The Helioseismic and Magnetic Imager (HMI) instrument is a major component of NASA's Solar Dynamics Observatory (SDO) spacecraft. Since beginning normal science operations on 1 May 2010, HMI has operated with remarkable continuity, e.g. during the more than five years of the SDO prime mission that ended 30 September 2015, HMI collected 98.4% of all possible 45-second velocity maps; minimizing gaps in these full-disk Dopplergrams is crucial for helioseismology. HMI velocity, intensity, and magnetic-field measurements are used in numerous investigations, so understanding the quality of the data is important. We describe the calibration measurements used to track HMI performance and detail trends in important instrument parameters during the mission. Regular calibration sequences provide information used to improve and update the HMI data calibration. The set-point temperature of the instrument front window and optical bench is adjusted regularly to maintain instrument focus, and changes in the temperature-control scheme have been made to improve stability in the observable quantities. The exposure time has been changed to compensate for a 15% decrease in instrument throughput. Measurements of the performance of the shutter and tuning mechanisms show that they are aging as expected and continue to perform according to specification. Parameters of the tunable-optical-filter elements are regularly adjusted to account for drifts in the central wavelength. Frequent measurements of changing CCD-camera characteristics, such as gain and flat field, are used to calibrate the observations. Infrequent expected events, such as eclipses, transits, and spacecraft off-points, interrupt regular instrument operations and provide the opportunity to perform additional calibration. Onboard instrument anomalies are rare and seem to occur quite uniformly in time. The instrument continues to perform very well.

The Sun's internal rotation {\Omega}(r,{\Theta}) has previously been measured using helioseismology techniques and found to be a complex function of co-latitude, {\theta}, and radius, r. From helioseismology and observations of apparently "rooted" solar magnetic tracers we know that the surface rotates more slowly than much of the interior. The cause of this slow-down is not understood but it is important for understanding stellar rotation generally and any plausible theory of the solar interior. A new analysis using 5-min solar p-mode limb oscillations as a rotation "tracer" finds an even larger velocity gradient in a thin region at the top of the photosphere. This shear occurs where the solar atmosphere radiates energy and angular momentum. We suggest that the net effect of the photospheric angular momentum loss is similar to Poynting-Robertson "photon braking" on, for example, Sun-orbiting dust. The resultant photospheric torque is readily computed and, over the Sun's lifetime, is found to be comparable to the apparent angular momentum deficit in the near-surface shear layer.

NASA's Solar Dynamics Observatory (SDO) was launched 11 February 2010 with 3 instruments on board, including the Helioseismic and Magnetic Imager (HMI). Since beginning normal operations on 1 May 2010, HMI has observed the Sun's entire visible disk almost continuously. HMI collects sequences of polarized filtergrams taken at a fixed cadence with two 4096 x 4096 cameras from which are computed arcsecond-resolution maps of photospheric observables: the line-of-sight (LoS) velocity and magnetic field, continuum intensity, line width, line depth, and the Stokes polarization parameters, I Q U V, at 6 wavelengths. Two processing pipelines implemented at the SDO Joint Science Operations Center (JSOC) at Stanford University compute observables from calibrated Level-1 filtergrams. One generates LoS quantities every 45s, and the other, primarily for the vector magnetic field, computes averages on a 720s cadence. Corrections are made for static and temporally changing CCD characteristics, bad pixels, image alignment and distortion, polarization irregularities, filter-element uncertainty and non-uniformity, as well as Sun-spacecraft velocity. This report explains issues affecting the resulting physical quantities, describes the impact of regular updates to the instrument calibration, and shows how the computations are optimized for actual HMI observations. During the 5 years of the SDO prime mission, regular calibration sequences have been used to regularly improve and update the instrument calibration and to monitor instrument changes. The instrument more than satisfies the original specifications for data quality and continuity. The procedures described here still have significant room for improvement. The most significant remaining systematic errors are associated with the spacecraft orbital velocity.

Analysis of solar radius measurements acquired by the Michelson Doppler Imager on the SOHO spacecraft supports previously reported evidence of solar internal r-mode oscillations in Mt Wilson radius data and in nuclear-decay data acquired at the Lomonosov Moscow State University. The frequencies of these oscillations are compatible with oscillations in a putative inner tachocline that separates a slowly rotating core from the radiative envelope.

The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332-1358, 1389-1407 and 2783-2834 Angstrom including bright spectral lines formed in the chromosphere (Mg II h 2803 Angstrom and Mg II k 2796 Angstrom) and transition region (C II 1334/1335 Angstrom and Si IV 1394/1403 Angstrom). Slit-jaw images in four different passbands (C II 1330, Si IV 1400, Mg II k 2796 and Mg II wing 2830 Angstrom) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec x 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.

The Michelson Doppler Imager (MDI) aboard the Solar and Heliospheric Observatory observed the transits of Mercury on 2003 May 7 and 2006 November 8. Contact times between Mercury and the solar limb have been used since the 17th century to derive the Sun's size but this is the first time that high-quality imagery from space, above the Earth's atmosphere, has been available. Unlike other measurements this technique is largely independent of optical distortion. The true solar radius is still a matter of debate in the literature as measured differences of several tenths of an arcsecond (i.e., about 500 km) are apparent. This is due mainly to systematic errors from different instruments and observers since the claimed uncertainties for a single instrument are typically an order of magnitude smaller. From the MDI transit data we find the solar radius to be 960".12 +/- 0".09 (696,342 +/- 65 km). This value is consistent between the transits and consistent between different MDI focus settings after accounting for systematic effects.

We investigate the accuracy to which we can retrieve the solar photospheric magnetic field vector using the Helioseismic and Magnetic Imager (HMI) that will fly onboard of the Solar Dynamics Observatory (SDO) by inverting simulated HMI profiles. The simulated profiles realistically take into account the effects of the photon noise, limited spectral resolution, instrumental polarization modulation, solar p modes and temporal averaging. The accuracy of the determination of the magnetic field vector is studied considering the different operational modes of the instrument.

We present a study of two spectral lines, Fe I 6173 Angstroms and Ni I 6768 Angstroms, that were candidates to be used in the Helioseismic and Magnetic Imager (HMI) for observing Doppler velocity and the vector magnetic field. The line profiles were studied using the Mt. Wilson Observatory, the Advanced Stokes Polarimeter and the Kitt Peak McMath telescope and one meter Fourier transform spectrometer atlas. Both Fe I and Ni I profiles have clean continua and no blends that threaten instrument performance. The Fe I line is 2% deeper, 15% narrower and has a 6% smaller equivalent width than the Ni I line. The potential of each spectral line to recover pre-assigned solar conditions is tested using a least-squares minimization technique to fit Milne-Eddington models to tens of thousands of line profiles that have been sampled at five spectral positions across the line. Overall, the Fe I line has a better performance than the Ni I line for vector magnetic field retrieval. We selected the Fe I spectral line for use in HMI due to its better performance for magnetic diagnostics while not sacrificing velocity information.

The Helioseismic and Magnetic Imager (HMI), on board the Solar Dynamics Observatory (SDO), will begin data acquisition in 2008. It will provide the first full disk, high temporal cadence observations of the full Stokes vector with a 0.5 arc sec pixel size. This will allow for a continuous monitoring of the Solar magnetic field vector. HMI data will advance our understanding of the small and large-scale magnetic field evolution, its relation to the solar and global dynamic processes, coronal field extrapolations, flux emergence, magnetic helicity and the nature of the polar magnetic fields. We summarize HMI's expected operation modes, focusing on the polarization cross-talk induced by the solar oscillations and how this affects the magnetic field vector determinations.

We report on the spatial distribution of magnetogram oscillatory power and phase angles between velocity and magnetogram signals as observed with the Michelson Doppler Imager. The dataset is 151.25 arcsec times 151.25 arcsec containing sunspot from Dec 2, 1997 with a temporal sampling interval of 60 seconds and spatial sampling of 0.605 arcsec. Simultaneously observed continuum intensity and surface velocity accompany the magnetic information. We focus on three frequency regimes: 0.5-1.0, 3.0-3.5 and 5.5-6.0 mHz corresponding roughly to timescales of magnetic evolution, p-modes and the 3 minute resonant sunspot oscillation. Significant low frequency magnetogram power is found in lower flux pixels, 100-300 Gauss, in a striking ring with filamentary structure surrounding sunspot. Five minute magnetogram power peaks in extended regions of flux 600-800 Gauss. The 3 minute oscillation is observed in sunspot umbra in pixels whose flux measures 1300-1500 Gauss. Phase angles of approximately -90 degrees between velocity and magnetic flux in the 3.0-3.5 and 5.5-6.0 mHz regimes are found in regions of significant cross amplitude.