Rotating modulation is a technique for indirect imaging in the hard x-ray and soft gamma-ray energy bands, which may offer an advantage over coded aperture imaging at high energies. A rotating modulator (RM) consists of a single mask of co-planar parallel slats typically spaced equidistance apart, suspended above an array of circular non-imaging detectors. The mask rotates, temporally modulating the transmitted image of the object scene. The measured count rate profiles of each detector are folded modulo the mask rotational period, and the object scene is reconstructed using pre-determined characteristic modulation profiles. The use of Monte Carlo simulation to derive the characteristic count rate profiles is accurate but computationally expensive; an analytic approach is preferred for its speed of computation. We present both the standard and a new advanced characteristic formula describing the modulation pattern of the RM; the latter is a more robust description of the instrument response developed as part of the design of a wide-field high-resolution telescope for gamma-ray astronomy. We examine an approximation to the advanced formula to simplify reconstruction software and increase computational speed, and comment on both the inherent limitations and usefulness of the approach. Finally, we show comparisons to the standard formula and demonstrate image reconstructions from Monte Carlo simulations.

A rotational modulator (RM) gamma-ray imager is capable of obtaining significantly better angular resolution than the fundamental geometric resolution defined by the ratio of detector diameter to mask-detector separation. An RM imager consisting of a single grid of absorbing slats rotating ahead of an array of a small number of position-insensitive detectors has the advantage of fewer detector elements (i.e., detector plane pixels) than required by a coded aperture imaging system with comparable angular resolution. The RM therefore offers the possibility of a major reduction in instrument complexity, cost, and power. A novel image reconstruction technique makes it possible to deconvolve the raw images, remove sidelobes, reduce the effects of noise, and provide resolving power a factor of 6 - 8 times better than the geometric resolution. A 19-channel prototype RM developed in our laboratory at Louisiana State University features 13.8 deg full-angle field of view, 1.9 deg geometric angular resolution, and the capability of resolving sources to within 35' separation. We describe the technique, demonstrate the measured performance of the prototype instrument, and describe the prospects for applying the technique to either a high-sensitivity standoff gamma-ray imaging detector or a satellite- or balloon-borne gamma-ray astronomy telescope.

A Rotating Modulator (RM) is one of a class of techniques for indirect imaging of an object scene by modulation and detection of incident photons. Comparison of the RM to more common imaging techniques, the Rotating Modulation Collimator and the coded aperture, reveals trade-offs in instrument weight and complexity, sensitivity, angular resolution, and image fidelity. In the case of a high-energy (hundreds of keV to MeV), wide field-of-view, satellite or balloon-borne astrophysical survey mission, the RM is shown to be an attractive option when coupled with a reconstruction algorithm that can simultaneously achieve super-resolution and suppress fluctuations arising from statistical noise. We describe the Noise-Compensating Algebraic Reconstruction (NCAR) algorithm, which is shown to perform better than traditional deconvolution techniques for most object scene distributions. Results from Monte Carlo simulations demonstrate that NCAR achieves super-resolution, can resolve multiple point sources and complex distributions, and manifests noise as fuzzy sidelobes about the true source location, rather than spurious peaks elsewhere in the image as seen with other techniques.