In this paper we present the differential emission measures (DEMs) of two sub-A class microflares observed in hard X-rays (HXRs) by the FOXSI-2 sounding rocket experiment, on 2014 December 11. The second FOXSI (Focusing Optics X-ray Solar Imager) flight was coordinated with instruments Hinode/XRT and SDO/AIA, which provided observations in soft X-rays (SXR) and Extreme Ultraviolet (EUV). This unique dataset offers an unprecedented temperature coverage useful for characterizing the plasma temperature distribution of microflares. By combining data from FOXSI-2, XRT, and AIA, we determined a well-constrained DEM for the microflares. The resulting DEMs peak around 3MK and extend beyond 10MK. The emission measures determined from FOXSI-2 were lower than 10 26cm-5 for temperatures higher than 5MK; faint emission in this range is best measured in HXRs. The coordinated FOXSI-2 observations produce one of the few definitive measurements of the distribution and the amount of plasma above 5MK in microflares. We utilize the multi-thermal DEMs to calculate the amount of thermal energy released during both the microflares as ~ 5.0 x 10 28 ergs for Microflare 1 and ~ 1.6 x 10 28 ergs for Microflare 2. We also show the multi-thermal DEMs provide a more comprehensive thermal energy estimates than isothermal approximation, which systematically underestimates the amount of thermal energy released.

We compare magnetic field measurements taken by the FIELDS instrument on Parker Solar Probe (PSP) during its first solar encounter to predictions obtained by Potential Field Source Surface (PFSS) modeling. Ballistic propagation is used to connect the spacecraft to the source surface. Despite the simplicity of the model, our results show striking agreement with PSPs first observations of the heliospheric magnetic field from 0.5 AU (107.5 Rs) down to 0.16 AU (35.7 Rs). Further, we show the robustness of the agreement is improved both by allowing the photospheric input to the model to vary in time, and by advecting the field from PSP down to the PFSS model domain using in situ PSP/SWEAP measurements of the solar wind speed instead of assuming it to be constant with longitude and latitude. We also explore the source surface height parameter (RSS) to the PFSS model finding that an extraordinarily low source surface height (1.3-1.5Rs) predicts observed small scale polarity inversions which are otherwise washed out with regular modeling parameters. Finally, we extract field line traces from these models. By overlaying these on EUV images we observe magnetic connectivity to various equatorial and mid-latitude coronal holes indicating plausible magnetic footpoints and offering context for future discussions of sources of the solar wind measured by PSP.

We have developed a fine-pitch hard X-ray (HXR) detector using a cadmium telluride (CdTe) semiconductor for imaging and spectroscopy for the second launch of the Focusing Optics Solar X-ray Imager (FOXSI). FOXSI is a rocket experiment to perform high sensitivity HXR observations from 4-15 keV using the new technique of HXR focusing optics. The focal plane detector requires < 100 um position resolution (to take advantage of the angular resolution of the optics) and about 1 keV energy resolution (FWHM) for spectroscopy down to 4 keV, with moderate cooling (> -30 C). Double-sided silicon strip detectors were used for the first FOXSI flight in 2012 to meet these criteria. To improve the detectors' efficiency (66 at 15 keV for the silicon detectors) and position resolution of 75 um for the second launch, we fabricated double-sided CdTe strip detectors with a position resolution of 60 um and almost 100 % efficiency for the FOXSI energy range. The sensitive area is 7.67 mm x 7.67 mm, corresponding to the field of view of 791'' x 791''. An energy resolution of about 1 keV (FWHM) and low energy threshold of 4 keV were achieved in laboratory calibrations. The second launch of FOXSI was performed on December 11, 2014, and images from the Sun were successfully obtained with the CdTe detector. Therefore we successfully demonstrated the detector concept and the usefulness of this technique for future HXR observations of the Sun.

Several mechanisms have been proposed to explain the transient seis- mic emission, i.e., sunquakes, from some solar flares. Some theories associate high-energy electrons and/or white-light emission with sunquakes. High-energy charged particles and their subsequent heating of the photosphere and/or chro- mosphere could induce acoustic waves in the solar interior. We carried out a correlative study of solar flares with emission in hard-X rays (HXRs), enhanced continuum emission at 6173{\AA}, and transient seismic emission. We selected those flares observed by RHESSI (Reuven Ramaty High Energy Solar Spectroscopic Imager) with a considerable flux above 50 keV between January 1, 2010 and June 26, 2014. We then used data from the Helioseismic and Magnetic Imager onboard the Solar Dynamic Observatory (SDO/HMI) to search for excess visible continuum emission and new sunquakes not previously reported. We found a total of 18 sunquakes out of 75 investigated. All of the sunquakes were associated with a enhancement of the visible continuum during the flare time. Finally, we calculated a coefficient of correlation for a set of dichotomic variables related to these observations. We found a strong correlation between two of the standard helioseismic detection techniques, and between sunquakes and visible continuum enhancements. We discuss the phenomenological connectivity between these physical quantities and the observational difficulties of detecting seismic signals and excess continuum radiation.

Multi--wavelength studies of energetic solar flares with seismic emissions have revealed interesting common features between them. We studied the first GOES X--class flare of the 24th solar cycle, as detected by the Solar Dynamics Observatory (SDO). For context, seismic activity from this flare (SOL2011-02-15T01:55-X2.2, in NOAA AR 11158) has been reported in the literature (Kosovichev, 2011; Zharkov et al., 2011). Based on Dopplergram data from the Helioseismic and Magnetic Imager (HMI), we applied standard methods of local helioseismology in order to identify the seismic sources in this event. RHESSI hard X-ray data are used to check the correlation between the location of the seismic sources and the particle precipitation sites in during the flare. Using HMI magnetogram data, the temporal profile of fluctuations in the photospheric line-of-sight magnetic field is used to estimate the magnetic field change in the region where the seismic signal was observed. This leads to an estimate of the work done by the Lorentz-force transient on the photosphere of the source region. In this instance this is found to be a significant fraction of the acoustic energy in the attendant seismic emission, suggesting that Lorentz forces can contribute significantly to the generation of sunquakes. However, there are regions in which the signature of the Lorentz-force is much stronger, but from which no significant acoustic emission emanates.