Stellar interiors are the seat of efficient transport of angular momentum all along with their evolution. Understanding the dependence of the turbulent transport triggered by the shear instabilities due to the differential rotation in stellar radiation zones is mandatory. Indeed, it constitutes one of the cornerstones of the rotational transport and mixing theory which is implemented in stellar evolution codes to predict the rotational and chemical evolutions of stars. We investigate horizontal shear instabilities in stellar radiation zones by considering the full Coriolis acceleration with both the dimensionless horizontal component $\tilde{f}$ and the vertical component $f$. We performed a linear stability analysis for a horizontal shear flow with a hyperbolic tangent profile, both numerically and asymptotically using the WKBJ approximation. As in the traditional approximation, we identified the inflectional and inertial instabilities. The inflectional instability is destabilized as $\tilde{f}$ increases and its maximum growth rate increases significantly, while the thermal diffusivity stabilizes the inflectional instability similarly to the traditional case. The inertial instability is also strongly affected; for instance, the inertially unstable regime is extended in the non-diffusive limit as $0<f<1+\tilde{f}^{2}/N^{2}$, where $N$ is the dimensionless Brunt-V\"ais\"al\"a frequency. More strikingly, in the high-thermal-diffusivity limit, it is always inertially unstable at any colatitude $\theta$ except at the poles (i.e., $0^{\circ}<\theta<180^{\circ}$). Using the asymptotic and numerical results, we propose a prescription for the effective turbulent viscosities induced by the instabilities to be possibly used in stellar evolution models. The characteristic time of this turbulence is short enough to redistribute efficiently angular momentum and mix chemicals in the radiation zones.

Since the onset of the `space revolution' of high-precision high-cadence photometry, asteroseismology has been demonstrated as a powerful tool for informing Galactic archaeology investigations. The launch of the NASA TESS mission has enabled seismic-based inferences to go full sky -- providing a clear advantage for large ensemble studies of the different Milky Way components. Here we demonstrate its potential for investigating the Galaxy by carrying out the first asteroseismic ensemble study of red giant stars observed by TESS. We use a sample of 25 stars for which we measure their global asteroseimic observables and estimate their fundamental stellar properties, such as radius, mass, and age. Significant improvements are seen in the uncertainties of our estimates when combining seismic observables from TESS with astrometric measurements from the Gaia mission compared to when the seismology and astrometry are applied separately. Specifically, when combined we show that stellar radii can be determined to a precision of a few percent, masses to 5-10% and ages to the 20% level. This is comparable to the precision typically obtained using end-of-mission Kepler data

Over the course of its history, the Milky Way has ingested multiple smaller satellite galaxies. While these accreted stellar populations can be forensically identified as kinematically distinct structures within the Galaxy, it is difficult in general to precisely date the age at which any one merger occurred. Recent results have revealed a population of stars that were accreted via the collision of a dwarf galaxy, called \textit{Gaia}-Enceladus, leading to a substantial pollution of the chemical and dynamical properties of the Milky Way. Here, we identify the very bright, naked-eye star $\nu$\,Indi as a probe of the age of the early in situ population of the Galaxy. We combine asteroseismic, spectroscopic, astrometric, and kinematic observations to show that this metal-poor, alpha-element-rich star was an indigenous member of the halo, and we measure its age to be $11.0 \pm 0.7$ (stat) $\pm 0.8$ (sys)$\,\rm Gyr$. The star bears hallmarks consistent with it having been kinematically heated by the \textit{Gaia}-Enceladus collision. Its age implies that the earliest the merger could have begun was 11.6 and 13.2 Gyr ago at 68 and 95% confidence, respectively. Input from computations based on hierarchical cosmological models tightens (i.e. reduces) slightly the above limits.

Brightness variations due to dark spots on the stellar surface encode information about stellar surface rotation and magnetic activity. In this work, we analyze the Kepler long-cadence data of 26,521 main-sequence stars of spectral types M and K in order to measure their surface rotation and photometric activity level. Rotation-period estimates are obtained by the combination of a wavelet analysis and autocorrelation function of the light curves. Reliable rotation estimates are determined by comparing the results from the different rotation diagnostics and four data sets. We also measure the photometric activity proxy Sph using the amplitude of the flux variations on an appropriate timescale. We report rotation periods and photometric activity proxies for about 60 per cent of the sample, including 4,431 targets for which McQuillan et al. (2013a,2014) did not report a rotation period. For the common targets with rotation estimates in this study and in McQuillan et al. (2013a,2014), our rotation periods agree within 99 per cent. In this work, we also identify potential polluters, such as misclassified red giants and classical pulsator candidates. Within the parameter range we study, there is a mild tendency for hotter stars to have shorter rotation periods. The photometric activity proxy spans a wider range of values with increasing effective temperature. The rotation period and photometric activity proxy are also related, with Sph being larger for fast rotators. Similar to McQuillan et al. (2013a,2014), we find a bimodal distribution of rotation periods.

Over 2,000 stars were observed for one month with a high enough cadence in order to look for acoustic modes during the survey phase of the Kepler mission. Solar-like oscillations have been detected in about 540 stars. The question of why no oscillations were detected in the remaining stars is still open. Previous works explained the non-detection of modes with the high level of magnetic activity. However, the studied stars contained some classical pulsators and red giants that could have biased the results. In this work, we revisit this analysis on a cleaner sample of 1,014 main-sequence solar-like stars. First we compute the predicted amplitude of the modes. We find that the stars with detected modes have an amplitude to noise ratio larger than 0.94. We measure reliable rotation periods and the associated photometric magnetic index for 684 stars and in particular for 323 stars where the mode amplitude is predicted to be high enough to be detected. We find that among these 323 stars 32% have a magnetic activity level larger than the Sun at maximum activity, explaining the non-detection of p modes. Interestingly, magnetic activity cannot be the primary reason responsible for the absence of detectable modes in the remaining 68% of the stars without p modes detected and with reliable rotation periods. Thus, we investigate metallicity, inclination angle, and binarity as possible causes of low mode amplitudes. Using spectroscopic observations for a subsample, we find that a low metallicity could be the reason for suppressed modes. No clear correlation with binarity nor inclination is found. We also derive the lower limit for our photometric activity index (of 20-30 ppm) below which rotation and magnetic activity are not detected. Finally with our analysis we conclude that stars with a photometric activity index larger than 2,000 ppm have 98.3% probability of not having oscillations detected.

The second mission of the NASA Kepler satellite, K2, has collected hundreds of thousands of lightcurves for stars close to the ecliptic plane. This new sample could increase the number of known pulsating stars and then improve our understanding of those stars. For the moment only a few stars have been properly classified and published. In this work, we present a method to automaticly classify K2 pulsating stars using a Machine Learning technique called Random Forest. The objective is to sort out the stars in four classes: red giant (RG), main-sequence Solar-like stars (SL), classical pulsators (PULS) and Other. To do this we use the effective temperatures and the luminosities of the stars as well as the FliPer features, that measures the amount of power contained in the power spectral density. The classifier now retrieves the right classification for more than 80% of the stars.

For a solar-like star, the surface rotation evolves with time, allowing in principle to estimate the age of a star from its surface rotation period. Here we are interested in measuring surface rotation periods of solar-like stars observed by the NASA Kepler mission. Different methods have been developed to track rotation signals in Kepler photometric light curves: time-frequency analysis based on wavelet techniques, autocorrelation and composite spectrum. We use the learning abilities of random forest classifiers to take decisions during two crucial steps of the analysis. First, given some input parameters, we discriminate the considered Kepler targets between rotating MS stars, non-rotating MS stars, red giants, binaries and pulsators. We then use a second classifier only on the MS rotating targets to decide the best data-analysis treatment.

We present the discovery of TOI-197.01, the first transiting planet identified by the Transiting Exoplanet Survey Satellite (TESS) for which asteroseismology of the host star is possible. TOI-197 (HIP116158) is a bright (V=8.2 mag), spectroscopically classified subgiant which oscillates with an average frequency of about 430 muHz and displays a clear signature of mixed modes. The oscillation amplitude confirms that the redder TESS bandpass compared to Kepler has a small effect on the oscillations, supporting the expected yield of thousands of solar-like oscillators with TESS 2-minute cadence observations. Asteroseismic modeling yields a robust determination of the host star radius (2.943+/-0.064 Rsun), mass (1.212 +/- 0.074 Msun) and age (4.9+/-1.1 Gyr), and demonstrates that it has just started ascending the red-giant branch. Combining asteroseismology with transit modeling and radial-velocity observations, we show that the planet is a "hot Saturn" (9.17+/-0.33 Rearth) with an orbital period of ~14.3 days, irradiance of 343+/-24 Fearth, moderate mass (60.5 +/- 5.7 Mearth) and density (0.431+/-0.062 gcc). The properties of TOI-197.01 show that the host-star metallicity - planet mass correlation found in sub-Saturns (4-8 Rearth) does not extend to larger radii, indicating that planets in the transition between sub-Saturns and Jupiters follow a relatively narrow range of densities. With a density measured to ~15%, TOI-197.01 is one of the best characterized Saturn-sized planets to date, augmenting the small number of known transiting planets around evolved stars and demonstrating the power of TESS to characterize exoplanets and their host stars using asteroseismology.

The NASA's Transiting Exoplanet Survey Satellite (TESS) is about to provide full-frame images of almost the entire sky. The amount of stellar data to be analysed represents hundreds of millions stars, which is several orders of magnitude above the amount of stars observed by CoRoT, Kepler, or K2 missions. We aim at automatically classifying the newly observed stars, with near real-time algorithms, to better guide their subsequent detailed studies. In this paper, we present a classification algorithm built to recognise solar-like pulsators among classical pulsators, which relies on the global amount of power contained in the PSD, also known as the FliPer (Flicker in spectral Power density). As each type of pulsating star has a characteristic background or pulsation pattern, the shape of the PSD at different frequencies can be used to characterise the type of pulsating star. The FliPer Classifier (FliPer$_{Class}$) uses different FliPer parameters along with the effective temperature as input parameters to feed a machine learning algorithm in order to automatically classify the pulsating stars observed by TESS. Using noisy TESS simulated data from the TESS Asteroseismic Science Consortium (TASC), we manage to classify pulsators with a 98% accuracy. Among them, solar-like pulsating stars are recognised with a 99% accuracy, which is of great interest for further seismic analysis of these stars like our Sun. Similar results are obtained when training our classifier and applying it to 27 days subsets of real Kepler data. FliPer$_{Class}$ is part of the large TASC classification pipeline developed by the TESS Data for Asteroseismology (T'DA) classification working group.

The recently published Kepler mission Data Release 25 (DR25) reported on ~197,000 targets observed during the mission. Despite this, no wide search for red giants showing solar-like oscillations have been made across all stars observed in Kepler's long-cadence mode. In this work, we perform this task using custom apertures on the Kepler pixel files and detect oscillations in 21,914 stars, representing the largest sample of solar-like oscillating stars to date. We measure their frequency at maximum power, $\nu_{\mathrm{max}}$, down to $\nu_{\mathrm{max}}\simeq4\mu$Hz and obtain $\log(g)$ estimates with a typical uncertainty below 0.05 dex, which is superior to typical measurements from spectroscopy. Additionally, the $\nu_{\mathrm{max}}$ distribution of our detections show good agreement with results from a simulated model of the Milky Way, with a ratio of observed to predicted stars of 0.992 for stars with 10$\mu$Hz $ <\nu_{\mathrm{max}}<270\mu$Hz. Among our red giant detections, we find 909 to be dwarf/subgiant stars whose flux signal is polluted by a neighbouring giant as a result of using larger photometric apertures than those used by the NASA Kepler Science Processing Pipeline. We further find that only 293 of the polluting giants are known Kepler targets. The remainder comprises over 600 newly identified oscillating red giants, with many expected to belong to the galactic halo, serendipitously falling within the Kepler pixel files of targeted stars.

The recently launched NASA Transiting Exoplanet Survey Satellite (TESS) mission is going to collect lightcurves for a few hundred million of stars and we expect to increase the number of pulsating stars to analyze compared to the few thousand stars observed by the CoRoT, $\textit{Kepler}$ and K2 missions. However, most of the TESS targets have not yet been properly classified and characterized. In order to improve the analysis of the TESS data, it is crucial to determine the type of stellar pulsations in a timely manner. We propose an automatic method to classify stars attending to their pulsation properties, in particular, to identify solar-like pulsators among all TESS targets. It relies on the use of the global amount of power contained in the power spectrum (already known as the FliPer method) as a key parameter, along with the effective temperature, to feed into a machine learning classifier. Our study, based on TESS simulated datasets, shows that we are able to classify pulsators with a $98\%$ accuracy.

We report on the confirmation and mass determination of Pi Men c, the first transiting planet discovered by NASA's TESS space mission. Pi Men is a naked-eye (V=5.65 mag), quiet G0 V star that was previously known to host a sub-stellar companion (Pi Men b) on a long-period (Porb = 2091 days), eccentric (e = 0.64) orbit. Using TESS time-series photometry, combined with Gaia data, published UCLES@AAT Doppler measurements, and archival HARPS@ESO-3.6m radial velocities, we found that Pi Men c is a close-in planet with an orbital period of Porb = 6.27 days, a mass of Mc = 4.52 +/- 0.81 MEarth, and a radius of Rc = 2.06 +/- 0.03 REarth. Based on the planet's orbital period and size, Pi Men c is a super-Earth located at, or close to, the radius gap, while its mass and bulk density suggest it may have held on to a significant atmosphere. Because of the brightness of the host star, this system is highly suitable for a wide range of further studies to characterize the planetary atmosphere and dynamical properties. We also performed an asteroseismic analysis of the TESS data and detected a hint of power excess consistent with the seismic values expected for this star, although this result depends on the photometric aperture used to extract the light curve. This marginal detection is expected from pre-launch simulations hinting at the asteroseismic potential of the TESS mission for longer, multi-sector observations and/or for more evolved bright stars.

Asteroseismology provides global stellar parameters such as masses, radii or surface gravities using the mean global seismic parameters as well as the effective temperature for thousands of low-mass stars $(0.8 M_\odot <M<3 M_\odot)$. This methodology has been successfully applied to stars in which acoustic modes excited by turbulent convection are measured. Other techniques such as the Flicker can also be used to determine stellar surface gravities, but only works for $\log{g}$ above $2.5$ dex. In this work, we present a new metric called FliPer (the acronym stands for Flicker in spectral power density, in opposition to the standard Flicker measurement which is computed in the time domain that is able to extend the range for which reliable surface gravities can be obtained ($0.1<\log{g}<4.6$ dex) without performing any seismic analysis for stars brighter than $\textit{Kp}$ $<$ 14. FliPer takes into account the average variability of a star measured in the power density spectrum in a given range of frequencies. However, FliPer values calculated on several ranges of frequency are required to better characterize a star. Using a large set of asteroseismic targets it is possible to calibrate the behavior of surface gravity with FliPer through machine learning. This calibration made with a random forest regressor covers a wide range of surface gravities from main-sequence stars to subgiants and red giants, with very small uncertainties from $0.04$ to $0.1$ dex. FliPer values can be inserted in automatic global seismic pipelines to either give an estimation of the stellar surface gravity or to assess the quality of the seismic results by detecting any outliers in the obtained $\nu_{max}$ values. FliPer also constrain the surface gravities of main-sequence dwarfs using only long cadence data for which the Nyquist frequency is too low to measure the acoustic-mode properties.

We report the discovery and characterization of HD 89345b (K2-234b; EPIC 248777106b), a Saturn-sized planet orbiting a slightly evolved star. HD 89345 is a bright star ($V = 9.3$ mag) observed by the K2 mission with one-minute time sampling. It exhibits solar-like oscillations. We conducted asteroseismology to determine the parameters of the star, finding the mass and radius to be $1.12^{+0.04}_{-0.01}~M_\odot$ and $1.657^{+0.020}_{-0.004}~R_\odot$, respectively. The star appears to have recently left the main sequence, based on the inferred age, $9.4^{+0.4}_{-1.3}~\mathrm{Gyr}$, and the non-detection of mixed modes. The star hosts a "warm Saturn" ($P = 11.8$~days, $R_p = 6.86 \pm 0.14~R_\oplus$). Radial-velocity follow-up observations performed with the FIES, HARPS, and HARPS-N spectrographs show that the planet has a mass of $35.7 \pm 3.3~M_\oplus$. The data also show that the planet's orbit is eccentric ($e\approx 0.2$). An investigation of the rotational splitting of the oscillation frequencies of the star yields no conclusive evidence on the stellar inclination angle. We further obtained Rossiter-McLaughlin observations, which result in a broad posterior of the stellar obliquity. The planet seems to conform to the same patterns that have been observed for other sub-Saturns regarding planet mass and multiplicity, orbital eccentricity, and stellar metallicity.

Our understanding of stars through asteroseismic data analysis is limited by our ability to take advantage of the huge amount of observed stars provided by space missions such as CoRoT, Kepler, K2, and soon TESS and PLATO. Global seismic pipelines provide global stellar parameters such as mass and radius using the mean seismic parameters, as well as the effective temperature. These pipelines are commonly used automatically on thousands of stars observed by K2 for 3 months (and soon TESS for at least around 1 month). However, pipelines are not immune from misidentifying noise peaks and stellar oscillations. Therefore, new validation techniques are required to assess the quality of these results. We present a new metric called FliPer (Flicker in Power), which takes into account the average variability at all measured time scales. The proper calibration of FliPer enables us to obtain good estimations of global stellar parameters such as surface gravity that are robust against the influence of noise peaks and hence are an excellent way to find faults in asteroseismic pipelines.