With 30 antennas and a maximum baseline length of 25 km, the Giant Metrewave Radio Telescope (GMRT) is the premier low-frequency radio interferometer today. We have carried out a study of possible expansions of the GMRT, via adding new antennas and installing focal plane arrays (FPAs), to improve its point-source sensitivity, surface brightness sensitivity, angular resolution, field of view, and U-V coverage. We have carried out array configuration studies, aimed at minimizing the number of new GMRT antennas required to obtain a well-behaved synthesized beam over a wide range of angular resolutions for full-synthesis observations. This was done via two approaches, tomographic projection and random sampling, to identify the optimal locations for the new antennas. We report results for the optimal locations of the antennas of an expanded array (the "EGMRT"), consisting of the existing 30 GMRT antennas, 30 new antennas at short distances, $\leq 2.5$ km from the array centre, and 26 new antennas at long distances, $\approx 5-25$ km from the array centre. The collecting area and the field of view of the proposed EGMRT array would be larger by factors of, respectively, $\approx 3$ and $\approx 30$, than those of the GMRT. Indeed, the EGMRT continuum sensitivity and survey speed with 550-850 MHz FPAs installed on the 45 antennas within a distance of $\approx 2.5$ km of the array centre would be far better than those of any existing interferometer, and comparable to the sensitivity and survey speed of Phase-1 of the Square Kilometre Array.

The Giant Metrewave Radio Telescope (GMRT) is being upgraded to increase the receiver sensitivity. This makes the receiver more susceptible to man-made Radio Frequency Interference (RFI). To improve the receiver performance in presence of RFI, real-time RFI excision (filtering) is incorporated in the GMRT wideband backend (GWB). The RFI filtering system is implemented on FPGA and CPU-GPU platforms to detect and remove broadband and narrowband RFI. The RFI is detected using a threshold-based technique where the threshold is computed using Median Absolute Deviation (MAD) estimator. The filtering is carried out by replacing the RFI samples by either noise samples or constant value or threshold. This paper describes the status of the real-time broadband RFI excision system in the wideband receiver chain of the upgraded GMRT (uGMRT). The test methodology for carrying out various tests to demonstrate the performance of broadband RFI excision at the system level and on radio astronomical imaging experiments are also described.

The Collaboration for Astronomy Signal Processing and Electronics Research (CASPER) has been working for a decade to reduce the time and cost of designing, building and deploying new digital radio-astronomy instruments. Today, CASPER open-source technology powers over 45 scientific instruments worldwide, and is used by scientists and engineers at dozens of academic institutions. In this paper we catalog the current offerings of the CASPER collaboration, and instruments past and present built by CASPER users and developers. We describe the ongoing state of software development, as CASPER looks to support a broader range of programming environments and hardware and ensure compatibility with the latest vendor tools.