MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.

CRIRES, the ESO high resolution infrared spectrometer, is a unique instrument which allows astronomers to access a parameter space which up to now was largely uncharted. In its current setup, it consists of a single-order spectrograph providing long-slit, single-order spectroscopy with resolving power up to R=100,000 over a quite narrow spectral range. This has resulted in sub-optimal efficiency and use of telescope time for all the scientific programs requiring broad spectral coverage of compact objects (e.g. chemical abundances of stars and intergalactic medium, search and characterization of extra-solar planets). To overcome these limitations, a consortium was set-up for upgrading CRIRES to a cross-dispersed spectrometer, called CRIRES+. This paper presents the updated optical design of the crossdispersion module for CRIRES+. This new module can be mounted in place of the current pre-disperser unit. The new system yields a factor of >10 increase in simultaneous spectral coverage and maintains a quite long slit (10"), ideal for observations of extended sources and for precise sky-background subtraction.

We present the latest update of the European Southern Observatory's Very Large Telescope interferometer (VLTI). The operations of VLTI have greatly improved in the past years: reduction of the execution time; better offering of telescopes configurations; improvements on AMBER limiting magnitudes; study of polarization effects and control for single mode fibres; fringe tracking real time data, etc. We present some of these improvements and also quantify the operational improvements using a performance metric. We take the opportunity of the first decade of operations to reflect on the VLTI community which is analyzed quantitatively and qualitatively. Finally, we present briefly the preparatory work for the arrival of the second generation instruments GRAVITY and MATISSE.

(Abridged) Atmospheric dispersion and field differential refraction impose severe constraints on widefield MOS observations. Flux reduction and spectral distortions must be minimised by a careful planning of the observations -- which is especially true for instruments that use slits instead of fibres. This is the case of VIMOS at the VLT, where MOS observations have been restricted, since the start of operations, to a narrow two-hour range from the meridian to minimise slit losses. We revisit in detail the impact of atmospheric effects on the quality of VIMOS-MOS spectra. We model slit losses across the entire VIMOS FOV as a function of target declination. We explore two different slit orientations at the meridian: along the parallactic angle (North-South), and perpendicular to it (East-West). We show that, for fields culminating at zenith distances larger than 20 deg, slit losses are minimised with slits oriented along the parallactic angle at the meridian. The two-hour angle rule holds for these observations using N-S orientations. Conversely, for fields with zenith angles smaller than 20 deg at culmination, losses are minimised with slits oriented perpendicular to the parallactic angle at the meridian. MOS observations can be effectively extended to plus/minus three hours from the meridian in these cases. In general, night-long observations of a single field will benefit from using the E-W orientation. All-sky or service mode observations, however, require a more elaborate planning that depends on the target declination, and the hour angle of the observations. We establish general rules for the alignment of slits in MOS observations that will increase target observability, enhance the efficiency of operations, and speed up the completion of programmes -- a particularly relevant aspect for the forthcoming spectroscopic public surveys with VIMOS.

The acronym ESPRESSO stems for Echelle SPectrograph for Rocky Exoplanets and Stable Spectroscopic Observations; this instrument will be the next VLT high resolution spectrograph. The spectrograph will be installed at the Combined-Coud\'e Laboratory of the VLT and linked to the four 8.2 m Unit Telescopes (UT) through four optical Coud\'e trains. ESPRESSO will combine efficiency and extreme spectroscopic precision. ESPRESSO is foreseen to achieve a gain of two magnitudes with respect to its predecessor HARPS, and to improve the instrumental radial-velocity precision to reach the 10 cm/s level. It can be operated either with a single UT or with up to four UTs, enabling an additional gain in the latter mode. The incoherent combination of four telescopes and the extreme precision requirements called for many innovative design solutions while ensuring the technical heritage of the successful HARPS experience. ESPRESSO will allow to explore new frontiers in most domains of astrophysics that require precision and sensitivity. The main scientific drivers are the search and characterization of rocky exoplanets in the habitable zone of quiet, nearby G to M-dwarfs and the analysis of the variability of fundamental physical constants. The project passed the final design review in May 2013 and entered the manufacturing phase. ESPRESSO will be installed at the Paranal Observatory in 2016 and its operation is planned to start by the end of the same year.

X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope(VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300 to 2500 nm. It is designed to maximize the sensitivity in this spectral range through dichroic splitting in three arms with optimized optics, coatings, dispersive elements and detectors. It operates at intermediate spectral resolution (R~4,000 - 17,000, depending on wavelength and slit width) with fixed echelle spectral format (prism cross-dispersers) in the three arms. It includes a 1.8"x4" Integral Field Unit as an alternative to the 11" long slits. A dedicated data reduction package delivers fully calibrated two-dimensional and extracted spectra over the full wavelength range. We describe the main characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations.

The data reduction pipeline for the VLT 2nd generation instrument X-Shooter uses a physical model to determine the optical distortion and derive the wavelength calibration. The parameters of this model describe the positions, orientations, and other physical properties of the optical components in the spectrograph. They are updated by an optimisation process that ensures the best possible fit to arc lamp line positions. ESO Quality Control monitors these parameters along with all of the usual diagnostics. This enables us to look for correlations between inferred physical changes in the instrument and, for example, instrument temperature sensor readings.

The measured proper motion of Fornax, expressed in the equatorial coordinate system, is $(\mu_{\alpha},\mu_{\delta})=(47.6\pm 4.6,-36.0\pm 4.1)$ mas century$^{-1}$. This proper motion is a weighted mean of four independent measurements for three distinct fields. Each measurement uses a quasi-stellar object as a reference point. Removing the contribution of the motion of the Sun and of the Local Standard of Rest to the measured proper motion produces a Galactic rest-frame proper motion of $(\mu_{\alpha}^{\mbox{\tiny{Grf}}}, \mu_{\delta}^{\mbox{\tiny{Grf}}}) = (24.4\pm 4.6,-14.3\pm 4.1)$ mas century$^{-1}$. The implied space velocity with respect to the Galactic center has a radial component of $V_{r}=-31.8 \pm 1.7$ km s$^{-1}$ and a tangential component of $V_{t}=196 \pm 29$ km s$^{-1}$. Integrating the motion of Fornax in a realistic potential for the Milky Way produces orbital elements. The perigalacticon and apogalacticon are 118 (66, 137) kpc and 152 (144, 242) kpc, respectively, where the values in the parentheses represent the 95% confidence intervals derived from Monte Carlo experiments. The eccentricity of the orbit is 0.13 (0.11, 0.38), and the orbital period is 3.2 (2.5, 4.6) Gyr. The orbit is retrograde and inclined by $101^{\circ}$ ($94^{\circ}$, $107^{\circ}$) to the Galactic plane. Fornax could be a member of a proposed ``stream'' of galaxies and globular clusters, however the membership of another proposed galaxy in the stream, Sculptor, has been previously ruled out. Fornax is in the Kroupa-Theis-Boily plane that contains eleven of the Galactic satellite galaxies, but its orbit will take it out of that plane.

This article presents a measurement of the proper motion of the Sculptor dwarf spheroidal galaxy determined from images taken with the Hubble Space Telescope using the Space Telescope Imaging Spectrograph in the imaging mode.

This article presents a measurement of the proper motion of the Ursa Minor dwarf spheroidal galaxy determined from images taken with the Hubble Space Telescope in two distinct fields.

The STECF Calibration Enhancement effort for the Space Telescope Imaging Spectrograph (STIS) aims to improve data calibration via the application of physical modelling techniques. As part of this effort we have developed a model of the STIS CCD readout process. The model itself is described in some detail in earlier ISRs. Here we consider the application to STIS photometric data. We demonstrate that this approach can successfully remove the trails typically seen in CTE affected data and go on to ask whether this charge is being restored to the cores of detected objects in the correct quantities. We find good agreement between the simulation derived corrections and empirical corrections for a range of background and source levels. Moreover we find that, where the two differ, it is because only the simulation properly accounts for the charge distribution in the array.

The ST-ECF Calibration Enhancement effort for the Space Telescope Imaging Spectrograph (STIS) aims to improve data calibration via the application of physical modelling techniques. As part of this effort we have developed a model of the STIS CCD readout process. The model itself is described in some detail in earlier ISRs. Here we consider the application to STIS spectroscopic data. We find good agreement between the simulation derived corrections and empirical corrections for a range of background and source levels. Moreover we find that, where the two differ, because only the simulation properly accounts for the charge distribution in the array.

The Calibration enhancement effort for the Space Telescope Imaging Spectrograph (STIS) aims to improve data calibration via the application of physical modelling techniques. We describe here a model of the Charge Transfer process during read-out of modern Charge Coupled Devices, and its application to data from STIS. The model draws upon previous investigations of this process and, in particular, the trapping and emission model developed by Robert Philbrick of Ball Aerospace. Early comparison to calibration data is encouraging. Essentially, a physical description of the STIS CCD combined with the physics of known defects in the silicon lattice expected to arise in a hostile radiation environment, is enough to yield results which approximately match real data. Uncertainties remain, however, in the details of the model and the physical description of STIS.

We combine magnitude and photometric redshift data on galaxies in the Hubble Deep Fields with morphological classifications in order to separate out the distributions for early type galaxies. The updated morphological galaxy number counts down to I = 25 and the corresponding redshift distributions are used as joint constraints on cosmological models, in particular on the values of the density parameter Omega_{0} and normalised cosmological constant Lambda_{0}. We find that an Einstein - de Sitter universe with simple passive evolution gives an excellent fit to the counts and redshift data at all magnitudes. An open, low Omega_{0}, model with no net evolution (and conservation of the number of ellipticals), which fits the counts equally well, is somewhat less successful, predicting slightly lower mean redshifts and, more significantly, the lack of a high--z tail. A number conserving model with a dominant contribution from Lambda_{0}, on the other hand, is far less successful, predicting a much narrower distribution than seen. More complex models are obviously possible, but we conclude that if large scale transmutation between types does {\it not} occur, then the lambda-dominated models provide a very poor fit to the current data.

The interpretation of galaxy number counts in terms of cosmological models is fraught with difficulty due to uncertainties in the overall galaxy population (mix of morphological types, luminosity functions etc.) and in the observations (loss of low surface brightness images, image blending etc.). Many of these can be overcome if we use deep high resolution imaging of a single class of high surface brightness galaxies, whose evolution is thought to be fairly well understood. This is now possible by selecting elliptical and S0 galaxies using Hubble Space Telescope images from the Medium Deep Survey and other ultradeep WFPC2 images. In the present paper, we examine whether such data can be used to discriminate between open and closed universes, or between conventional cosmological models and those dominated by a cosmological constant. We find, based on the currently available data, that unless elliptical galaxies undergo very strong merging since $z \sim 1$ (and/or very large errors exist in the morphological classifications), then flat models dominated by a cosmological constant are ruled out. However, both an Einstein-de Sitter ($\Omega_{0}=1$) model with standard passive stellar evolution and an open ($\Omega_{0}=0.05$) model with no net evolution ({\it i.e.} cancelling stellar and dynamical evolution) predict virtually identical elliptical and S0 galaxy counts. Based on these findings and the recent reportings of $H_{o} \simeq 80$ km/s Mpc/s, we find that the maximum acceptable age of the universe is 13.3 Gyrs and a value of $\leq 9$ Gyrs favored. A flat---$\Lambda \neq 0$---universe is therefore {\it not} a viable solution to the $H_{o}$/globular cluster age problem.