Ong, R. A.;
Orienti, M.;
Orito, R.;
Osborne, J. P.;
Ostrowski, M.;
Otte, N.;
Oya, I.;
Padovani, M.;
Paizis, A.;
Palatiello, M.;
Palatka, M.;
Paoletti, R.;
Paredes, J. M.;
Pareschi, G.;
Parsons, R. D.;
Pe'er, A.;
Pech, M.;
Pedaletti, G.;
Perri, M.;
Persic, M.;
Petrashyk, A.;
Petrucci, P.;
Petruk, O.;
Peyaud, B.;
Pfeifer, M.;
Piano, G.;
Pisarski, A.;
Pita, S.;
Pohl, M.;
Polo, M.;
Pozo, D.;
Prandini, E.;
Prast, J.;
Principe, G.;
Prokhorov, D.;
Prokoph, H.;
Prouza, M.;
Pühlhofer, G.;
Punch, M.;
Pürckhauer, S.;
Queiroz, F.;
Quirrenbach, A.;
Rainò, S.;
Razzaque, S.;
Reimer, O.;
Reimer, A.;
Reisenegger, A.;
Renaud, M.;
Rezaeian, A. H.;
Rhode, W.;
Ribeiro, D.;
Ribó, M.;
Richtler, T.;
Rico, J.;
Rieger, F.;
Riquelme, M.;
Rivoire, S.;
Rizi, V.;
Rodriguez, J.;
Fernandez, G. Rodriguez;
Vázquez, J. J. Rodríguez;
Rojas, G.;
Romano, P.;
Romeo, G.;
Rosado, J.;
Rovero, A. C.;
Rowell, G.;
Rudak, B.;
Rugliancich, A.;
Rulten, C.;
Sadeh, I.;
Safi-Harb, S.;
Saito, T.;
Sakaki, N.;
Sakurai, S.;
Salina, G.;
Sánchez-Conde, M.;
Sandaker, H.;
Sandoval, A.;
Sangiorgi, P.;
Sanguillon, M.;
Sano, H.;
Santander, M.;
Sarkar, S.;
Satalecka, K.;
Saturni, F. G.;
Schioppa, E. J.;
Schlenstedt, S.;
Schneider, M.;
Schoorlemmer, H.;
Schovanek, P.;
Schulz, A.;
Schussler, F.;
Schwanke, U.;
Sciacca, E.;
Scuderi, S.;
Seitenzahl, I.;
Semikoz, D.;
Sergijenko, O.;
Servillat, M.;
Shalchi, A.;
Shellard, R. C.;
Sidoli, L.;
Siejkowski, H.;
Sillanpää, A.;
Sironi, G.;
Sitarek, J.;
Sliusar, V.;
Slowikowska, A.;
Sol, H.;
Stamerra, A.;
Stanič, S.;
Starling, R.;
Stawarz, Ł.;
Stefanik, S.;
Stephan, M.;
Stolarczyk, T.;
Stratta, G.;
Straumann, U.;
Suomijarvi, T.;
Supanitsky, A. D.;
Tagliaferri, G.;
Tajima, H.;
Tavani, M.;
Tavecchio, F.;
Tavernet, J. -P.;
Tayabaly, K.;
Tejedor, L. A.;
Temnikov, P.;
Terada, Y.;
Terrier, R.;
Terzic, T.;
Teshima, M.;
Testa, V.;
Thoudam, S.;
Tian, W.;
Tibaldo, L.;
Tluczykont, M.;
Peixoto, C. J. Todero;
Tokanai, F.;
Tomastik, J.;
Tonev, D.;
Tornikoski, M.;
Torres, D. F.;
Torresi, E.;
Tosti, G.;
Tothill, N.;
Tovmassian, G.;
Travnicek, P.;
Trichard, C.;
Trifoglio, M.;
Pujadas, I. Troyano;
Tsujimoto, S.;
Umana, G.;
Vagelli, V.;
Vagnetti, F.;
Valentino, M.;
Vallania, P.;
Valore, L.;
van Eldik, C.;
Vandenbroucke, J.;
Varner, G. S.;
Vasileiadis, G.;
Vassiliev, V.;
Acosta, M. Vázquez;
Vecchi, M.;
Vega, A.;
Vercellone, S.;
Veres, P.;
Vergani, S.;
Verzi, V.;
Vettolani, G. P.;
Viana, A.;
Vigorito, C.;
Villanueva, J.;
Voelk, H.;
Vollhardt, A.;
Vorobiov, S.;
Vrastil, M.;
Vuillaume, T.;
Wagner, S. J.;
Wagner, R.;
Walter, R.;
Ward, J. E.;
Warren, D.;
Watson, J. J.;
Werner, F.;
White, M.;
White, R.;
Wierzcholska, A.;
Wilcox, P.;
Will, M.;
Williams, D. A.;
Wischnewski, R.;
Wood, M.;
Yamamoto, T.;
Yamazaki, R.;
Yanagita, S.;
Yang, L.;
Yoshida, T.;
Yoshiike, S.;
Yoshikoshi, T.;
Zacharias, M.;
Zaharijas, G.;
Zampieri, L.;
Zandanel, F.;
Zanin, R.;
Zavrtanik, M.;
Zavrtanik, D.;
Zdziarski, A. A.;
Zech, A.;
Zechlin, H.;
Zhdanov, V. I.;
Ziegler, A.;
Zorn, J.
Submitted: 2017-09-22, last modified: 2018-01-21
The Cherenkov Telescope Array, CTA, will be the major global observatory for
very high energy gamma-ray astronomy over the next decade and beyond. The
scientific potential of CTA is extremely broad: from understanding the role of
relativistic cosmic particles to the search for dark matter. CTA is an explorer
of the extreme universe, probing environments from the immediate neighbourhood
of black holes to cosmic voids on the largest scales. Covering a huge range in
photon energy from 20 GeV to 300 TeV, CTA will improve on all aspects of
performance with respect to current instruments.
The observatory will operate arrays on sites in both hemispheres to provide
full sky coverage and will hence maximize the potential for the rarest
phenomena such as very nearby supernovae, gamma-ray bursts or gravitational
wave transients. With 99 telescopes on the southern site and 19 telescopes on
the northern site, flexible operation will be possible, with sub-arrays
available for specific tasks. CTA will have important synergies with many of
the new generation of major astronomical and astroparticle observatories.
Multi-wavelength and multi-messenger approaches combining CTA data with those
from other instruments will lead to a deeper understanding of the broad-band
non-thermal properties of target sources.
The CTA Observatory will be operated as an open, proposal-driven observatory,
with all data available on a public archive after a pre-defined proprietary
period. Scientists from institutions worldwide have combined together to form
the CTA Consortium. This Consortium has prepared a proposal for a Core
Programme of highly motivated observations. The programme, encompassing
approximately 40% of the available observing time over the first ten years of
CTA operation, is made up of individual Key Science Projects (KSPs), which are
presented in this document.
[5]
oai:arXiv.org:1709.08418 [pdf] - 1602645
First optical validation of a Schwarzschild Couder telescope: the ASTRI
SST-2M Cherenkov telescope
Giro, E.;
Canestrari, R.;
Sironi, G.;
Antolini, E.;
Conconi, P.;
Fermino, C. E.;
Gargano, C.;
Rodeghiero, G.;
Russo, F;
Scuderi, S.;
Tosti, G.;
Vassiliev, V.;
Pareschi, G.
Submitted: 2017-09-25, last modified: 2017-10-11
The Cherenkov Telescope Array (CTA) represents the most advanced facility
designed for Cherenkov Astronomy. ASTRI SST-2M has been developed as a
demonstrator for the Small Size Telescope in the context of the upcoming CTA.
Its main innovation consists in the optical layout which implements the
Schwarzschild-Couder configuration and is fully validated for the first time.
The ASTRI SST-2M optical system represents the first qualified example for two
mirrors telescope for Cherenkov Astronomy.
This configuration permits to (i) maintain a high optical quality across a
large FoV (ii) de-magnify the plate scale, (iii) exploit new technological
solutions for focal plane sensors. The goal of the paper is to present the
optical qualification of the ASTRI SST-2M telescope. The qualification has been
obtained measuring the PSF sizes generated in the focal plane at various
distance from the optical axis. These values have been compared with the
performances expected by design.
After an introduction on the Gamma Astronomy from the ground, the optical
design and how it has been implemented for ASTRI SST-2M is discussed. Moreover
the description of the setup used to qualify the telescope over the full field
of view is shown.
We report the results of the first--light optical qualification. The required
specification of a flat PSF of $\sim 10$ arcmin in a large field of view ~10
deg has been demonstrated. These results validate the design specifications,
opening a new scenario for Cherenkov Gamma ray Astronomy and, in particular,
for the detection of high energy (5 - 300 TeV) gamma rays and wide-field
observations with CTA.
[7]
oai:arXiv.org:1610.00693 [pdf] - 1490079
Computation and validation of two-dimensional PSF simulation based on
physical optics
Submitted: 2016-10-03
The Point Spread Function (PSF) is a key figure of merit for specifying the
angular resolution of optical systems and, as the demand for higher and higher
angular resolution increases, the problem of surface finishing must be taken
seriously even in optical telescopes. From the optical design of the
instrument, reliable ray-tracing routines allow computing and display of the
PSF based on geometrical optics. However, such an approach does not directly
account for the scattering caused by surface microroughness, which is
interferential in nature. Although the scattering effect can be separately
modeled, its inclusion in the ray-tracing routine requires assumptions that are
difficult to verify. In that context, a purely physical optics approach is more
appropriate as it remains valid regardless of the shape and size of the defects
appearing on the optical surface. Such a computation, when performed in
two-dimensional consideration, is memory and time consuming because it requires
one to process a surface map with a few micron resolution, and the situation
becomes even more complicated in case of optical systems characterized by more
than one reflection. Fortunately, the computation is significantly simplified
in far-field configuration, since the computation involves only a sequence of
Fourier Transforms. In this paper, we provide validation of the PSF simulation
with Physical Optics approach through comparison with real PSF measurement data
in the case of ASTRI-SST M1 hexagonal segments. These results represent a first
foundation stone for future development in a more advanced computation taking
into account microroughness and multiple reflection in optical systems.
[8]
oai:arXiv.org:1610.00723 [pdf] - 1490921
Roughness tolerances for Cherenkov telescope mirrors
Submitted: 2016-10-03
The Cherenkov Telescope Array (CTA) is a forthcoming international
ground-based observatory for very high-energy gamma rays. Its goal is to reach
sensitivity five to ten times better than existing Cherenkov telescopes such as
VERITAS, H.E.S.S. or MAGIC and extend the range of observation to energies down
to few tens of GeV and beyond 100 TeV. To achieve this goal, an array of about
100 telescopes is required, meaning a total reflective surface of several
thousands of square meters. Thence, the optimal technology used for CTA mirrors
manufacture should be both low-cost (~1000 euros/m2) and allow high optical
performances over the 300-550 nm wavelength range. More exactly, a reflectivity
higher than 85% and a PSF (Point Spread Function) diameter smaller than 1 mrad.
Surface roughness can significantly contribute to PSF broadening and limit
telescope performances. Fortunately, manufacturing techniques for mirrors are
now available to keep the optical scattering well below the
geometrically-predictable effect of figure errors. This paper determines first
order surface finish tolerances based on a surface microroughness
characterization campaign, using Phase Shift Interferometry. That allows us to
compute the roughness contribution to Cherenkov telescope PSF. This study is
performed for diverse mirror candidates (MAGIC-I and II, ASTRI, MST) varying in
manufacture technologies, selected coating materials and taking into account
the degradation over time due to environmental hazards.
[9]
oai:arXiv.org:1504.02962 [pdf] - 1337367
A facility to evaluate the focusing performance of mirrors for Cherenkov
Telescopes
Submitted: 2015-04-12, last modified: 2016-01-08
Cherenkov Telescopes are equipped with optical dishes of large diameter -- in
general based on segmented mirrors -- with typical angular resolution of a few
arc-minutes. To evaluate the mirror's quality specific metrological systems are
required that possibly take into account the environmental conditions in which
typically these telescopes operate (in open air without dome protection). For
this purpose a new facility for the characterization of mirrors has been
developed at the labs of the Osservatorio Astronomico di Brera of the Italian
National Institute of Astrophysics. The facility allows the precise measurement
of the radius of curvature and the distribution of the concentred light in
terms of focused and scattered components and it works in open air. In this
paper we describe the facility and report some examples of its measuring
capabilities.
[10]
oai:arXiv.org:1509.04769 [pdf] - 1278414
Analysis of microroughness evolution in X-ray astronomical multilayer
mirrors by surface topography with the MPES program and by X-ray scattering
Submitted: 2015-09-15
Future hard X-ray telescopes (e.g. SIMBOL-X and Constellation-X) will make
use of hard X-ray optics with multilayer coatings, with angular resolutions
comparable to the achieved ones in the soft X-rays. One of the crucial points
in X-ray optics, indeed, is multilayer interfacial microroughness that causes
effective area reduction and X-Ray Scattering (XRS). The latter, in particular,
is responsible for image quality degradation. Interfacial smoothness
deterioration in multilayer deposition processes is commonly observed as a
result of substrate profile replication and intrinsic random deposition noise.
For this reason, roughness growth should be carefully investigated by surface
topographic analysis, X-ray reflectivity and XRS measurements. It is convenient
to express the roughness evolution in terms of interface Power Spectral
Densities (PSD), that are directly related to XRS and, in turn, in affecting
the optic HEW (Half Energy Width). In order to interpret roughness
amplification and to help us to predict the imaging performance of hard X-ray
optics, we have implemented a well known kinetic continuum equation model in a
IDL language program (MPES, Multilayer PSDs Evolution Simulator), allowing us
the determination of characteristic growth parameters in multilayer coatings.
In this paper we present some results from analysis we performed on several
samples coated with hard X-ray multilayers (W/Si, Pt/C, Mo/Si) using different
deposition techniques. We show also the XRS predictions resulting from the
obtained modelizations, in comparison to the experimental XRS measurements
performed at the energy of 8.05 keV.
[12]
oai:arXiv.org:1509.02264 [pdf] - 1273349
Characterization of multilayer stack parameters from X-ray reflectivity
data using the PPM program: measurements and comparison with TEM results
Submitted: 2015-09-08
Future hard (10 -100 keV) X-ray telescopes (SIMBOL-X, Con-X, HEXIT-SAT, XEUS)
will implement focusing optics with multilayer coatings: in view of the
production of these optics we are exploring several deposition techniques for
the reflective coatings. In order to evaluate the achievable optical
performance X-Ray Reflectivity (XRR) measurements are performed, which are
powerful tools for the in-depth characterization of multilayer properties
(roughness, thickness and density distribution). An exact extraction of the
stack parameters is however difficult because the XRR scans depend on them in a
complex way. The PPM code, developed at ERSF in the past years, is able to
derive the layer-by-layer properties of multilayer structures from
semi-automatic XRR scan fittings by means of a global minimization procedure in
the parameters space. In this work we will present the PPM modeling of some
multilayer stacks (Pt/C and Ni/C) deposited by simple e-beam evaporation.
Moreover, in order to verify the predictions of PPM, the obtained results are
compared with TEM profiles taken on the same set of samples. As we will show,
PPM results are in good agreement with the TEM findings. In addition, we show
that the accurate fitting returns a physically correct evaluation of the
variation of layers thickness through the stack, whereas the thickness trend
derived from TEM profiles can be altered by the superposition of roughness
profiles in the sample image.
[13]
oai:arXiv.org:1405.4187 [pdf] - 1579525
The INAF ASTRI Project in the framework of CTA
La Palombara, N.;
Caraveo, P.;
Fiorini, M.;
Stringhetti, L.;
Canestrari, R.;
Millul, R.;
Pareschi, G.;
Catalano, O.;
Maccarone, M. C.;
Vercellone, S.;
Giro, E.;
Tosti, G.
Submitted: 2014-05-16
The ASTRI project aims to develop, in the framework of the Cherenkov
Telescope Array, an end-to-end prototype of the small-size telescope, devoted
to the investigation of the energy range ~ 1-100 TeV. The proposed design is
characterized by two challenging but innovative technological solutions which
will be adopted for the first time on a Cherenkov telescope: a dual-mirror
Schwarzschild-Couder configuration and a modular, light and compact camera
based on Silicon photo-multipliers. Here we describe the prototype design, the
expected performance and the possibility to realize a mini array composed by a
few such telescopes, which shall be placed at the final CTA Southern Site.
[14]
oai:arXiv.org:1310.1713 [pdf] - 728971
Status of the technologies for the production of the Cherenkov Telescope
Array (CTA) mirrors
Pareschi, G.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
de Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Förster, A.;
Garczarczyk, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
Mandat, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-10-07
The Cherenkov Telescope Array (CTA) is the next generation very high-energy
gamma-ray observatory, with at least 10 times higher sensitivity than current
instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov
Telescopes (IACTs) operated in array-mode and divided into three size classes:
large, medium and small telescopes. The total reflective surface could be up to
10,000 m2 requiring unprecedented technological efforts. The properties of the
reflector directly influence the telescope performance and thus constitute a
fundamental ingredient to improve and maintain the sensitivity. The R&D status
of lightweight, reliable and cost-effective mirror facets for the CTA telescope
reflectors for the different classes of telescopes is reviewed in this paper.
[16]
oai:arXiv.org:1307.6847 [pdf] - 1172984
The ASTRI Mini-Array Software System
Tosti, G.;
Schwarz, J.;
Antonelli, L. A.;
Trifoglio, M.;
Leto, G.;
Gianotti, F.;
Canestrari, R.;
Catalano, O.;
Fiorini, M.;
Giro, E.;
La Palombra, N.;
Maccarone, M. C.;
Pareschi, G.;
Stringhetti, L.;
Vercellone, S.
Submitted: 2013-07-25
ASTRI ("Astrofisica con Specchi a Tecnologia Replicante Italiana") is a
Flagship Project financed by the Italian Ministry of Education, University and
Research, and led by INAF, the Italian National Institute of Astrophysics. Main
goals of the ASTRI project are the realization of an end-to-end prototype of a
Small Size Telescope (SST) for the Cherenkov Telescope Array (CTA) in a
dual-mirror configuration (SST-2M) and, subsequently, of a mini-array composed
of a few SST-2M telescopes to be placed at the final CTA Southern Site. Here we
present the main features of the Mini-Array Software System (MASS) that has a
central role in the success of the ASTRI Project and will also serve as a
prototype for the CTA software system. The MASS will provide a set of tools to
prepare an observing proposal, to perform the observations specified therein
(monitoring and controlling all the hardware components of each telescope), to
analyze the acquired data online and to store/retrieve all the data products
to/from the archive.}
[17]
oai:arXiv.org:1307.5671 [pdf] - 696181
The ASTRI Mini-Array Science Case
Vercellone, S.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto', A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Zitelli, V.;
Tavecchio, F.
Submitted: 2013-07-22
ASTRI is a Flagship Project financed by the Italian Ministry of Education,
University and Research, and led by INAF, the Italian National Institute of
Astrophysics. Within this framework, INAF is currently developing an end-to-end
prototype of a Small Size Telescope in a dual-mirror configuration (SST-2M) for
the Cherenkov Telescope Array (CTA), scheduled to start data acquisition in
2014. Although the ASTRI SST-2M prototype is mainly a technological
demonstrator, it will perform scientific observations of the Crab Nebula, Mrk
421 and Mrk 501 at E>1 TeV. A remarkable improvement in terms of performance
could come from the operation, in 2016, of a SST-2M mini-array, composed of a
few SST-2M telescopes to be placed at final CTA Southern Site. The SST
mini-array will be able to study in great detail relatively bright sources (a
few x 10E-12 erg/cm2/s at 10 TeV) with angular resolution of a few arcmin and
energy resolution of about 10-15%. Thanks to the stereo approach, it will be
possible to verify the wide field of view (FoV) performance through the
detections of very high-energy showers with core located at a distance up to
500 m, to compare the mini-array performance with the Monte Carlo expectations
by means of deep observations of selected targets, and to perform the first CTA
science at the beginning of the mini-array operations. Prominent sources such
as extreme blazars, nearby well-known BL Lac objects and radio-galaxies,
galactic pulsar wind nebulae, supernovae remnants, micro-quasars, and the
Galactic Center can be observed in a previously unexplored energy range, in
order to investigate the electron acceleration and cooling, relativistic and
non relativistic shocks, the search for cosmic-ray (CR) Pevatrons, the study of
the CR propagation, and the impact of the extragalactic background light on the
spectra of the sources.
[18]
oai:arXiv.org:1307.5405 [pdf] - 696157
Boosting the performance of the ASTRI SST-2M prototype: reflective and
anti-reflective coatings
Submitted: 2013-07-20
ASTRI is a Flagship Project of the Italian Ministry of Education, University
and Research, led by the Italian National Institute of Astrophysics, INAF. One
of the main aims of the ASTRI Project is the design, construction and
verification on-field of a dual mirror (2M) end-to-end prototype for the Small
Size Telescope (SST) envisaged to become part of the Cherenkov Telescope Array.
The ASTRI SST-2M prototype adopts the Schwarzschild-Couder design, and a camera
based on SiPM (Silicon Photo Multiplier); it will be assembled at the INAF
astronomical site of Serra La Nave on mount Etna (Catania, Italy) within mid
2014, and will start scientific validation phase soon after. The peculiarities
of the optical design and of the SiPM bandpass pushed towards specifically
optimized choices in terms of reflective coatings for both the primary and the
secondary mirror. In particular, multi-layer dielectric coatings, capable of
filtering out the large Night Sky Background contamination at wavelengths
$\lambda \gtrsim 700$ nm have been developed and tested, as a solution for the
primary mirrors. Due to the conformation of the ASTRI SST-2M camera, a
reimaging system based on thin pyramidal light guides could be optionally
integrated aiming to increase the fill factor. An anti-reflective coating
optimized for a wide range of incident angles faraway from normality was
specifically developed to enhance the UV-optical transparency of these
elements. The issues, strategy, simulations and experimental results are
thoroughly presented.
[19]
oai:arXiv.org:1307.5006 [pdf] - 695205
Expected performance of the ASTRI-SST-2M telescope prototype
Bigongiari, C.;
Di Pierro, F.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Arrabito, L.;
Bernlohr, K.;
Maier, G.;
Komin, N.;
Consortium, The Cta
Submitted: 2013-07-18
ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is an
Italian flagship project pursued by INAF (Istituto Nazionale di Astrofisica)
strictly linked to the development of the Cherenkov Telescope Array, CTA.
Primary goal of the ASTRI program is the design and production of an end-to-end
prototype of a Small Size Telescope for the CTA sub-array devoted to the
highest gamma-ray energy region. The prototype, named ASTRI SST-2M, will be
tested on field in Italy during 2014. This telescope will be the first
Cherenkov telescope adopting the double reflection layout in a
Schwarzschild-Couder configuration with a tessellated primary mirror and a
monolithic secondary mirror. The collected light will be focused on a compact
and light-weight camera based on silicon photo-multipliers covering a 9.6 deg
full field of view. Detailed Monte Carlo simulations have been performed to
estimate the performance of the planned telescope. The results regarding its
energy threshold, sensitivity and angular resolution are shown and discussed.
[20]
oai:arXiv.org:1307.4851 [pdf] - 1941897
The ASTRI SST-2M Prototype: Structure and Mirror
Canestrari, Rodolfo;
Catalano, Osvaldo;
Fiorini, Mauro;
Giro, Enrico;
La Palombara, Nicola;
Pareschi, Giovanni;
Stringhetti, Luca;
Tosti, Gino;
Vercellone, Stefano;
Martelli, Francesco;
Parodi, Giancarlo;
Rossettini, Pierfrancesco;
Tomelleri, Raffaele
Submitted: 2013-07-18
The next generation of IACT (Imaging Atmospheric Cherenkov Telescope) will
explore the uppermost end of the VHE (Very High Energy) domain up to about few
hundreds of TeV with unprecedented sensibility, angular resolution and imaging
quality. To this end, INAF (Italian National Institute of Astrophysics) is
currently developing a scientific and technological telescope prototype for the
implementation of the CTA (Cherenkov Telescope Array) observatory. ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana) foresees the full
design, development, installation and calibration of a Small Size 4 meter class
Telescope. The telescope, named SST-2M, is based on an aplanatic, wide field,
double reflection optical layout in a Schwarzschild-Couder configuration. In
this paper we report about the technological solutions adopted for the
telescope and for the mirrors. In particular the structural and
electro-mechanical design of the telescope and the results on the optical
performance derived after the development of a prototype of the segments that
will be assembled to form the primary mirror.
[21]
oai:arXiv.org:1307.4962 [pdf] - 1943149
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Pareschi, G.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.;
Amans, J. P.;
Boisson, C.;
Costille, C.;
Dournaux, J. L.;
Dumas, D.;
Fasola, G.;
Hervet, O.;
Huet, J. M.;
Laporte, P.;
Rulten, C.;
Sol, H.;
Zech, A.;
White, R.;
Hinton, J.;
Ross, D.;
Sykes, J.;
Ohm, S.;
Schmoll, J.;
Chadwick, P.;
Greenshaw, T.;
Daniel, M.;
Cotter, G.;
Varner, G. S.;
Funk, S.;
Vandenbroucke, J.;
Sapozhnikov, L.;
Buckley, J.;
Moore, P.;
Williams, D.;
Markoff, S.;
Vink, J.;
Berge, D.;
Hidaka, N.;
Okumura, A.;
Tajima, H.
Submitted: 2013-07-18
In this paper, the development of the dual mirror Small Size Telescopes (SST)
for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a
primary mirror diameter of 4 m, will be produced and installed at the CTA
southern site. These will allow investigation of the gamma-ray sky at the
highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV.
The telescope presented in this contribution is characterized by two major
innovations: the use of a dual mirror Schwarzschild-Couder configuration and of
an innovative camera using as sensors either multi-anode photomultipliers
(MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the
telescope, achieved with the dual-mirror optics, allows the camera to be
compact (40 cm in diameter), and low-cost. The camera, which has about 2000
pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror
telescopes and their cameras are being developed by three consortia, ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE
(Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High
Energy Camera, universities in UK, US and Japan) which are merging their
efforts in order to finalize an end-to-end design that will be constructed for
CTA. A number of prototype structures and cameras are being developed in order
to investigate various alternative designs. In this contribution, these designs
are presented, along with the technological solutions under study.
[22]
oai:arXiv.org:1307.4563 [pdf] - 1943147
Mirror Development for the Cherenkov Telescope Array
Förster, A.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
De Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
MANDAT, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pareschi, G.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
Van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-07-17
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high
energy gamma-ray astronomy. It will consist of several tens of telescopes of
different sizes, with a total mirror area of up to 10,000 square meters. Most
mirrors of current installations are either polished glass mirrors or
diamond-turned aluminium mirrors, both labour intensive technologies. For CTA,
several new technologies for a fast and cost-efficient production of
light-weight and reliable mirror substrates have been developed and industrial
pre-production has started for most of them. In addition, new or improved
aluminium-based and dielectric surface coatings have been developed to increase
the reflectance over the lifetime of the mirrors compared to those of current
Cherenkov telescope instruments.
[23]
oai:arXiv.org:1307.3992 [pdf] - 692792
Towards the ASTRI mini-array
Di Pierro, F.;
Bigongiari, C.;
Morello, C.;
Stamerra, A.;
Vallania, P.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Misto, A.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vercellone, S.;
Zitelli, V.;
Consortium, The Cta
Submitted: 2013-07-15
The Cherenkov Telescope Array (CTA) will consist of an array of three types
of telescopes covering a wide energy range, from tens of GeV up to more than
100 TeV. The high energy section (> 3 TeV) will be covered by the Small Size
Telescopes (SST). ASTRI (Astrofisica con Specchi a Tecnologia Replicante
Italiana) is a flagship project of the Italian Ministry of Research and
Education led by INAF, aiming at the design and construction of a prototype of
the Dual Mirror SST. In a second phase the ASTRI project foresees the
installation of the first elements of the SST array at the CTA southern site, a
mini-array of 5-7 telescopes. The optimization of the layout of this mini-array
embedded in the SST array of the CTA Observatory has been the object of an
intense simulation effort. In this work we present the expected mini-array
performance in terms of energy threshold, angular and energy resolution and
sensitivity.
[24]
oai:arXiv.org:1304.6559 [pdf] - 664149
The ASTRI Project: a mini-array of dual-mirror small Cherenkov
telescopes for CTA
La Palombara, N.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
Mistó, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Pareschi, G.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.
Submitted: 2013-04-24, last modified: 2013-05-15
ASTRI is a flagship project of the Italian Ministry of Education, University
and Research, which aims to develop an end-to-end prototype of the CTA
small-size telescope. The proposed design is characterized by a dual-mirror
Schwarzschild-Couder configuration and a camera based on Silicon
photo-multipliers, two challenging but innovative technological solutions which
will be adopted for the first time on a Cherenkov telescope. Here we describe
the current status of the project, the expected performance and the possibility
to realize a mini-array composed by a few small-size telescopes, which shall be
placed at the final CTA Southern Site.
[25]
oai:arXiv.org:1301.2974 [pdf] - 647875
X-ray scattering of periodic and graded multilayers: comparison of
experiments to simulations from surface microroughness characterization
Submitted: 2013-01-14, last modified: 2013-04-04
To enhance the reflectivity of X-ray mirrors beyond the critical angle,
multilayer coatings are required. Interface imperfections in the multilayer
growth process are known to cause non-specular scattering and degrade the
mirror optical performance; therefore, it is important to predict the amount of
X-ray scattering from the rough topography of the outer surface of the coating,
which can be directly measured, e.g., with an Atomic Force Microscope (AFM).
This kind of characterization, combined with X-ray reflectivity measurements to
assess the deep multilayer stack structure, can be used to model the layer
roughening during the growth process via a well-known roughness evolution
model. In this work, X-ray scattering measurements are performed and compared
with simulations obtained from the modeled interfacial Power Spectral Densities
(PSDs) and the modeled Crossed Spectral Densities for all the couples of
interfaces. We already used this approach in a previous work for periodic
multilayers; we now show how this method can be extended to graded multilayers.
The upgraded code is validated for both periodic and graded multilayers, with a
good accord between experimental data and model findings. Doing this, different
kind of defects observed in AFM scans are included in the PSD analysis. The
subsequent data-model comparison enables us to recognize them as surface
contamination or interfacial defects that contribute to the X-ray scattering of
the multilayer.
[26]
oai:arXiv.org:1303.2024 [pdf] - 1941862
The ASTRI Project: prototype status and future plans for a Cherenkov
dual-mirror small-telescope array
Vercellone, S.;
Catalano, O.;
Maccarone, M. C.;
Di Pierro, F.;
Vallania, P.;
Bonnoli, G.;
Canestrari, R.;
Pareschi, G.;
Caraveo, P.;
La Palombara, N.;
Fiorini, M.;
Stringhetti, L.;
Giro, E.;
Tosti, G.
Submitted: 2013-03-08, last modified: 2013-04-02
ASTRI ("Astrofisica con Specchi a Tecnologia Replicante Italiana") is a
flagship project of the Italian Ministry of Education, University and Research.
Within this framework, INAF is currently developing a wide field of view (9.6
degrees in diameter) end-to-end prototype of the CTA small-size telescope
(SST), devoted to the investigation of the energy range from a fraction of TeV
up to tens of TeVs, and scheduled to start data acquisition in 2014. For the
first time, a dual-mirror Schwarzschild-Couder optical design will be adopted
on a Cherenkov telescope, in order to obtain a compact optical configuration. A
second challenging, but innovative technical solution consists of a modular
focal surface camera based on Silicon photo-multipliers with a logical pixel
size of 6.2mm x 6.2mm. Here we describe the current status of the project, the
expected performance, and its possible evolution in terms of an SST mini-array.
This CTA-SST precursor, composed of a few SSTs and developed in collaboration
with CTA international partners, could not only peruse the technological
solutions adopted by ASTRI, but also address a few scientific test cases that
are discussed in detail.
[27]
oai:arXiv.org:1211.3577 [pdf] - 1579436
Cold-shaping of thin glass foils as novel method for mirrors processing.
From the basic concepts to mass production of mirrors
Submitted: 2012-11-15
We present a method for the production of segmented optics. It is a novel
processing developed at INAF-Osservatorio Astronomico di Brera (INAF-OAB)
employing commercial of-the-shelf materials. It is based on the shaping of thin
glass foils by means of forced bending, this occurring at room temperature
(cold-shaping). The glass is then assembled into a sandwich structure for
retaining the imposed shape. The principal mechanical features of the mirrors
are the very low weight, rigidity and environmental robustness. The cost and
production time also turns to be very competitive. In this paper we sum up the
results achieved during the r&d performed in the past years. We have
investigated the theoretical limits of the structural components by means of
parametric finite elements analyses; we also discuss the effects caused by the
most common structural loads. Finally, the process implementation, the more
significant validation tests and the mass production at the industry is
described.
[28]
oai:arXiv.org:0801.2350 [pdf] - 9028
Estimation of X-ray scattering impact in imaging degradation for the
SIMBOL-X telescope
Submitted: 2008-01-15
The imaging performance of X-ray optics (expressed in terms of HEW,
Half-Energy-Width) can be severely affected by X-ray scattering caused by the
surface roughness of the mirrors. The impact of X-ray scattering has an
increasing relevance for increasing photon energy, and can be the dominant
problem in a hard X-ray telescope like SIMBOL-X. In this work we show how, by
means of a novel formalism, we can derive a surface roughness tolerance - in
terms of its power spectrum - from a specific HEW requirement for the SIMBOL-X
optical module.
[29]
oai:arXiv.org:astro-ph/0609573 [pdf] - 85165
An X-ray polarimeter for hard X-ray optics
Muleri, Fabio;
Bellazzini, Ronaldo;
Costa, Enrico;
Soffitta, Paolo;
Lazzarotto, Francesco;
Feroci, Marco;
Pacciani, Luigi;
Rubini, Alda;
Morelli, Ennio;
Baldini, Luca;
Bitti, Francesco;
Brez, Alessandro;
Cavalca, Francesco;
Latronico, Luca;
Massai, Marco Maria;
Omodei, Nicola;
Pinchera, Michele;
Sgro', Carmelo;
Spandre, Gloria;
Matt, Giorgio;
Perola, Giuseppe Cesare;
Citterio, Oberto;
Pareschi, Giovanni;
Cotroneo, Vincenzo;
Spiga, Daniele;
Canestrari, Rodolfo
Submitted: 2006-09-20
Development of multi-layer optics makes feasible the use of X-ray telescope
at energy up to 60-80 keV: in this paper we discuss the extension of
photoelectric polarimeter based on Micro Pattern Gas Chamber to high energy
X-rays. We calculated the sensitivity with Neon and Argon based mixtures at
high pressure with thick absorption gap: placing the MPGC at focus of a next
generation multi-layer optics, galatic and extragalactic X-ray polarimetry can
be done up till 30 keV.
