This Resolution Team 3 (RT-3) report contains the results of the investigation of key aspects of the proposed Sample Clock Frequency Offset (SCFO) scheme for the Mid SKA1 telescope. This is a scheme, first proposed by one author (Carlson) at a meeting at the SKAO 25-Jan-2013, to digitize the analog signal at each antenna at a slightly different sample rate and transmit the data to the CSP Mid.CBF for subsequent digital re-sampling to a common sample clock frequency before channelization, correlation, and beamforming. The primary purpose for doing this is to cause de-correlation of sample clock-related self-interference to be able to improve correlated and beamformed signal quality. This report includes an investigation of the efficacy of the method, investigation of its implementation by SADT, DISH, and CSP, presentation of further supporting modeling results augmenting the original modeling work, a note on expansion to SKA-2, as well as possible draw-backs and concerns. Finally, there are potential additional benefits in signal quality in implementing the SCFO scheme, in particular de-correlation of aliased RFI (particularly for Nyquist Zone-2 digitized signals) as well as relaxation of signal-chain anti-aliasing filters transition band roll-off and reject band attenuation prior to digitization in the antenna.

This paper describes the technical details and practical implementation of the Mid-Frequency Square Kilometre Array (SKA) phase synchronisation system. Over a four-year period, the system has been tested on metropolitan fibre-optic networks, on long-haul overhead fibre at the South African SKA site, and on existing telescopes in Australia to verify its functional performance. The tests have shown that the system exceed the 1-second SKA coherence loss requirement by a factor 2560, the 60-second coherence loss requirement by a factor of 239, and the 10-minute phase drift requirement by almost five orders-of-magnitude. The paper also reports on tests showing that the system can operate within specification over the all required operating conductions, including maximum fibre link distance, temperature range, temperature gradient, relative humidity, wind speed, seismic resilience, electromagnetic compliance, frequency offset, and other operational requirements.

Adding VLBI capability to the SKA arrays will greatly broaden the science of the SKA, and is feasible within the current specifications. SKA-VLBI can be initially implemented by providing phased-array outputs for SKA1-MID and SKA1-SUR and using these extremely sensitive stations with other radio telescopes, and in SKA2 by realising a distributed configuration providing baselines up to thousands of km, merging it with existing VLBI networks. The motivation for and the possible realization of SKA-VLBI is described in this paper.